How to remove unnecessary channels. Questions about the tricolor

Both old and new customers periodically face the fact that there are too many TV channels on the menu. Some may be duplicated after a software update, others are already outdated and do not work, and some may simply not be needed or interesting to household members. And then clients have a question, how can they delete or change channels on Tricolor TV equipment? After all, it’s much more convenient to remove completely empty programs and rearrange the list so that your favorite TV channels are always visible.

What to do for existing clients

Satellite broadcast packages include many different channels, but not all of them are needed by users. This is especially true for outdated and poorly transmitted on modern equipment, as well as commercial programs. Users who have not yet managed to replace the receiver with a new one can delete it without special problems. You just need to use the remote control from the transmitter.

1. Go to “Menu”, “Settings” and click on “Arrange favorites” or “Organize channels”.
2. Delete the entire favorite list containing unnecessary TV channels by pressing the red button on the remote control.
3. If you use yellow, the list items will be arranged alphabetically. Select an unnecessary channel from the list and click “OK” to delete it.
4. Don't forget to save your changes before exiting.

For some receivers code required to delete or sort transmissions, it is simple - 0000. This method is not suitable for all types of equipment, mainly only for DRE 5000-7000, GS 8300 (M, N) and GS 8302, 8304. If your receiver belongs to one of these four models, you won’t have problems removing unnecessary channels. As for everyone else, it is possible with them only blocking.

Solving a problem for new clients

On modern devices everything is a little more complicated; you won’t be able to delete channels on them. New users also often ask the question “How to remove unnecessary programs?”, However, on new receivers you can only block them. And for this you will also need code 0000. A blocked TV channel will remain in general list as extra ballast, but it will not interfere with the main broadcast. If you place it at the end of the menu, you can even forget that you have unnecessary TV channels.

To understand how to block unnecessary broadcasting, you need to take the remote control from the receiver and perform several steps:

Also, with new and old equipment, you can swap items, rename TV channels and create lists by genre to immediately find the desired program. Now the satellite television company is actively updating the software, so soon, no matter how much you would like to delete unnecessary channels on Tricolor, this option will no longer be available.

Creating a favorite list on receivers
brands: GS E501/GS C591; GS U510; GS U210

New receivers from Tricolor TV have created standard lists of TV channels. They cannot be edited or deleted, however, to customize your own list, you can create a separate favorite list with a list of channels that you use.

Creating a favorite list of TV shows on PGS E501/GS C591 receivers; GS U510; GS U210 is carried out using the menu - “Channel Editor”, where you can organize the list of channels at your discretion.

And so we begin to create a favorite list.
1. On the control panel (RC), press the “MENU” button and in the pop-up window at the bottom of the TV screen using the “RIGHT” - “LEFT” buttons, select the “APPLICATIONS” menu item and confirm the selection with the “OK” button.

2. In the new menu window that opens, use the arrows “RIGHT” - “LEFT”, “UP” - “DOWN” on the control panel to find the submenu “CHANNEL EDITOR” and press the “OK” button, after which a window will open in which we will directly create a favorite list .

3. On the left side of the window we create our list of channels. To create a new list, you need to press the green F2 button PU, after which it will open onscreen keyboard, where we enter the name of the new list, for example “MY CHANNELS”. Save the name of the favorite list with the blue button F4 PU.

4. Move the cursor to the list we created and press the F2 button; a list of all TV programs available on your receiver will appear on the right side of the window. Select from the list the TV channel that you want to save in your favorite list and press the “OK” button on the control panel. Press the green F2 button again and select the next channel. We repeat this operation the required number of times.

5. Move channels up and down using the red F1 button. Place the cursor on the channel that needs to be moved and press the F1 button (the selected channel will be indicated special character), use the arrows “UP” - “DOWN” PU to move the channel to the desired position and click “OK”.
You can delete an unnecessary channel using the yellow F3 button.
6. After we have created the favorite list, exit the “CHANNEL EDITOR” application by pressing the “EXIT” button several times.
7. Press the blue F4 button and in the pop-up window (on the left side of the screen) we find the list we created, in our case “MY CHANNELS”, confirm the selection with the “OK” button.

This completes the creation of the favorites list. On receivers of the GS E501/GS C591 brands; GS U510; With GS U210, you can create up to fifteen favorite lists with different names and organize the channels as you wish.

Read also:
How to create a favorite list on brand receivers -

Using satellite television is very convenient, but from time to time, both old and new customers have problems. A large number of channels appear on the screen that need to be deleted. But few people know how to remove unnecessary channels.

Why unnecessary channels appear:

There can be many reasons. But when they appear, it becomes very difficult and inconvenient to use such television.

• one of the reasons for the appearance of extra TV channels is the reinstallation of software;
• It also happens that a channel used to work, but then it was transferred to a new broadcast range and therefore it no longer works. Then you need to remove it so that it simply does not bother you;
• channels have been installed that are of no interest to anyone, so why would they interfere if it is easier to block them.

So it’s much easier to install programs in such a way as to immediately get to the channel that is needed. And then just enjoy watching. Most often, clients refuse unnecessary ranges for the reason that they are outdated or poorly reproduced on new equipment. If you are a satellite TV user with old equipment, then it is much easier to abandon unnecessary channels.

So, let's learn how to remove unnecessary channels on satellite Tricolor TV. Let's look at the step-by-step instructions. How to remove? All you need is the remote control for your TV, so:

• Select “Menu” on the remote control, then go to settings. Then you need to select “Arrange favorites”;
• using the red button on the remote control you can delete the entire list of channels that you no longer need;
• no deletion code required. You can organize all channels using the yellow button;
• The final step is conservation. If this is not done, then all efforts are in vain.

New users

How to resolve the issue of deleting channels for new users on Tricolor? On devices that are considered next-generation hardware, things are much more complicated. Here you can only use blocking. The block is also installed when using 0000. In this case, the program will remain, but it will not interfere with watching programs. As an option to resolve the issue, you can move it to the end of the list and then it will not come to your attention at all. To refuse, you also only need a remote control; you don’t need to do anything on the receiver.

Phased shutdown:

• select the “Menu” item on the control panel;
• go to the “Installation” program;
• then enter 0000;
• the next stage is “organization of channels”;
• use the arrows to select unnecessary information on the screen and after selecting, press EXIT, and then save.

The same steps can be taken if you decide to change the name of the broadcast.

At the moment the company is replacing all software. Therefore, in the near future, the possibility of changing something will generally remain a thing of the past. So try it now while you still have the opportunity.

If there is a need to unlock or return the channel, then do the same using 0000 to unlock the receiver. Read also.

G S B211 TV channel editor, watching TV.

Many people ask us - how to change the list of TV channels on the GS B211 receiver? And today we have prepared material on this topic. Everything is very simple here, but you need to understand that you need to spend a little of your time on this. Anyone who is not satisfied with the order of the list of TV channels that the operator Tricolor TV offers from the stream may find this useful.

G S B211 TV channel editor, go to the receiver menu.

In order to do everything, we need to go to the receiver menu and find the corresponding function, to do this we press a few buttons and enter. For convenience, an arrow shows where you need to go.

G S B211 TV channel editor app

G S B211 TV channel editor, list of folders in the receiver's memory.

As you can see that on the left side of the screen there are folder names, in each of them, when you hover over them, there are TV channels and these TV channels appear on the right side. These lists are sent and generated by the Tricolor TV operator in his control room and the receiver already receives them in finished form. Therefore, it is possible that many people do not like it.

G S B211 TV channel editor blocking mode.

Of course, you can try to go into this list and try to change something, but you won’t succeed, because the developers have blocked all the possibilities, leaving only the ability to block a TV channel, this is a function in order to watch this TV channel you will need to enter code. It is clearly visible on the screen that there seems to be a list, but it is not active.

G S B211 TV channel editor, create a new folder.

In this case, you need to do things a little differently, create your own folder and name it something that would be clear to you. To do this, use the on-screen keyboard to enter the name, selecting characters in Latin or Cyrillic, or using numbers.

G S B211 TV channel editor, selection of TV channels for your list.

The name has been entered, you have new folder, now you need to add TV channels to this folder, to do this, leaf through the list of those offered and mark all the TV channels that are interesting to you; don’t look at their order now, you don’t need to pay attention to this fact at this stage.

G S B211 TV channel editor, editing your list.

After you have selected TV channels, they appear in your folder and now you can move everything around, there are two ways to do this - either select a function using additional colored buttons on the remote control, a hint on the TV screen, or using the on-screen menu.

G S B211 TV channel editor, functions that are available in the editor.

Here, just like in the lists that the operator offers, only all actions are workable and not blocked, for example, select the delete function and delete all TV channels that are not interesting to you, want to change places, select edit and drag TV channels from one place to another.

It is worth noting that what more list, the more the receiver “thinks” or is “stupid” or “there is a delay”, then you can’t do anything, this is a problem with the receiver and you can only wait until perhaps this processing speed is corrected.

And in conclusion, you can watch a video in which everything will be shown. Experiment with lists, now we hope everything works out for you.

The “main menu” of the satellite receiver is called up by pressing the “MENU” key. To select a main menu item, use the up/down and left/right keys, to confirm the choice - the "OK" button, to exit the "Main Menu" - the "EXIT" key or the second "MENU" key. The “Main Menu” and all its internal items are full screen. Internal menu items include:

Menu title.
- Panel function keys Tricolor receiver, including 4 colored keys displayed on the TV screen in the same order as on the GS HD 9305 receiver remote control. If the key is active, it has an inscription. The inscription under the key informs about the action performed when this key is pressed. If a key is inactive, it does not have a signature.
- Menu sections. To select a menu section, use the up/down buttons, to confirm the selection - the "OK" button, to cancel or go to a higher level - the "EXIT" button.

HD 9305 menu items may look like this:
1. Keys for moving to the next level of the satellite receiver menu.
2. Input fields. To enter, use the “NUMBER buttons 0-9”.
3. Drop-down lists. To open the list, press the “OK” key; to move through the list, use the up/down buttons; to confirm a selection, use the “OK” key; to cancel, use the “EXIT” key; in addition, you can select a list item using the left/right keys.
The drop-down list can also be an input field. To access certain functionality of the Tricolor TV HD receiver, you may need a PIN code (you will be required to enter a code on the TV screen). For more details, see the “Blocking” section.

To be able to add to the HD receiver’s memory or update the list of found Tricolor TV channels and radio stations, use the specialized function “Search for Tricolor TV channels.” The main advantage of such channel scanning is that there is no need to know the frequencies, polarization, and other technical characteristics of the broadcast of television and radio channels. To search for television channels and radio stations of the Tricolor operator, in the “Main Menu” select the item “Search for Tricolor TV channels” and press the “OK” key. When prompted to confirm scanning of channels and radio stations, select “Yes” and click “OK”. The “Select Region” menu will appear on the screen of the television receiver (see “Setup Wizard”, step 5). Specify the region using the left/right keys or the drop-down list, then to save the specified region, move the cursor to the “OK” button and press "OK" key on the receiver remote control. After that, scanning of TV and radio channels will begin.

If the region data was specified in the “Settings Wizard”, then after confirming the request to scan TV and radio channels of tricolor TV, selecting your region is not necessary.

After scanning, you will be asked to save the found TV and radio channels. To save the scan results, select “Yes” using the left/right keys. TV and radio channels scanned before that time will be displayed in the list of TV and radio channels in white, and new channels found within of this search- in blue.

The color highlighting of new TV and radio channels disappears the first time you switch to these channels, also after there is no power supply and the receiver is further connected to the electrical network.

Search, organize and edit Tricolor channels.

In this menu item, the subscriber will be able to search for TV and radio channels, in automatic or manual modes; the menu items “Organize channels” and “Arrange favorites” are also available.

Automatic search.

In the GS 9305 HD menu section “Automatic search”, you can search for TV and radio channels in automatic mode. This requires:
1. Indicate the number of the satellite dish or set parameters for a new one: press the key blue, the “Antenna Settings” window will open, in this window you need to enter the settings of the new satellite dish(see section “Antenna setup”)
2. Indicate the name of the satellite from which the channels are broadcast
3. Specify encoding

Encoding type
Specify “Any” - leave unchanged.
Specify “FTA” - leave unchanged.
Select “DRE+FTA” if you want to store TV and radio channels in the receiver’s memory open access and tele or closed with “DRE” coding

Select “Quick search” or “Full search” in the menu.
Quick search - the satellite receiver searches for channels using the list of transponders located in the permanent memory of the satellite receiver. Full search- the search is carried out according to the list of transponders located in the memory of the tricolor TV HD receiver, and the frequencies of the transponders that are broadcast in the stream.

Manual channel search mode.

In the menu section "Manual search" it is possible to set detailed settings(transponder frequency and polarization) to scan tricolor TV channels with arbitrary indicators. For this case you need:
1. Indicate the number of the satellite antenna or set the parameters for an additional one by pressing the blue button, after which the “Antenna Settings” window will open, in this window you need to specify the settings of the new satellite antenna
2. Indicate the name of the satellite
3. Specify from the drop-down list, or set manually using buttons 0-9, the transponder frequency in xxxxx format. To confirm specified parameters you must press the "OK" key
4. Specify from the drop-down list or enter manually using the numeric keys the flow rate in xxxxx format. To save manually entered data, be sure to click the “OK” button
5. Specify the polarization of the transponder (vertical, horizontal, left, right, auto)
6. Specify the encoding type. If the transponder exists and the information is correct, the signal strength and quality scales at the bottom of the screen will turn green
7. Select “Search” or “Network Search” in the menu
Search- the receiver scans according to the parameters specified by the user.
.
Network search - this feature is executed if the source transponder contains information about the frequency of another transponder in the digital stream. Scanning will continue on another transponder. During scanning, a progress bar and 2 lists of detected television and radio channels are displayed on the screen of the television receiver. If found television channel is already present in the general list, it will not be added again. After this, a request will appear on the TV screen to save the found TV and radio channels, confirming their number.
.
When you press the “EXIT” key while scanning television channels, the search will end; in the meantime, it is possible to store in memory those television and radio channels of tricolor TV that the receiver has already been able to find.

Organization of channels

The “Channel Organization” menu includes categories of TV programs based on specific properties:
TV/Radio - includes two lists of television and radio channels: TV and Radio;
Operator - includes a list of operators of scanned TV and radio channels;
Satellite - includes a list of satellites from which television and radio channels, tricolor TV and radio stations were detected;
Transponder - includes a list of transponders from which channels were found.
To select a group, move the cursor to the group name using the keys to go to the list of group elements, press the “OK” key. Using the keys, select the desired list item and press the “OK” key, after which a window will appear on the TV screen with a list of television channels in the original group. On the right side of the channel list there is a field with the parameters of the selected television channel: satellite, operator, frequency, polarization, flow rate (SR), error correction parameter (FEC), encoding.

On the right side of the radio channel name there is a special icon. Scrambled, that is, paid channels are marked with the “$” symbol. After Tricolor TV channels are decoded, this icon will not disappear. There is also a way to edit TV and radio channels.

EDITING TV and radio channels - in order to select a TV channel or radio station, press the “OK” key. The highlighted channel or radio station is highlighted with a tick. To cancel the selection, press the “OK” key again. To mark a group of TV and radio channels, use the “OK” key. To invert the selection for group operations, press the green key. To move through the list, use the up/down keys.

DELETE channels - select the channel or several channels that you intend to delete. Press the RED key. A message will appear on the TV screen. To confirm the channel deletion operation, move the cursor to “Yes” and press the “OK” key. If you want to cancel the deletion, move the cursor to "No" and press the "OK" key or press the "EXIT" key.

LOCK - Select the channel or group of channels you want to lock. This feature will be useful if you are viewing the Tricolor TV “Night” package and want to block these channels from children. Press the YELLOW button. A special lock symbol - a padlock - will appear next to the channel number. To unblock a channel, you must enter a PIN code. If you want to remove channel blocking, you must select the blocked channel and press the “YELLOW key”. After this, the special blocking sign will disappear next to the channel number.

The menu item “Arrange favorites” makes it possible to create favorite lists, add channels to lists according to specific characteristics (filter), select, delete, rename, rearrange and sort in alphabetical order. By default, the favorite lists “Music”, “News”, “Sports”, “movies”, “New 1”, ..., “New 26” are entered. The largest number of favorite lists is thirty. To rename the list, press the blue key.

In order to delete all TV and radio channels from the favorite list, select the desired list, press the red key and confirm the deletion. To add channels to the list, select the desired list and press the OK key. The window that opens on the left side of the screen displays the contents of the favorite list, and on the right side of the screen the channels from which you can create a favorite list are displayed. Use the left/right keys to move the index to the list of all TV and/or radio channels. Using the up/down keys, select the desired TV channel or radio station and press the “OK” key, after which the selected TV channel or radio station will move to the favorite list on the left side of the window.

To move all TV and/or radio channels to your favorites list, press the blue key. To simplify the selection of programs, you can use sorting programs alphabetically (“YELLOW key”) or filter (“RED key”).

Using the filter, you can mark programs by specific characteristics: satellite, transponder, operator, type (TV, Radio), type of encoding (FTA, Coded, DRE, etc.). To filter channels by any property, press the red key; to reset filtering parameters, press the green key. To exit the filter, press the yellow key or the “EXIT” key. To move a specified channel through the favorite list, use the arrow keys to select the desired channel and press the green key. An arrow sign will appear instead of the channel number.

Move the channel to a new position. Press the green key a second time to save the channel in the new position; to return the channel to its original position, press the EXIT button. To remove a channel from the favorite list, select the channel you want to remove and press the OK key. To remove all channels from the list, press the blue key.

To access most of the receiver's functions, you must know your PIN code (you will be prompted to enter a code on the screen). The default standard PIN is 0000 (four zeros). Settings (language settings, A/V output settings, antenna, satellite, screen, time, lock, factory settings)

Satellite dish settings

The “Antenna Setup” menu screen is available in the “Settings” section by pressing the “OK” button or in the “Automatic” and “Manual Search” menu by pressing the “BLUE button” on the selected antenna. On this screen, you can assign special settings for switches, local oscillator frequencies, etc. to the antenna number.

At the starting point, the user must select the number of an existing satellite dish or specify the settings of a new one.
Any parabolic antenna connected to the receiver (via a disk switch) must have own number in this menu item. Using the “RED key” of the receiver’s remote control, you can completely delete the parameters of the satellite dish, together with the channels belonging to it. To add a new antenna in the “Antenna” item, you need to press the “YELLOW button”, then set the settings for the new satellite dish. SATELLITE CONVERTER (LNB) SETUP
To configure the satellite converter, set its type: “Universal 1”, “Universal 2”, “9750”, “10600”, “10750”, “Custom”. If your antenna is tuned to Tricolor TV or NTV-plus, in this case you must indicate the type of converter “10750”. If the antenna is tuned to any of the European satellites such as: Sirius, Hotbird, Astra, etc. - you must specify “Universal 1”.

If you specified the LNB type “Universal. 1", then switching between local oscillator frequencies 9750 and 10600 MHz is carried out automatically, when you specify the transponder frequency value in the search menu for tricolor TV channels and radio stations. Setting the 22 kHz tone is optional (disabled). If you have set the LNB type to “Universal. 2", then switching between local oscillator frequencies 9750 and 10750 MHz also occurs in automatic mode. Setting the 22 kHz tone is optional (disabled). In the case of LNB “9750”, “10600” or “10750”, the corresponding value of the lower operating frequency of the local oscillator is selected. If the required frequency is not in the list, press the “BLUE key” and add the frequency manually using the “Number buttons”. If you have selected the “Custom” LNB type, the values ​​of the lower and upper operating frequencies of the local oscillator can be set independently. For this purpose, press the “BLUE key” and specify the frequencies manually using the “NUMBER buttons 0-9”.

POWER SUPPLY TO SATELLITE CONVERTER (LNB)

Possible values ​​for this section: “Disabled”, “Enabled”, “Increased”. When you select the Off option, no power is supplied to the LNB IN connector. When selecting the “Enabled” option, the standard value of the satellite converter supply voltage is supplied to the LNB IN connector. When selecting the “Increased” option, the converter supply voltage increased by 1V is supplied to the LNB IN connector. Increased LNB supply voltage is used in rare cases of non-standard installations, mainly when the cable is too long.

TONE
The value in this field is set to 22 kHz and is used to switch the converter local oscillators. DISEQC 1.0

DISEQC 1.1 INPUT
If you have installed several satellite converters or antennas connected to the receiver using a DiSEqC switch, then you need to select the appropriate parameter Switch A-D or ToneBurst A/B or C+ToneBurst A/V.
DiSEqC 2.0 switches support control via the DiSEqC 1.0 protocol. When using DiSEqC 1.1 and DiSEqC 2.0 switches, you can connect up to 1 b satellite antennas to the GS HD 9305 satellite receiver. MOTORIZED SYSTEM

To work with a motorized antenna system, in this paragraph you must indicate its control type. If you are using a motorized system with a stationary control type, in this menu section set the value to “Stationary”, and in the next menu item indicate “Satellite Name”. If you are using a motorized system with support for the DiSEqC1.3 control program, in this menu section specify the value USALS input. If you are using a motorized system to control an antenna drive with the DiSEqC™1.2 protocol, then in this menu item set the DiSEqC 1.2 input value. At set value USALS input or DiSEqC 1.2 input must be configured for USALS or DiSEqC 1.2 in the appropriate section. Pressing the “OK” button with the cursor positioned on this section will open a window in which USALS or DiSEqC 1.2 is configured.

DISEQC 1.2 SETUP

The “Position” field is available in the DiSEqC 1.2 setup menu. A field for selecting one of the existing positions or creating a new one by pressing the “YELLOW key” on the receiver remote control. You can delete a position using the “RED button”. To change the position number, use the “BLUE button”: a window will appear on the TV screen for entering the number from the remote control of the satellite receiver using the “NUMBER buttons 0-9”. To confirm your entry, click “OK”.

The selected position is saved in the positioner memory by pressing the “Green key”, this command accessible from all DiSEqC 1.2 setup menu items. SATELLITE NAME

Field for selecting a satellite corresponding to the set position. You can cancel the selection of a satellite for a set position using the “RED key”. To change the parameters of the selected satellite, press the BLUE key.

TRANSPONDER

The transponder selection field, scale of strength and signal quality of this transponder will be displayed at the bottom of the screen, and the “Satellite Settings” menu will open.

GO
When you press this button, the satellite dish is moved to the selected position.
SEARCHING FOR SATELLITE SIGNAL

This function is used to search for a signal from a satellite. After selecting the direction (East or West), the antenna will automatically start moving in the selected direction. The level of the received signal is controlled by the strength and quality scales at the bottom of the screen. To stop the antenna movement, press the RED button. To fine-tune the antenna position, use the commands “Step to the West” - “YELLOW button” and “Step to the East” - “BLUE button”.

SEARCH FOR CHANNELS
Performing a search for TV channels and radio stations using the selected transponder.
ADDITIONALLY
Opens the menu for additional positioner settings. The antenna can be moved to the starting position by selecting “Go to position 0”. To set the eastern (western) limit of the antenna movement, you must set the antenna to the extreme eastern (western) position, then select “Set eastern limit” (“Set western limit”). To disable limits, select “Cancel limits”. The purpose of the “Recalculate” command is individual for each positioner.

The menu item “Setting up satellites” is available in the “Settings” section by pressing the “OK” key or in the “Automatic search” and “Manual search” menu by pressing the “BLUE key” on the selected satellite. The “Satellite Settings” menu allows you to specify the required satellite from the list, set a new one, delete it, change both the name of the satellite and information about its orbital position. In addition, in this menu you can change transponder settings or specify new transponders. SATELLITE NAME

The names of the satellites are listed in alphabetical order. First, the list contains names in the Latin alphabet, then in other languages. If the required satellite is not in the list, press the yellow key. A “New” satellite will be added to the list of satellites. To change its name, press the blue key. Using the on-screen keyboard, add the desired name. In a similar way, you can change the name of each satellite.

In order to enter the required orbital position, you need to press the blue key, use the “NUMBER keys 0-9” to enter the required satellite position in the format xxxx.x, select the direction “W” (western longitude) or “E” (eastern longitude) and press "OK" key.

This item contains a list of transponders of the specified satellite. Any transponder has the following settings: “Frequency”, “Polarization”, “Flow rate”, “FEC”.

Enter the transponder frequency in xxxxx format. The frequency should be in the range of 3400-4200 MHz or 10700-12750 MHz. To enter the frequency 10719 MHz, dial 10719, to enter the frequency 3675 MHz, dial 03675.

Using the “NUMBER buttons 0-9” indicate the required flow rate in xxxxx format. To set the flow rate, for example, 2500, dial 02500. To set the orbital position 125.6, dial 1256. To enter the orbital position 19.2, dial 0192

Screen settings in the GS HD 9305 receiver

In “Screen Settings” the user is supposed to configure the following options: “Menu transparency”, “Infobanner type”, “Display time”, “Power on mode”.
MENU TRANSPARENCY
This menu item specifies the degree of transparency of the image of the informative banner, the TV and radio channel list window, the time indicator, etc. The parameter value varies from 0 to 70% in 10% increments.
INFO BANNER TYPE
“Beginner” mode disables the ability to view data about the satellite, settings and program channel identifiers in the extended information banner. The “Expert” mode opens up the ability to view information about the satellite, settings and program channel identifiers in an expanded information banner.
DISPLAY TIME
This section specifies the display time of the information banner. The duration time can be changed using the number keys from 0 to 30 seconds. If you select value 0, the information banner will not appear when switching TV and radio channels.
ON MODE
“Standby mode”: after turning on the tricolor TV receiver to the network and moving the receiver’s power switch to the “I” position, the receiver remains in standby mode. To turn on the receiver, you need to put it into operating mode using the “STANDBY” key. “Operating mode”: after connecting to the network and turning the power switch of the HD receiver to the “I” position, the receiver enters the operating state.

Set age limit and PIN code to restrict access to selected channels. This option defines viewing restrictions and prevents unauthorized access to certain sections of the menu of your receiver using a PIN code consisting of 4 digits and different from the default PIN code (0000). When the PIN code is entered incorrectly, you do not have the opportunity to switch to the next mode.

In this menu you can set an age limit for viewing various programs. The age limit is set using a drop-down list, which is called up by clicking the “OK” button. This function works if the operator satellite television transmits information about age limit to watch his programs.

In this menu item you can restore all settings to their default values. When resetting to factory settings, all information about configured TV channels and radio stations, antennas, and favorite lists will be lost. To load factory settings, select “Yes” and press the “OK” key.

Conditional access (Tricolor TV smart card, Tricolor TV HD module)

The 9305-HD receiver has a built-in DRE Crypt access module and allows you to access programs broadcast using the DRE Crypt conditional access system.

The “Status” window is called up in the “Main Menu” by selecting the “Status” section. In addition, the “Status” menu item window can be called up by pressing the “STATUS” key in the TV and radio channel viewing mode. The “Status” item stores the following information: satellite receiver model, DRE ID, receiver software version, module software version, serial number hd receiver. To obtain additional information (hardware version of the receiver, module, database version, platform ID, bootloader build date), press the green key. To close the window with additional information, press the green key again.

For information about subscriptions, press the red key. In the window that opens you can get general information about the geocode, subscriptions available on the map, mail subscriptions and their validity period. To exit the “Subscriptions” window, press the red key again.

Subscribe to news

On July 31, 2017, changes were made in broadcasting aimed at dividing regional TV channels into appropriate lists and designed to make viewing these TV channels more convenient.

To correctly display the list of TV channels, follow these steps:

1. Press the “Menu” button and select “Settings”.

2. Select Factory Reset and click OK.

3. Confirm resetting the receiver to factory settings by first pressing the red “F1” or “Info” button on the remote control, and then selecting the “Yes” option.

5. Select the receiver menu language and audio channel languages, then click the “Next” button.

6. Select audio and video settings and click Next.

7. Set the time settings and proceed to the next step of the Setup Wizard by clicking the “Next” button.

8. Select the operator “Tricolor TV” and click the “Next” button.

9. Select the region that suits you. There will be 3 regions available for selection - “Main”, “Moscow +0 hours.” and “Moscow +2 hours.”

Attention! You must select one of two regions - “Moscow +0 hours.” or “Moscow +2 hours.” - depending on the region of your residence. In the first case, all TV channels will be broadcast according to Moscow time, in the second, some TV channels will be broadcast with a time shift of +2 hours from Moscow time.

When you select the “Main” region, one information channel will be saved in the channel list.

10. Wait until the search for TV channels is completed and save the found TV channels.

On July 20, 2017, changes were made in broadcasting aimed at dividing regional TV channels into appropriate lists and designed to make viewing these TV channels more convenient.

This page contains instructions for all receiver models (see below on the page).

Instructions for setting up the Tricolor channel list for receivers GS E501, GS E502, GS C591, GS C5911, GS U510

4. Select the Tricolor TV operator and, if necessary, the antenna settings you need (if standard connection It is recommended to leave the default settings for the receiver to the antenna). After that, click the “Continue” button.

5. Select the region that suits you. There will be 3 regions available for selection - “Main”, “Moscow +0 hours.” and “Moscow +2 hours.”

6. Wait until the search for TV channels is completed and save the found TV channels.

Instructions for setting up the channel list for receivers GS U210, GS U210 CI, GS B210, GS B211, GS B212, GS E212, GS A230

To correctly display the list of TV channels, follow these steps:

1. Press the “Menu” button on the remote control and select “Applications”.

2. Select “Setup Wizard”.

3. Set the time, time zone and language of the receiver menu, then click the “Search” button.

4. Select the Tricolor TV operator and, if necessary, the antenna settings you need (for a standard connection of the receiver to the antenna, it is recommended to leave the default settings). After that, click the “Continue” button.

Attention! You must select one of two regions - “Moscow +0 hours.” or “Moscow +2 hours.”- depending on the region of your residence. In the first case, all TV channels will be broadcast according to Moscow time, in the second, some TV channels will be broadcast with a time shift of +2 hours from Moscow time.

When you select the “Main” region, one information channel will be saved in the channel list.

Instructions for setting up the channel list for receivers GS B520, GS B521, GS B521L, GS B522, GS B531M, GS B532M, GS B533M, GS C592

To correctly display the list of TV channels, follow these steps:

1. Press the “Menu” button on the remote control and select “Applications”.

2. Select “Setup Wizard”.

3. Set the time, time zone and language of the receiver menu, then click the “Search” button.

4. Select the Tricolor TV operator and, if necessary, the antenna settings you need (for a standard connection of the receiver to the antenna, it is recommended to leave the default settings). After that, click the “Continue” button.

5. Select the region that suits you. There will be 3 regions available for selection - “Main”, “Moscow +0 hours.” and “Moscow +2 hours.”

Attention! You must select one of two regions - “Moscow +0 hours.” or “Moscow +2 hours.”- depending on the region of your residence. In the first case, all TV channels will be broadcast according to Moscow time, in the second, some TV channels will be broadcast with a time shift of +2 hours from Moscow time.

When you select the “Main” region, one information channel will be saved in the channel list.

6. Wait until the search for TV channels is completed and save the found TV channels.

Instructions for setting up the channel list for HD 9303, HD 9305 receivers.

To correctly display the list of TV channels, follow these steps:

1. Press the “Menu” button and select “Search for Tricolor TV channels”.

2. On the region selection screen, select the region that suits you. There will be 3 regions available for selection - “Main”, “Moscow +0 hours.” and “Moscow +2 hours.”

Attention! You must select one of two regions - “Moscow +0 hours.” or “Moscow +2 hours.”- depending on the region of your residence. In the first case, all TV channels will be broadcast according to Moscow time, in the second, some TV channels will be broadcast with a time shift of +2 hours from Moscow time.

When you select the “Main” region, one information channel will be saved in the channel list.

3. Wait until the search for TV channels is completed and save the found TV channels.

Instructions for setting up the channel list for receivers GS 6301, GS 8305, GS 8306, GS 8307, GS 8308, DRS 8308.

To correctly display the list of TV channels, follow these steps:

1. Press the “Menu” button on the remote control and select “Applications”.

2. Select “Setup Wizard”.

3. Set the receiver menu language, then press the “Forward” button.
4. Set the time and time zone, then click "Search".

5. Select the Tricolor TV operator and, if necessary, the antenna settings you need (for a standard connection of the receiver to the antenna, it is recommended to leave the default settings). After that, click the “Continue” button.

6. Select the region that suits you. There will be 3 regions available for selection - “Main”, “Moscow +0 hours.” and “Moscow +2 hours.”

Attention! You must select one of two regions - “Moscow +0 hours.” or “Moscow +2 hours.”- depending on the region of your residence. In the first case, all TV channels will be broadcast according to Moscow time, in the second, some TV channels will be broadcast with a time shift of +2 hours from Moscow time.

When you select the “Main” region, one information channel will be saved in the channel list.

7. Wait until the search for TV channels is completed and save the found TV channels.

Instructions for setting up channels for TVs with a CI+ module.

To correctly display the list of TV channels, follow these steps:

1.Put your TV into setup mode satellite channels. To do this, you need to go to the signal source (antenna) settings section in the menu of your TV.

2.In the settings section, select " Manual setting" and go to it.

3.Before starting the channel search, make sure that the following manual search parameters are set:

The Network search option is enabled.
Frequency (transponder) - 12226 (H/L)
Symbol rate(Symbol rate) - 27500
Satellite - Eutelsat 36E

If necessary, enter these parameters manually.

4. Start searching for channels and follow the instructions on your TV screen. During the search process, the TV should display information about the search progress and the channels found.

5. When the process is complete, confirm saving the channel list (the request may not appear on some TV models).

Creating a favorite list on receivers
brands: GS E501/GS C591; GS U510; GS U210

New receivers from Tricolor TV have created standard lists of TV channels. They cannot be edited or deleted, however, to customize your own list, you can create a separate favorite list with a list of channels that you use.

Creating a favorite list of TV shows on PGS E501/GS C591 receivers; GS U510; GS U210 is carried out using the menu - “Channel Editor”, where you can organize the list of channels at your discretion.

And so we begin to create a favorite list.
1. On the control panel (RC), press the “MENU” button and in the pop-up window at the bottom of the TV screen using the “RIGHT” - “LEFT” buttons, select the “APPLICATIONS” menu item and confirm the selection with the “OK” button.

2. In the new menu window that opens, use the arrows “RIGHT” - “LEFT”, “UP” - “DOWN” on the control panel to find the submenu “CHANNEL EDITOR” and press the “OK” button, after which a window will open in which we will directly create a favorite list .

3. On the left side of the window we create our list of channels. To create a new list, you need to press the green F2 PU button, after which the on-screen keyboard will open, where you enter the name of the new list, for example “MY CHANNELS”. Save the name of the favorite list with the blue button F4 PU.

4. Move the cursor to the list we created and press the F2 button; a list of all TV programs available on your receiver will appear on the right side of the window. Select from the list the TV channel that you want to save in your favorite list and press the “OK” button on the control panel. Press the green F2 button again and select the next channel. We repeat this operation required number of times.

5. Move channels up and down using the red F1 button. Place the cursor on the channel that needs to be moved and press the F1 button (the selected channel will be indicated by a special symbol), use the UP - DOWN arrows to move the channel to the desired position and press OK.
You can delete an unnecessary channel using the yellow F3 button.
6. After we have created the favorite list, exit the “CHANNEL EDITOR” application by pressing the “EXIT” button several times.
7. Press the blue F4 button and in the pop-up window (on the left side of the screen) we find the list we created, in our case “MY CHANNELS”, confirm the selection with the “OK” button.

This completes the creation of the favorites list. On receivers of the GS E501/GS C591 brands; GS U510; With GS U210, you can create up to fifteen favorite lists with different names and organize the channels as you wish.

Read also:
How to create a favorite list on brand receivers -