Connecting a hard drive via USB: methods and tips. The computer does not see the external hard drive via USB - what to do?

Ability to connect additional hard drives It will be very useful to you if there is a lack of free disk space on the already installed ones. Connect HDD to personal computer Can:

1. Installed in the system unit using standard SATA connectors on motherboard.
2. Installed into the system unit using the SAS RAID controller connectors.
3. Using a USB-SATA adapter.

This is interesting! PredecessorSATA was the interfaceATA (other name –IDE). The difference lies in the method of data transmission - serial transmissionSATA, parallelATA. It is generally accepted that serial transfer is faster, however, for the average user the difference is invisible.

SATA

Step 1. Remove the housing cover of your system unit.

Step 2. Attach the data cable to the connector on the motherboard.

Note! The connector number is not important. Definition of boot hard drive occurs according to the software installed on it.

Step 3. Connect the data cable to the connector on the hard drive.

Step 4. Connect the power cable to the hard drive connector.

Important! When connecting the cable, the computer's power must be turned off. When connecting a cable with voltage applied to it, there is a high risk of damage to the hard drive controller, or the controllerSATA motherboard! In the event that your power supply has power connectors only for hard drivesIDE, use a special adapter.

Step 5. Secure hard drive on the body with screws.

Important! Make sure that the cables do not come into contact with the cooler blades of the system unit.

If you are using a 2.5-inch drive, use special slides to secure the hard drive more tightly inside the system unit.

Connecting the hard drive inside the case to the connectorsSAS

These connectors are backward compatible, that is, SATA can be connected to SAS, but SAS cannot be connected to SATA.

Step 1. Install the hard drive into a special structure (sled) of the appropriate size.

Note! The designs are designed for certain form factors, that is, inserting a 2.5-inch drive into the controller cage of 3.5-inch hard drives will not work.

Step 2. Insert the slide into the controller basket and push until the slide handle locks in the desired position.

Important! Don't forget to check the cable connectionRAID to the motherboard and change your controller settings.

Connecting a 3.5-inch hard drive using an external power adapter

Step 1. Attach the adapter to the hard drive.

Step 2. Connect the adapter and the desired port on your computer using a USB cable.

Step 3. Connect the power cable to the adapter.

Step 4. Apply power to the adapter by switching the toggle switch to the working position.

Step 5. If necessary, install drivers for the connected equipment.

Connecting a 2.5" hard drive using a 3.5" adapter

2.5" drives are commonly used in laptops. The connectors are no different from the connectors for 3.5 drives, but the laptop hard drive is attached to the case using a special basket (sled).

Step 1. Remove the slides or other structures from your hard drive.

Step 2. Follow the instructions connecting hard 3.5 drive using an adapter.

Connecting a 2.5-inch hard drive using the appropriate adapter

When using a special adapter for 2.5 hard drives, you do not need to remove the slide. As a rule, such adapters do not have external power and receive voltage from the computer’s USB port.

Step 1. Connect the adapter to the hard drive.

Step 2. Connect both ends of the USB adapter cable to the computer ports.

Important! Two ends of the cable are needed because one of them transmits information, and the other carries power to the adapter.

Video - How to connect a hard drive

Conclusion

We looked at three different ways connecting hard drives with SATA connectors to a personal computer. Each of them requires purchase additional equipment, at least - trains. If you decide to use a SATA drive as an external one (connected via a USB adapter), it is recommended to purchase a reliable protective case for the drive. When working with the device, the cover should be removed to avoid overheating. Some options hard drives, working with different technologies, are presented in the summary table.

Hello friends. Sooner or later, disk space runs out. We constantly fill our devices with data and one day we find out that there is no more space on our disk. And I want it to always be there. Today I’ll tell you how you can quickly solve this problem yourself. In today's article we will connect the hard drive to the computer ourselves.

So, friends, you have discovered that you have a problem, but don’t worry, connecting the HDD is actually simple. IN regular computer install from one to six hard drives. You can make them into a place to store files, you can install another operating system. For example, you have Windows 10 on one disk, and Windows friend 7. When necessary, you boot from “seven”, and when not, from “ten” - you can do that. And you can do RAID arrays if necessary.

We connect a 3.5 hard drive from a laptop to a computer via a USB adapter

The easiest and most trouble-free option is to buy an external portable hard disk. This drive is connected via a USB connector and used as a large flash drive. The advantage of this solution is that you can store a lot of things on it? It connects easily to your computer, is compact and easy to carry. There are also disadvantages:

• the presence of a cord that must be connected all the time;
• speed read-write lower than that of a disk connected in the usual way;
• special sensitivity to shocks and falls.

What does this have to do with a laptop disk? Inside this building is the most regular hard laptop disk. And if you have such a used laptop disk, you can make it portable yourself. The most important part is the adapter. You can buy an adapter in a store, taking the disk with you, and the seller will select an adapter for you, and perhaps even beautiful body. Putting everything together we get a portable disk:

It can now be connected to a USB port. Or this option, without an adapter, just a connector screwed to the case, into which the hard drive is then inserted. The case itself can be secured in the system unit basket with screws:

This option is suitable for HDD connections without adapter - inside the system unit. Read on.

Connecting a HDD without an adapter at home

You can easily connect the same 3.5 hard drive yourself. You will need an additional SATA cable for the hard drive and possibly an additional power plug (if there are not enough connectors on the power supply). On sale there are the following cable options where everything is in one:

We open the system unit after disconnecting all the wires from it, and unscrew the screws:

...remove the cover,

Connect the data cable to the motherboard...

...and the hard drive along with the power connector:

It is highly desirable that the 3.5 disk does not hang on the wires. If possible, it is better to secure it in a stationary state to avoid vibrations and shocks.

Then, we find a suitable place for it and, if possible, secure it with standard mounting screws in the basket, or at worst with plumbing tape, so that our disk is firmly and motionlessly fixed. We put the cover of the system unit in place.

How to connect the second one, extra hard disk to computer via SATA connector

If you have a standard hard drive from your computer, you can just as easily connect it as a second drive. We do everything according to the same scheme. At first new disk We fix it with standard screws on both sides in the disk basket so that there is no vibration:

Then we connect the cable and the power connector. The disk is connected.

Connection IDE hard drive to the motherboard and SATA connector

If your computer's motherboard has connectors for connecting an IDE hard drive, you can try connecting such a drive. On the IDE interface for a long time All computers worked like this until 2005. A disk with such an interface looks like this:

The connection socket looks like this:

Sometimes the connectors are multi-colored. And the cable for connecting to the motherboard looks like this:

Block blue connects to the motherboard, black (topmost) to the hard drive, white to the DVD drive.

Eat important point when using IDE drives. If you are going to use such a disk, you need to correctly switch the jumper to the position Master or Slave. This option tells the system what role this disk will play. Master— this disk is considered the main one, and loading will take place from it. Slave— secondary disk.

U different manufacturers own pinout of jumpers. The decoding of the switching modes is always indicated on the disk case:

By setting the jumpers to a certain position, we indicate the priorities - which disk is the main one. Previously, when there were several such disks, it took a lot of time to switch them. The SATA interface does not have these disadvantages. The IDE interface has long been outdated and is no longer used modern devices. However, you can connect your existing IDE drive to the SATA socket on the motherboard using a special adapter. You need to connect the adapter to the IDE drive:

...and a SATA cable and power cable to the motherboard and power supply. In this way you can increase disk space by some albeit small (by modern standards) amount. Everything is more than a flash drive!

If you bought new hard disk, it must be initialized before use, otherwise Windows will not see it, even if it is connected correctly. This is done using special programs Acronis type Disk Director 12. First, install the disk in the system unit, connect, and load Acronis Disk Director:

At first you will not see the new connected disk under Windows. However, if in your Windows versions If the “Disk Management” snap-in is available, you can try to initialize the connected disk through this snap-in. In the photo, we first went to “Computer Management”, then to “Disk Management”.

However, I always use Acronis; it is guaranteed to see all disks connected to the computer.

Need to choose required disk, right-click to open the menu, select “Initialize disk”, and then at the very top click “Apply pending operations”:

After initialization, we create a partition or partitions on the disk, formatting them in a file format. NTFS system. At this point, the operation of connecting the disk to the computer can be considered completely completed. We connected it physically and programmatically. After these steps, the disks can be used for their intended purpose - installing an operating system or making volumes out of them to store your data.

If you decide to install another operating system on a new drive, then after installation, when you boot your computer, you will need to select the drive on which you installed it. This is done through the BIOS. To enter the BIOS, first press the key DEL, and then select the desired disk:

I repeat, you need to select from the list that appears the disk that you need. You can then change the download at any time. In general, you can connect a hard drive yourself very easily, try everything and you will definitely succeed.

Internal hard drives are relatively inexpensive and widely available. Most likely, you have already replaced 1 or 2 such media over the years and some of them are still collecting dust in the bins of your bedside tables. It is for you that we have prepared material on how, with the help of all your body movements, you can take advantage of the opportunity to turn your internal hard drive into an external one with support for the USB interface. If you are interested, then welcome!

To implement our idea large quantity You don’t need any components or any special knowledge. The main component is a special adapter for hard drives, which is a metal case with a USB output, a board and connectors inside the box for connecting the hard drive.

On average, the price for such a design varies around 1000 rubles. The cost depends on the interface. For USB 2.0 you will pay less, for 3.0 you will pay more. The whole difference is in speed.

There is also one important factor to consider: not all adapters are the same. There are several types of them, each of which differs in the supported HDD drives. You can see an example of such a difference in the screenshot below:

Installing a hard drive is quite simple:

1. Insert the hard drive into the appropriate adapter for this particular model.
2. Connect the adapter wires to the hard drive.
3. Use a USB cable to connect the adapter to your computer or laptop.

Important! Since the adapter models, as we have already said, are different, the connection methods may differ slightly. Thus, some adapters require connection to a PC or laptop using two cord wires: one for connecting directly to a computer or laptop, the second for power, the second side of which is plugged directly into an outlet.

Actually, that's all! The only problem you may encounter is when, after all that has been done, the computer system cannot detect the connected device. In this case, we strongly recommend that you read the material on our website dedicated to the actions that need to be taken in such situations.

Perhaps you have unnecessary hard a disk removed from an old computer or laptop that is lying around collecting dust. If yes, then it will require very little investment to turn it into a detachable portable USB drive 2.0 or 3.0. Find out how.

Old laptop disk or desktop computer not very suitable for connecting to new equipment - of course, it does not reach the speed and capacity of new drives that are connected to the computer. However, you can insert old disk into a special case (adapter) and make it into a portable USB drive.

Hard drive adapter

A special adapter is not just a piece of plastic - it includes a set of corresponding inputs and is an adapter for USB. Thanks to it, the hard drive, which is designed to be connected to the motherboard via the appropriate connectors (IDE or SATA), can be connected to a USB port, that is, make it portable.

The prices for adapters are quite reasonable, on average about 1000 rubles. Also, the cost depends on the USB interface - an adapter with USB 2.0 will be cheaper for USB 3.0 (the difference is in data transfer speed).

Types of hard drives by interface

The adapter itself is not universal and needs to be selected suitable model for a specific drive. You should pay attention to the size of the drive (2.5″ or 3.5″), as well as the cable and power cable (ATA/IDE lub SATA).

2.5″ drives are much thinner and are mostly used in laptops. They can be connected via an ATA/IDE cable or a SATA cable.

3.5″ drives are slightly thicker and are usually installed in desktop computer. Also divided into ATA/IDE and SATA.

Sometimes certain combinations can arise - the new connector can be connected via the controller to the “old” motherboard (SATA / IDE). Determining the hard drive is a key point, because you need to choose the appropriate pocket (adapter) for given size and drive interface.

How to choose the right adapter

When choosing an adapter, you should study the properties and find correct model, which is suitable for the method of connecting the hard drive and its connector. Below is an example of randomly selected USB adapters for various types hard drives.

• 2.5″ SATA: NATEC Rhino 3.0;
• 2.5″ IDE: Logilink 2.5;
• 3.5″ SATA: ITEC MySafe Advance 3.5;
• 3.5″ IDE/ATA: PRO-TECH 3.5;
• 3.5″ IDE / SATA: Tracer 731.

Installing a hard drive into the adapter

Installing a hard drive into the adapter will not be difficult a lot of work. Depending on the model, it may vary slightly and usually takes no more than a minute. Place the drive into the adapter housing, and then connect the wires to the appropriate connectors.

Connection features

Depending on the adapter model, interface and hard drive type, it may be outside one or two USB cables. A USB cable is used to connect to a computer port, and a second one may be required for additional power.

When connected via cable USB hard the disk must be immediately detected by the system and available for data transfer.

InstComputer.ru

How to connect a hard drive via USB

To install a hard drive in a computer, you need to carry out a number of procedures to install it, but connecting a hard drive via USB is quite simple, which in turn is an advantage, it is as simple as inserting a USB flash drive.

There are several ways to connect a hard drive to a computer via USB and like this:

Method No. 1. Connecting a hard drive using SATA- USB adapter A.

In my opinion this is one of the simplest and convenient ways connections. This adapter looks like USB cable with a small box at the end that contains connectors for connecting a SATA drive to a computer.

When choosing this adapter, you should pay attention to the fact that it has extra food from an external adapter. Otherwise, if the SATA-USB adapter receives power only via USB, then it will not work with disks large size.

Method number 2. Use an external HDD box 2.5 inches or 3.5, depending on your drive.

An external HDD box is something in the form of a case for your hard drive, inside it has SATA connector, and from the outside there is a USB interface for connection. Although the external box provides some protection for the hard drive, it is still not very convenient to use due to its size, unlike a SATA-USB adapter, and it costs much more.

In addition, this adapter limits you in using the size of your drive, that is, if you have an external HDD box for a 2.5-inch drive, then you will not be able to use a 3.5-inch hard drive in it; for this you will have to purchase another one.

Method No. 3. Using a docking station for HDD.

A docking station for HDD is a stationary device for connecting a hard drive to your PC. It has an advantage over external boxing in that it has open design. Connecting your hard drive to the docking station is easy by simply inserting it into the device.

In addition, you can purchase a universal docking station that allows you to connect 3.5-inch and 2.5-inch drives, which is very convenient. Also, a docking station for HDD can be used for several disks at once.

I also bring to your attention a video from one of the site’s readers on how to connect a hard drive via USB

seohotmix.ru

How to connect a hard drive via USB?

To access the contents of your hard drive via USB from a PC or laptop, you will need a special device - an adapter. The connection is not complicated, the main thing is the presence of a special device. There are several types of devices that allow you to connect the hard drive (hard drive, HDD) of a desktop computer or laptop to USB and open its contents. Here are the two most popular: a universal USB controller (for example, AGESTAR FUBCP) or a case adapter (SATA External case, ITEC MySafe Advance and others).

Which one should you choose? Depends on the goals you have. If opening the hard drive is a one-time operation and is only necessary to copy valuable information, then you can use the first option. For those interested, read about where the space on the hard drive disappears.

In China you can buy the following devices that are built-in instead of a laptop disk drive:

There are also combined options with a complete set (adapter, cord, power supply).

You can buy and see the description at this link: ru.aliexpress.com/adapter

The advantages of the first one are that such a device is cheaper than a case adapter, and often supports several types of connections (SATA, IDE). However, the use regular hard drive It is problematic to use it as a portable drive, since it will not be protected by anything.

The second option, a case adapter, is designed specifically to turn a hard drive into a portable memory device with a sufficiently large capacity, since the case will reliably protect it from dust and mechanical damage. But at the same time, the versatility of the device suffers: before purchasing, you will have to decide which connector the purchased adapter will support.

Using a hard drive in a cased version is a fairly simple procedure, so let’s look at how to connect and open a hard drive via USB using a universal adapter (using the example of AGESTAR FUBCP).

Connection procedure

The first thing you need to do is determine the type of HDD connector that you plan to connect via USB. Plugs come in the following types:

SATA (a more modern connector, used in newly built PCs and laptops);

IDE (can be found mainly in “experienced” PCs).

We will consider the connection using the example of AGESTAR FUBCP, since it supports both “old” and modern HDDs. The average cost of such a device is Russian stores electronics is about 1,500 rubles.

The device is equipped with three interfaces (plugs):

• SATA (7-pin plug).
• IDE 40pin (40-pin plug, for IDE 3.5″).
• IDE 44pin (respectively, 44-pin plug, for IDE 1.8″/2.5″).

Description of AGESTAR FUBCP connectors below.

Step-by-step connection of HDD to computer

So, we have determined the connector of the connected hard drive; now it needs to be connected to the corresponding connector on the device. After this, insert the USB data connector (black) into the USB port of your computer or laptop. If we work with hard drive laptop (2.5”), you can turn on the adapter, and the HDD should appear in the list of computer disks. Sometimes with this hard connection The disk may not have enough power and will not be detected by the system. In this case, turn off and connect the red USB connector of the adapter to any of the computer ports and turn on the adapter again.

If the connected hard drive was previously installed in a PC (3.5” format), the power supply from your PC’s USB will not be enough for it. The AGESTAR FUBCP comes with a power supply for 3.5" hard drives. To open the hard drive via USB, first connect it to the appropriate connector (IDE/SATA), then insert the black USB cable into one of the USB ports of the computer, then connect a power supply that operates on 220 V to the adapter (plug it into a power outlet) .

After all cables are securely connected, turn on the adapter. The connection is complete, the hdd will be detected by the computer, and you can work with it.

it-increment.ru

How to connect an external hard drive to a laptop - simple, detailed and accessible instructions for everyone.

How to connect external hard disk for laptop

External hard drives, otherwise known as external HDDs, have long proven themselves to be a good help for new or outdated laptops. They have an impressive amount of memory and a solid transfer speed, which helps you store data in a safe place, keep everything at hand, share it or copy content from other media. So, if the “native” hard drive is small or busy, purchasing an external one, for example, a terabyte, will fully justify the investment. However, not every owner of this device knows how to connect an external hard drive to a laptop so that it functions with maximum productivity. Let's consider important nuances connections.

A little theory

If you have never had to connect before external media, then before practical implementation familiarize yourself with the theoretical part of the process. The hard drive can be connected to a TV, computer or laptop directly. When connected to a TV, it only supports the viewing function.

The first thing that is required from a user who owns an external hard drive is the ability to disassemble and assemble gadgets, and an understanding of the purpose of all available connectors located on the motherboard of a laptop or PC. If you do not know how to connect a hard drive to a laptop, then it is better to entrust the task to more experienced user. Otherwise, you may accidentally damage the device. If you have minimal knowledge, it will take no more than 15 minutes. Using the contacts for connecting power (on the motherboard), we identify the type of interface available - IDE, SATA or another. The more relevant the interface, the better speed data transfer. Next, we determine which adapters will be needed for connection, for example, SATA-IDE, SATA-USB or the IDE-USB option. It is necessary to take into account that many laptop models do not have external connectors for connecting hard drives, and they must be connected exclusively via a USB port.

Let's look at the available connection types

So, how to connect an internal hard drive to a laptop? The ubiquitous HDD connection interfaces are IDE and SATA. They differ in the speed of information data transfer - IDE provides only 133 Mbit/s, the more productive and modern SATA - about 6 Gbit/s, while SATA Express will give out all 16 Gbit/s. There are other, more rare interfaces for transmitting information, for example, Thunderbolt for Apple. Let's look at how to connect ide hard disk for laptop. IDE or Integrated Drive Electronics is parallel interface connecting storage devices (optical drives, hard drives), has almost disappeared from the markets computer technology. But, although it is rare, it still occurs, it is necessary to mention it. The IDE is connected to the motherboard using a wide IDE cable.

If hard disk ide If it is impossible to connect directly to the laptop motherboard, this is done with an adapter. You can buy an IDE-SATA connector in specialized stores. When purchasing, you need to make sure that the kit includes two cords - a USB cable, a power adapter, a disk with the drivers necessary for the outdated operating system, the adapter itself with connectors and instructions. If a suitable connector is not available, then it is done using USB ports.

Now let's move on to how to connect the hard sata disk to the laptop. SATA or Serial ATA - the so-called serial interface for exchanging information between drives. SATA is considered a more relevant analogue of the ATA (IDE) interface. Fundamentally it is slower than parallel (ATA), but thanks to the use of more high frequencies The SATA interface is faster than the IDE standard. It is connected to the motherboard using a SATA cable. It connects to the laptop either directly to the motherboard, or using an adapter. Each SATA device has its own connector, so there will be no Slave/Master conflict, and several devices can function at the same time.

USB connection

Let's figure out how to connect an external hard drive to a laptop using USB port? First, we find the parameters of our drive, which are indicated on the case. We connect the 3.5-inch drive to the USB port of the device on one side, and to a power outlet on the other. The problem is that often the power supply of a computer or laptop is not enough to promote a given hard drive. Therefore, connecting to the mains makes it possible to transfer data to a PC at a good speed.

A 2.5-inch HDD must be connected to the hard drive on one side, and to the USB connector on the other. But if the USB port does not “produce” the required 5 V, then the second end of the Y-shaped cable should also be connected to the PC. Then external drive will receive the missing power and work without failures. The USB port itself also affects the transfer speed. If in the very first USB 1.0 it did not exceed 12 Mb/s, then in USB 2.0 ports data was already transferred at a more serious speed - 480 Mb/s, which was a pretty good result. And USB 3.0 generally offers super speed - about 5 Gbps.

Connection interfaces can be very different. For example, if the laptop is American, then you can use the Firewire or, for example, eSATA interface, which will make this type of HDD universal. When the laptop “sees” external HDD, it should be tested. You need to create a regular document on the desktop and drag it with the mouse onto the newly connected external hard drive. If all ports are functioning normally, then this process will last a couple of seconds. If you need to install drivers, use the disk or update the drivers via the Internet, and the hard drive will work like a flash drive. Don't forget to assign a drive letter to your new drive.

Connecting regular and removable hard drives

How to connect a regular hard drive to a laptop was partially written above. When you have selected a suitable adapter, it is connected to the PC hard drive using a suitable connector. If you have an IDE interface, you will need a connector with a wide input, and if SATA, then with a narrow one. Then we take the USB connector coming from the adapter and connect it to the USB controller portable device. Then the hard drive will begin to function as a simple storage device from which information will be received or transmitted. Important: the adapter has a built-in LED indicator. Watch the signals it gives: it blinks while transmitting information. Then you can start transferring data.

It remains to find out how to connect removable hard disk for laptop. We take out the USB cable that comes with the hard drive. You can use the cord from any other gadget. We insert one end of it into the side connector on the hard drive box, and the other end of the cable into the USB connector on the side panel of the laptop or PC system unit (behind or front). Click on the “My Computer” shortcut. There, among all the drives, a removable hard drive icon will appear. Double-click on it to open it. Important: to turn off a removable hard drive, you must first close it and click on its icon in the “my computer” manager. Then open the menu with the right mouse button and select the “Eject device” command. Only then do we remove the wire from the connector and put the hard drive in the case.

If you need to constantly use an external hard drive, you need to purchase a container with an adapter for it. This will prevent accidental damage to the device.

Good day everyone, my dear friends. Today I want to tell you about how to connect a hard drive via USB to a computer or laptop. Personally, I had this question when I replaced it on my laptop, after which the old “hard” remained restless, although fully functional. Therefore, I hasten to please you. If you have such a device, then you can make a great one out of it mobile storage data.

There is, however, one small condition. These methods are only suitable for more or less modern hard drives with an interface of at least SATA.

Cam Box - This is (as you understand) a certain box (plastic or metal), inside of which there is a special slot for a particular disk. Naturally, it is worth noting that there are boxes for both large HDDs (3.5) and small ones (2.5), which go under laptops.

The HDD is simply inserted into the box, and after assembly it will be no different from the usual one external hard disk. After that, you just need to insert into it USB cable and connect to your computer. This way you get double benefits:

• You bring an old device back to life and use it;
• You practically get an external HDD for free

On such media you can store any backup and archival copies, or use it in everyday life.

All the fun will cost you an average of 300-500 rubles.

Adapter (SATA-USB)

The easiest and least expensive way is to purchase a special SATA-USB adapter. The adapter itself is a cable, at one end of which there is a connector for connecting a disk, and at the other end there is a USB port.

Well, I think you guessed what needs to be done in this case. Yes, it's simple. Connect the hard drive to the connector, and insert the other end into the USB port of your computer or laptop.

But it’s just worth considering that regular HDD(3.5) One USB cable may not be powerful enough, so purchase a cable with two connectors and use them simultaneously.

Depending on the company and the quality of the product, such cables will cost you approximately 200-600 rubles.

Docking station

The most expensive, but very effective option is to purchase a docking station. These devices are somewhat reminiscent of old consoles like Dendy or Sega. The similarity is that instead of connectors for cartridges, there are connectors for HDDs. All you have to do is simply insert the hard drive into this station, and then connect it via USB to the computer.

There are such devices different types, and in many cases you will be able to work not only with one disk, but with several at once, even of different form factors (2.5 and 3.5).

The cheapest options with one device will cost you no less than 1000 rubles, or even more. More powerful stations cost 3 and 4 thousand rubles each.

As you can see, there are enough ways to connect a hard drive via USB to a computer, for every taste and color. So you no longer have to leave all your devices unattended.

Well, this is where I end my article. I hope you liked it, so don't forget to subscribe to my blog updates and also share blog articles on social networks. Good luck to you. Bye bye!

Best regards, Dmitry Kostin