• Vid 0011 pid 7788 firmware. Free programs for repairing flash drives

    Transcend removable storage devices are widely used a large number users all over the world. It’s not surprising, because these flash drives are very inexpensive and last quite a long time. But sometimes some kind of misfortune happens to them - information is lost due to damage to the drive.

    This can happen for various reasons. Some flash drives fail because someone dropped them, others simply because they are old. In any case, every user who has removable media company Transcend, should know how to recover data on it if it has been lost.

    There are proprietary utilities that allow you to very quickly recover data from Transcend USB drives. But there are also programs that are designed for all flash drives, but they work especially well with Transcend products. In addition, it often helps when working with flash drives from this company standard way Windows data recovery.

    Method 1: RecoverRx

    This utility allows you to recover data from flash drives and protect them with a password. It also allows you to format drives from Transcend. Suitable for absolutely all removable media from Transcend and is proprietary software for this product. To use RecoveRx for data recovery, follow these steps:


    Method 2: JetFlash Online Recovery

    This is another one proprietary utility from Transcend. Its use looks extremely simple.


    Method 3: JetDrive Toolbox

    Interestingly, the developers position this tool as software for Apple computers, but it works very well on Windows too. To perform a restore using JetDrive Toolbox, follow these steps:


    JetDrive Toolbox actually works exactly the same as RecoveRx. The difference is that there are many more tools.

    Method 4: Transcend Autoformat

    If not one of the above standard utilities recovery does not help, you can use Transcend Autoformat. True, in in this case The flash drive will be immediately formatted, that is, there will be no chance of extracting any data from it. But it will be restored and ready for work.

    Using Transcend Autoformat is extremely easy.

    1. and run it.
    2. At the top, select the letter of your storage medium. Below, indicate its type - SD, MMC or CF (just check the box next to the desired type).
    3. Click on the button Format" to begin the formatting process.

    Method 5: D-Soft Flash Doctor

    This program is famous for running at a low level. Judging by user reviews, it is very effective for Transcend flash drives. Repairing removable media using is carried out as follows:


    If repair using all the above methods does not help restore the media, you can use standard means Windows recovery.

    Method 6: Windows Recovery Tool

    Judging by the reviews, these 6 methods are the most optimal in the case of a damaged Transcend flash drive. Less efficient in this case is the EzRecover program. Read how to use it on our website. You can also use programs and. If none of these methods help, your best bet is to simply buy a new removable storage device and use it.

    I had a little trouble. A 32 GB flash drive from transcend has stopped working. That is operating system doesn't see her. And it’s not that there was very valuable information there, but because of the large volume, it became a pity to throw away the flash drive “without a fight.”

    Using standard JetFlash utilities Recovery Tool The device could not be revived. I had to look for another way. After a little googling on the topic of how to restore a flash drive, I found it directly from the manufacturer online service for firmware.

    For obvious reasons, the service only supports devices manufactured by Transcend. If it happens to your flash drive that it refuses to be detected in the system or some other malfunction occurs. Don’t rush to throw it away, but try to restore it using an online recovery service.

    It was with his help that I managed to restore the functionality of my flash drive.

    For greater clarity, I recorded a video on how to restore a flash drive using the transcend service:

    To use the transcend flash drive recovery service, you need to go to the website by entering address bar your browser at the following address: http://ru.transcend-info.com/support/DlCenter/DLSoftware.asp?SID=3

    So, go to the service page. Select the type of your device.

    To download the program you will need to register.

    You will be prompted to download the OnlineRecovery program. It should be noted here that administrator rights are required for the program to work! Therefore, you need to run the utility as an administrator.

    After starting the program, you need to select the size of the drive to be restored. In my case it’s 4 gigabytes, and click “OK”

    While the program is running, do not disconnect the Internet connection!

    After the program checks the flash drive, you will be prompted to restore the device without saving data, or you can try to restore the information.

    We press start.

    That's it. We wait for the process to complete, then remove the flash drive and check its functionality.

    In this article, I wrote how to restore a transcend flash drive using the manufacturer’s standard service.

    Thus, I managed to recover two flash drives of 32 and 4 gigabytes. I hope this method will help you too. Good luck.

    Greetings to all blog readers!

    Probably most people who work with a computer more or less often have a flash drive (or even more than one). Sometimes it happens that a flash drive stops working normally, for example, due to unsuccessful formatting or as a result of some errors.

    Quite often file system can be recognized in such cases as RAW, the flash drive cannot be formatted, it cannot be accessed either... What to do in this case? Use this small instruction!

    These instructions for restoring the functionality of a flash drive are designed for the most various problems With USB media, except for mechanical damage (the manufacturer of the flash drive can, in principle, be anything: kingston, silicon-power, transced, Data traveler, A-Data, etc.).

    And so... let's get started. All actions will be described step by step.

    1. Determining the parameters of the flash drive (manufacturer, controller brand, amount of memory).

    It would seem that it is difficult to determine the parameters of a flash drive, especially since the manufacturer and amount of memory are almost always indicated on the flash drive body. The point here is that USB drives of even one model range and the same manufacturer can have different controllers. A simple conclusion follows from this - in order to restore the functionality of the flash drive, you must first accurately determine the brand of the controller in order to choose the right utility for treatment.

    A typical type of flash drive (from the inside) is a board with a microcircuit.

    To determine the brand of the controller, there are special number-alphabetic values ​​specified by the VID and PID parameters.

    VID - vendor ID
    PID - Product ID

    They will be different for different controllers!

    If you don’t want to kill the flash drive, then under no circumstances use utilities that are not intended for your VID/PID. Very often, due to an incorrectly selected utility, a flash drive becomes unusable.

    How to determine VID and PID?

    The easiest option is to launch a small free utility CheckUDisk and select your flash drive from the list of devices. Next you will see all the necessary parameters to restore the flash drive. See screenshot below.

    VID/PID can be found without using the utility.

    To do this, you need to go to Device Manager. In Windows 7/8, this is conveniently done through a search in the control panel (see screenshot below).

    In the device manager, the flash drive is usually marked as “USB Mass Storage Device”, you need to right-click on this device and go to its properties (as in the picture below).

    In the “details” tab, select the “Equipment ID” parameter - the VID/PID will appear in front of you. In my case (in the screenshot below) these parameters are equal:

    2. Search necessary utility for treatment ( low level formatting)

    Knowing the VID and PID, we need to find a special utility suitable for restoring our flash drive. It is very convenient to do this, for example, on the website: flashboot.ru/iflash/

    If suddenly nothing is found on the site for your model, it is best to use a search engine: Google or Yandex (query like: silicon power VID 13FE PID 3600).

    In my case, the Formatter SiliconPower utility was recommended for a flash drive on the flashboot.ru website.

    Actually, that's all. Of course, this recovery instruction is not the simplest (not 1-2 buttons to press), but it can be used in many cases, for almost all manufacturers and types of flash drives...

    All the best!

    Almost every person who is in one way or another connected with computers has at least once encountered the problem of a flash card malfunction. It can be expressed in different ways: Windows does not see the flash drive, refuses to format it, failures occur when copying and moving files, or the wrong amount of memory is determined.

    Restore Kingston drive possible using special software

    Most simple cases can be cured by simply formatting the flash drive using the Windows operating system. To do this, you need to insert it into the computer and after identifying it, go to My Computer, right-click on the drive and select Format. After successful formatting, the system will notify you about this.

    If, after formatting, problems remain or it ends in failure, for example, the operating system generates an error - “Windows cannot complete formatting,” then you need to try another method. For example, Kingston provides for its drives special means to restore their functionality. The Kingston flash drive recovery program can be easily downloaded from the company’s official website, in the support section. After downloading, you need to unpack it and run it. In the window that opens, select the required drive and click Format. After formatting in a special way, the flash drive should work.

    Another method worth trying is to use a low-level formatting program. Such a program, for example, D-Soft Flash Doctor or similar. It is not targeted at any specific drive or manufacturer, so it can format any flash drives and memory cards.

    If all these actions lead to nothing, then there are serious problems with the controller.

    Restoring a Kingston flash drive using firmware

    You can restore a flash drive by using a special utility for low-level firmware of its controller. But there are situations when the device really cannot be helped by anything other than physical intervention, such as soldering or connecting to special devices.

    If the drive has the following viability criteria, then there is still a chance to restore it:

    • Windows detects the flash drive when it is plugged into the computer port;
    • after inserting the flash drive into the connector, the system automatically asks for formatting;
    • the drive identifies itself, is visible in the system, and when accessed, the message “Insert disk...” is displayed;
    • systematic errors when copying or moving files to a flash drive;
    • Slow speed of the drive as a whole.

    Before you restore the Kingston flash drive, you need to find out the controller identifiers. You need two of them, the first one is VID, which contains the manufacturer’s identifier. The second is PID, which stands for product code. You need to define them with a utility like Flash Drive Information Extractor. Once you receive them, you can write them down somewhere.

    Finding a recovery utility

    Directly for the firmware you will need special utility, capable of flashing a flash drive controller at a low level. Such special programs Usually available only from equipment manufacturers. With their help, they carry out initial firmware, repair and testing of devices. Sometimes these utilities end up online by accident, and sometimes manufacturers share them. But the whole problem is that each manufacturer has its own utility, which can be different depending on the controller model and the amount of memory.

    To search the desired program It is for the model being reanimated that SID and PID will be needed. There is one service on the network called Flashboot.ru, which stores thousands of utilities for firmware various devices and gadgets.

    You must enter the received numbers into the SID and PID fields and click search. The service can display several program options at once. You need to choose the one whose description indicates the corresponding volume of the drive being restored. The list may also contain utilities for other manufacturers. You need to remember that you need to restore Kingston flash drive, therefore, the most suitable configuration is selected from the list. The Utils field describes the name of the program. After finding the desired line in the list, you need to copy the name of the utility and go to the files section of the flashboot.ru website. You need to paste the copied name into the search bar and click find.

    After finding the utility, you need to download it to your computer and unpack it. Sometimes a situation arises when the program you are looking for is not in the files. Then you can simply search for her by name in any search engine.

    Using a program to recover a Kingston flash drive

    Using the utility is the most simple part operations. You just need to insert the USB flash drive, launch the program and click on the Start button in the program. Of course, the design, localization and operating methods of different utilities for different flash drives may be different, but the essence is the same, and it is intuitive. After successful firmware controller, the operating system may immediately offer to format the revived flash drive.

    If all else fails

    If nothing helped or the utility was never found, then this means that, most likely, one of the modules of the drive’s electrical circuit is physically damaged. In such a situation, only a service center can help. Specialists will be able to physically connect to the contacts of the flash drive and analyze or scan for damage. If the flash drive can be repaired, then it will be repaired, but if not, then nothing will help it.

    You probably won't find many users personal computer without a flash drive in your pocket, because this device is very convenient, portable, you can quickly write files and today it is inexpensive. But flash drives tend to break, like everyone else electronic devices. Often a flash drive breaks after a month and of course this situation is not very pleasant. Also characteristic flash drive recovery, if you read this article carefully.

    The main reasons for the failure of a flash drive are: unsafe removal of it from the USB port, if you did not wait until the files were completely copied from hard drive computer to a flash drive or vice versa, viruses and so on. There may be many reasons, but I think this is not important for you, the most main question This flash drive recovery.

    Recovering a flash drive by formatting it

    If it is possible to format a flash drive and the system does not refuse this action, then it is better to start with formatting. In the operating room Windows system There is a built-in formatting utility. There are also separate utilities for formatting flash drives, for example, .

    If this does not help, then you can use the low-level formatting utility. Just don’t get confused when choosing a flash drive hard drive, otherwise you can format it. So be careful!!!

    If formatting a flash drive fails, do not despair. Perhaps the controller has failed and can be reflashed.

    Determining, searching and flashing the flash drive controller

    In order to flash the controller you need to find out its model and manufacturer, or rather VID, PID And VendorID. You won’t know it just like that, so you’ll need a utility; if this utility didn’t help, you can also use the utilities USBdeview or ChipGenius. But it seems, no matter how long I haven’t used it, the utility CheckUDisk It works flawlessly and provides the necessary information.

    Even if the flash drive is not detected as a drive, but the operating system sees it as a device, then the utility determines VID And PID. Therefore, we insert the flash drive into the USB port and run the utility CheckUDisk. We only need VID, PID And VendorID, in my case VID=0951 And PID = 1613, A Vendor ID: Kingston.

    Next, you need to look for a utility for flashing the flash drive controller using these attributes. To do this, follow the link and enter the model in the required fields of the site and click on the button Find. After which a list of flash drive models with utilities for flashing the controller firmware will be displayed. And here we need to find suitable option. I advise you not to close it, and if you close it, run the CheckUDisk utility, so that when searching you can look at other attributes of the flash drive to make your search easier.

    In my case, there are quite a few options on the list, so there is a lot of choice. Here you need to choose a more suitable one. We work in two windows, where there is one site flashboot.ru, and the other utility window CheckUDisk. Some utilities for firmware have the same name as different models flash drives, they are just compatible.

    Of course, it may not work out right away, but don’t get upset right away. We return to the list of utilities for flash drive controller firmware and we are looking for a similar one. Often there is more than one utility in the database that is suitable specifically for our flash drive. For example, I didn’t succeed the first time either, I had to experiment. Flash drive recovery as I wrote, it requires perseverance and the ability to experiment.

    I hope this information will help you and your flash drive will be filled with files again. And you had a blog about.

    Read more: