• Beeline Internet setting up a router connection. Connecting a personal computer to the router's Wi-Fi network

    Most functional WI-FI Beeline router is Smart Box ONE, which is used when connecting home internet and TV. The cost of the device is 2500 rubles. If wired internet no, then you can use the ZTE MF90 4G router.

    Latest models wireless modems Beelines are equipped with a more powerful signal transmitter that operates in two bands - 2.4 and 5 GHz, so you don’t have to worry that some device won’t connect to the Internet. Improved processor maximum level ensures the reliability of the WI-FI signal.

    The device has the following advantages:

    1. The maximum transfer speed is 300 Mbit/s.
    2. The 802.11n standard, which is supported by almost all devices.
    3. Supports digital TV connection.
    4. Convenient interface for configuration.
    5. Modern design.

    The 4G router provides network access at speeds of up to 74 Mbit/s. It comes with a SIM card that allows you to use 30 GB of Internet per month. The monthly fee is 1200 rubles.

    Connection and setup 4G/WI-Router FI

    Connecting the router is quite simple, you need to connect the power cable, as well as the Internet cable that is connected to the room. In order to connect the device to the network, you need to connect the computer to the device using a network cable via a LAN connector. The 4G router connects to the computer via a USB connector.

    1. After all the lights on the device light up, you will need to open a browser on your computer and go to 192.168.1.1. After this, the welcome page of the interface should open.
    2. To gain access to quick setup, you need to enter your login and password. IN standard setting The login and password are “admin”.
    3. After logging in, the main menu will open. If the user is not experienced, then it is recommended to go through the procedure quick setup. If you are well versed in such matters, then you can go to the advanced settings menu.
    4. Quick setup consists of four steps:

    Home Internet. In this section you can connect the device to the Beeline network. All the necessary parameters are already contained in the device firmware.

    WI-FI network. This item allows you to set wireless network access parameters. In this section you must enter the network name and password. The password must be at least 8 characters.

    Guest network. Setup is done here guest access to the Internet.

    TV. IN in this case you need to select the LAN port through which the IPTV set-top box will be integrated, if you have one.

    When the router establishes a connection, the “Status” line will say “Internet connected.” At this stage, the setup is completed and you can fully use the Internet.

    Setting up a 4G router is done in the same way.

    Software update

    The operation of the device is controlled by its firmware, which needs to be updated from time to time in order to prevent malfunctions in its functioning. The firmware should be updated carefully, because if anything goes wrong, service center you can't escape.

    1. The latest software must be downloaded from the official website.
    2. Open the page in the browser 192.168.1.1 .
    3. Login to the menu occurs by entering your login and password (enter admin in both fields).
    4. Next, you need to go to the advanced settings menu and select “Other” at the top of the page.
    5. A list of settings will appear on the left side, where you need to select “Software Update”. At this point you need to select the folder in which the downloaded firmware is located.
    6. Click on the “Update” button and do not touch anything so as not to disturb the settings.
    7. After a short period of time, the router will automatically reboot and be ready for use.

    The 4G router firmware is not updated.

    Connect the cable that our installers installed in your apartment to the WAN port, and connect your computer to any of the LAN ports. You can also connect your PC to the router wirelessly, but at the initial setup stage it is better to use a cable.

    Step 1

    Connect network cable Your computer into any of the 4 LAN ports of the router. The cable that our installers pulled into your apartment must be connected to the “WAN” port.

    Step 2

    Open your browser and enter 192.168.1.1 in the address bar. You will be taken to a welcome page. Click Continue.

    Step 3

    The router will prompt you to enter a username and password. Enter admin in the first field, and admin in the second. Click Continue.

    Step 4

    You will be taken to the main menu of the router. Select Quick Setup.

    Step 5

    • “Home Internet” - in this section you need to enter any number or letter in the “Login” and “Password” fields (the setting does not affect anything).
    • "Wi-Fi network of the router" - here you can configure wireless network your router. In the Network name field, enter the name of your network, for example my_wifi, and in the Password field, enter the password to access it. Please note that the password must contain at least 8 characters.
    • “Guest Wi-Fi network” - here you can configure a guest wireless network for your router.
    • "Beeline" TV - if you have activated the "Beeline" TV service, you need to select the router port to which you will connect the set-top box. If you are browsing broadcast channels on your computer or using the Xbox 360 console, then you don’t need to configure anything.

    To save the settings you entered, click the Save button.

    Step 6

    Be careful when following the instructions in this section. In case of an error in the actions, a visit to the service center will be required to restore the device.

    Step 1

    Download the firmware. Current firmware version - 2.0.38 : (14.7 MB)

    Step 2

    In your browser, open the page at 192.168.1.1

    Step 3

    In the window that opens, enter the username admin and password admin.

    Step 4

    Click the Continue button.

    Step 5

    Click on the "Advanced Settings" button.

    Step 6

    IN top menu select "Others".

    Step 7

    A page with the basic settings of the router will open. In the left menu, select “Software Update”.

    Click the "Select File" button and specify the location of the firmware file that you downloaded earlier.

    Step 8

    After that, click the “Perform update” button

    Step 9

    Wait while the router performs a firmware update, this process takes approximately 5 minutes, after which the router must be rebooted and it will be ready to use.

    Use a hard reset if you need to configure the device again (delete all user settings), there is no access to the web page of the router settings interface, after setting up the router, the Internet connection was not established or the access password was lost.

    Attention! When executing hard reset settings all custom settings will be reset to factory settings!

    There is a recessed RESET (RESTORE) button on the device body, which allows you to reset the settings to factory settings. You can find the RESET, RESTORE button on the same side of the router case where the other connectors and buttons are located. In rare cases, the button may be located on the bottom of the router.

    To reset the router settings to factory settings, follow these steps:
    Turn on the power of the router and wait full load devices. Press the RESET, RESTORE button using a pointed thin object (such as a paper clip) for 30 seconds, then release the button.
    After this, the router will reboot with default settings (factory settings) and will need to be configured again.

    Changing the parameters of the Beeline router is done in its web interface. You can access it after going to the address indicated on a special sticker. For 4G routers it is located under the battery. There is also a password used for authorization.

    The router control panel interface is designed in Metro style. Among its features we can highlight integration with SIM card data. Right in the browser you can view and edit messages and contacts recorded in SIM memory. On home page There is also a section with current connection parameters. On the right top corner the current battery charge level is displayed, Wi-Fi reception and SIM card status.

    Important! Beeline MF90 routers support two connection technologies: 3G and 4G.

    Beeline service management

    To go to the user’s personal account, you will need to receive an SMS with an access password. You can request a message in the appropriate section " Personal account" Parameters are changed on an external site.

    The “Services” section provides the ability to change additional connection properties. In this case, they are used USSD commands, which must be entered into a special text field. View the list available services can be found on the website of the Beeline operator.

    Setting up connection and Wi-Fi

    Go to Settings -> Network. By default, autostart is set: a connection is established every time the Beeline router is turned on. If necessary, this value can be changed, but in this case, to connect you will need to log into the web interface each time. Also in this tab you can select whether a roaming connection is required.

    Pay attention! Tariffing for Internet roaming differs from the cost of use within the Russian Federation.

    To change your wireless network settings, go to the “Wi-Fi” section. Here you can set the name of the network, select the type of encryption and set the password used to connect. The “Access Point Isolation” parameter is responsible for local connection. After turning it on, devices will be able to connect to the Internet, but there will be no possibility of transferring data between them. The “Network name transfer” field is responsible for Wi-Fi visibility. When set to "Disable", Wi-Fi will become hidden. You can limit the number of connected devices in the “Maximum connections” section.

    Important! For maximum protection networks use letters, numbers and special characters in your Wi-Fi password.

    Advanced Wi-Fi settings available in the section " Additional settings" Most 3G/4G routers from this provider support operation in two bands: 2.4 GHz and 5 GHz. But unlike home routers, simultaneous operation of two networks at different frequencies is impossible. It is recommended to select the 5 GHz frequency if all your devices can operate on it. This will allow you to get more high speed data transmission and noise immunity. The remaining values ​​on this page can be left unchanged.

    Today everyone uses cable Internet, including at home. If at your workplace you have everything set up and don’t need to think about the settings, then at home you’ll have to think on your own, especially if you use a switch. To save your time, we will give step-by-step instructions for setting up all types of routers supported by the Beeline operator.

    The options for setting up your router will depend on the model, firmware, and even the city in which you live. The operator himself admits this. First, let's look at what models of routers generally support your provider's connection.

    So, the official website contains a list of equipment that can work in the native network, which is relevant and can work, but requires updating.

    Modern types of routers for the company: Beeline Smart Box Pro, Beeline Smart Box, Zyxel Keenetic Ultra, Beeline Smart Box One. If you open technical specifications branded equipment, then we will see that TP-Link DIR300 and DIR615 are hidden underneath it. Very common models among fixed-line operators.

    Models that can work, but are obsolete: Beeline D-150L, ​​Beeline N-150L, ​​Asus (Asus 520-GU, Asus RT-AC51_U, Asus RT-AC58_U, Asus RT-AC66_U, Asus RT-AC68_U, Asus RT- AC87_U, Asus RT-AC88_U, Asus RT-AC_3200, Asus RT-AC_5300, Asus RT-N11-P, Asus RT-N12, Asus RT-N14_U, Asus RT-N16, Asus RT-N65_U, Asus RT-N66_U), D-LinkDIR-300NRU (revisions B1-B3, B5, B6, C1), Linksys WRT_610n, TP-Link (TP-Link_Archer C2, TP-Link_ArcherС7, TP-Link_ArcherC9, TP-LinkArcherC20, TP-Link ArcherC60, TP-LinkArcherC1200 , TP-LinkArcherC3150, TP-LinkArcherC3200, TP-Link TL-WDR_3500, TP-LinkTL-WDR_3600, TP-LinkTL-WDR_4300, TP-LinkTL-WR_840N, TP-LinkTL-WR_841N/ND, TP-LinkTL-WR_842ND, TP- LinkTL-WR_940N, TP-LinkTL-WR_941N/ND, TL-WR_1042ND, TL-WR_1043 / TL-WR_1043ND, TL-WR_1045 / TL-WR_1045ND), Zyxel (ZyxelKeenetic, ZyxelKeenetic II, ZyxelKeenetic III, ZyxelKeenetic 4G, xelKeenetic 4G II, ZyxelKeenetic 4G III, ZyxelKeenetic Air, ZyxelKeenetic Extra, Zyxel Extra II, Zyxel Giga, Zyxel Giga II, Zyxel Giga III, Zyxel Lite, Zyxel Lite II, Zyxel Lite III, Zyxel Omni, Zyxel Omni II, Start, Start II, Ultra II , Viva) and Wi-Fi router Beeline.

    The communications company made sure that its subscribers did not look for versions to download new firmware and posted these files on its official website with step-by-step instructions and pictures: https://moskva.beeline.ru/customers/pomosh/home/domashnij-internet /nastrojki-s-routerom/beelinesmartboxpro-weblogin/ .

    Models that are physically outdated and require updating are no longer supported:

    • Asus (RTG32IPoE, RTN10, RTN10LX(RNN10E), RTN10U, RTN11, RTN13U, RTN15, RTN15U, RTN53UIPoE, RTN56U, WL500gDeluxe, WL500gPremium);
    • D-Link (DI804HVIPoE, DIR100, DIR300 with a light interface, DIR300 with a dark interface, DIR-615 IP oE, DIR628, DIR632, DIR645, DIR655, DIR815, DIR825, DIR855);
    • Linksys (E1000IPoE, E1200IPoE, E1500, E3200IPoE, E4200IPoE, EA3500IPoE, EA4500IPoE, EA6500IPoE, WRT54GIPoE, WRT120N, WRT160NLIPoE, WRT320NIPoE);
    • Netgear(JWNR_2000IPoE, WNDR_3800, WNDR_4000IPoE, WNDR_4500IPoE, WNR_612IPoE, WNR_1000IPoE, WNR_2200IPoE, WNR_3500LIPoE);
    • TP-Link (TLMR3220IPoE, TLMR3420IPoE, TLR460IPoE, TLR860IPoE, TLWR340GDIPoE, TLWR543GIPoE, TLWR642GIPoE, TLWR741NDIPoE);
    • Trendnet (TEW-452BRPIPoE, TEW-634GRU, TEW-639GRIPoE, TEW-651BRIPoE, TEW-652BRPIPoE, TEW-673GRUIPoE, TEW-691GRIPoE);
    • Upvel, Zyxel (NBG318S-EE, NBG334W-EE, NBG460N-EE).

    It is noteworthy that for absolutely each of the listed models on the website there are instructions, regardless of whether the model still works with the Internet from Beeline or not.

    Connection setup

    1. First, let's pick up the router and examine it. At the location of many connectors we find a port blue(if it's colored), the so-called WAN, if you don't know what it is, then it's signed. You will need to plug in the main cable from the Internet running around the apartment ( twisted pair, crimped at the end).
    2. There we also find a LAN port on the switch. In any of them we install the cable that comes with the equipment. The opposite end of the cable ends in your computer's network card. As a rule, there is only one connector that will suit you, so it is difficult to make a mistake.
    3. Turn on your computer if you haven't already and go to the Start menu. There we go to “Control Panel” - “Network and Internet” - “Network and Sharing Center” - “Manage network connections” - “Change adapter settings” (left).
    4. Next, from several networks that appear, select local connection Right-click to open “Properties”. You need "Internet Protocol Version 4".
    5. In the window, select active checkboxes for two parameters: automatic IP and DNS. Save the settings. In the browser, type your IP address, which is indicated on the Beeline router itself. As a rule, the login, password and address are indicated on the back of the equipment.
    6. Now go to the router menu in the section for connecting to the Internet.
    7. We need the “WAN connection type” column, select “l2tp”, IP and DNS automatically (as on a PC).
    8. In the server we enter the settings from the official Beeline website: TP.INTERNET.BEELINE.RU. The parameters for authorization must be specified in the paper contract. Save the changes and restart your computer.
    9. Now, in the same place in the router menu in the “Wireless Networks” section, enter free values ​​to indicate your Wi-Fi network (SSID), then the network protection method ( WPA-2 Personal), encryption type (AES/TKIP) and key (at least eight characters). Save the changes and test on any device that supports Wi-Fi ( tablet, laptop, smartphone), whether your network is detected.

    What do you need to know before setting up your router? If you previously had a router installed on another computer, or you have also done some manipulations with it, then one of the recommendations would be to reset all current settings. This can be done using the small “Reset” button on the equipment panel. You can’t just press it, you’ll need a paper clip or a needle. This is done specifically to protect against external intrusions.

    The above step by step instructions according to the switch configuration can be modified, some stages can be swapped, the main thing is that the overall goal is achieved.

    Why may the device not work after these manipulations?

    Algorithm for Asus

    1. Connect two cables to the WAN and LAN ports, turn on the router and computer, and pull out the antenna from the router.
    2. Open your usual browser on clean slate and enter the IP in the address bar: 192.168.1.1.
    3. Next, use admin/admin to fill in the free login and password parameters.
    4. In the WAN section, select the connection type l2tp or l2t+dynamic IP.
    5. Enter the authorization parameters assigned specifically to your contract.
    6. Specify the host name and pptp/l2tp as follows: tp.internet.beeline.ru.
    7. Save previous settings and check functionality.

    Algorithm for Asus RT-N12 version

    1. Log in to the wireless network.
    2. Indicate the name of your connection for Beeline in the SSID arbitrarily.
    3. In the authentication line, select “private”
    4. Create a password and save it.

    Algorithm for the TP-Link model

    1. IN address bar enter IP 192.168.1.1.
    2. Login and password are standard: admin/admin.
    3. In the WAN or Internet section, select MTU – 1460 and connection type l2tp, or l2tp Russia.
    4. Enter the registration data according to the details of your contract.
    5. The following is the Beeline server: tp.internet.beeline.ru.
    6. Check the functionality of the connection.

    Algorithm for D-LINK DIR300 router

    1. Fill in the l2tp connection type.
    2. IN empty fields user name/password we enter the data issued specifically for your connection.
    3. Fill in the standard Beeline server: tp.internet.beeline.ru
    4. We remove the “poke” from “Enable RIP” and “without authorization”.
    5. We put a “poke” on the automatic connection.
    6. We find the “Miscellaneous” section and opposite “NAT” and “ Firewall"check the box.
    7. Let's save.

    Problems when working with Wi-Fi equipment

    The most common problem when working with a router is, of course, closed access to the outside global network. If a regular reboot of your model does not help, then check the integrity of the cable and reinstall the plug in all connectors. The most undesirable solution is to reset the settings to wireless device. There is nothing bad about it, but you will have to configure everything again according to the instructions. Also, one of the reasons for non-functioning equipment may be incorrect authorization, that is, an incorrect password or login. If the registration details are correct, then check your balance. In principle, information on negative balance should appear in the browser when you try to connect, but it’s still worth checking again. In the latter case, Internet access will be closed and direct connection (without a router).

    In order to diagnose your connection, you can use the service posted on the Beeline website: https://moskva.beeline.ru/customers/pomosh/home/domashnij-internet/samodiagnostika/.

    Follow all the prompts in order and at the end the reason will be found, then use the “Troubleshooting” section there. If nothing helps, then perhaps you missed an update on the site and your firmware is out of date, or your router is broken. To call a specialist, use a single contact number 0611. If the problem ends up on the operator’s side, then the call will be free, but if the obstacle was on your side, then you will be given a price according to the region for the service call.

    In general, setting up a wireless network and the router itself does not require any special technical knowledge. You just need to carefully follow each step of the attached instructions. It may differ slightly depending on the router model used, but in general the essence will be the same everywhere. After each entered setting, always save your settings and do not forget to restart your computer and router periodically. The last manipulations will significantly save your nerves and time. Don't be afraid to contact the service technical support Beeline, there are specialists working there who face the same problems every day, only they will be able to give you up-to-date information on problems on the network and then, perhaps, the connection issue will not be resolved by you.

    Step 1 of 9
    Connect the cable that our installers installed in your apartment to the WAN port,
    and connect your computer to any of the LAN ports.
    You can also connect your PC to the router wirelessly, but it is better to use a cable at the initial setup stage.

    Step 2 of 9
    Open your internet browser, for example Internet Explorer, Google Chrome, Firefox, Safari or Opera.

    Step 3 of 9
    Enter in the address bar
    192.168.10.1
    (without "www") and press Enter.

    Step 4 of 9
    A window will appear asking you to enter your username and password, enter in both fields
    admin

    Step 5 of 9
    You have arrived at the web interface of the router, let’s start setting up the connection, to do this, in the “Basic settings” section, click on the “WAN” item.

    Step 6 of 9
    Connection type - select L2TP
    IP address/Server name - enter tp.internet.beeline.ru
    Username - enter your login
    Password - enter your password
    Address type - select dynamic
    MTU - enter 1460
    Place a circle on the “get DNS automatically” line. Click the "Save Changes" button.

    Step 7 of 9
    Wait until the router saves the settings, it usually takes 1-2 minutes,
    after which you will see the message “Changing settings was successful”,
    Click OK.
    Wait a few seconds, the router will automatically establish a connection to the Internet.

    Step 8 of 9
    Select menu " Wi-Fi setup", a page will open with basic setup router:
    “Turn off the wireless network” - do not check the box if you want to use Wi-Fi
    "Standard" - select 2.4GHz (B+G)
    "Mode" - make sure "AP" is selected
    “Wireless Network Name” - enter the name of your wireless network, for example My_WiFi
    “Channel number” - set to “Auto”
    Now click the “Save Changes” button.
    Wait a few seconds while the router saves the changes.
    The wireless network is almost ready to use.

    Step 9 of 9
    To protect your wireless network from intruders or unscrupulous neighbors, you need to encrypt it; to do this, in the “Wi-Fi Settings” section, select “Security”.
    The “Settings” page will open Wi-Fi security networks."
    Place the points as shown in the picture:
    Authentication - WPA2 mixed
    WPA encryption - TKIP
    WPA2 encryption - AES
    Preset key format - select "Password"

    “Preset Key” - enter the desired password to access your wireless network, please note that the password must be at least 8 characters in length. Allowed characters include:

    • any Latin characters (a-z, A-Z);
    • any numbers;
    • special characters: ! @ # $ % ^ & * () - _ + = ; : , . / ? \ | ` ~ ( ).
    Click the "Save Changes" button.

    Congratulations, you have fully configured your router's wireless network, now you can forget about wires and be completely mobile user Home Internet.

    In order to connect a set-top box to the router and start watching IPTV, you don’t need to configure anything additional. It is enough that the router has the firmware from our website. Connect the set-top box to any of the LAN ports and you can start watching TV.

    Be careful when following the instructions in this section. In case of an error in the actions, a visit to the service center will be required to restore the device.

    It is recommended to flash the router by connecting the cable from the PC to any of the LAN ports. When flashing a router via Wi-Fi, there is a risk of getting an inoperative device that can only be restored in a service center, or cannot be restored at all.

    Step 1 of 3
    Download the current firmware version (BIN, 1.5 MB).

    Step 2 of 3
    Go to the web interface of the router
    192.168.10.1
    admin
    admin
    and select the "Tools" section.

    Step 3 of 3
    Click on "Firmware Update".
    The “Update Firmware” page will open.
    click the "Browse" button
    select the file with the firmware (for example TEW-432BRP_C_H_W_D1.3RU-V1.2.06-B101101.bin).
    Click the "Update" button.

    Attention!!! While flashing the router, do not remove it from the power supply, wait until the router completely updates its firmware and reboots (3-4 minutes).


    Use a hard reset if you need to configure the device again (delete all user settings), there is no access to the web page of the router settings interface, after setting up the router, the Internet connection was not established or the access password was lost.

    Attention! When performing a hard reset, all user settings will be reset to factory settings!

    There is a recessed RESET (RESTORE) button on the device body, which allows you to reset the settings to factory settings. You can find the RESET, RESTORE button on the same side of the router case where the other connectors and buttons are located. In rare cases, the button may be located on the bottom of the router.

    To reset the router settings to factory settings, follow these steps:
    Turn on the router's power and wait until the device boots up completely. Press the RESET, RESTORE button using a pointed thin object (such as a paper clip) for 30 seconds, then release the button.
    After this, the router will reboot with default settings (factory settings) and will need to be configured again.

    Read more: