• Instructions for restoring your laptop to factory settings. Acer eRecovery. Full description

    Recovery - what kind of program is this? Translated from English language into Russian "recovery"- This "recovery". Recovery is a program preinstalled by the manufacturer on the laptop’s hard drive or in internal memory smartphone, which allows you to roll back the device (laptop, phone, tablet) to its factory state. On smartphones, this program is launched from the off state by simultaneously pressing and holding the power button and the volume button (usually “up”, but sometimes “down” or both at once) for a few seconds. There is no such uniformity for laptops.

    How to run recovery on laptops

    After turning on the laptop, we begin to feverishly press the keys:
    F3– MSI recovery;
    F4– Samsung. Under the OS you can via Samsung Recovery Solution;
    F8 – Fujitsu Siemens. In general, it often allows you to get into other laptops (through troubleshooting) proprietary utility for Recovery.
    F8- Toshiba recovery;
    F9- ASUS recovery;
    F10 - Sony VAIO. Under OS it is possible through VAIO Recovery Utility;
    F10- Packard Bell;
    F11- HP recovery;
    F11- LG recovery;
    F11- Lenovo recovery.
    Alt+F10 - Acer recovery. Before doing this, select Disk-to-Disk (D2D recovery) in the BIOS;
    Ctrl+F11- Dell Inspiron;
    F8 or F9- Dell XPS.
    Clamp- Rover

    Acer laptops have one wonderful and convenient function for recovery, without using system image disks. The manufacturer of these laptops recorded a system recovery image that occupies only a few gigabytes in a hidden partition of the hard drive.

    In order to restore Windows 8 on laptop, you must turn off your PC and be sure to connect charger.

    When you turn on the laptop, as soon as the Acer logo appears, simultaneously press the Alt + F10 key combination, preferably several times at once.

    When you press these keys, it will start proprietary program for Windows 8 recovery, which is called Acer eRecovery Management. If this utility will not start, check in the BIOS whether the Disk-to-Disk (D2D) function is activated. If eRecovery Management asks for a password, then try entering the standard AIM1R8, 000000 or 00000000. If you have problems logging into the utility, we recommend contacting the service.

    After the utility has loaded, you need to select “ Full recovery"Factory system settings", this option restores the system to its factory state. You should also pay attention to the presence of a recovery function with preservation user files and data. But if you decide to use the second option, after viruses or unstable work- This will not help the system for a long time.

    Now that you have decided on the recovery method, read the warning and click on the “Next” button.

    The backup and restore process will begin. system files. This procedure will take about 15 minutes. Wait for it to finish.

    Then click "OK" button, the system will reboot.

    After rebooting the laptop, the program will start as originally.

    Complete Windows recovery 8 on an Acer laptop completed. The desktop will then launch operating system and a window will appear at the bottom of the screen showing the installation process of the utilities and necessary drivers. Wait for the installation to complete. This will take about 20 minutes.

    If during the installation of drivers and utilities prompts to restart the PC appear, select the “Restart later” option. Preinstalled antivirus program Sometimes you will be prompted to change the registry - agree.

    At the end, the driver and program installation utility will delete all temporary files and reboot your laptop.

    That's it! You have restored Windows 8 OS on your laptop from hidden section hard drive.

    In today's article we will talk about returning Acer, eMachines and Packard Bell laptops to factory settings. Initially, I planned to write separate articles on them, but later decided to make do with one.

    The fact is that eMachines and Packard Bell are the same Acer and the recovery procedure is only slightly different in visual terms, and all the recovery steps for laptops released under these trademarks are almost identical, so I’ll just point out one single nuance along the way .

    So, before you begin the procedure for restoring your Acer, Packard Bell or eMachines laptop to factory condition, please read this article first if you have not read it before, as it describes the preparations that need to be made before you begin restoring your laptop from the system recovery partition. Next steps are described on the basis that you have followed all the recommendations I gave in this article.

    Well, don’t rush to start restoration until you read this article to the end.

    To launch the utility for restoring Acer, Packard Bell and eMachines laptops to factory settings, use the Alt+F10 key combination. You must press this combination when you turn on the computer, before the operating system starts loading.

    To make sure you don't miss this moment, I recommend holding Alt key Make quick, short clicks on the F10 button.

    However, for the recovery utility to run this way, the D2D Recovery option must be enabled in the BIOS settings. The setting you are looking for is here:

    If you have never worked with BIOS settings and have a vague idea of ​​what it is, I strongly recommend that you run the system recovery environment a little longer, but more in a safe way, standard for many mobile computer manufacturers.

    To do this, immediately after turning on the laptop, quickly start clicking the F8 key. This is usually done when they want to select a special boot mode for the operating system. We need the following menu to appear on the screen:

    As you can see, at the very top there is a “Troubleshoot your computer” item. Select it (if for some reason it is not selected by default) and press the Enter key. The files will begin downloading.

    Now you will need to specify the user on whose behalf the recovery will be performed and enter the password for the selected user, if one has been set. Enter the required information and click OK.

    In the next menu that appears, click Recovery Management.

    After this, the recovery utility will launch Packard laptop Bell, Acer or eMachines. As I already said, the differences in their interface are purely cosmetic.

    If you are going to use the recovery option using the Alt+F10 key combination, then all the previous steps are not relevant for you. The process of resuscitating the system from the recovery partition will begin immediately from this step.

    So, since we assume that all our important data has been previously saved, we select the option “Restore operating system to factory settings”.

    We will be warned about the necessary precautions, which you will already be aware of if you have read the introductory article. To continue the procedure for restoring the laptop operating system, click “Next”.

    After this, we will be shown information about the hard drive of our laptop. Just click “Next”.

    We agree with the next warning that all data will be lost.

    After this, the computer will need a little time to complete its preparations...

    ...after which the process of restoring to factory condition will begin. We're just waiting.

    Next, the Acer and Packard Bell laptop will automatically reboot, and eMachines will ask you to click OK to reboot. By the way, I could be wrong, but in my opinion some of the Acer models also ask you to press a button to continue. In general, if you are asked to click OK, click it.

    The laptop will do the rest on its own. The system will reboot periodically. Don't bother her. Just wait for the initial start of the restored operating system.

    This concludes the lesson on restoring Acer, eMachines and Packard Bell laptops to factory condition.

    If my article was useful to you, please recommend it to your friends using the buttons social networks or simply by sharing the link.

    Please write “Free Help” in the subject line of your email.

    Resetting to factory settings on a laptop may be necessary in several cases: if you want to eliminate some system errors, erase unnecessary applications and files or solve the problem when “Windows is locked.” After the rollback, you will receive your laptop the same way you picked it up from the store: without any system errors, viruses, etc. However, problems with hardware will not be eliminated: if the laptop overheated, it will overheat, if it did not pull modern games- it won’t work.
    The recovery process will delete all user data, reinstall Windows, and install all necessary system programs.

    The factory reset process is not too complicated and can even be done inexperienced user, however it differs slightly depending on the laptop manufacturer.

    Note: restoring to factory settings will not work on laptops on which Windows was reinstalled, since during the reinstallation process most “ computer technicians“Due to their dishonesty, they delete files that are necessary for recovery.

    How to restore factory settings on an Asus laptop

    1. Turn off Boot Booster. This is a program that speeds up the process of starting a laptop. To do this, go to BIOS menu by pressing F2 while starting the laptop. You need to find Boot Booster there and disable it by selecting Disabled.
    2. Save the settings that you entered into the BIOS by clicking “Save changes and exit” - the device will reboot.
    3. Now press F9. The system will ask for confirmation to restore factory settings.
    4. After confirmation, the process will end by itself.

    How to restore factory settings on an HP laptop

    1. First, remove all accessories (memory cards, USB drives, etc.) from the laptop.
    2. Now enable System Recovery. This can also be done through Windows, like normal application, and through the F-keys: during startup, press F11.
    3. After turning on the application, select "System Restore".

    How to restore factory settings on an Acer laptop

    1. To restore on Acer, hold down Alt and press F10 repeatedly.
    2. The system will ask for a password. The default password on all Acers is six zeros.
    3. After entering, click "Factory Reset".
    4. Wait until the recovery process is complete.

    How to restore factory settings on a Lenovo laptop

    1. Turn off the laptop and start it again by pressing the arrow button next to it instead of the “Power” button.
    2. Use the arrows to select “ System recovery" and press Enter.
    3. Choose if you need backup and confirm everything that the program offers you.
    4. Wait for the factory reset to complete.

    How to restore factory settings on a Samsung laptop

    1. You need to get into the settings rollback menu. This can be done in two ways: run from Windows application Samsung Recovery Solution or press the F4 key repeatedly when turning on the laptop.
    2. After launching the utility, you must select the “Recovery” item.
    3. Then select "Full recovery".
    4. You must select Computer Initial Status as a recovery point.
    5. Confirm to reboot the system. Wait. After the recovery process is complete and Windows startup You need to restart the laptop again to save the system settings.

    Reset settings on Toshiba

    1. Start the device and hold down the “0” (zero) key on the top keyboard.
    2. Hold down the key and wait for the laptop to turn on.
    3. Release the key when you hear the laptop start making beeping sounds.
    4. Next you need to follow the instructions specifically running program recovery.

    Resetting settings on Sony laptops

    1. After starting the laptop, you need to press F10, enter the manager Windows boot and select "Launch VAIO Recovery Center".
    2. In the window that appears, click “Fully restore the system” and wait until the rollback to factory settings is completed.

    Since OS Windows 8 has firmly entered the lives of users, messages about all kinds of errors in its operation have begun to appear more and more often on computer forums. Some people with a smile attribute everything to the ubiquitous “viruses,” while others never stop making sarcastic remarks about Microsoft. However, this, unfortunately, does not solve the problem. As a result, you work on your Acer laptop and think about how to reinstall Windows 8 on it. Why think about it? There is a way, and it’s quite simple!

    Step No. 1: Launch the recovery program

    Let's say right away that you can reinstall Windows 8 on an Acer laptop without third party programs, disks or bootable flash drives. The manufacturers of such PCs specifically included the Acer eRecovery Management utility in the package of supplied programs. That's what we'll use! But first, turn off our laptop and connect the charger to it. Yes, yes, otherwise we will face a loss of losses, not reinstalling Windows 8.

    After charging has started, turn on our beloved Acer and after the welcome window appears, press repeatedly Alt keyboard and F10 we launch the recovery program we need.

    If suddenly the utility decides not to start (headache and all that), enter the BIOS and activate the Disk-to-Disk function. To do this:

    Step No. 2: We work in the eRecovery program

    When the program loads, a window will most likely appear on your Acer laptop in which you will need to enter a password to log in. That's an ambush, right? But we do not despair and enter the standard values ​​000000, 00000000 or AIM1R8 into the empty field. As a result, a window appears before us in which we need to select a type:

    As you have already noticed, there are two options for the development of events:

    1. Return to original settings on an Acer laptop;
    2. Partial rollback of the operating system.

    Of course, if you wish, you can do last action and rejoice at your good choice. However, such Windows settings 8 won't last long. In a couple of weeks, you will have to think back about how to reinstall the operating system again without harming the work on your Acer laptop. In general, we don’t pull the cat by the tail and select the first parameter to configure:

    After this, the utility will provide all the information on hard drive, with the data on which we will have to say goodbye. We tell them adios and click “Next”:

    As a result, the program will begin to restore files. Note that this process takes a little more than 10 minutes, so you don’t have to go far from your laptop:

    After finishing, press the OK button, and our Acer automatically reboots.

    Step No. 3: Making final settings

    After the laptop reboots, the program will prompt you to make changes to the operating system. This is not difficult to do, since the actions are indistinguishable from those that accompany us during the initial Windows installation 8. In particular, we act like this:

    1. Setting up the language for the PC;
    2. Enter the username and laptop name;
    3. We read " License Agreement» and agree to the conditions described therein;
    4. Selecting the update method for Windows 8;
    5. Set the date, time and time zone.

    As a result of these manipulations, the desktop will be displayed on the screen, and the program will continue further installation of drivers and

    Read more: