• Acer recovery keyboard shortcut. Windows System Restore

    Often, users of computers running Windows 7 encounter performance problems operating system. Problems with your computer usually appear when it slows down a lot and programs won’t open. Also, the computer may not start at all or may do so every once in a while.

    Reasons causing problems in the performance of the operating system can be very different. For example, if a computer gets hit virus, it can damage system files. Also, difficulties with the PC may appear during installation low-quality software, which can damage the structure system files. To solve a problem with the performance of a computer on Windows 7, you need to roll back to the previous one. recovery point.

    To protect the OS, Windows 7 uses restore points that the system periodically creates. Essentially, restore points are previous system state Windows files 7 . To help Windows 7 PC users, we have prepared material that will describe detailed process system recovery in various ways.

    Restoring performance in a busy seven

    If your computer running Windows 7 boots, but the system is not stable, then it’s time to roll back to a previous restore point. First of all, we need to get to the window where we can call up the system recovery options. To do this, open the program “” by pressing the key combinations Win + R, through which we enter the following command: systempropertiesprotection

    A window should open in front of us “ System properties" on the " tab System protection" You can also get to this window in the standard way through the menu “ Start". Further action there will be a button press Recovery….

    After clicking, the System Restore window will open. It will ask you to restore the system using a recommended access point or select another one. We'll stop at recommended restore point.

    This window requires confirmation for the selected recovery. To confirm, click the Finish button.

    This button will bring up a message warning that after the recovery procedure it will be impossible to return to the previous parameters of the seven. By clicking Yes in the message, we will begin the recovery Windows systems 7.

    If the process of returning to the previous state occurred without errors, a corresponding message will be displayed.

    If you are unable to roll back to previous settings using the recommended point, you should select the point that was created later than the selected restore point Windows 7 systems. I would also like to note that to perform this operation you will need special privileges. That is, when you log in, you must select account admin and enter a password for it.

    Restoring the computer's functionality when the OS starts

    If your PC is running seven at all won't load, then you can start the operating system in safe mode. After the BIOS start window appears, press F8 on the keyboard (for laptops there may be another key, for example, Del or one of function keys). This action will cause menu alternative options loading seven.

    In this menu, select the item “ Safe Mode " and continue by pressing Enter, after which the system will start in safe mode.

    If the system successfully started in safe mode, then start restoring the seven, as shown in the previous example. In this mode, to ensure maximum security many functions disabled OS, including GUI Windows Aero. This is what it will look like running program"" with the command " systempropertiesprotection"on a system running in safe mode.

    We return the computer to functionality using an installation disk or bootable USB flash drive

    If the previous two examples do not help you, then you will need to restore seven installation disk or flash drive. For computers that do not have an optical drive, you need to use a bootable USB flash drive with the OS. Bootable USB flash drive can be created using special utilities. The most popular utilities for this purpose are Windows USB/DVD, Download Tool And Rufus.

    Boot from installation disk or via a flash drive. In the installer start window, click Next and proceed to the next window.

    After searching, select the OS you want to restore and click Next.

    In the window that appears, select the same item “ System Restore».

    This action will launch the Seven recovery utility. In the utility, click Next. This action will take you to list of recovery points. Let's choose a suitable point and continue.

    A window will appear in front of you, as in the first example. Therefore, we click the Finish button and respond to the message, after which we will start the recovery.

    After a successful rollback to the previous state, you will receive a message like this.

    Emergency recovery of Windows 7 using antivirus

    If your PC is infected viruses, interfering proper operation computer and the first three examples considered do not help you, then in a good way recovery in this case will be an anti-virus life disk from Dr.Web. With this disc you can clean the system of all types of dangerous software. In addition to cleaning, Dr.Web LiveDisk will be able to cure infected objects, which are necessary to restore Windows 7.

    The Dr.Web LiveDisk image can be used to record to optical disk, and to a flash drive. To use Dr.Web LiveDisk on USB drive, will be needed special program. You can download the program for recording onto a flash drive and the image itself on the official website by going to www.freedrweb.ru/livedisk.

    Let's run the recorded image on disk, setting it to boot first in the BIOS.

    In the bootloader start window, select first item Dr.Web LiveDisk and press Enter. These actions will start loading Dr.Web LiveDisk.

    After downloading Dr.Web LiveDisk, we will get a full-fledged operating system on Linux based. As written earlier, the main purpose of Dr.Web LiveDisk is to clean and treat virus software. Therefore, this OS has a built-in antivirus Dr.Web CureIt!. This antivirus runs with the OS.

    Click on Dr.Web CureIt! button Start scan, which will start scanning, cleaning the system and disinfecting viruses.

    After verification, Dr.Web CureIt! will remove or cure infected objects.

    Since there will no longer be malicious code in the system, you can safely restore the system in the three ways described above.

    If, after checking the system files, you are unable to restore your Windows 7 system, then the only reasonable solution would be to make a complete backup of the information and reinstall the system again.

    How to make a system image in seven

    Another recovery feature in Windows 7 is creating a system image. In this image, you can save all the information on your hard drive, including the operating system. After restoring using this method, you will receive an OS with the same parameters as on the day the image was created.

    Run " Control Panel" and go to the tabs " System and security», «»

    In the window that opens to create an image, indicate the location to save it and click Next.

    In the window that appears, all that remains is to click the Archive button, which will start the image creation process.

    You can restore the created image with Windows 7 and all the information on local disks using the installation disk. The recovery principle is shown in the second example, only when choosing a recovery method you need to select " Restoring a system image" and indicate its location on the saved drive.

    Alternative methods to restore the Windows 7 operating system

    Except standard methods recovery there is alternative software that does the same function. The most interesting solution that allows you to perform system recovery is the program Acronis True Image 2016 . This is a proprietary software package from Acronis.

    First of all, download and launch Acronis True Image 2016 from a shortcut on the Desktop. When launched, the program will ask for a name and password.

    Now let's set it up Acronis True Image 2016 so that he can do backup of the entire disk with Windows 7 OS. This setup should be done immediately after installing the OS, so that during the process using Windows you were able to restore functionality from several backup copies of the system created during a certain period of time. So, let's start setting up. To do this, select the storage type by clicking on the “” link.

    In the window that opens, select the storage “ Acronis Cloud».

    Now let's create a schedule for our backups. To do this, press the button “ Options" and let's move on to the storage settings settings. On the first tab, select the schedule you like for creating backups of our system.

    As you can see, the entire computer is selected as the backup source. Therefore, in the schedule we set, a backup copy of the system will be created in cloud storage " Acronis Cloud».

    For an example of recovery, let's take an archive copy not from cloud storage"Acronis Cloud", and with hard drive. If you have created a backup copy on your computer, then Acronis True Image 2016 will find her himself.

    So we press the button Restore your computer, after which the program will completely restore the system to the state it was in when the backup was created. Also, if you are unable to carry out Windows start 7 on the computer Acronis True Image 2016 there is for this boot image, which can be written to disk.

    You can download this image from your account page. You can obtain a password and login on the official website www.acronis.com. The principle of operation of the bootloader is the same as with the desktop version. Load disc from Acronis True Image 2016 on your computer you can by setting it in the BIOS first when booting.

    From the example it turns out that the utility allows Full control over the creation of PC recovery copies and do backups the entire system in the cloud.

    An example of launching an Acronis True Image 2016 boot disk

    To launch the disk Acronis True Image 2016 When the system starts, you must set the boot mode to optical drive first in BIOS. For example, for maternal MSI boards A58M-E33 these parameters in BIOS mode look like this.

    Another boot method is to use hotkeys to call up the drive boot menu in the BIOS. For example, for motherboard MSI A58M-E33 hotkey is the F11 button. By pressing this button, we will launch a special mode in which, when the system starts, it will open drive boot menu in BIOS.

    Booting from Acronis disk True Image 2016, we will be taken to such a menu.

    In this menu you need to select Acronis True Image 2016, after selection the program will start.

    The example shows that the launch boot disk Acronis True Image 2016 by using desired mode The BIOS is not complicated at all.

    Let's sum it up

    In this article we have discussed almost all the methods and parameters system recovery. We also looked at ways to restore the seven using alternative software and using an antivirus. Which method to choose to restore Windows 7 depending on the situation is up to you.

    To summarize, I would like to note that they mainly disrupt the operation of the OS viruses and experiments with different illegal software. Therefore, so that you do not have to constantly restore the system, use only proven and licensed software, and also use reliable comprehensive anti-virus protection.

    I would also like to note that the examples discussed in the material will work not only on Windows 7, but also on more modern operating systems, such as Windows 8 And 10 . And we, in turn, hope that our material will allow you to properly restore Windows performance 7 and you can confidently say that I can do a system restore.

    Video on the topic

    Greetings, readers.

    Often laptop users encounter a problem when the operating system fails. And if previously the device could be “brought back to life” only with the help Windows reinstallation, now there are several options. The first is to use the built-in solution located on the installation disk. The second is a system recovery for an Asus laptop - the function will reset the equipment to factory settings. Of course, such methods are not only available on the above-mentioned devices. Today I will talk about them and the standard ones.

    On all laptops from Asus A tool is provided that allows you to restore the functionality of the equipment. It is located on the hard drive and takes up about 20-30 GB. In this case, the section is hidden. It cannot be simply removed, but there are tools that allow you to say goodbye to it. But it’s still better not to restore Windows 7 to factory settings.

    It’s immediately worth noting that this solution returns the laptop to the state in which it was purchased in the store. Therefore, all personal data and programs will be deleted from the system disk. If you have it on your desktop or in the folder " My documents"there are important documents, it is better to save them in another place

    This application is convenient because it does not remove previously installed drivers, and therefore there will be no need to waste time on this procedure again.

    It's worth remembering that this decision Perfect if the computer does not see the image on the installation disk.

    Be sure to connect the device to a constant power supply before starting.

    To start restoring from the recovery partition, you need to perform several steps:

    No need to worry again - just leave the laptop for a while. The main thing is to wait for the desktop to appear. Process on various devices lasts from half an hour to one and a half.

    You only need to enter any data when choosing a username.

    After completing the procedure, you can begin to personalize the device, because now it will be the same as you purchased it in the store.

    Windows Disk( )

    Another frequently used tool is System Restore, which is offered on the installation Windows disk 8 or others latest versions. In this case, it is best to do this from a flash drive. The main thing is to prepare the appropriate portable memory in advance. To do this, you need an image of the system, which is at the moment installed on the computer and a special program. Let's say WinToFlash perfect for this. Just insert the device, launch the application and, using the prompts, create the desired element.

    To recover, we perform several movements.

    How to restore the system to Asus laptop

    Restoring the laptop system goes through the process of returning it to its factory settings. As practice shows, the factory settings of a laptop are the most suitable for your specific laptop model Asus. They are created taking into account all the parameters and power of the laptop, so returning to them is a good idea.

    If you have already dealt with similar operations before, then you can handle this one, but if you are not sure, then it is better to contact the best Asus service center, computer specialists.

    Restoring the system will not work if:

    Have you reinstalled Windows at least once? Removed during installation process necessary files to restore the system.

    Do not refer to the fact that your Windows OS was reinstalled by the wizard, because most likely, he could also delete this file we need.

    In this situation, you have no choice but to find or buy a disk with restoring native settings. It can also be downloaded from trusted sources using the Internet.

    We will tell you how to restore your Asus laptop system if you did not reinstall your version of Windows. In order to perform a system recovery via BIOS on an Asus laptop, you need to do some preparatory work.

    Preparing to restore your system

    1. If your computer has important information, then you need to put it on a flash drive. This is especially true for files on drive C.

    You don’t have to delete anything from Disk D, but to protect yourself, delete important files from this disk as well.

    1. Remember that Windows version will also restart.
    2. This procedure will take some time after you turn on your computer for the first time to allow it to install everything. required settings to a laptop.

    ATTENTION!!! You will not solve all laptop problems with a system restore. Make sure you need this operation at all. Consult with a professional before starting recovery.

    This operation is not difficult. You can handle it on your own.

    How to run System Restore on an Asus laptop

    Ready! Now your computer looks like it just came from the store. Happy using.

    Operating system failures occur for various reasons: incorrect installation drivers and applications, computer viruses, hardware problems. Let's figure out how to start restoring the Windows 7 operating system in different ways. These methods are divided into two categories: with and without using the Windows 7 recovery environment.

    Windows 7 Recovery Environment

    Windows Recovery Environment, which translates to “Windows Recovery Environment,” provides the recovery tools we need. Further in the text we will use the abbreviation Windows Recovery Environment - WinRE.

    Let's try to access WinRE tools:


    The absence of an option in the additional boot options menu is a sign that there is no WinRE Windows 7 environment on your system disk. The reason is the removal of a protected hard section disk that is created for WinRE when .

    In this case, select one of the download options:

    Once you have access to WinRE, you can try to restore Windows 7 using environment tools.

    Method #1: Last Known Good Configuration

    The simplest method is based on the fact that the system stores information about the last successful boot of the computer.


    If you cannot return Windows to a working state using method No. 1, move on to method No. 2.

    Method number 2. WinRE: startup recovery

    In this mode, faults that interfere with normal loading OS. To start the mode you need to go to select the option. The following window will appear, in which we click the first item:

    Startup Repair in System Recovery Options automatically fixes problems that prevent Windows from starting

    If problems are found in the boot parameters, you need to confirm the need to make corrections by pressing the button Fix and restart.

    Method No. 3. WinRE: System Restore

    This method allows you to “roll back” the system to the time when it worked normally by selecting one of the restore points. But first these “points” must be created.

    A recovery point is a kind of “snapshot” of the working environment at a certain point in time. The records of this point include only system and software ones. User files(documents, images, music files) are not saved in the records.

    Such points are created automatically by the operating system every 7 days. The user can create this point independently. It is recommended to do this before starting work that you are not sure will be completed successfully: installing an unknown software, drivers. If the job fails, a restore point will allow you to return Windows to initial state.

    Does Windows create restore points?

    In order for Windows to automatically create points, the System Protection function must be enabled for the system disk.


    Create a restore point yourself

    Now, in case of failure Photoshop installations, we can “roll back” the system to this point.

    Performing a rollback


    Method number 4. WinRE: image recovery

    This is a data recovery mode from a backup copy. Let's try to create it.

    Create an archive copy of the system

    1. Go to category Backing up computer data control panels.
    2. Press the system button.

      Creating a system image in the “Backup and Restore” section of the Panel Windows management 7

    3. Choose local disk for storage copies of Windows 7. It is advisable that this is not the disk on which Windows is installed. You can create backup copies on a DVD or on a network resource.
    4. Select the disks that need to be included in the backup copy.

      Setting up archiving allows you to choose what to archive, either at the discretion of the OS or manually. If you specify the manual selection option, you can specify exactly which drives should be archived

    Due to the presence of viruses, driver or software mismatches, the OS may malfunction. If your Windows crashes, don’t rush to panic. The situation can be corrected by returning the state of files and programs to the moment when the PC was working properly.

    While running OS Windows 7, 10 or 8, certain errors and problems may occur. As a result of such failures new launch operating system in operating mode becomes impossible. In this case, it is not at all necessary to do a time-consuming reinstallation of the OS. All you need to do is perform a system restore.

    Recovering the OS using the recovery environment

    When working we use the following scheme of actions:

    1. Reboot the computer, press the F8 key while loading;
    2. Troubleshooting;
    3. System restore, selecting an OS restore point;
    4. Click "Next" and again "Next";
    5. Press the button "Ready", we reboot the system (in the Menu, select boot with the last successful configuration).

    Windows 7 System Restore

    There are several methods you can use to get your OS running again. Some of them rely on rolling back to saved settings. Others simply clear the data.

    You can “reanimate” the OS in one of the following ways:

    • by selecting restore points;
    • using the command line;
    • through safe mode;
    • using a recovery environment;
    • using an image/boot disk.

    Restoring the operating system using system “reanimation” checkpoints is one of the most affordable, effective and popular options. To apply it, you need to make a series of clicks:

    1. Panel "Start";
    2. "System Restore";
    3. "Next";
    4. "Select a restore point";
    5. "Ready".

    With such an operation, problems with the computer will be corrected, changes will be canceled and the system will be returned to the operating state that allowed the PC to boot normally. There is no loss of data, files and documents with this type of recovery. All data is saved. The operation is reversible. You can roll back the system to a previous computer state and use a different restore point.

    Many people wonder how to make a recovery point on their own (manually) in order to choose it in the future? To do this in the same menu "Start" - "System Restore" You can create such a point yourself at any time convenient and suitable for you. It will be saved indicating the current date, which you just have to remember.

    From restore point

    In computer engineering there is such a thing as a recovery point. These are saved PC settings. As a rule, saving occurs automatically with each successful OS boot. Most easy way Windows 7 renewal is to use exactly this data.

    Press F8 when your computer boots. This command will bring up a menu of system startup options. Next, you need to select the Last Known Good Configuration option.

    Another method can be used. Go to the properties of the My Computer folder. Find the System Protection line, clicking on it will open the dialog box of the same name. Click Recovery – Next. We set a target date, indicate the disks that need to be fixed, and confirm the actions. After rebooting, the PC should work normally.

    No restore points

    You can fix problems with the OS even without restore points. To do this you will need to resort to the LiveCD program. You need to download it and burn it to a flash drive with the .iso extension.
    Further all actions will take place in the BIOS. You need to configure booting from a flash drive. For this purpose in Boot section select USB-HDD in the First boot device line.

    Before proceeding directly with the recovery, copy all the necessary files to removable disk. The LiveCD program provides special menu for these purposes.

    We'll fix it system error using an archived copy. Connect the USB flash drive, open the Windows\System32\config\ folder. Files with the names default, sam, security, software, system must be moved to any other folder. In their place, transfer similar files from the RegBack folder and restart the computer.

    The described method will only help if the problem is related to the registry.

    Command line

    You can resort to “reanimating” Windows 7 from the command line if the PC begins to freeze or works slowly, however, the system still boots. Enter the menu "Start" and using the right mouse button, launch the command prompt as administrator. Run the rstrui.exe command, which will open the system restore program. Click "Next". In the next window, select the desired rollback point and click again "Next". Once the process is complete, the PC should work normally.

    There is another way to access the utility. Let's go to "Start". To open the command line, click "Run" and register CMD command. We click on the found CMD.exe file and wait for it to launch. Next we enter in command line rstrui.exe and confirm the action with the Enter key on the keyboard.

    It is not always possible to play it safe and create OS restore points in advance. Problems may arise that block the option of such “reanimation” of the PC. Then you can use another, no less effective and easy option - restoring the Windows system using the system itself.

    We rely on the diagram:

    1. Icon "My computer"- right mouse button "Properties";
    2. "System protection";
    3. In the new window click "System protection", recovery button;
    4. "Next";
    5. Select a restore point according to the date;
    6. Specify the system disks to be restored;
    7. We confirm the operations and reboot the system.

    Restoring Windows 7 using Safe Mode

    This method is preferred if usual loading system is impossible. Then after pressing the PC power button on system unit hold down the F8 key to call "Start Menu". One of the "Menu" options is "Safe Mode". Select it and press Enter on the keyboard. As soon as Windows boots, we carry out the algorithm of actions that we described earlier.

    System recovery Windows 8/8.1

    If you managed to start the OS, you can resume Windows 8 via "Options". Hover over right top corner and enter them. Click on "Change computer settings" – . Chapter "Recovery" will offer several options:

    1. "Regular recovery with information preservation".
    2. “Deleting data and reinstalling the OS”.
    3. "Special option".

    Decide what exactly needs to be done. Next, follow the menu prompts.

    If you choose the latter method, in the window that opens, click on the diagnostics item. You will be offered the following options:

    • "Restore";
    • "Return to original state";
    • "Advanced options". This item includes the ability to roll back to the desired resume point.

    To resume Windows 8.1, press Win+R and call sysdm.cpl. In the system properties window in the tab "Protection" indicate the required system disk. Click "Restore". Clicking "Next", you will be able to see a list of rollback points. Select the one you want and click "Search for affected programs". Changes that have been made to the PC since the selected moment will be deleted. Complete the process by clicking "Ready".

    If you work with Windows 8, problems may occur, incorrect operation Internet, etc. To fix this, you can use the classic recovery method through restore points.

    Another option is a system rollback. To do this, open the menu "Start" - "Control Panel" - "Center Windows updates» . Select an item "Removing updates". The same can be done using the command line.

    So, in the list of updates that opens, we delete those from the moment of installation of which (we look by date) problems and malfunctions began. Delete unnecessary files and do a reboot.

    You can perform a factory reset on Windows 8.1. Important files will not be affected during such an operation. The method is effective, but to implement it, the OS needs to boot without problems. We use the algorithm:

    1. Right side of the monitor - "Options";
    2. "Changing settings";
    3. "Update and Recovery" - "Recovery";
    4. "Recovery without deleting files".

    If you log in in the usual way You can't, you need to use the disk with the system. Load the installation disk, select "System Restore". Press the button "Diagnostics", And "Restore".

    Windows 10 System Restore

    If you are having problems with Windows 10, press Windows + Pause. Go to "System protection" and press "Restore" – "Next". Select required indicator and press again "Next". When finished, click "Ready". The computer will automatically restart and the changes will take effect.

    One of the advantages of the “ten” is the ability to return the settings to factory settings. This helps avoid having to install the system all over again. To reset your data go to "Computer Settings" – "Update and Security" – "Recovery" – "Return the computer to its original state". Click "Begin".

    You can take care of the possibility of a rollback in case of failure in advance. You can create resume points yourself or configure them automatic creation with the desired frequency. To do this, in the settings, in the Update and security item, select Backup service. Specify where to save copies, click Add disk. After selecting the device, the function will be activated.

    You can restore your Windows 10 system again by using restore points. In this case, the system will be rolled back to the moment when it loaded smoothly and worked without failures. This method recovery is described at the beginning of the article.

    If the OS does not boot, a warning table with a key appears on the screen « Additional options recovery". Click it and select "Diagnostics" - "System Restore". Making a choice control point Windows recovery, wait for a system rollback and reboot.

    If such operations do not help and the computer continues to work incorrectly, you can roll back to basic settings. Some programs and utilities, personal settings The PC will be reset and personal data will be deleted.

    This technique is used extremely rarely if the other options described above do not help. The algorithm of actions is as follows:

    1. "Start" - "Selecting parameters"- tab "Updates and Security";
    2. Paragraph "Recovery"- button "Begin";
    3. We choose to delete all files or keep some of them.

    Recovering the system after this will take 40-90 minutes.

    Resuming using the installation disc

    One of the radical methods of fixing the error involves using an installation disk. After launching it in BIOS, click System Restore. In the Troubleshooting section, specify the desired action. Next, follow the system prompts to complete the process.

    Related Posts

    There is ongoing debate about what better than Windows 10 or Windows 7. This phenomenon is not accidental. Microsoft developers claim that nothing is better than Windows 10, but experienced users they say the opposite, they say the system is more reliable than Windows 7 now...

    Computer freezing - quite unpleasant problem. This can happen both at the stage of system startup and in the middle of its operation. Let's figure out why this can happen and what to do about it? Why does my computer freeze...

    Sometimes, when installing programs or applications, a message appears on the computer screen stating that Windows 10 error 5 has occurred. This means that the user is denied access. This happens if there are several accounts in the system...

    Read more: