• Zyxel keenetic ultra firmware from a bootable flash drive. Firmware Zyxel Keenetic Lite

    Today we'll talk about how to flash router Zyxel Keenetic. In order for the router to always work stably and support all existing communication standards and connected devices, it is necessary to regularly update the firmware - that is, its “ operating system" This can be done in two ways. Automatically from the official website, or through the admin web interface by manually selecting the firmware file. This procedure is relevant for any model in the series Zyxel Keenetic- Lite, Omni, 4G, Giga and so on.

    How to download firmware for Zyxel Keenetic router?

    In order to install new firmware, go to the address 192.168.1.1. Here on home page contains summary information about the current operation of the router.

    Before flashing the Zyxel Keenetic router firmware, first of all, be sure to connect it to the computer via a cable. Otherwise, if there is any unexpected failure during flashing, the router may stop working altogether. In addition, it is recommended to do backup copy settings.

    We are most interested in the point “ Updates" - if there is a new version of the firmware, it will say "Available". Also pay attention to one more point above - “ NDMS version" This is the number current firmware Zyxel, you will need it if you need to download the file manually.


    For Zyxel Keenetic firmware automatic mode click on this link to open new page With installed components microprograms A pop-up window will appear on it - leave everything as it is and click on the “Update” button

    The flashing will begin on its own, but sometimes in automatic mode an error appears about the inability to load the firmware file due to insufficient memory. In this case, you will have to update manually.

    How to flash a Zyxel Keenetic router manually?

    To do this, go to the keenetic.net website in the “Support - Download Center” section.


    In the “Files” block, click on the “Show all articles” button

    and find your device by model - Keenetic Lite, 4G, Giga, Omni, Ultra, Viva, etc.

    And here on the page specific model router, we are looking for the most latest firmware- I have it dated 2015-07-06 and have the number “NDMS v2.04(BFW.2)C7”.


    We compare it with what is indicated on home page web interface of the Zyxel Keenetic control panel. If the firmware file is newer, then download it and unzip it to your computer.

    How to update the firmware of the Zyxel Keenetic router?

    Now the only thing left to do is update the firmware of the Zyxel Keenetic router. To do this, go back to the router control panel, go to the “System” tab


    We will be asked again about the correctness of the selected action - confirm with the “OK” button

    We wait until the update is completed, after which the router will reboot.
    After which we are presented with new firmware Keenetic - awesomely fresh and beautiful

    By the way, in this updated version The flashing section is located in the menu " General settings" The function is very conveniently integrated here automatic search latest Keenetic OS software and updates in one click on a button or even automatically.

    Alternative firmware - OpenWRT and From Oleg

    As with many other router models, there are other firmware versions for Zyxel Keenetic from third-party developers. The most popular OpenWRT and the so-called From Oleg". In theory, they implement more features than in the standard branded one. However, their use was most relevant at the time when the Zyxel Keenetic was equipped with firmware and . However, much of what was in the custom versions has been introduced into the modern operating system. Plus, the interface of the OpenWRT control panel and “From Oleg” is not as intuitive as in Keenetic OS. Therefore, I would recommend using them only if you are well versed in all the intricacies of setting up a router.

    Video on how to flash Zyxel Keenetic

    Internet center Zyxel Keenetic Lite - a basic device for home use. Router with good parameters And nice price has become a favorite of many users because it contains everything necessary for a stable Internet connection. This model was finalized and improved by the developer, resulting in the birth of next versions- Zyxel keenetic Lite ii and Zyxel keenetic Lite iii.

    Setting up the Internet on different models no different

    Let's find out how the three router models differ from each other, how to configure the Zyxel Keenetic Lite router and replace the firmware.

    We will start our review of routers with the first model, Zyxel Keenetic Lite - the router has an attractive appearance, embodied in a snow-white body, a combination of matte and glossy surfaces and the proprietary relief of the material by which this brand is recognized.

    In most cases, Zyxel Keenetic Lite and its older brothers are equipped with external antennas that provide a strong signal and a large area Wi-Fi coverage for the whole apartment and even a small office.

    But the Zyxel Keenetic Lite 2 and Zyxel Keenetic Lite 3 models are different appearance- they are made in black color, and unlike the first version, they are equipped with two antennas, which increases the coverage area of ​​the Wi-Fi connection.

    How does the Zyxel Keenetic Lite 3 router differ from previous versions? In it, the antennas are moved to the side parts of the case, and at the back there is a switch for the modes of operation of the router - it is difficult to judge its practicality, it all depends on how a particular person uses it.

    In all three devices provided indicator lights, five connectors, four of which are LAN format and one WAN type for connecting a network cable. The internal content of the models is slightly different - the first version has a smaller volume RAM and a maximum speed of 150 Mbit/s, while for versions 2 and 3 these figures are twice as high.

    What can I say about speed? Both at 150 and at 300 Mbit/s, such parameters are more than enough for home use or installing a router in a small office. Zyxel Keenetic Lite 3 and other routers will cope well with connecting several devices at the same time, reviews indicate that they do not “cut” the speed, there are no interruptions or problems in the connection.

    Considering the fact that users often install Internet speeds of up to 100 Mbit/s, the initial data is enough for comfortable use of these devices. Otherwise, the routers are almost identical - the first version has a slightly weaker hardware, the next two are the same, except that the Lite III has a different revision of the chip, which, by the way, is quite good in these devices.

    The process of setting up a connection and changing the firmware is common to all three models; as before, it is quite simple for anyone, even the most unenlightened user, as you can see in the following review.

    Setting up the Internet on Zyxel Keenetic Lite I, II, III

    Configuration using a special wizard

    A big and significant advantage of the Zyxel brand is that it has created a quick Internet connection setup. If you need to connect to versions 2 and 3 without understanding the parameters, it is advisable to do the following:

    • Log into the router’s web interface through a browser by entering the combination 192.168.1.1 in the address bar.

    • Select master quick setup, where you are asked to specify the required parameters step by step.

    • Choose how to use the MAC address - you need to enter it if required by your provider. If it is not needed for the connection, select the appropriate line.

    • Specify the method for obtaining an IP address on the router - automatic or manually entered. If you select the last option, enter the combination of address, numbers for DNS and other information specified in the contract.

    • Next, enter your login and password to access the network - if they are not needed, check the box next to “I don’t have a password to access the Internet.” If they are in the contract, they must be indicated.

    • Afterwards the connection status window with all parameters will be displayed.

    Detailed equipment setup

    If you want to change individual settings, re-establish the connection, or configure the connection yourself, when entering the settings on the Zyxel Keenetic Lite 2, click on “Web Configurator” instead of quick setup.

    • After logging in, you are prompted to change the access key to the settings menu - do this to protect your device from third-party interference.

    • To configure the network, select the Internet menu at the bottom and open the connection from the list that appears.
    • You will see a form for setting connection parameters - if you have a simple NAT connection with a dynamic address, select to automatically receive it in the Configuring IP parameters line. If your provider uses a static IP, you must enter it in the appropriate fields, enter the subnet mask and gateway.

    • To establish an L2TP connection on your router, follow these instructions:
      1. In the Internet section, Connection tab, select the existing connection again, in the form, mark the lines “Enable” and “Use to access the Internet”, connector with network cable and obtaining IP automatically.
      2. Go to the PPPoE/VPN menu and create an authorized connection - mark the first two lines, indicate the protocol, “Connect via” Broadband connection ISP, server address, name and password, obtaining an IP address automatically.

    • Internet installation for PPPoE type done this way:
      1. In the form in the Description, enter Broadband connection, select the IP settings setting “Without IP address”.
      2. Make sure that the “Enable” and “Use to access the Internet” items are activated, and that the connector where the network cable is connected is marked on the diagram.
      3. Return to the Internet section and open another tab - PPPoE/VPN to create an authorized connection.
      4. Click on “Add connection” and in the form that appears, mark the first two lines, enter a description (network name, arbitrary), select the protocol type, in “Connect via” - Broadband connection ISP. You also need to write the login and password from the contract and select to automatically obtain an IP address.

    Wireless connection

    To configure Wi-Fi module you should go to the web menu of the router settings - it doesn’t matter which of the three in question, select the section with the same name at the bottom of the window.

    In the Access Point tab, activate the module, come up with a name for the network - if necessary, you can make it invisible, which will further secure the connection; create a password.

    Software replacement

    Changing the firmware to versions 1, 2 and 3 is quite simple; it is advisable to follow these instructions:

    • Download current version save the firmware developed for your router model on your computer.
    • Enter the router settings through the browser, select the System section, Firmware menu.
    • In the window that appears, specify the path to the firmware file, click “Update”.

    Summing up the review, we can say that routers from the Keenetic Lite line are definitely worthy devices - good hardware, high speed connections without interruptions, attractive design And powerful antennas, and most importantly, a simple and clear interface for settings and changing firmware made them one of the best Internet centers in their category. To the listed advantages it is worth adding affordable price, fully justified by quality - this is really important when choosing network equipment. Therefore, Zyxel Keenetic Lite routers can certainly be recommended for purchase, and the choice of model depends on your requirements and taste preferences.

    The current situation is that tested software is rarely completed at the same time as the device is released. And manufacturers have to release firmware updates after the router goes on sale. At the same time, correcting bugs and shortcomings suddenly found by users.

    Any router is equipped with firmware that performs the functions of transport encryption, data creation, transmission, sending packets, connections, and so on. Standards have the unpleasant property of being edited, and a router with outdated firmware may not function in the new standards. Shouldn’t we throw away a perfectly functioning device just because it’s incompatible with the new required standards?

    In such cases, updating the firmware of the ZyXel Keenetic Giga router solves the problem, since it is nothing more than replacing the old router software with fresh ones. But, unlike the update regular program, updating microcode contains some risk and may, in some cases, lead to total loss router performance. In order to protect yourself from such a misunderstanding, follow the instructions on this page before and during updating the firmware of the ZyXel Keenetic Giga router, in order to reduce the likelihood of damage to the device to nothing.

    How to update the firmware of the ZyXel Keenetic router?

    First of all, you need to go to ZyXel Keenetic Giga router control panel. To do this, enter router specified in the instructions, for example 192.168.0.1 or 192.168.1.1. Enter the administrator login and password and open the “Firmware update” or “Firmware update” menu item. If a microcode search and download system is integrated into the router, all you have to do is follow the tips below and click on the “Run” button. But when there is no such option, the firmware should be downloaded from the official website and its path selected on the computer.

    Carefully check whether the firmware downloaded from the manufacturer’s website matches your router. You will probably be surprised to learn that nowadays not every manufacturer bothers to build an identification system into their routers program code. Naturally, if the firmware of the ZyXel Keenetic Giga router is replaced with firmware from a similar router, the router will stop working and, as a rule, it must be taken to a service center.

    Provide the computer from which you install latest firmware for the ZyXel Keenetic router with an uninterruptible power supply, for example, by connecting it to a device like a UPS. No one is immune from a power outage, and if the power goes out during the microcode update process, with a 95% probability, the ZyXel Keenetic Giga router will have to be slowly packed into a box and taken to the service center.

    Before starting the firmware, remove all connecting cords from the device, leaving only the cable from the computer that will be used to flash the firmware. It is highly undesirable for packet transmission signals to be sent to the router during the update. Not all routers adequately respond to such packets during flashing. To prevent this from happening, update by booting into safe mode mode with network support. This way you will know that no program will go online for an update or for any other reason.

    Reset the router settings, most often this can be done by pressing the “Reset” button located on the back of the router case. The fact is that after flashing the software, in 50% of cases the router has to be configured again to avoid inconsistencies with the configuration file created previous versions firmware.

    After updating the router and receiving a message about its successful completion, turn it off and on, and then re-enter the settings given by your provider.

    Zyxel Keenetic Start- an excellent router for the home. The model is positioned as the “little brother” of the brand’s more powerful previous routers, but contains maximum functions for normal use. Unlike other devices, the router has a pleasant low price, which did not affect excellent quality, inherent in all models of this brand.

    The router has a low price, but is not inferior in quality to expensive models

    Let's take a closer look at the review of the functions of the Zyxel Keenetic Start router and find out how it is configured and flashed.

    Externally, the router differs little from standard routers - unobtrusive design, black body and external antenna. His maximum speed is about 150 Mbit/s, which is quite enough for one user and a group that can be created within a local network. It provides IPTV functions, creating another access point for guest use.

    For protection, there are all the latest protocols and a firewall that will allow you to secure your connection. In addition, the router is extremely easy to configure, so you can install it yourself to use the Internet.

    Equipment setup

    To install and configure, connect Zyxel Keenetic Start to your computer, then do the following:

    • Log in to your router settings: address bar browser, enter the value 192.168.1.1, after which the configuration explorer will immediately appear in front of you.
    • Select Quick Setup.

    • A MAC address selection window will appear in front of you. If the provider does not register it, then indicate this option. If your service provider registers addresses that have previously used the Internet on this PC, then select the following suitable option. In the case when both options are not suitable, you need to call the support service and tell them to register the address of the Kinetic Start equipment with the provider - you will see it on the bottom of the case.
    • Next, specify the type of connection via IP - mainly the Internet comes with automatic detection addresses.

    • In the next menu you specify your login and password to connect to the Zyxel Keenetic Start network. There are several options for action here - if the provider uses Dynamic IP technology, then you check the line “I do not have a password to access the Internet.” If access is carried out using the PPPoE or L2TP, PPTP protocols, then you should indicate the data from the service provider’s contract.
    • After all the steps, a connection to the Internet should occur - basic setup completed.

    When you have finished performing the quick setup, use the “Web Configurator” button to go to the menu for other router parameters.

    If after a quick setup the Internet does not work, then enter the connection data again, follow these recommendations:

    • Go to the PPPoE/VPN section.
    • Enter the connection data - turn on the network and activate the “Use to access the Internet” line, enter your username and password, select the connection type and other parameters.

    When you first enter the advanced settings, a window appears to change the login and key to enter the configuration interface - this is done for security purposes so that no one can hack the network, so come up with your username and password.

    Connecting to Wi-Fi

    When a connection is established on the Zyxel Keenetic Start router, it is immediately activated Wi-Fi distribution, but many people ask the question: “If we did not enter the network name or password, how can we establish a connection from the rest of our equipment to the Internet via Wi-Fi?”

    The answer is that the network receives a name and password automatically when the equipment is installed, and to find out this data, look at reverse side router.

    It is noteworthy that each router of this brand is assigned its own combination, which is more secure than in the case when at first there is no password and login for Wi-Fi, and the network is open to all users.

    If you want to change the default network name and password, follow these instructions:

    • Go to the router settings and select the Wi-Fi network section.
    • Open the Access Points tab and set a new network name, key combination, select the WPA2-PSK encryption type (it is the most reliable for protection against hacking).

    Note. When changing the SSID in Zyxel Keenetic Start, there is a “Hide Network” function at the bottom, with which you can make the access point invisible. In this case, other users will need to manually add a network, enter its name and password in order to receive an Internet connection, which will additionally protect you from interference by third-party equipment.

    Firmware installation

    From time to time, errors and malfunctions appear in the operation of the Wi-Fi router, which is why you need to reinstall software. But even if the router works without failures, it is worth updating the firmware from time to time, because the manufacturer is constantly improving the firmware for its correct operation.

    You can update the firmware through the options menu, but if you want to manually install new software, then follow these steps:

    • Download installation file from the Internet (make sure it was designed specifically for the Zyxel Keenetic Start model). After downloading, unzip the archive.
    • Go to the settings menu, System section, open Files.
    • Find the Firmware file in the list, click on this line - a window will appear in front of you to select new firmware.
    • Specify the path to the file, click on “Replace”, after which the firmware for the router will be updated.
    • After completion, the equipment will reboot within a few seconds, due to which the menu will be inaccessible for about a minute.

    You will see information about installing a new firmware version by viewing the first window of the configuration menu, where the current state of the router is indicated.

    By following the instructions above, you can connect Zyxel Keenetic Start to the Internet, set up a Wi-Fi connection and flash the router firmware. This equipment will allow you to use high speed connection with a high-quality and powerful signal.

    Zyxel Keenetic Internet centers are multifunctional devices that allow the user to solve a wide variety of management tasks local network and access to the Internet. This multifunctionality is provided by the NDMS operating system. Therefore, if we talk about updating the firmware of Keenetic devices, then this process is identical for most routers of this model range where this operating system is used. Let's look at how this is done using the Zyxel Keenetic 4G router as an example.

    NDMS is a fairly flexible operating system. It can be updated in several ways. Let's look at them in more detail.

    Method 1: Update via the Internet

    This method of updating the firmware is the most optimal. It does not require any specific knowledge from the user and almost completely eliminates the possibility of error on his part. Everything is done in a few clicks of the mouse. To start the update process, you must:


    After the process is completed, the router will reboot and you will see the following message in the system monitoring window:


    This means that everything went well and the most latest version firmware.

    Method 2: Update from file

    In cases where there is no Internet connection or the user prefers to update the firmware in manual mode, NDMS provides the ability to update from a previously downloaded file. All actions are carried out in two stages. First you need to do the following:

    After the file with the firmware is saved in a convenient place on the computer for the user, you can proceed to direct process updates. For this you will need:


    After selecting a file, the button is activated "Replace", by clicking on which you can start the firmware update process. As in the previous case, everything will take a few minutes, then the router will reboot with new version NDMS.

    These are the ways to update the firmware on Zyxel Keenetic Internet centers. As you can see, there is nothing complicated in this procedure and even novice users can do it.

    Read more: