Switch the call to tone mode. How to put your phone into tone mode - what is it? Switching to tone mode on your phone
How to enable the mode tone dialing?
The question is how to transfer the phone to tone mode, often takes people by surprise when trying to contact support or ordering various services.
The fact is that to work with new communication systems and various services What you need is tone mode. What it is, why it is needed and how to enable it on your phone will be discussed today.
Why do you need tone mode?
In total, there are two dialing modes on a telephone: pulse and tone. The difference between them is that pulse dialing occurs using alternate line interruptions, while tone dialing occurs using digital signals.
There was an impulse invented first, and in our time it is considered old, but nevertheless it is still found in some devices. The principle of its operation was to interrupt the lines at which clicks occurred (number 1 - one click, number 2 - two clicks, and so on).
The invention of touch-tone dialing made it possible to speed up networks and make the dialing process more convenient. Plus, this opened up many possibilities, in particular voice prompts (like telecom operators), telephone alarms and others.
In this order, each button is assigned a specific tone (or signal), which, when a number is dialed, is sent to the operator and processed properly.
Despite the fact that most devices immediately operate in tone mode, and pulse mode is already a thing of the past, sometimes there is still a need to switch between them, which often raises the question of how to enable tone mode on the phone.
Check and switch
Now that it is used everywhere digital signal, almost everyone landline phone By default it works in the tone schedule. And yet, to get started, you need to determine in what order the device is currently operating and whether it needs to be changed.
This is done simply. You need to bring the handset to your ear and, by pressing any key, determine what sounds are heard when pressed.
If you can hear short beeps, this means that the tone dialing mode is turned on, and there is no need to switch it. If there are clicks, it means that the device operates in a pulse mode, and this mode needs to be changed.
The easiest way to put your phone into tone mode from Panasonic (the most popular) and other companies is to hold down the “*” button for a few seconds. If that doesn't work, try "#".
If the corresponding order has been activated, then the inscription ton or t should appear on the device’s screen. If nothing happens, you can test again by listening to the sounds when you press the buttons.
You need to understand that not all devices are equipped with the function fast switching functions. On some models there are special “P” and “T” buttons for this purpose.
In some cases, you need to press the appropriate combination of “*”, “#” and “-”. You can learn more about this only from the instructions for the phone, or you can go to its settings (if provided), and there look for an item that switches the phone to a different dialing order.
Translation into tonal order can also be problematic for touch models on your mobile phone. In order to configure the function you need, after connecting, you must use special key to access directly the keyboard itself. When it appears, press the star and plus, after which you can translate cell phone to tone mode.
During a conversation, press the keyboard to display the number dialing menu. Then enter a custom combination of numbers that is specific to your device. You can find this information in the phone review or in the instructions for using it.
Today you learned how to switch a cell phone to tone mode and how this can be done with a landline device at home.
http://lediznaet.ru
Often, when contacting support or calling a hotline, the subscriber is urged to switch to touch-tone dialing. As a rule, this happens when trying to call a multi-channel number, which involves pressing numbers on the handset of the phone to confirm the choice. It’s not difficult even for a beginner to understand such nuances.
What is tone mode on a phone?
Telephone connection– it’s a complicated thing, but at the same time incredibly interesting. For this reason, before switching the phone to tone mode, it is worth understanding its essence and considering what other dialing options are available. Telecommunication technologies are moving far ahead every year, and now modern devices only support tone type. For devices released earlier, you still have to switch between two:
- pulse, which involves closing the telephone line in a special way, where each dialed digit corresponds to the number of pulses.
- tonal, using analog signal to dial the required combination of numbers.
A user who does not understand the intricacies of this topic will be able to distinguish these methods of entering numbers by ear. Remember the old rotary phones: when you scrolled the disk, you heard some clicks that differed depending on the number. Some devices released even 10-15 years ago still have the ability to switch to pulse mode. Another input method will give itself away as a difference in the signal height, which will depend on the key pressed. The advantage of tone digital input over pulse input lies primarily in the speed of dialing and connecting with the subscriber.
Tone mode on a landline phone
With the passage of time and the development of internal telephone networks, abandoning the outdated pulse dialing seems quite logical. Multifunctional office phones, similar to those produced by Avaya, do not even have the ability to change modes. This is understandable, since in large companies work is constantly in full swing, and the speed of dialing to a client or partner is important.
Home devices will make you worry about how to enable tone mode on your phone. For example, the list of characteristics of the wired model of a Panasonic device states that both options are available. In some cases, pressing buttons is not enough to switch between them, and you should contact your communications service company for help. It is a mistake to believe that absolutely all radio telephones, unlike wired telephones, have only tone dialing. Voxtel Select series devices support both methods of transmitting a telephone number.
Tone mode on a mobile phone
It is more profitable to make calls to long-distance hotlines, where you have to listen to an answering machine for a long time, from a mobile phone. Most devices are equipped with only one input method, so the question of how to switch a cell phone to tone mode does not arise. To switch to the extension line of the desired operator, you will need to press keys with certain numbers, which is only possible with the tone option. A person dialing a call center number will hear a characteristic signal, indicating that communication has been established with the selected operator.
There has never been a pulse connection on mobile phones, since this is a feature of telephone networks for landline devices, and the modernization of Russian telephone exchanges has made it possible to abandon this option forever. However, it may not be necessary to switch between input methods, but to enable the desired type of connection that was disabled for some reason. Without activating this function, some devices will not allow you to dial a number.
How to put a mobile phone into tone mode
If we answer this question in general and in relation to each gadget, but there is only one answer - nothing! By default, all phones support and operate in tone mode and do not provide any other selection options. However, there are exceptions to the rules: you cannot transfer to another set, but you can simply turn off the existing tone set. This instruction explains how to switch to tone mode on a mobile phone touch control:
- Dial telephone number.
- Once the connection is established, call on-screen keyboard.
- Press the star or plus key. For various models gadgets, you may need to hold these buttons for a while.
This algorithm will also be effective for owners push-button models phones. Here the situation is even somewhat simpler: you don’t need to open the keyboard on the screen. Having reached the dialed number and heard a request to turn on tone input, which was probably turned off, you only need to press and hold one of the keys (usually “star”, “pound” or “plus”) until a characteristic signal.
Switching a landline phone to tone mode
Internal structure home communication devices, as well as telephone lines, determines the choice of mode change method. In most cases, this can be done without leaving the apartment or private house. How to put your phone into tone mode in the classic way is described in following instructions:
- Pick up the phone if you have a corded one, or press the call key on your radiotelephone.
- Hold the star button for a second.
- Try pressing the number keys: if they make sounds that are different in tone, then everything is done correctly.
Another option will do only for some models:
- Inspect the tube from all sides for the location of additional levers on it.
- If you notice a switch with in Latin letters P and T, meaning pulse and tone dialing, then move the lever to the T position.
- You can check by pressing the number buttons.
Video: Tone mode
How to put your phone into tone mode?
I have to make a lot of calls during the day. And very often, to reach operators through the answering machine menu. you have to put the phone into tone mode. To do this, I usually click on the button with an asterisk - *
Question, how to put your phone into tone mode, for many young people does not make sense at all, since they have only dealt with mobile phones that have this mode installed by default.
As for older people, they still remember analog phones that had a rotating dial for dialing. Appeared later digital phones had two dialing modes: traditional and tonal. During tone dialing, sounds of different pitches are heard, each of which corresponds to one digit. To put your landline phone into tone mode you need to either press the asterisk * or switch the tone switch to tone mode. The mode switch is usually located on the back of the telephone, where the wire connects.
Most corded phones, as well as many older models, are indeed being converted to tone mode using the slider, which is usually located at the bottom of the telephone or on its back wall. This function indicated by Tone / T and Pulse / P. Move the slider to the T position and the phone will work in tone mode.
Not everything is so simple with new phone models. Required function may be hidden somewhere in the phone menu and in order to use it and switch the phone to tone mode, you should carefully study the instructions. For different models the setup may vary significantly.
If the phone is equipped with two dialing systems - tone and pulse, and at the same time operates in pulse mode by default, there are two options for switching modes. One of them is mechanical, with a microswitch on the phone body marked T and I.
The second option is simpler - just press the button with the asterisk sign while the handset is off-hook.
There are also phone models in which dialing modes are switched through the phone menu - here you will have to read the instructions for this phone model.
First you need to determine in what mode the phone operates, tone or pulse.
If you hear clicks after pressing the button, then the mode is pulsed, if you hear short signals then tone mode.
Press the button on your phone * (asterisk) - this method of switching to tone mode is suitable for most devices.
You can switch on the phone body using special buttons, but usually just holding down the asterisk is enough. But I always had to do this through the phone settings, in the sounds tab - everything is simple and clear there, just check/uncheck or select the desired mode and that’s it. Therefore, there is nothing complicated about it, the main thing is to choose the most suitable and convenient method for yourself.
To translate home phone to tone mode When the handset is off-hook, you need to press the star. In some phone models you need to translate through the menu. A mobile phone There is no need to translate - it is already in tone mode.
At work, to put the phone into tone mode, just press the * button, below it and the inscription is in English tone.
And on a home telephone, there is a key on the back of the device to switch to tone mode.
Cell phones, if I'm not mistaken, are already configured in tone mode. To switch a landline phone to tone mode, press the asterisk (*).
Some early models of mobile phones still offer the option to switch the phone to tone mode. Other mobile devices already set to tone mode.
if you need to change the mode yourself, then press the asterisk and hold it.
The phone has two modes - tone and pulse. In pulse mode, when you press the buttons, clicks will be heard. If tone mode is selected on your phone, then when you press you will hear a short sound signals. Most phones have an easy way to change from one mode to another. You just need to unlock the phone and hold the star until the mode changes.
By default, the tone mode is already installed on the phone. It all depends on the phone’s firmware; there are a lot of touch-tone and simple ones. During a conversation - this is when the connection has already started, press * (asterisk) and just wait for the mode to change. This action is suitable for almost all telephones.
The telephone set should have such a button, or rather a switch, and the tone mode is indicated by tone. Inspect the device and find it.
Many of us at least sometimes have to call multi-line phones to various hotlines. It’s easier to do this from a mobile phone, but sometimes more expensive, because the operator begins to read money from the beginning of the connection. First, you listen to an answering machine message that asks you to choose which specialist to connect with, and then in some cases you will have to spend more than one minute on the line waiting for the operator to respond. In this case, it is more profitable to use a landline device, but in this case you need to decide how to transfer the phone to
Phone operating modes
There are two options for telephone operation - pulse and tone. Talking over is possible if you turn on the tone mode. and PBXs support pulse dialing by default. Modern digital PBXs and more advanced telephone models are tone-on-tone. You can determine how your phone is configured by default by holding the handset to your ear and listening to the sounds it makes as you dial a number:
- On a phone set to pulse mode by default, you will hear characteristic clicks, the number of which corresponds to the dialed digit.
- In tone mode, a characteristic sound signal will be heard in the speaker.
If you heard the sounds described in the first case, to call hotline you need to know how to put your phone into tone mode. However, it is worth noting that owners will not be able to do this without purchasing additional equipment.
How to find instructions for your telephone
First of all, when we need to study new feature any item, we refer to the instructions. It comes complete with any equipment. In it you can find a lot of very useful tips, including how to switch your phone to tone mode. If the user manual is lost along with the box or was not there initially, you should use the tips offered later in our article.
The easiest way to put your phone into tone mode
Sometimes, for objective reasons, it is impossible to find the user manual, or it may only contain technical description models, and the functions are disclosed very poorly. In this case, use a simple and proven method of switching to tone mode.
Once you have dialed the number and are connected to the answering machine, press the star (*) and hold it for a couple of seconds. Usually this is enough to immediately switch to the required mode. If the transition does not work, then you should try again. If the transition procedure is successful, you can enter any extension numbers. However, you will need to go through this procedure every time you call.
Tone mode and its features
Panasonic specialists thought about introducing tone mode in their devices before other companies. It is no secret that its spread everywhere remains only a matter of time, everything more PBXs use digital technologies, and organizations create multi-channel numbers for convenience. Before you translate Panasonic phone into tone mode, examine the device carefully. On some models you may see a "tone" key or a "pulse-tone" switch. The switch must be set to “tone” mode, and the key just needs to be pressed.
Modern radiotelephones of this brand are programmed by default for tone dialing mode, and additional settings Most often you do not need to enter it. If the program is broken, then using the instructions it is easy to fix it.
Instructions
Press the “*” button on your telephone - this is the easiest way to switch the device to tone mode, provided that your phone is in this mode.
Find the “P” and “T” buttons on yours; they can be on the side of the device or on the bottom. If there are such buttons, it means that the phone is switched to tone mode with their help. Press the "T" button to go to desired mode.
If both methods do not work for you, please refer to the instructions included with the device. Some models of devices are switched to tone mode using completely different keys.
Video on the topic
Please note
If you are not sure of the correct combination to dial to switch the phone to tone mode, use the instructions, otherwise, by careless actions you can enable completely different functions or render the telephone unusable.
Perhaps your phone initially works in tone mode, and you should not waste time searching for combinations, just listen to the sounds the phone makes when dialing a number.
Sources:
- how to switch your phone from touch tone mode
Even if your telephone exchange only works in pulse mode, autoinformers installed in some organizations accept only tone commands. To interact with them, you have to switch the telephone to the appropriate mode.
Instructions
If you called the automatic informant number using a mobile phone, then it already works in tone mode. If it turns out that the autoinformer does not respond to commands, find in the device menu an item corresponding to the DTMF signal transmission mode (it is called differently in different phones). Allow the transmission of such signals.
Find out if your telephone exchange supports touch tone mode. If it turns out that the PBX has been upgraded and is now capable of being controlled in this way, switch your home telephone to tone mode, and dialing numbers will speed up significantly. To do this, find a switch on its bottom or one of the side walls, marked P-T or Pulse-Tone. Switch it to T or Tone mode. Then check whether the PBX responds to tone commands, and if not, switch the phone back to pulse mode.
In some wired devices (mostly equipped with radio tubes), switching to tone mode is carried out not by a mechanical switch, but through a menu. Find the location of the corresponding menu item in the instructions or yourself.
If the PBX does not support tone mode, it is inconvenient to use a switch or menu every time you need to use an automatic informant. Leaving the device switched to pulse mode, after dialing the number, press the asterisk key. The device will switch to tone mode and will remain in it until you hang up.
Disc and early push-button phones do not support tone mode at all. After calling from such a device to the answering machine, wait for the secretary’s response, and then ask him to manually connect you to the desired subscriber. If communication with the secretary is not provided, use a special autonomous device - a beeper. Bring it to the microphone and press the buttons with the desired numbers.
In ordinary city telephones there are two types of dialing: the so-called pulse, known since rotary phones, and tonal. Currently, it is generally accepted that pulse dialing (when the number of pulses and interruptions corresponds to a particular dialed digit of a number) is a relic of the past. Nowadays, tone dialing is increasingly used (in which a number is dialed using special tone parcels). However, quite often telephone exchanges do not support tone dialing.
Instructions
Some phone models do not natively support touch tone mode. For example, disk telephone sets created only for pulse dialing. If you have a similar device, you can safely use its functions.