How to connect a locked ipad to wifi. What to do if iPad won't connect to Wi-Fi

Modern tablets have firmly entered our lives, opening up many opportunities. They have become so commonplace that the occurrence of any malfunction brings great inconvenience. Expensive branded gadgets require repairs much less often, but no one is immune from such an incident. Users may encounter different problems, including  Wi-Fi does not work on the iPad. Sometimes resetting the network settings on the tablet, which you can do yourself, helps to cope with this. Go to Settings -> General -> Reset -> Reset network settings. There is no need to choose to reset all indicators, otherwise you will lose all your saved logins and passwords.

Causes of network disruption

If rebooting the device, resetting settings and turning off wi-fi router didn’t help, don’t put off visiting the specialist. Long-term use of a broken device complicates and increases the cost of repairs in the future. For example, when parts get wet, Wi-Fi on an iPad often does not turn on. This creates corrosion, which increases over time. After a mechanical shock to the gadget, the microcracks that appear on it gradually expand. If the 3G Internet is disrupted on the iPad 1st and 2nd generation, the reasons for the failure may be the following:

• the program crashed;
• the contacts of the device are dirty;
• moisture has entered the surface of the part.

Reasons why Wi-Fi does not work on iPad

When Wi-Fi doesn't work on iPad 3, it means:

• The router firmware is outdated and needs to be replaced;
• there are problems with the IP address;
• the program has crashed and requires configuration or firmware;
• the WEP encryption algorithm is outdated;
• The screen is not bright enough.

For similar reasons, Wi-Fi does not work on iPad 4, Air 5. These are the most common, but there may be other reasons for failure. Only diagnostics can reveal the exact problem.

7 reasons to choose MacSave service center

There are many companies on the Internet offering gadget repair services. Over the years, we have gained a good reputation and customer loyalty thanks to the following advantages:

• 1. Availability modern technologies, allowing you to make professional diagnostics and determine the exact cause of the breakdown of your iPads.
• 2. Use only high-quality materials and original spare parts for repairs.
• 3. Providing a guarantee for replaced parts.
• 4. Prompt and high-quality service for all iPad models (iPad, iPad 2, 3 iPad, iPad 4, iPad Air 5);
• 5. Highly qualified specialists and extensive experience working with gadgets.
• 6. Friendly service.
• 7. Individual approach to each client.

IN service center for MacSave iPhone repair, you can always count on the opportunity to get advice from our experts on issues related to the operation and maintenance of gadgets. If on your iPad device Wi-Fi does not work or another problem has occurred, contact us!

Wi-Fi does not connect to iPad air~ Nelly ~ 04/03/2016

Wi-Fi won't connect on iPad Air

Macsave Center Answer: Good afternoon, perhaps the problem is in the antennas or transmitter, we need to diagnose

Wi-Fi has become very difficult to see ~ Mikhail ~ 01/07/2016

Good afternoon!!! Dear experts, I have a question for you! Please tell me what could be wrong with my iPad, it can’t see Wi-Fi very well, only next to the router you go to the meter and can’t see it. What should I do?

Macsave Center Answer: Good afternoon, there is a problem with the antenna, the contact may have fallen out, this can also happen if the sensor was not installed properly and was completely cut off.

Wi-fi doesn't work ~ Ekaterina ~ 12/13/2015

Hello! I have an iPad, it doesn't connect to you-fi. Or rather, this function does not work at all, it is impossible to even simply turn on Wi-Fi. What should I do? And will reflashing help?

Good afternoon, the problem may be in the Wi-Fi transmitter, you need to do diagnostics

Almost everything iPad models equipped with a Wi-Fi wireless connection system. This allows you to connect to any network source, be it a home router or any “hot spot” in cafes, restaurants, subways, offices, etc. Connecting to Wi-Fi is easy:

• Go to Settings
• Find the “Wi-Fi” item
• Choose the necessary network and enter the password (if the access point is in a public place, then it is unlikely to be protected by a password; the password for home router You were most likely informed when installing the device)

If everything is in order, then you can log in to the network. To see if Wi-Fi is working, look at top corner. There you will see a Wi-Fi icon. Now you can use the browser.
However, many iPad users encountered such a problem when the device did not want to connect to wireless network Wi-Fi. In the absence of a 3G connection, the inability to access the Internet causes a lot of inconvenience and makes using the device extremely incomplete.

What should you do if your iPad can't connect to Wi-Fi?

First, make sure your device is in the zone Wi-Fi actions. Experiment with the location of your device to improve signal reception. Also check if your Wi-Fi router is working and if there is an Internet connection on other devices (for example, a PC or laptop). Just in case, reboot your router by simply unplugging the outlet. Also check your router software and update it if necessary. There are times when the software on your iPad is outdated, which is also the reason why it does not connect to the wireless network. Therefore, if you have an iPad 2 or iPad Mini with old version iOS, update them.

If everything is fine with network sources, then try switching to “Airplane Mode” on your device, and then switching back to normal mode. If this trick doesn't work, reboot your device.

Didn't work out? Then we move on to more radical means. To begin, click the "i" icon next to your network, and then click "Forget this network." If this method also leads to failure, we use extreme methods - in the device settings, select the “Reset” item, enter the password, if necessary, and select “Reset network settings.”

This option will not only reset all Internet-related settings, but will also delete all saved passwords. That's why this method should be used only in extreme cases.

But another radical method is data recovery from backup copy. Of course, to do this, you need to carefully save your device data in iTunes. Connect your device to your computer and manually update your iPad's software. It is worth noting that in this case, absolutely all data will be erased, and your device will be as if it had just come out of the box.

It also happens that the reason does not lie in the software part, and the tablet does not connect to the network due to a mechanical failure. Think about whether you've dropped your iPad in lately or wasn't he lying for a long time in a damp room. A mechanical shock or moisture getting inside the tablet could lead to a breakdown of the cable connecting the iPad's processor part to the modem board. In this case, the only way out is to have it repaired at specialized service centers.

If your iPad was brought from the USA, then the problem is most likely in the settings of your router, which limits the number of free channels.

The fact is that in Europe, 12 or 13 channels are used to work with a wireless connection, and in the USA - only 11. Thus, if your router distributes on channel 12 or 13, then your iPad simply will not see the network. You can solve this problem as follows:

1. Go to the router settings. To do this, enter in address bar router address. It is unique for each manufacturer. For example, 192.168.1.1 or 192.168.10.1. You can find out the exact address from the instructions for use, which always comes with the device. For example, we will take the D-Link router.
2. Once in the admin panel, go to “Advanced settings”, then to the “Wi-Fi” subsection and from there go to “Basic settings”.
3. Next, change the country from Russian Federation (or Russia, depending on the device) to United States (USA). Save the settings by clicking “Change”. These settings may look different on your router, but the basic principle is the same everywhere. After this, your device should connect to the network without any problems.

Hi all. In this tutorial, I will try to help those of you who are looking for a solution to the problem of unexpected lack of Internet on iPad or iPhone. After all, an iPad without the Internet is a pathetic piece of hardware (this was a joke from a reader who signed up as Evgeniy Vaganich).

I am a proponent of solving all problems using a certain algorithm, so I tried to present the article as a set of steps that you need to take to understand the reasons and take some action. Let's return the Internet to our electronic friend!

Internet does not work via Wi-Fi. What to do?

Step 1. First you need to understand whether the problem is with your iPhone/iPad or not. Connect another device to Wi-Fi (your computer, a friend’s phone, your mother-in-law’s smartphone, etc.).

• If there is no Internet there either, then the problem needs to be looked for in the router. Proceed to the second step.
• If there is Internet on other devices, then proceed to step 3.

Step 2. Go to your router settings. Type the IP of your router into the address bar of your browser (IP is often written on the router itself). Typically this is: 192.168.1.1. Log in using your router login/password (also often written on it). Usually this is: admin/admin.

In the router settings, look for an item with the Internet connection status. Feel free to browse the tabs. It makes no sense to provide screenshots, because there are a great many routers and the settings may look different. There it is often easy to understand whether your connection is working. Another way is to simply look at the lights on the router and read their explanation from the instructions for the device.

If you don’t know anything about routers and don’t want to figure it out, then it’s difficult to help. In general, your task is to see if the Internet works for you. If not, I recommend calling your provider’s technical support and finding out what happened to your Internet.

As a rule, if the Internet on the iPhone and iPad suddenly disappears, this is a temporary problem due to the provider.

Step 3. If there is no Internet exclusively on the iPhone or iPad, but other devices work fine, then I recommend doing the following:

• Check if you have Airplane mode turned off. ( Settings->Airplane mode). It shouldn't be enabled.
• Check if you are connected to a Wi-Fi network. ( Settings->Wi-Fi). If yes, then try resetting the network and connecting it again. Click on the “i” icon opposite the connection. In the new window, select “Forget this network.” After that, we connect to it again (Wi-Fi password, I hope you know?!).
• If it doesn't help, then go to Settings->General->Reset. And there click “Reset network settings”. After that, connect to Wi-Fi again.

Explanation:

As a rule, the above steps are enough to solve the problem of lack of Internet via Wi-Fi on iPad and iPhone. And if you don’t solve it, then at least understand what’s happening and take some action. But there are all sorts of cases when even these steps did not help. Let me give you a couple of examples of problem solving.

My iPad somehow wouldn't connect to the Wi-Fi network. It turned out that he did not support the protocol WEP security(in the router settings where Wi-Fi settings). I changed to the more reliable WPA2-PSK protocol. This happened either on iOS 3 or 4. I don’t know how things are now, but perhaps it makes sense to change the protocol and password for Wi-Fi. You never know - maybe someone has connected to your network and is loading the entire Internet.

Internet does not work via 3G/LTE. What to do?

Here it seems to me that the solution is easier, because the list possible problems not that big. This is due to the fact that most people use standard operators. But for Wi-Fi and routers there is darkness, and there are a lot of firmware for them and their settings are often complicated for the average user.

Step 1: Check your balance. Maybe you simply ran out of money in your account. If the tariff is not unlimited, then check the remaining traffic.

Step 2: Check your settings.

Settings->Airplane mode. Must be turned off.

Settings->Cellular->Cellular data network.

Details about settings various operators For example, it is written here:

/rezhim-modema-na-ipad-ili-iphone.html

Step 3. If the settings are correct and the account balance is positive, then you should remove the SIM card from your phone/tablet and reinsert it. The funniest thing from experience is that most often this is what helps. Why? Don't know…

Step 4: Reboot your device.

Explanation

Other popular Internet problems are:

• absence - complete or partial - of LTE in some places. I changed the operator and personally the problem disappeared.
• lack of LTE, although the phone supports this technology. You can go to the operator’s office and ask to change the SIM card.

Everyone good decision problems!

Naturally, 3G technology is now widespread, and iPad tablets are no exception. However, a connection via Wi-Fi is also necessary if, for example, the 3G card runs out of funds, or on an international trip, where to use mobile internet extremely unprofitable.

1. try to reset the pairing. To do this, you need to follow the path “Settings” -> “General” -> “Network”, after which the iPad moves the user to the menu Wi-fi control– sources. Here you need to select “Forget” this network" and try to connect again;
2. reset current network settings. This method is even simpler - just go to the “Basic” tab in the settings menu and reset the network settings. As a rule, most connection problems are solved in this way, but in this case all saved connection passwords are also lost;
3. change region. The connection problem can be resolved by going to the Wi-Fi wireless network settings and changing the region there from Russia to the USA. Also, instead of automatic location detection, it is better to choose channel 1 - in the future this will contribute to more stable work Wi-Fi connections.

One of these methods solves the problem in 90% of cases. If the above operations failed to restore the connection, it is worth checking the settings of the router and the router.

Possible problems with wireless reception

The reason is incorrect iPad operation with Wi-Fi, many users consider it flawed operating system and software weaknesses. IN to a greater extent this, of course, applies to iOS 7 version. According to many experts, there is no problem with the iPad hardware.

The Apple designers themselves claim that the wireless connection problem can always be solved by resetting the settings, which once again confirms that the essence of the problem lies in the software.

Most experts agree that the main reason why the iPad stopped seeing Wi-Fi, as well as low download speeds, is the energy-saving Broadcom BCM4330 chip, which has been implemented in Apple equipment since IPHONE output 4S.

Wi-fi combined with bright screen drains the iPad battery very quickly, and the Broadcom chip is the best way, according to the company’s engineers, to “extend” the life of the gadget. Apple designers recommend what to do if the iPad 3 does not see wifi router- should be updated immediately software devices, thus freeing up more battery resources for Broadcom.

Video: iPads do not connect to Wi-F network i

Incorrect router configuration

The problem is often not where they are trying to find it. In some cases, the iPad cannot connect to a wireless network because the router is not configured correctly. Owners of Apple products should avoid routers with an Astheros chip - the iPad constantly conflicts with them.

With full confidence that the tablet itself is configured absolutely correctly, you should perform a number of operations with the router:

• Try to update its software by connecting via USB port to the computer.
• In the router settings, change the encryption type to double (WEP to WPA/WPA2).
• Update the IP address being used (the “Renew Lease” tab).
• Increase the brightness level in the router settings.
• Reboot the router.

If you are using a 3G router, and the problem is that the iPad sees Wi-fi, but does not connect, you need to check the status of the SIM card, because it may turn out that it simply ran out of money or it itself has failed and requires replacements.

Checking the router settings and setting up the network

In case of a crisis of ideas and a lack of understanding of what to do if the iPad 2 does not see the Wi-Fi router, you can manual setting network, and also check whether the current router settings are suitable.

It is possible to do this in one of the following ways:

1. check if the operating frequency in the router settings is 802.11n. This frequency is not suitable for operation Apple tablets. If it is selected as active, it must be changed to any other.
2. check that the router does not use ipv6. If this protocol is used, you should try to disable it through the settings.

Apple products are very capricious regarding Wi-Fi and you need to carefully monitor the router settings, the company’s engineers themselves admitted this. However, the problem is being actively discussed, and the company promises to minimize consumer inconvenience in new versions of the software.

Setting up and connecting iPad to Wi fi network

All wireless network settings on iPad are located in the Settings menu. Here you need to select the Wi-Fi sub-item. If everything works correctly, you can see a list of networks available for connection, from which you should select the one you need. A pop-up window then prompts you to enter your Wi-Fi password.

Photo: iPad Sync from iTunes over Wi-Fi

When you click on blue tick you can see basic connection information. If the network does not work, most likely the problem is in the settings of the router itself, but by changing the connection characteristics you can also achieve a result.

True, only the most experienced users can change the IP address and subnet mask.
This is where you can find the “Forget this network” option to reconnect to the source.

Connection problems most often occur with iPad mini. Considering that the model is quite new, many simply do not know what to do if the mini iPad does not see the wifi router. The fact is that the small iPad has a rather fragile structure.

According to statistics, in 70% of cases the mini iPad does not see the network due to mechanical damage caused by the owner. In the event of an impact or severe shock, the WiFi module may partially or completely rupture.

In this case, repairs are required, and, sadly, quite expensive.

In other cases, the reason for refusal iPad connections mini can be:

• Failure of the module piping that occurs due to moisture penetration.
• The antenna is faulty and needs to be replaced.
• Full-scale corrosion, also a consequence of moisture ingress.

Therefore, if none of the methods listed above to connect to WiFi helped, you should take the tablet for a warranty quality check.

Can't see iTunes over Wi-Fi

Problems with communication via Wi-Fi occur not only with gadgets, but also with iTunes. It is not uncommon for iTunes to wireless connection either does not see the connected device at all, or sees it, but quickly loses the signal, depriving the user of the opportunity to synchronize.

Solve this problem for the operating room Windows systems A simple restart of the program can help, performed as follows:

It is also important to ensure that you do not delete the process completely, because in this case you will definitely no longer be able to connect to iTunes.

If this does not help, you can try other options:

1. check if the tablet and iTunes are actually connected to the same network or if something happened automatic connection to another source.
2. turn off data transfer cellular networks, leaving only the WiFi connection active.
3. configure synchronization manually by following the path “Settings” - “General” - “Synchronization via WiFi”.

So, there are a great many options and reasons why an iPad may refuse to work with WiFi, but instead of immediately paying a large sum for repairs, it is better to first check all the settings of both the tablet and the router. In most cases, simply rebooting the device is enough to restore the wireless network.

We all know that Apple devices always work very cool and stable. Yes, you can't argue with that. There are indeed cases when some problems arise on the iPhone or iPad. Today we will look at a very popular problem when the iPhone or iPad stops seeing the Wi-Fi network from your router. Yes, there is a problem, and now we will try to solve it.

Have you connected your phone or tablet to Wi-Fi networks, we used it, everything worked, and then at some point you see that, for example, the iPad is disconnected from Wi-Fi. Go to settings, but your wireless network is not there. It turns out that the iPad stopped seeing Wi-Fi. The exact same situation can happen with an iPhone; it can also stop seeing your Wi-Fi network. The most interesting thing is that other devices: phones, tablets, laptops, etc. continue to connect to the wireless network and work perfectly. And what’s also interesting is that the same iPhone sees other Wi-Fi networks (if there are any), but does not see your home network. Or it doesn’t see any wireless networks at all. Many people immediately take their devices for repair, etc. There is no need to rush, now we will try to figure it out.

It doesn’t matter what version of iPhone you have: 4, 5, 6, 7, 8, or even iPhone X. Likewise with a tablet, problems are observed both on a regular iPad and on iPad mini. WITH iOS versions same story. They write that the problem appears on those devices that were brought from America. By the way, I read that on iOS 8 devices often do not see Wi-Fi, or simply lose the connection. And one more important point, we will look at the problem when the Wi-Fi network does not appear in the list available networks on a tablet or phone. There are simply many cases when the same iPhone does not connect to the wireless network. I wrote about the solution to this problem in the article:.

iPhone or iPad does not see the Wi-Fi network from the home router: possible solutions

You might still find it useful.

I wrote about what a channel is and about changing the channel on different routers: Tp-Link, Asus, D-Link, Tenda and Zyxel in the article: Everything is written there in great detail and shown in the screenshots. I think that there should be no problems with changing the channel. As for changing the region, as a rule, it changes on the same page as the channel in the settings of your router.

Here, for example, changing the channel and region on Tp-Link:

You can try setting the region to United States. And channel, 1st, or 6th. If there is no result, you can try different options. Don't forget to save your settings and reboot your router.

I think that after these iPhone actions, or the iPad will see your Wi-Fi and connect to it without any problems.

Confirm the reset and wait for the device to reboot.

In the event that the device does not see at all not a single network (and other devices see), and you have already tried everything, then in most cases it is due to some hardware problem. Therefore, you need to contact the service center.

If nothing helps, then describe your problem in the comments, and we’ll figure it out together. Also read the comments, there are a lot there useful information on this topic.