Disable password prompt on windows 10 laptop

Creating a password for your account helps protect the user's personal information from third parties. This is especially true for office workers or family members using one computer. If you are the only person sitting at your laptop, each time you enter your password when you turn it on and after waking up from sleep mode, it will take up precious time. To log in faster and immediately gain access to the desktop, just remove the password when logging into Windows 10.

For those users who log in using a local account rather than a Microsoft account, you can cancel the password through the “Settings” section in the “Start” menu. Open "Accounts", go to "Sign-in Options" and click on "Change" under the "Password" heading. In the window that opens, enter your current password and click “Next.” You will then be prompted to change it. Here you need to leave all three columns empty, click “Next” and confirm “Done”.

You can disable the password request for your account in Windows 10 using the Run window. Right-click on the Start menu icon or open the window on the keyboard using the Win + R combination. In the “Open:” field, type netplwiz, press Ok or Enter. In the window that appears, uncheck the “Require username and password” checkbox and click “Apply.” The “Automatic login” window will pop up. In the user column the name of your account will be entered, and the remaining lines should remain empty. By clicking OK, you agree to log into Windows 10 without entering a password.

Removing the password from your computer after resuming from sleep mode is quite easy through the “Settings” section in the “Start” menu. Open Accounts and find Sign-in Options. In the drop-down menu for the “Login Required” heading, select “Never.” Now, even if you get distracted and the laptop goes into sleep mode, you won’t have to remember the password and constantly enter it.

Remember that by deactivating this feature in Windows 10, you open automatic access to the system to everyone who decides to use your laptop or PC. Before disabling the password request for your account, think about possible risks and consequences and only then make an affirmative decision.

OS login password - reliable protection data on the hard drive from being viewed by strangers. But if computer equipment is at the disposal of only its owner, then restricting access is unnecessary. In order to remove the password when logging in Windows system 10, you will need to erase the code word previously written there in the settings of the created entry. But often they remember about removing restrictions when they cannot log into the OS and the user table parameters are unavailable. In this case, they use tricks.

Cancel password entry for a user account

Cancel password entry when resuming from sleep mode

Using the Registry - For Advanced Users

Disabling the request through the "Power Options" section on awakening

Account settings

Every day more and more PC users are switching to Windows 10. Either they have started to get used to it, or it has become fashionable. For some, Windows 10 is simply teeming with shortcomings. But, do not forget about some of its obvious and important advantages. The latter include fast speed downloads. Turning on Windows would be even faster if it weren’t for entering the password.

Of course, a password is a necessary thing when you need to save information from prying eyes. But, if only you sit at the computer, then by and large you don’t need it. Moreover, some are annoyed by constantly entering a secret combination. Today I will teach you how you can remove the password when logging into Windows 10.

Don't forget about the danger

Before you learn and can remove the password when logging into Windows 10, think about whether it’s worth doing it at all. After all, all files will become publicly available to any user who sits down at your computer.

The password should not be removed if:

• It stores important information and other family members use the computer, especially children or novice users.
• You need to take your computer to a service center for repair.
• You have decided to stop using antivirus programs(some types of Trojans realize their full potential only under passwordless accounts with administrative rights).

If you still decide to remove the password when logging into Windows 10, then we will tell you about three simple ways how to do it.

Disabling the password through “User Accounts”

In order to launch the snap-in, you need to call the “Run” utility. The key combination Win+r will help us with this. After the “Run” window appears, you need to enter the “netplwiz” command in the data entry field and click “OK”.

After this, the “User Accounts” window will open. Click on your account and uncheck the “Require username and password” checkbox. To save the setting, click “ok”.

In the newly appeared window, we again confirm our intentions to refuse to enter a password when logging into the system.

We restart the system to ensure that the procedure was carried out correctly. On subsequent startups, the OS will not prompt you for a password to log in.

Resetting the password.

This method does not remove the password entry form from the authorization window, but after it is completed, logging into the local administrator’s account will be available after pressing the “Enter” key.

Let's move on to zeroing:

Open the Start menu and launch the Settings application.

Now you need to go to the “accounts” section.

Open the “Login Options” subsection and near the “Password” item, click on the “Change” button.

Now, to confirm your actions, enter the current OS password in the password field.

In the window that opens next, leave the first and second fields blank. In the latter, enter a hint for a new, “empty” password.

After saving the settings, reboot the system to check the results of the work done.

Disable the password through the registry.

This method of disabling a password through the registry is a little more complicated than the previous ones, but still, it should not cause any difficulties. The main thing is to do everything as I say.

This method should only be used if the account management snap-in does not respond for some reason.

Let us remind you once again that you need to follow only the plan that I describe to you. After all, all changes in the registry are responsible for loading Windows. “Taking a wrong turn” will immediately disrupt the loading of the OS and Windows will have to be interrupted.

To start performing this procedure, you need to open the “Run” window, that is, the registry editor. In the “Open” input field, enter the following introductory “regedit” and click “ok”.

You will see a window divided into two parts. On the left side you need to go to the following path “HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon”.

In the list of parameters on the right half, find “AutoAdminLogon”. Right-click on it and select “Edit” from the menu.

In the “Value” field of the parameter change window, put one (instead of zero) and save the setting.

You can check whether the above procedure was successful after restarting the computer. If, when loading the OS, you no longer see the window for entering the password, but you already see the desktop, then you are great and did everything correctly.

If you are an inexperienced PC user and are afraid to go into the registry yourself, you can use one of the ready-made solutions: a console command or a reg file. Both solutions perform the same action: change the “AutoAdminLogon” value from 0 to 1.

Is it possible to disable password protection on a Microsoft account?

Since a Microsoft account is also needed to purchase various features in Windows store, to synchronize data between devices and to access account management through the corporation's website, you must use a password. You can also do it through your account Windows activation. Therefore it is impossible to remove it.

If you find it very difficult to enter a password when logging into the OS using a Microsoft account, the corporation suggests replacing it with a PIN code (numeric device identifier) ​​or graphic password. This will be more comfortable for you.

Romanov Stanislav 10.01.2019 1473494

How to remove password when logging into Windows 10?

Do you want to quickly boot into work? Windows table 10, skipping the login screen? Want to avoid entering a password? account every time you turn on the computer? You can easily disable the login password and configure Windows operation 10 on automatic download to the desktop or start screen without entering it.

The main advantage of logging in without a password is that the account will not require you to enter it, which means you do not need to remember it and spend several seconds during loading. That is, it will launch the desktop a couple of seconds faster. But, on the other hand, remember that it is much easier to access a PC without a password (for example, for children).

The procedure for setting up automatic login in Windows 10 is very similar to the same operations in Windows 7 and Windows 8. Therefore, some of the screenshots were taken in Windows 8.1. This method applies to both the local account and the Microsoft records. In other words, you can use these instructions regardless of your account type.

Warning: turn on automatic login only if you are the only PC user. If the computer is used by other people (and children), it is best to keep the accounts locked.

You can follow one of the methods given below to enable automatic login in Windows 10 without entering a password.

Method No. 1 for automatic login without entering a password

This is the easiest way to remove password from Windows 10 login screen.

Step 1: Open the Run window by simultaneously pressing Win+R (key with Windows logo and the R key). In the dialog box, type Netplwiz and then press enter.

Step 2: This will bring up the "Accounts" dialog box, select the user account, and then uncheck the "Require username and password" option. Click the “Apply” button, then the “Automatic login” window will open.

Step 3: In the automatic login dialog, enter the password, re-enter it to confirm, and click “OK”.

Step 4: Make sure the check mark is gone. You can try rebooting the system to check the effect.

Method No. 2 to remove the password through the registry

If, for some reason, you are unable to set up automatic login in Windows 10 by following the above method, please use this one.

Step 1: Open Registry Editor. To do this, open the Run window (using the Win+R keyboard shortcut), type Regedit in the available field and press Enter. Click the “Yes” button if a new window appears asking you to make changes to the system.

Step 2: In Registry Editor, navigate to the following section:

HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon

Step 3: On the right side of the editor, find the option called DefaultUserName, double-click on it and make sure that the name of your Microsoft account or local user account is mentioned in the “Value” field.

Step 4: Next, again in the same part of the window, find the DefaultPassword parameter. If there is no entry, create one by right-clicking on the empty space, clicking the New button, and then clicking on String Value. Rename it DefaultPassword and enter the password in the Value field. Click OK.

Step 5: Lastly, you need to enable automatic login. To do this, in the same part of the editor, find the entry labeled AutoAdminLogon, and then change its value from “0” (zero) to “1” (one).

In Windows 10, as in previous versions this OS, you can use special modes to shut down and quick recovery sessions. For example, hibernation mode, which allows you to save everything you did in a given session and switch the computer to lower energy consumption. At the same time, even if it is not possible to recharge the laptop or connect the PC to the network, the hibernation mode will save everything on the hard drive until turned on. But after turning it on, you are asked to enter your account password every time, which is very annoying if you are the only one using the computer. We suggest considering ways to remove the login password in Windows 10.

How to remove the login password in Windows 10. Method 1

The simplest method that is suitable for all users, including beginners who recently switched to the “top ten”.

This completes the steps of method No. 1. Now we know how to disable the login password in Windows 10. Let's move on to the second method of disconnection.

How to remove the login password in Windows 10. Method 2

This option to cancel login with a password is a little more difficult for inexperienced users, but not as complicated as it might seem. Let's use the keyboard and enter the combination Win + R. In the Run utility window, enter “Netplwiz”:

In fact, there are a lot of ways to disable the login password in Windows 10. You can even use the option through the registry, but so that you don’t accidentally mess things up in this segment of the system, we didn’t consider it. The methods presented above are the most optimal and everyone can choose the one that suits them.