The boot menu does not open on a Lenovo laptop. Hotkeys to enter the BIOS menu, Boot Menu, restore from a hidden partition

Do you want to know how to enter a special bootable BOOT menu, computer or laptop?

To boot from a flash drive or CD - DVD disc A?

In this article you will learn how to do it correctly.

When we do clean Windows installation, then we need to boot not from the hard drive but from another medium.

This is either a CD - DVD disc or a flash drive.

Typically, this is done by entering Computer BIOS or laptop.

This is exactly what we did in previous lessons.

We went into the BIOS and changed the boot order of the devices.

It is at this step that approximately 90% of users who want to reinstall Windows stop.

They cannot enter the BIOS and make the necessary settings there.

Exists alternative way select boot device.

This BOOT menu. BOOT menu easier to enter in the BIOS and more convenient than it.

The essence of the BOOTH menu is to press a certain key when booting a computer or laptop.

A menu like this appears:

In this menu we can select any device and immediately boot from it.

Let's look at this in more detail.

I connected a bootable USB flash drive to the laptop. On my laptop, it is responsible for entering the Boot menu Esc key ape.

I clicked on Esc button ape, hold it down and, at the same time, turn on the laptop with the button. The Boot menu opened in front of me.

Cursor keys, up down, I select required device. IN in this case this is a flash drive.

Once the desired device is selected, press the Enter key.

Ready! I booted from the flash drive and now I can start installing Windows.

So, to enter the BOOT menu, you need to press one key when you boot your computer or laptop.

As with the BIOS, the BOOT menu keys differ depending on the manufacturer and brand of your laptop or computer.

The most common keys are:

F12, Esc, F11, F9 and F8

Boot menu has significant benefits before BIOS.

1. Boot menu is simpler and faster to use.

2. You don't need to understand complex BIOS settings and change them. Let me remind you that there are settings in the BIOS that, if you change them, your computer or laptop will stop booting completely. Using the Boot menu you will avoid this.

3. There is no need to return the BIOS settings back to their original state.

Of course, the Boot menu also has its own characteristics.

If you have Windows 10 or Windows 8.1, then to enter the BOOT menu, I recommend using restarting the computer instead of shutting down. The fact is that in these operating systems, the so-called Quick Start is activated by default.

Fast startup makes sure that when you shut down the computer does not turn off, in the usual sense of the word. He falls asleep, or rather enters hibernation.

So when you enable it, it will not give you the option to enter the Boot menu. It will simply wake up and show you the state it was in when you clicked the shutdown button.

The solution is very simple: use a reboot instead of shutting down.

Let's see how it's done:

So, my laptop is turned on, Windows is loaded, the bootable flash drive is connected. Now I enable reboot.

I just click on the Start button, click the Shut down button and click Restart.

Once the BOOT menu is in front of us, we can start installing Windows.

Quick startup can be disabled completely. And then you can use the Boot menu as usual when you turn on the computer.

The setup is very simple, I will now show you how it is done. Quick Start is disabled via the classic Control Panel. On Windows you can open it via search. Just enter the word “panel” into the search. As soon as the Control Panel icon appears in the search results, I simply press the Enter key.

In Control Panel, you can switch from categories to icons. Or you can simply search for Power Supply.

On the left we have Power Supplies. Click on it.

Here we need an Action button power buttons. Click on it. To unlock settings that are not active, you need to click as shown in the picture. Changing parameters that are currently unavailable.

Now we can disable Quick Launch ( Fast loading), just uncheck the box. Then we save the changes.

After this, the Boot menu will be available to you upon boot.

In Windows 8.1, the setup is done in a similar way.

One more feature.

In some sophisticated BIOS and not so sophisticated ones, there is a menu item that disables the BOOT menu.

More details about this in the video.

If your BIOS has such an item, then you will have to go into the BIOS and enable the BOOT menu once. That is, activate this item.

After this, the BOOT menu will be available to you upon boot.

From the table, you can find out which keys you need to press on your PC or laptop to enter the BOOT menu.

Sometimes there is a need to call the boot menu when starting the computer. This is necessary in cases where you need to boot the PC from any media (CD, flash drive, internal or external hard disk, etc.), for example, for installation or reinstallation operating system. In this manual, you will learn how to access the Boot Menu from a desktop computer or laptop.

I would like to note right away that old computers with antediluvian motherboards do not have a Boot Menu. In this case, in order to boot from any other device, you need to go into the computer’s BIOS (usually the Del or F2 key is responsible for this, rarely F1) and set the desired boot order of devices in Boot section.

This is done differently on different motherboards, but the name of such a section will necessarily contain the word Boot.

How to enter the Boot Menu on Windows 8 and 10 systems

How to enter the Boot Menu on a Lenovo laptop

How to get to the boot menu on an Acer laptop

How to enter the Boot Menu on an Asus laptop

If you own a laptop from another manufacturer, then see the table below, which shows popular laptop brands with keys for calling both the Boot Menu and BIOS.

detailed video:

Do you want to boot your computer from a flash drive or disk? To do this, it is not necessary to go into the BIOS settings. Especially if you don’t understand much about it. After all, there is an easier way. In this case, just enter the Boot Menu and change the device boot priority. This is done in about 10 seconds. And most importantly, there is no shamanism in the BIOS.

What do users usually do to reinstall Windows? As a rule, they record a licensed digital copy on, and then execute.

Boot Menu (or boot menu) is extremely useful option BIOS. With its help, you can quickly set the boot priority of devices. Simply put, launching the Boot Menu opens a small window in which you can immediately put the flash drive (or DVD) in first place, and hard drive- on the second. In this case, you do not need to enter the BIOS.

In addition, changing settings in the Boot Menu does not affect BIOS settings. That is, this option works once - for one activation. And when you restart your PC, Windows will boot from hard drive(as usual). If you need to run again Windows installation from a flash drive - call the Boot Menu again.

If you remember, when changing the settings in the BIOS, you had to go into it again and change the device boot priority back (i.e., put the hard drive in first place). But in the case of the Booth Menu, you don’t need to do this.

How to call Boot Menu

It's very simple - just click booting Windows one key. Which one exactly? It depends on:

• BIOS version;
• motherboard;
• laptop models.

That is, the situation is exactly the same as with the BIOS. For example, in order to, you need to press the Del or F2 button, and to open the Boot Menu you need to click another one.

Most often this is Esc or F12. Although, as mentioned above, the call button may differ on different PCs.

Therefore, below we will look at how to launch the Boot Menu on popular brands of laptops and personal computers.

How to enable Boot Menu on Lenovo laptops

Owners of Lenovo laptops should not have any difficulties. After all, the Boot Menu on Lenovo is launched very simply - by pressing the F12 key when loading Windows.

Plus, on the body of many models there is a special button with a curved arrow. You can press it if you want to select additional. download options.

Launch Boot Menu on PC with mat. Asus board couldn't be easier

You need to press the F8 key when it boots (at the same time that you would normally enter the BIOS).

And there is a little confusion with Asus laptops. It seems that the manufacturer is the same, but there are several buttons to launch the Boot Menu. After all, the Boot Menu on Asus laptops is launched using one of two keys:

Most often this is the Esc button, although it can also be F8. However, there are only 2 keys.

The boot menu on Acer opens by pressing the F12 button

But there is one small nuance here. The fact is that the Boot Menu is usually disabled on Acer laptops. And when you press F12, nothing will happen. To make it work, you need to do the following:

1. Go to the BIOS (when booting the laptop, press the F2 button).
2. Go to the “Main” tab.
3. Look for the line “F12 Boot Menu” and change the value “Disabled” to “Enabled”.
4. Save the changed settings and exit the BIOS.

The system will reboot and you can go to the boot menu on Acer laptop using F12.

How to enable Boot Menu on Samsung laptops

On Samsung you need to press the Esc key. But owners of Samsung laptops need to know one feature. The fact is that to call the Boot Menu you need to click the Esc button once! If you click twice, the window will simply close.

Therefore, you will have to get used to it in order to know exactly when to press the Esc key. Although there is nothing complicated here - just a couple of attempts.

HP also has its own specifics

Launching the Boot Menu on HP also has its own specifics. After all, opening the Boot Menu is done a little differently.

1. At turning on Windows Immediately press the Esc key.
2. The launch menu will be displayed - press the F9 button.
3. Ready.

After this, the boot menu of the HP laptop will open, and you can set the priority for turning on devices (using the arrows).

Boot menu on Windows 10 or 8

If Windows 8 or Windows 10 is installed on your PC or laptop, then you most likely will not be able to enable the Boot Menu.

The fact is that these OSs have a small peculiarity - by default they have “Quick Start” enabled, so they are not completely turned off. This is called hibernation (something like sleep mode). Therefore, when you boot your PC or laptop, you will not be able to open this menu on Windows 10.

There are three ways to fix this:

1. Hold Shift when turning off your laptop or PC. After this, it will turn off normally (in the usual sense of the word). And then you can launch it on Windows 10 by pressing the desired key.
2. Instead of turning off your PC, you can restart it. And at the moment of turning on, just press a specific key corresponding to your laptop brand or motherboard.
3. Disable the Quick Start feature. To do this:

That’s it – now you can easily access the Boot Menu on Windows 10 or Windows 8.

For your convenience, below is a screenshot showing the keys to launch the Boot Menu for popular laptops and PCs

For example, for computers running on a mat. MSI board– this is the F11 button. And launching the Boot Menu on laptops Sony VAIO carried out using F12. In general, you can figure it out for yourself - the table is simple and understandable.

Also, for convenience, buttons for entering the BIOS are written. If for some reason you are unable to open the Boot Menu, you can always change the device boot priority in a standard way- via BIOS.

When installing an operating system, you need to go to the Boot Menu to tell your computer which device to boot from. This is also necessary when you need to run from a Live CD or bootable flash drive. Today I will tell and show you how to enter Boot Menu both on PC motherboards and laptops.

Just like you need to press a special key (F2 or Del) to enter the BIOS or UEFI, there is also a specific button to bring up the boot menu. As a rule, these are the F11, F12 or Esc keys, but there are exceptions. Usually, when you turn on the computer, under the splash screen you can see a key that is responsible for calling the Boot Menu.

You can, of course, do without the Boot Menu by simply selecting a certain order for loading devices in the BIOS, but if you want to boot one-time (checking for viruses or installing a system), then I would advise using the boot menu, because it is much faster.

So, why do you need the Boot Menu at all - you ask. This menu shows a list of devices connected to the PC from which you can boot (flash drives, CDs, hard drives) for further installation of the system or for testing components.

Logging into the Boot Menu in Windows 8 and Windows 10

Go to "Power Supplies"

On the left, click on "Power button actions"

Disable the “Enable fast startup” item (you can do this even if not on a laptop).

Logging into the Boot Menu on Asus laptops and motherboards

Regarding laptops, it's a little confusing. The Esc key opens the boot menu on modern models, on older laptops the F8 key works and mainly on models whose names begin with the letter k or x. In short, if the Esc key does not bring up the Boot Menu, then we reboot and try pressing F8.

Logging into the Boot Menu on Lenovo laptops

Logging into the Boot Menu on Acer laptops

Below in the table you can see all other laptops and the key to call the Boot Menu and BIOS:

I hope the information in this manual was useful to you. If you have any difficulties getting into the boot menu, then write in the comments, I will try to help!

Probably everyone knows that in order to boot from a disk drive or flash drive you need to set the order of devices to boot in the BIOS. For example, in order to start, you need to boot from this very disk. To do this, you need to set the disk drive as the first boot device in the BIOS.

However, you don’t have to go into the BIOS and change nothing there. Just press the key immediately after turning on the computer call boot menu (boot menu) and in the list of devices that appears, select the one from which to boot. Selecting a boot device in the boot menu has no effect on BIOS settings. That is, this menu affects specifically a specific boot, and if you do not call it afterwards, the computer or laptop will boot as configured in the BIOS.

How to call the boot menu - keys for calling the BIOS boot menu

So, we figured out what the boot menu is in BIOS. Now I’ll tell you what hotkeys you use to call it. There is no standard here. It all depends on the manufacturer of the PC or laptop motherboard and on the version of the BIOS installed there. So, for example, calling the boot menu asus differs from how to call the boot menu on an acer or sony vaio laptop.

In most cases, the key to call up the boot device selection menu is F12 , but some manufacturers use their own key combinations. Particular attention can be paid to the boot menu Samsung and HP. To get to the boot menu of a Samsung laptop you need to press Esc (only once!). If you click on Esc at least twice, the boot menu will close before it can open. Therefore, you need to calculate and clearly hit the time by pressing hotkey calling boot menu. This can be quite difficult to do without some skill.

Calling the boot menu on HP laptops is also specific. To do this, you first need to press Esc , after which it will appear service menu laptop. In it we already select the desired item (by pressing the hot key). To call the HP boot menu, press F9 .

For some manufacturers, the device to be loaded into the menu is selected using the cursor keys; for others, you need to press a key with a number indicating serial number devices in the list.

Below is a table that is easy to understand. This is a table of correspondence between hotkeys for calling up the menu for selecting the boot device, motherboard manufacturer and BIOS.

Yes, and one last clarification. In some cases, boot menu hotkeys are disabled by default in the BIOS. To be able to use the boot menu, you need to enable it in the BIOS settings. Typically this function is called F12 Boot Menu . To enable this feature, you must set its value to Enabled .

In addition to the keys for calling the boot menu, the table shows keys for entering the BIOS.