iPhone 7 white screen what to do. White screen on iPhone

If your iPhone turns off and the screen turns white, it means that the operating system has shut down to prevent subsequent critical errors that may occur if the device breaks down. The reasons for the appearance of a white screen may be software errors, faulty parts, or incorrectly installed or inappropriate drivers. Also, a white screen may appear if the device falls to the ground or hits any hard surface. Let's figure out how you can fix the white screen of death problem yourself.

So, your iPhone is broken, you've clicked everything you could many times, tried everything in your power, but nothing has changed. The best solution to this problem may be to try flashing the phone's firmware. This method is the most correct for problems with software. But if you dropped your phone and the problem is technical damage, then you can try to disassemble the device if the warranty has already expired. If the warranty period has not yet expired, you should take the phone to service center Apple, where the problem will be fixed by professionals.

If the warranty period has nevertheless expired, then disassemble the phone and find stickers marked with numbers from 1 to 6. Label No. 1 is the cable that connects the device to the screen. If you don't see label #1, it may be stuck to the screen and you need to peel it off. If cable No. 1 is disconnected from its slot, then insert it into place.

iPhone disassembly

The video demonstrates the disassembly process iPhone cases.
To remove the back cover you will need tools: a screwdriver and a suction cup. Watch the video below to see how to use them:

Software problems This can often be resolved by pressing the power button on top and the sleep button at the same time. Press and hold these buttons for 10-15 seconds and let the iPhone reboot. After this it should appear Apple logo on a black background. If this happens, congratulations! If not, then the problem is much more serious and you should take the phone to a specialized service center.

If you see gray lines on the screen, then there is most likely a problem with the screen.

Also, in some cases, reinstalling cables No. 2 and No. 3 may help.

White screen- this is far from the only problem that can arise in iPhone work. There are times when customers complain about inability to send a message, defects in the communication process or lack of vibration. In the simplest cases, you know what can be done. But in any case, remember that this device is a smartphone, so fixing it is much more difficult than regular phone. Thus, it is better to always contact service centers, otherwise your efforts can only make the situation worse.

Repair at the Apple Telemama service center

DIY repair

Our advantages

1. Spare parts. In our service center you can always buy only high-quality and original parts.
2. Price. You can always buy spare parts from us at a low cost. All purchases from us are made in large quantities, which allows us to offer low prices.
3. Repair time. If you have limited time, we can replace displays, speakers, and connectors in just 20 minutes. If you have a complex breakdown, we recommend making a diagnosis, which takes 20 minutes.
4. Guarantee. After the repair, we issue a 1-year warranty.

If your iPhone needs urgent repairs, we will be happy to fix it. Do not try to fix the breakdown yourself, because it is difficult to fix. self-repair. You can personally come to our Telemama service center. Here we will quickly fix this problem. You can also use courier service, which will deliver the phone to us.

Here you can get your device diagnosed completely free of charge. Only after agreeing with you on the cost of repairs and all necessary work that need to be done, we get to work. We install only proven, high quality parts from reliable suppliers. You can entrust your phone to our engineers who have extensive experience.

After the repair, you can come to us yourself and pick up the iPhone. You also have the opportunity to use the service of a courier who will bring the repaired device to your home. We provide all our clients with a 1-year warranty. After repairs in the future, you have the opportunity to repair equipment at a discount. If your friends ask you why? Make them happy too, let them tell you your order number, and they will also receive a discount.

Once I published it on my site, then I joined this community. So I decided to duplicate it, just in case. You never know, maybe someone will find it useful.

I’ll share how I fought this terrible monster - the white screen. iPhone death. In short, it was like this: either karma formed, or it was just time, but my iPhone also received a white screen of death. The iPhone hit the floor, courageously remained silent, but at the same time was offended and showed a fig white screen. No reboots, system restoration could not bring him out of this trance, and since I was in no place at that time. official dealer At the very least, you couldn’t find an i-workshop during the day (in Sihanoukville, in short), so I had to deal with the treatment of the i-thing on my own. Unfortunately, it was not possible to find more or less detailed guide to combat this scourge, so for those who will ever encounter a similar problem, I offer this detailed instruction.

To begin with, a short excursion into what they are, white screens of death (in English, White Screen of Death, also known as WSOD).

1. The most banal option - software error- can be treated simply by rebooting the iPhone in the so-called DFU Mode. At the same time, YouTube is full of stupid videos on how to do this reboot (look for " iPhone DFU Mode" and you will find it). The meaning is simple - you just need to press simultaneously Home button and the iPhone on/off button"a. Another method, if the first one does not work, first press the Home button, then the Volume Up button, then the on/off button. And hold until the reboot, i.e., until the white screen disappears and the Apple logo appears. After this, if the problem is really software, the iPhone should return to working condition until the next white screen. Because if the problem is software, then there is a high probability that it will make itself felt again - therefore, Apple, in principle. willingly exchanges such problematic (officially purchased) phones.

2. Things are worse if the white screen is caused by a hardware problem. And here you will have to tinker. Let's say you dropped your iPhone and it gave you a white screen, and rebooting into DFU Mode didn't help. I’ll say right away that no restore via iTunes will help you either, and don’t even try. Three options for what happened to your favorite iPhone:

Option one. One of the contacts connecting the LCD panel to the main unit simply came off.

Option two. The LCD panel is covered with a white basin. I note that this means that you will have to buy a new one.

Option three. The digitizer, which is responsible for the touch functions of the screen, was covered. Or the digitizer was covered along with the LCD. Let me note that this means it will cost even more than Option 2.

You can simply check what problem you are facing - ask someone to call your phone. In the first and second cases, when you call your iPhone, although it shows a white screen, it will be in a working state. Those. firstly, you will hear this call, and secondly, and most importantly, you can receive this call by swiping your finger at the hypothetical location of the call answer slider - any iPhone owner knows where this very slider is located. If you can’t call and you can’t answer the call, which means the touch function doesn’t work, you’re dealing with option number three and you’ll have to change the digitizer.

How to treat. Option one can be treated simply. You open your iPhone ( detailed instructions you can watch it on YouTube or everything is described in detail), reconnect contact No. 1 and that’s it (I’ll describe the procedure in more detail later) - the phone returns to a working state.

Options two and three - alas, more expensive to treat - say goodbye to your LCD display or digitizer - they will have to be changed. As I already said, in Option No. 2 only the LCD will have to be changed, in Option No. 3 - most likely both digitizer and LCD.

Let's go through the treatment in more detail. I’ll immediately note in bold letters that if your phone is under warranty or there is a normal workshop in your visibility area, I do not recommend you perform this procedure. However, I note that the described procedure for opening iPhone doesn't deprive him warranty service, because it does not break any warranty seals. You will break the seal if you ever decide to gain access to the battery. Access to the LCD and digitizer is free from manufacturer seals.

So, to open the iPhone, you will need: a screwdriver for super-small bolts - figure out the size yourself - the bolts are on that iPhone side, where is the Home button. The second tool is a suction cup, like the one some enthusiasts use to sculpt toys onto car windows. There is another opening option - follow the link above, but I like the option with a suction cup better.

Detailed video Why a suction cup is needed and how to use it is on YouTube. Please note that the suction cup should be placed as close to the Home button as possible.

Next, after you open your iPhone, you will notice several contacts numbered from 1 to 6 (you won't see number 3 because it is under number 2). Pin number 1 should be in the upper right corner. Now it should be obvious to you whether the cause of the white screen was a loose contact. If this is so - carefully, I emphasize - very neat, return the contact to the desired position by inserting it into the slot intended for it.

If this procedure did not return your iPhone, then alas, you are dealing with Option number 2 or 3 and, accordingly, you will have to change the LCD and/or digitizer. And here again, you can either find a normal repair shop, or act at your own peril and risk and change everything yourself.

Estimate how much it should cost self-replacement components, for example, at this address. It is clear that in workshops, if your phone is no longer under warranty, they will charge you twice as much. If you decide to do it yourself, then you only need to carefully disconnect connectors 1, 2 and 3, after which you can replace the LCD and digitizer with one bottle. If you need to replace the LCD or digitizer separately, you will have to unscrew one from the other - this is something like 6 additional bolts. After replacing the components, carefully restore pins 3, 2 and 1 (that is, in reverse order). Now your phone simply must work.

You can again look at details on how to specifically carry out the replacement on YouTube by entering something like iPhone 3G TouchScreen Repair into a search engine. Here's an example:

Or here:

Good luck with your iPhone. Take care of him.

If your iPhone screen is completely white and doesn't show any icons or apps, there's a clear problem. In fact, you are faced with what is already called the “White Screen of Death”. Yes, it sounds scary, but it doesn’t mean that your favorite phone is finished. Below are several solutions that will try to help fix this.

Reasons for the white screen on iPhone

• Software update/jailbreak failed. When trying to update software on iPhone SE, 5, 5s, 6, etc., especially operating system, the update fails and you may see a white screen.
• Hardware problem. Often a white screen may appear due to a faulty cable that connects motherboard And iPhone screen. In some cases, this is simply the result of a hardware failure, while in others, the connector may have become disconnected if the phone was dropped.

"Hard Reset"

The first step in any iPhone troubleshooting process is... in this case you need a slightly stronger restart. " Hard Reset or Hard Reset" is almost the same as a regular restart, which does not require your interaction with the screen.

In order to perform " hard reset»:

1. Press and hold the On/Off button and the Home button at the same time.
2. Continue holding the buttons even after the slider appears on the screen. Eventually the display will darken.

Hold the Home + Sound Up + On/Off buttons

If a hard reset didn't work desired result, there is another button combination that may help:

1. Hold the Home + Sound Up + On/Off buttons simultaneously.
2. This may take a while, but keep holding until the screen goes dark.
3. Continue holding until the Apple logo appears.
4. When the Apple logo appears, release the buttons and let the device start up as usual.

Try DFU mode

If neither of the first two options worked, your next step is to try using DFU mode. This mode used to update or restore firmware. To begin the process, follow the following instructions:

1. Connect your iPhone to your computer.
2. Press both the Home and Power buttons for about 10 seconds
3. Release the On/Off button but continue pressing the Home button for another 5 seconds or so.
4. If the screen goes from white to black, you are in DFU mode. On at the moment, you can use iTunes to restore iPhone from backup copy.

If you have tried all the steps and did not get the desired result, then you have a problem that you cannot fix on your own. We recommend that you contact an Apple service center to troubleshoot the problem.

When a white screen turns on in iPhone 5, iPhone 7, iPhone 5s, iPhone 4, iPhone 4s, iPhone 6, iPhone 6s and others, this happens quite rarely.

iOS is characterized by good stability and performance, but there are situations when these Apple devices show shortcomings - errors and malfunctions.

Among the most famous and serious errors in iPhone 5s, iPhone 6, iPhone 7, iPhone 5, iPhone 6s, iPhone 4s, iPhone x, iPhone 3gs, iPhone 4, iPhone 7 plus, iPhone 3g is the white screen.

It is assumed that this is a BSOD, as in computers running under Windows control — blue screen death.

In addition to the fact that the screen lights up white, it can be black and white, a white small circle will appear, white corners, white dot, two white dots, white squares or a white dot on top.

Now I won’t dwell on all these nuances, but whoever has a need, describe it in the comments, and I will suggest a solution to you.

Reasons for the white screen on iPhone iPhone

There can be many reasons when the screen on an iPhone has become old, but most often this is caused by software errors.

A white screen may appear after iOS updates, jailbreak installation failures or incompatibility iOS versions and devices.

A hardware problem can also be the cause, for example, if the iPhone is dropped on a hard surface.

In most cases, the connection between motherboard and screen. Hardware issues can only be resolved by an Apple Authorized Service Provider.

iPhone frozen with white screen

This is a common problem on devices that have the ability to zoom up to high level(5 times).

In the case where “Zoom” is to blame for the white screen, it is recommended to disable this function: Settings → General → Accessibility → Zoom → OFF.

If this doesn't help, try more cool option, called a "hard reset". This reset does not delete data on the device or affect settings.

How to hard reset white screen on iPhone

IN iPhone models 6 or older, press and hold for a few seconds Power buttons and Home.

On iPhone 7 and Plus, you no longer have a Home button, so press Volume Down and the Power/Sleep button.

On iPhone 8, Plus and X, use a different technology than previous models: Press and quickly release the Volume Up key, immediately followed by the Volume Down key, then press Power until the Apple logo appears.

If you have an old 6s, then there is another key combination for it: press and hold the buttons: Home + Volume Up + Sleep / Power.

Once the Apple logo appears, you can release the buttons. This method will not work on iPhone 8, X and 7 (even if the latter has virtual button"Home").

White screen on iPhone - use recovery

If the above method does not work while the display is white, you can try "recovery mode" and restore data from iOS backup.

Before using "recovery mode", you need to know that the operating system iOS system will be reinstalled.

To do this, you must have the latest version of iTunes installed on your computer and a compatible cable to connect your smartphone to your computer.

Restore iPhone 8 - X: Connect your device to your computer and open iTunes, then press and release the Volume Up button and do the same with Volume Down. Press and hold the Sleep button while in Recovery Mode in iTunes.

Restore iPhone 7: Press and hold the Volume Down and Power On/Off buttons at the same time.

Recover iPhone 6s or older: Press and hold the Home and Sleep/Power buttons at the same time, activate the recovery mode option.

After entering recovery mode, follow the steps to reinstall iOS from a backup.

It is very important not to release the buttons when the Apple logo appears, but to hold them until recovery mode.

White screen on iPhone - use updates via DFU

DFU is a more complex operation than repair and results in complete reinstallation iOS operating system.

Use DFU only if previous operations have failed - as a last resort.

You must have a computer in latest version iTunes and cable iPhone connections to a computer for data transfer. At this point, the operation varies depending on the iPhone model.

iPhone 8 and X: Press and hold the Sleep button for 3 seconds, then press and hold the Volume Down button for 10 seconds.

If the Apple logo appears, release the Sleep button but continue to hold Volume Down for 5 seconds.

If the screen remains black and nothing is displayed on it, it means that the device has entered DFU mode. You are on the right track.

iPhone 7 and Plus: Press and hold the Volume Down and Sleep buttons simultaneously for 10 seconds.

Release the Sleep button, take your finger off the volume and immediately press it for another 5 seconds. If the Apple logo appears, repeat the process. If the screen is black, it means the phone has entered DFU mode.

iPhone 6s or older: Press and hold the Home and Sleep buttons for 10 seconds, then release the Sleep button and hold down Volume for another 5 seconds. A black screen shows the device has entered DFU.

Once you are in DFU mode, follow the instructions from iTunes carefully. The whole process will take a few minutes.

If the above solutions do not help, and the smartphone is locked or does not respond to “Recovery Mode” and “DFU Mode”, then without the help of an authorized Apple services most likely it won't work.

iPhone has a white screen - check the LCD panel

If something serious happens to the LCD panel, then it will have to be replaced, but if it is a minor damage, for example, a contact is disconnected, then you can press it yourself.

Only you will have to remove back cover what's in Apple devices difficult, but if you removed it, then inspect contact No. 1 - if it “came out,” then carefully insert it into place. If the problem was in the LCD panel, then the white screen will stop glowing.

iPhone screen is white - check the digitizer

This is an option when a failure occurs touchpad, but to inspect it you will also need to open the smartphone.

If the digitizer (touchpad) is not working, your screen will not respond to finger touches. If you have enough knowledge, then remove the old one and install a new one.

Note: Replacing the digitizer or LCD panel does not void the warranty due to the absence of factory seals.

The iPhone screen is white - contact a specialist

In case of mechanical damage, you most likely cannot do without visiting service points.

If the iPhone fell and a white screen and a black apple appeared, or vice versa - the apple became white and the screen black (depending on the case), it is almost impossible to identify the fault without diagnostics.

Very often the cable comes off, but the touchscreen and much more can also fail.

If the screen turns white due to a mechanical fault, then it is better to contact Apple service.

If you urgently need a working iPhone, then there are no other solutions other than choosing private specialists - they will do the repair in a short time.