Connecting a mobile phone to the car via Bluetooth. How to connect your phone to the radio via AUX, Bluetooth and USB? Current methods

Current trends encourage development wireless methods connecting any equipment. New gadgets come out with a minimum number of connectors, even charging has become wireless. On this wave, I want to get rid of unnecessary wires and cords as much as possible. But what to do if your car is several years old, you want to listen to music without phone cords dangling near the gearbox, and the radio does not support wireless connection of audio devices? A Bluetooth AUX adapter can come to the rescue. In this article we will look at their various options and connection methods.

What is an adapter?

This gadget is quite simple. It works on the same principle as for smartphones. The only difference is that instead of headphones at its output there is a plug for connection to the standard connector of the radio, designed to supply a linear audio signal. will allow you to get rid of the cable dangling under your arms and sometimes your legs, will preserve the audio jack of your smartphone and, with proper quality, will in no way affect the width frequency range and pleasant sound.

How to choose the right device

First of all, you should check whether your radio has a connector for feeding line signal. If it's not there, don't despair. One of the options for solving this problem will be discussed a little later.

You need to decide what sound quality you would like to achieve. If you are a music lover, then you should take a closer look at the branded USB Bluetooth Aux devices, for example from Sony, since they have a higher quality audio path. If the presence of music as such is more important to you, but the richness of the sound can be neglected, or the acoustics are simply not capable of delivering high quality sound, and the difference as a result of this will not be very noticeable, that is, it makes sense to save money and take an inexpensive adapter from one of Chinese brands. Its price will be an order of magnitude lower, but it’s worth thinking about possible problems with signal reception quality.

Does it make sense to take an adapter with an internal battery?

Often, Bluetooth AUX adapters for cars are immediately connected to the network through the cigarette lighter socket. But is an internal battery needed in this case? It can be useful in two cases.

The first is to turn off the power at the outlet when the engine starts. Some vehicles have automatic shutdown all secondary systems in order to maximize the redirection of all battery power to the starter. In addition, such shutdowns provide protection against unstable voltage when the engine starts, which prevents connected devices from breaking down. But at the same time, the connection with the smartphone will be interrupted, and it will take about a minute to restore it. If this does not suit you, it is better to take an adapter with a battery, even a small one.

The second case in which the battery can be used is that no one is stopping you from using bluetooth audio adapter AUX as a portable headset by connecting headphones to the jack. In this case, when choosing a device, you should be careful that it does not have a built-in plug, but is equipped with a male-to-male cable.

What to do if there is no AUX connector in the radio

Often, a similar problem occurs only in old cassette tape recorders, and even then not in all of them. You can eliminate it using another Chinese gadget, which is a mock-up of a cassette with a magnetic head installed inside, which, in turn, is connected by a cable to the sound source. The principle of operation is to generate magnetic fluxes, and for the read head of the radio, this looks like pulling a tape. The sound is of lower quality than direct connection, but still acceptable, and connecting a Bluetooth AUX adapter will not pose any problems.

If the radio is a disk radio, then this method will not work. As a last resort, try looking for the AUX connector on the rear panel of the radio. It is unknown for what reason, but some manufacturers placed it there. If it is not there, then only replacing the radio will help.

How to connect your smartphone to the adapter

This issue is often explained in the instructions for the Bluetooth AUX adapter, but in Chinese versions instructions may only be in hieroglyphs or absent altogether. However, in most cases the connection is made according to the same scheme. Holding the power button after the indication appears puts the device into a mode in which it is detected by nearby gadgets until one of them is synchronized with it.

If this advice did not help, then all that remains is to try to find information on Russian-language forums based on the model code of your adapter. If you are not sure that you can figure out the connection, it is better to select a model before ordering, which, according to user reviews, does not cause problems with setup.

Is it possible to talk on the phone using an adapter?

If you want to make your life easier, then one of the best options will purchase a Bluetooth AUX adapter with a built-in microphone. This way you can free your hands while moving and not be distracted even during urgent calls.

In order for the interlocutor to hear you well, you need to position the adapter so that the microphone is on a short distance from your mouth. If this is not possible, look for a model with a remote microphone that can be fixed to the ceiling near the driver's seat.

Conclusion

The Bluetooth AUX adapter is suitable for anyone who wants to get rid of unnecessary wires. But before installing it, you should ask yourself a few questions:

Does the radio have an AUX input for connecting a linear audio signal?
Is there a free cigarette lighter socket to plug in the power adapter?
Will it be necessary to talk through an adapter, and if so, is it possible to place the microphone correctly?
What sound quality is required as a result?

By answering these questions, you can decide which device you should buy and at what cost. Enjoy listening to your favorite tracks while driving!

Nowadays, most of the means for connecting mobile phone to your car stereo. The most popular method is to connect to your car's stereo via a wireless connection called Bluetooth.

Naturally, this connection the device does not require any cords or any additional wires, which is certainly a huge plus for car enthusiasts. This connection results in complete integration between the mobile equipment and the car radio. Consequently, the mobile device can be safely stored in a pocket, bag or backpack, because control occurs directly from the car audio system itself. Car stereo system with using Bluetooth can also launch not only audio recordings, but also videos, if, of course, you have a screen on your car radio. More this function allows you to make and receive calls on your phone using the " hands free", that is, the driver simply presses the "accept" button on the radio incoming call” and talks calmly, without being distracted from driving.

It should immediately be noted that this type connections are not supported by all car players. And not all car radios sold in car stores will be able to support this function.

In principle, this is the only negative wireless connection, in all other respects, this is the most progressive type of connecting devices and it is certainly very convenient. Well, it happens that files with a large amount of content may not work correctly, but this directly depends on the quality Bluetooth module. But even for cars that were not equipped with this equipment from the factory, you can enable this option without any problems.

For everything to work, it is necessary that the modules on the mobile equipment wireless communication and the wireless communication modules on the car radio had a certain number of protocols, and also a2dp. Many automotive devices have internal support for this protocol.

There are two methods for connecting mobile equipment to the radio via Bluetooth. The only difference between these methods is the device from which the connection will be made directly. And the connection technique will be slightly different.

First connection method

So, the first method is to connect from a car radio; and the second way is to connect with mobile device.

This does not mean at all that any one device will be involved in the connection itself, it only means which device will be used to a greater extent.

All you need to connect from a mobile phone is to take your mobile device, go to the phone settings and activate the Bluetooth function. Afterwards, scan devices nearby. Through certain time a name or icon should appear on your phone screen car device, radio tape recorders. Click on the name of the car and now you need to confirm the connection of the devices. A request to connect your mobile device should appear on the car radio display. After the devices begin to interact with each other, play the desired image on your mobile device. musical composition and you can safely use the options provided.

Second connection method

And the second method is basically identical to the first, only we connect from the car audio system
or on-board computer. We go into the radio settings and look for the Bluetooth function and activate it. Click on the “search for free devices” button and wait for the radio to find our mobile device. When a list of devices located nearby appears on the radio screen, you need to select the device that we need. Then we connect to it and wait for confirmation. A connection request will appear on the phone screen. Confirm this request. After which your devices will interact with each other, and you can already use this function.

To check our connection, we need to play some audio recording or video recording from the radio. If everything worked out, then you did everything right.

Conclusion

In the modern world, a car has long become a means of transportation, not a luxury. And many car enthusiasts simply cannot imagine their car without a good and high-quality audio system, but listening to the radio or listening to music from CDs is already a thing of the past. And therefore in lately The issue of connecting a mobile device to a radio has become very relevant, especially connecting via Bluetooth wireless communication. And with the help of this article, you will not have any questions about connecting your phone to the car audio system, for music and other provided options.

People are often interested in how to pair a phone with a car radio. IN modern phones everything appears more various functions. Auto manufacturers quickly respond to this popularity and even now budget models radios can be paired with mobile phones. If we consider expensive models, then with their help you can control many parameters of the car. However, all this becomes available only when correct connection and of course setup.

Today, many ways have been invented to conveniently connect a phone to a radio. The latter plays the role of a sound amplifier. This connection is very convenient, as it allows you to listen to your favorite music from your phone without making design changes to the radio. Let's now look at the most common and simple ways connecting an MP-3 player or smartphone to the car audio system. They are all different and depend on the design features of the audio system.

How to connect your phone to the radio via USB

The most common connection method is using a USB connector. Today there is no radio tape recorder that does not have a standard USB output. This output is intended for connecting regular computer flash drives. It is into this connector that the mobile phone is connected via a cord to connect to the computer. Cheap radios do not integrate with the phone and mistake it for a regular flash drive. To play music, you need to connect your phone to the radio. Go to the smartphone settings – “USB connection” – “Data transfer”. After these steps, music files from the phone will be played on the radio. You can only manage music files from the radio!

How to connect your phone to the radio via AUX

This is one of the most ancient ways to connect a radio to to third party media. These outputs were installed back in cassette players, which made it possible to connect them to other devices. This is a regular 3.5 jack, which is used on phones to connect headphones. Now in any gadget store you can buy such a double-sided cord for a symbolic price.

The connection process is very simple - insert the plugs and listen to music. This connection requires the use of a phone player. Music control is done via the phone. The radio just plays the role of an amplifier; you can use it to adjust the volume level.

How to connect your phone to the radio via Bluetooth

The most innovative is the use bluetooth connection. Please note that not every car audio system supports this method. It can only be used by owners of multimedia systems with touch display. No wires are needed here. You need to turn on Bluetooth on both devices and pair them. You can put your phone away altogether; you won't need it. There is complete integration between your devices and you can manage files from the radio.

How to connect your phone to the radio via Bluetooth adapter

Connect via AUX connector bluetooth adapter. Turn on Bluetooth on your smartphone and enable visibility for all devices. On the adapter, press the power button. Your phone should find a device called DL-Link. Connect to it and you can play audio and video. The sound in this case will be transmitted through the car speakers. Control only via phone.

Important nuances

Connecting the car's audio system may require entering a special PIN code, which depends on the modification of the radio. This only happens on expensive equipment. If you have an expensive car, read the owner's manual first. As a last resort, you can always find information on the Internet.

If you successfully connect your phone to the radio, you can use the car as wireless headset via speakerphone.

Congratulations, you can now easily connect your phone to your car stereo! We recommend that you study the capabilities of your car in more detail; perhaps you can use your smartphone as an on-board computer.

The car radio can be used to listen to music tracks from the smartphone's memory. You can pair the radio with your smartphone using via USB, Bluetooth, AUX or transmitters. The choice of one method or another depends on the design of the radio and its modification. Let's consider the listed methods in more detail.

USB connection

The most common connection method is via USB port. To connect you will need a regular USB cord, with which the smartphone is connected to the computer. At one end of the cord there is micro USB plug for a phone, on the other there is a standard USB connector.

To integrate the radio with the gadget's operating system, you need to go to the smartphone settings and activate the data transfer mode. After this, the radio will have access to music files. In this case, the radio will be responsible for selecting tracks and adjusting the sound.

Car radios latest generation make it possible to control the process of playing tracks both from your own menu and from the smartphone menu. In the latter case, the user can open a player application on the smartphone, launch a playlist, and use the radio exclusively as a simple amplifier.

REFERENCE. A USB connection allows you not only to play music tracks from your smartphone, but also to slightly recharge the device’s battery.

If there is no contact between the radio and the smartphone, or the phone is charging but the radio does not perceive it, try using a different cable. Most likely the cable is damaged or the port is broken. And make sure that the “Data transfer” function is turned on on your smartphone.

Connecting to a car radio via Bluetooth

If the car radio supports the Bluetooth wireless protocol, then it can integrate with the smartphone operating system without any cords. This protocol is usually supported by the most latest models tape recorders with touch screens.

To connect your smartphone to the radio using Bluetooth, you need to follow three simple steps:

activate Bluetooth mode in the smartphone settings;
wait while the devices synchronize with each other;
select the radio in the list of found devices.

After this, you can control the music playback process using the radio menu.

If Bluetooth is turned on on both devices but there is no connection, try the following:

restart your smartphone;
restart Bluetooth on your phone;
in the settings, activate the “Available to everyone” item;
try to establish the connection again;
update the car system firmware;
update operating system on a smartphone.

IMPORTANT! When playing “heavy” tracks, the smartphone may freeze. To prevent this from happening, keep an eye on the volume of audio files in the gadget playlists.

How to connect your phone via AUX

To pair the radio with a smartphone, you will need a cord with 3.5 mm plugs. One end of the cord is inserted into the AUX socket of the smartphone, the other into the radio.

When connected via AUX, you can control the playback of audio files only through the smartphone menu. The radio will have the ability to adjust the sound and timbre of playback.

IMPORTANT! Not all modern mobile phones are suitable for connecting to a car radio via AUX. For example, iPhone models 7, iPhone 7 Plus do not have this function

If, when connected via the AUX port, the radio does not recognize the smartphone, and the headphone icon appears and disappears on the phone, it means that the equipment is not able to determine which device is connected to it. In this case, installing the SoundAbout application or its analogs will help, allowing you to force sound to the cable or headphones.

Transmitters are transmitters that read data from the phone, convert it into FM radio waves and transmit it to the radio.

Compact FM transmitters are connected to the AUX connector of the phone. After pairing the devices, the player is launched on the smartphone, then the desired wave for broadcasting sound is selected on the transmitter and found on the radio. Control music tracks carried out using a smartphone.

There are also Bluetooth transmitters that connect to the AUX connector on the radio. After connecting the transmitter, the player is launched on the smartphone and the tracks are broadcast to the Bluetooth headset, the functions of which are performed by the transmitter.

Bluetooth transmitters transmit a signal more high quality than FM transmitters, but at the same time they drain the phone’s battery quite quickly. They are recommended to be used in conjunction with a special charger, which will be connected to the cigarette lighter.

Thus, you can connect your phone to the radio using USB, Bluetooth, AUX or a transmitter. The choice of a specific connection method depends on the models of paired devices and the preferences of the car owner. Bluetooth and transmitters allow you to get rid of annoying wires; USB and AUX are suitable for obsolete radios without Bluetooth functionality.

Car electronics are developing and now the presence of a Bluetooth function in the radio is no longer a whim, but a completely acceptable wish. This eliminates the need for disks and flash drives, as music can be played directly from your smartphone. In addition, this way you can receive calls while driving.

Although there is one caveat regarding calls. If you often travel alone in a car and do not want to make your telephone conversations, it’s better to use a regular Bluetooth headset than to shout to the whole salon.

In general, if you want to connect your smartphone to the Partner Blast multimedia speaker via Bluetooth, you will not need to do much.

1. Set your phone visibility

First, make sure that Bluetooth on your smartphone is not only turned on, but also configured correctly. TO correct settings applies open mode visibility so that the device appears in searches. If you have an Android smartphone, disable the detection timeout so that there are no problems during the pairing process with the car.

2. Turn on Bluetooth in your car

Individual settings depend on the make of the car, and if you encounter insurmountable difficulties, you need to look at the manufacturer’s website, where, usually, all necessary information. Overall, the process is not difficult.

For Nissan cars, you need to press Menu on the radio, wait for PHONE SETUP and press Enter. Then scroll the volume control until PAIR PHONE appears and press Enter again. The inscription READY TO PAIR will mean that the equipment is ready for docking.

In Renault cars, after turning on the radio, you need to configure it to work with the phone by pressing the Tel button. Check if Bluetooth is turned on and you can proceed to connecting the device.

In any case, before establishing pairing, you need to make sure that both devices are connected and visible, and only then proceed to the main procedure.

3. Pair your devices

Start searching for devices on your phone. The radio is displayed as "My Car", but can also be named as "My Radio". When you click on the device, you will be asked to enter a pairing code. It is the same everywhere, 1234. Check that the code on the radio display matches the code on the phone. The connection is complete.

Please note that not all phones allow full Bluetooth functionality. Some models are simply not fully compatible with vehicles.