GIGABYTE BIOS firmware. How to update Bios on a Gigabyte motherboard correctly (Bios from a flash drive)

Let's look at how to properly update the Gigabyte BIOS on your computer or laptop. This procedure will optimize the system and eliminate errors that have arisen.

Gigabyte is a popular Taiwanese company that develops and produces hardware components for computers and laptops (motherboards, video cards, peripherals, cases, graphics accelerators and other products)

TodayGigabyteis the largest manufacturer of motherboards. The corporation's market share is 38% (according to 2017 data). Mainly boards are produced for processors fromIntel(75%), the rest are used in computers with processors fromAMD (25%).

To maintain normal operation processor and error elimination, the manufacturer recommends regularly updating the BIOS for boards from Gigabyte.

Let's take a closer look at how to prepare your computer for the update. system menu and how to choose the required version firmware.

Why update?BIOS?

BIOS is the main system menu of the computer. Translated, the abbreviation stands for “basic input-output system.”

Using BIOS, you can control your computer even if it does not have operating system.

You can also view or change settings for hardware components.

BIOS is the built-in program of the motherboard, so this menu is available on all computers and laptops with processorsIntelAndAMD.

The system menu needs to be updated at least once every few months, as the developer regularly makes adjustments and new features.

This allows increase productivity computer without harming the board , eliminates possible bugs or errors.

Also, it is always easier to work with an updated BIOS version.

The old version's system menu is difficult to use for regular users.

New versions are much easier to interact with, and some firmware even support mouse control.

The following data is updated in the menu:

• Built-in drivers for interaction of connected components;
• Menu interface. From version to version, the location of the tabs, design and appearance main menu;
• New features may be added;
• Improvement of the security system;
• Updating local networks;
• Other firmware.

New BIOS components are usually indicated by the manufacturer next to each firmware version:

It is necessary to update the BIOS if lately you noticed the low speed of your computer began to appear system errors or the PC turns off spontaneously.

Also, if you purchased more than powerful processor and the installed motherboard is compatible with it (the sockets are the same), for normal interaction of the components only a BIOS update is required.

Please note that most updates do not bring major changes. If you regularly install new system menu firmware, your computer will always work stably and you will not encounter problems with the board.

Preparing your computer

Installing a BIOS update is a fairly simple process that even a novice user can handle.

At the same time, it is necessary to be aware of all warnings and recommendations, since in any case there is a danger of disrupting the functioning of the system.

If you do everything according to the instructions, no problems will arise.

Remember:

• You can download BIOS updates only from the manufacturer’s official website gigabyte . com . Otherwise, you can damage the system with a virus or erroneous code, and only a specialist can roll back the update. Also, the board often comes with a disk with a program that automatically searches for the latest updates;
• It is not recommended to install beta or trial versions of the firmware;
• The firmware version must match your motherboard version. Failure to match these parameters will result in a fatal installation error;

A difference in at least one character between the model and firmware is unacceptable. The only exception is in cases where developers fromGigabyteare releasing a general update for the boards. For example, your PC uses a motherboard modelGA- B73- D3 A, and the update is suitable for devices in the seriesGA- B73- XXX. In this case, the update can be installed.

• Never download assemblies modified by other users , even if these installers contain new features or a changed interface;
• During the installation of the update, make sure that the laptop is connected to the power supply. . Losing the power source and shutting down the computer may cause the installation to fail;
• Before installing updates, you need to clean your PC hard drive from temporary files and other “garbage” . The storage device must have sufficient free space(at least 1 GB). Also, the disk should not have bad sectors. If they are, defragment them.

Working with disk

1. To clean up your hard drive, go to the “This PC” window and right-click on the drive icon.

2. Select "Properties" from the drop-down list:

3. In the new window, click on “Disk Cleanup”:

4. Wait for the window with the list of parameters to be deleted to load.

Check the box for various temporary files, error data, reports, thumbnails, cache, trash contents. Click OK to complete the action. Removal may take a long time.

To carry out defragmentation (redistribution of sectors and the logical structure of the disk as a whole), go to the “Tools” tab of the “Disk Properties” window.

First, run a utility to check your disk for errors, and then run defragmentation.

All tasks will be completed automatically.

After completing the work with hard drive restart your computer and proceed to update the BIOS.

View versionBIOS

Before downloading the firmware, you should find out what version of BIOS is installed on your computer.

You can do this as follows:

• Look in the instructions for motherboard;
• If the documentation indicates only the general series of the board family, and not exact model or you do not have documentation, download and install the Everest utility;
• Launch the application and open the tab on the left side of the window "Motherboard" or "System board";
• On the right side of the window, detailed information about the board will be indicated, in particular the version of the installed BIOS.

The firmware number is designated as a serial number or a set of numbers. For example,GIGABYTE GA- B73-1613 or simply 1613.

Firmware selection

Step.1. Remember or write down the current BIOS version of your computer.

Step 2. After that go to Gigabyte.ru and select your country or region. This is necessary to display information in your language. Next, you will be redirected to the official page of the site.

Step 3. The site menu is displayed at the top of the window. Go to the tab "Support". In the new window, click on the field "Select Product Category". Select from the list "Motherboard":

Step 4. In the new window, enter the socket number, chipset or board model. You can view this information in the Everest utility. Next, click on the search key and wait for a list of results with available updates to appear.

Step 5. A tab will open with detailed information about your motherboard. Open the “BIOS” item as shown in the figure below. A table with the latest updates will appear.

Perform setup Computer BIOS welcome in the following cases:

1. Building a PC from scratch;
2. Replacement of components;
3. Availability of integrated graphics in the CPU;
4. Overclocking the central processor and RAM;
5. Fan operation settings system unit;
6. Enable audible emergency alerts;
7. Reinstalling the operating system.

Setting up BIOS for Gigabyte motherboards

To enter the BIOS of Gigabyte boards, press the Del key when booting the computer. On home page (M.I.T.CurrentStatus) see the current one BIOS version, system bus frequency multiplier, quantities CPU frequencies and RAM, memory capacity, temperature and voltage of the central processor.

RAM

At the beginning of 2018, the most common type of RAM for PCs is DDR4, the frequency of which reaches 4266 MHz, which is much higher than DDR3. By default, RAM memory runs at 2133 MHz. Therefore, it is necessary to transfer it to a frequency that meets the specification. The frequency value is hardcoded into the X.M.P profile. To activate it, find the parameter Advanced Memory Settings, further – Extreme Memory Profile (X.M.P.) and set the value to Profile1.

For enthusiasts, memory overclocking is available by changing timings ( Channel A/B Memory Sub Timings) and voltage ( DRAM Voltage Control).

Video adapter settings

At the next stage of setup, we focus on the graphics adapter. The tab will help us with this Peripherals. If the system unit configuration does not imply the use discrete video card, then we activate the built-in CPU graphics core: Initial Display Output– select IGFX. This adapter uses a certain amount of the computer's total RAM. To change its volume in the section Chipset click on DVMT Pre-Allocated and stop at the maximum possible value. And in DVMT Total Gfx Mem make the active size MAX.

If you have an external video card, the option Initial Display Output change to PCIe 1 slot (PCIEX16 slot) or PCIe 2 slot (PCIEX4 slot), and the value Internal Graphics in the submenu Chipset– to Disabled. This is done to reduce the load on the CPU. If you have two monitors, you can use two graphics adapters at once - external and built-in - the choice is up to the user.

Fan control

What is most important – maintaining the lowest possible temperature inside the case or silence? The answer lies in the type of video adapter used. If it generates a lot of heat (from 150 watts), then the hot exhaust air must be removed from the housing as quickly as possible. This is done by coolers located in front, behind and at the top of the system unit. They are connected to the corresponding connectors on the motherboard. But for undemanding tasks, a modern graphics adapter consumes little energy. Therefore, in the large section M.I.T.\PC Health Status in the submenu 1 st System Fan Speed ​​Control, 2 nd System Fan Speed ​​Control And 3 rd System Fan Speed ​​Control set the Normal parameter, which will automatically change the rotation speed of the blades based on the temperature in the system. You can also activate your own graph of this dependence by selecting Manual. These values ​​are set in the subsection Fan Speed ​​Control for each cooler. If the adapter built into the CPU core is responsible for video graphics, then to reduce noise we use the silent mode – Silent.

In the same section the parameter CPU Fan Speed ​​Control (CPU_FAN Connector) responsible for regulating rotation speed CPU cooler. The following options are available: Normal ( automatic operation, depending on the temperature of the CPU cores), Silent (fan runs at reduced speeds), Manual ( manual control), Full Speed ​​(maximum possible degree of rotation).

Alarms

The specifications of central processors imply their operation up to 100 ºС. But the lower the temperature inside the CPU, the longer it will work. Therefore, the BIOS suggests setting a threshold value for this parameter, upon reaching which an alarm is triggered. Find it in the menu M.I.T.\PC Health Status line CPU/System Temperature Warning. By default it is set to Disabled. For processors with low heat generation, it is recommended to change it to 70 ºC/158 ºF, and for “hot” ones – 90 ºC/194 ºF. This parameter depends on how effectively the cooler removes heat from the processor cover. This setting also applicable for case cooling fans.

An alarm will also sound if any of the fans malfunction and are incorrectly connected to the connectors on the system board. To enable this function in the same section, look for CPU/CPU OPT/System Fan Fail Warning and change to Enabled. Recently, coolers with a semi-passive operating mode have begun to appear on the market. When the load on the central processor is light, they do not rotate. In this case, it is advisable to leave the default value - Disabled.

Optimizing the performance of peripheral devices

To install the operating system, it is necessary that the computer, when starting, access the disk where the operating system distribution is located. You can set these parameters in BIOS Features, going to Boot Option Priorities, where as the first boot disk choose HDD, SSD, USB or DVD.

The system is now usually installed on a solid state drive, which in the best possible way works in AHCI mode. You can activate it in the section Peripherals - SATA Configuration and its subsection SATA Mode Selection. Same here, but in a submenu External SATA turn on external devices with SATA interface.

Any motherboard has a built-in audio controller. If the user is not satisfied with the sound quality, he adds an external sound card. Then you need to disable the integrated sound in the menu Chipset – Audio Controller.

Final stage

Confirmation or cancellation of BIOS changes made is done in the section Save &Exit:

• Save &Exit Setup– saving corrections and exiting;
• ExitWithoutSaving– exit without making amendments;
• Load Optimized Defaults– loading the optimal default settings that are required after BIOS updates or clearing CMOS parameters.

Setting up BIOS for Asus motherboards

To log in System BIOS motherboards from Asus, press Del or F2. There are two modes available here − EZ Mode And Advanced Mode. Loads by default EZ Mode. To go to the second state, you need to find the corresponding link below or use the F7 key. Let's take a closer look Advanced Mode.

Options responsible for the operation of coolers in the system are located in QFan Control (F6). There are pre-installed and manual profiles for processor and case fans: Standard, Silent, Turbo, Full Speed, Manual. IN manual mode You can plot the dependence of the degree of rotation of each cooler on temperature.

You can disable the cooler control function in the menu Monitor\Q-Fan Configuration. It is also possible to regulate 3-pin fans by selecting DC Mode.

Utility EZ Tuning Wizard (F11) allows you to overclock the processor taking into account its cooling type. This is relevant for owners Intel processors with index K. In the submenu OS select a scenario for a computer for everyday use (Daily Computing) or a gaming PC (Gaming/Media Editing). Then click on the icon with a box, tower or liquid cooler and start the tuning process.

Activation XMP profile for RAM occurs in the submenu.

For graphics built into the CPU, it is necessary in the section Advanced\System Agent (SA) Configuration\Graphics Configuration\Primary Display set the value to IGFX, and for a discrete video adapter - PEG.

Operating mode of drives with SATA interface configured in Advanced\PCH Storage Configuration\SATA Mode Selection. Select AHCI. Here's the point S.M.A.R.T. Status Check provides condition monitoring hard drives and notifies about errors in their work.

The speed of SSD devices decreases over time as free space fills up. Utility Secure Erase in the menu Tool optimizes work solid state drives, thereby returning them to their original performance.

Information about all connected storage media can be viewed in Advanced\HDD/SSD Smart Information.

Enabling/disabling the audio controller built into the motherboard is carried out in the submenu Advanced\HD Audio Controller.

The priority for loading devices is set in the menu Boot\Boot Option Priorities.

Save and Cancel changes made in BIOS, loading optimal factory settings is available in the main menu Exit.

Setting up the BIOS is important for those who want to get the most out of their computer configuration. Therefore, before installing the operating system, you need to study this procedure in detail, which is described in the instructions supplied in the box with the motherboard.

When updating the BIOS, do users have many questions? How to update, where to get updates, what consequences there may be, in what sequence to perform certain actions. We will look into this issue.

1. Firmware using the APP Center utility
2. Firmware using Q-flash or Q-flash UEFI
3. And firmware from DOS

Firmware using APP Center utility

First, a very important warning!

Download the firmware only for your motherboard model. Do not turn off the power while flashing, otherwise it will damage the BIOS and make the system unable to boot.

This method is not supported by all motherboards. Support may vary by model.

And so let's get started. First, we need to download the APP Center utility from the official Gygabyte website. In “Support” you indicate the motherboard, socket, chipset and model, or if you are not well versed in these concepts, use the search, enter the model of your motherboard there and you will see a page with a download selection. In "Download type" select "utility". A list of utilities will open from which you can download and install APP Center. After installation, run the utility and click Live Update.

After searching for updates, a window with available driver updates will open. Select the "Not installed" icon, check the @BIOS checkbox and click "update". There you can also choose a few more interesting utilities for yourself.

After downloading and installing, open APP Center and launch @BIOS. The @BIOS window will open

There are 2 options for updating the BIOS, saving the current BIOS version and a bonus in the form of changing the boot logo).

Update from Server- BIOS update via the Internet. The program itself detects the model of your motherboard and downloads the firmware, you just need to follow the instructions that appear on the screen to complete the firmware. This method is not highly recommended, since during the update you should not have interruptions in your Internet connection, otherwise you may end up with a damaged BIOS and the system will stop booting.

Update from File- update from the place where you previously downloaded the file from the manufacturer’s official website. Run the file and follow the instructions that appear on the screen.

Face-Wizard- click Upload new image and you can change the logo on the initial upload screen to your image. Supported formats: jpg, bmp, gif.

If for some reason the utility was unable to download new firmware, then you need to use the following method.

Firmware using Q-flash or Q-flash UEFI

First, we need to find out the model of the motherboard. You can look at the initial boot screen, or in the documentation for your computer, or on the motherboard itself (in laptops on the back of the cover) or use some program to determine the hardware or command line by typing "systeminfo"

Download the firmware for your motherboard model from the official website. The downloaded archive needs to be unpacked (the file will be 97XSFLN2.F2) and downloaded to a USB flash drive. The flash drive must first be formatted into the FAT32 or FAT16 or FAT12 file system. The Q-flash utility only works with these file systems. Insert the flash drive into USB port, open "My Computer" and right-click on the flash drive and select "Format..."

In the window that appears, set the FAT32 file system, formatting method as desired and click the "Start" button

Once the process is complete, copy the firmware file to the USB flash drive and reboot the computer. Immediately during the POST procedure, press the "End" button to enter Q-Flash. You can also enter the Q-Flash utility from BIOS Setup by pressing the F8 button

From the Q-Flash main menu, use the up, down arrows and select Update BIOS from Drive and press Enter. Next select HDD 1-0 and press Enter.

Next, select the firmware file and press Enter. The system will read the BIOS file from the flash drive and display it on the screen. When the Are you sure to update BIOS? message appears, press Enter to begin the update. When the update process is complete, press any key to return to the main menu.

Press Esc to exit Q-Flash and reboot the system. After reboot you can see new version BIOS on the initial boot screen. And finally, you need to set it in the BIOS optimal settings default. When booting, press Del to enter BIOS Setup

Select Load Optimized Defaults, confirm your choice and exit, saving the settings.

Similar actions with Q-flash UEFI. It looks like the picture below.

The procedure for flashing the firmware is similar. And finally we come to the most labor-intensive process.

Flashing BIOS from DOS

To update you will need: a bootable USB flash drive with DOS files and the firmware itself. The whole procedure consists of five stages: 1) Creating a bootable USB flash drive, 2) Downloading a BIOS file from the website, 3) Booting from a bootable USB flash drive, 4) Flashing the BIOS, 5) Resetting the BIOS settings to default.

So, in order:

After downloading, unzip all files. The files in the usbdos folder will not be visible, since they are hidden, but they are there.

We prepare the flash drive. It should not contain bugs or errors. To verify this, you can check the drive by going to properties removable disk, tab service » Perform check.

Launch the HP USB Disk Storage FormatTool 2.2.3 utility. Check the boxes as shown in the picture. Folder path boot device MS-DOS we register the place where we downloaded the MS-DOS files. (for example, for me it’s drive C, the usbdos folder. And the button begin. When asked about destroying files, click Yes.

Upon completion of the process, copy the downloaded files from firmware. And without removing the flash drive from the USB port, we reboot the computer. We go into the BIOS (usually the DEL button on a computer or F2 on a laptop) and set the boot priority from a USB drive (on the Boot, V 1st Boot Device put the flash drive in first place (it can be called Removable Device or the actual name of your drive). If there is no flash drive in the list, then check the order in which your drive is listed. Hard Disk Drives, it should be the first and exit the BIOS saving the settings - F10. We should boot into DOS.

For some, it will be big news that the computer motherboard, even at the production stage, is equipped with a special micro-memory chip, onto which a special set of microprograms is written, which in its functional totality is the basic input/output system, without which startup and full-time job computers are simply impossible.

Updating the Gigabyte BIOS is an optional process. However, the main microcode that controls the working state computer system- there is software that at one unfortunate moment can suddenly stop working for one of the main reasons - a reading error RAM memory. However, everything can be fixed, and in this seemingly complex and incomprehensible process - updating the Gigabyte BIOS - the material in this article will help you, dear readers, to understand it.

Without further ado about the main software: BIOS - what are you?

If you do not delve deeply into the fundamental issues of the functioning of a conventional PC, then the purpose of the basic input/output system fits into several capacious points:

• When you turn on the computer, the BIOS microsystem starts, which subsequently initializes the process of loading the operating system (in our Windows case OS).

• The basic system performs short-term diagnostics installed components computer, if an error is detected in the parameters and settings (invalid startup script), the BIOS notifies the user about the malfunction with a special sound signal, the corresponding service message is displayed on the screen.

Naturally, in the latter case, the process of loading the operating system is temporarily stopped - the microsystem goes into emergency standby mode.

When is it necessary to update the BIOS?

In the event that the user installs new equipment, for example, a “super-duper video card” with God knows what appetites up to system resources, then an outdated version of the BIOS may not allow the “video monster” to be used at all, resulting in a black screen and several squeaks from the system speaker that are incomprehensible to the average person .

New processor SSD drive and various PCI gadgets (we’ll finish the “all possibilities” price list here) - all of this, even if it is recognized by the microsystem as known devices, in the future, with a high degree of probability (and it will be so!) will work with explicit flaws. Since new equipment uses a completely different scenario for interacting with the system than that specified in outdated version BSVV algorithm of instructions for working with computer system components.

So, updating the Gigabyte BIOS in the case of a hardware upgrade is a mandatory process, since the new microcode version is usually optimized to work with new equipment. However, there is a limit to everything - “really” old motherboards, naturally out of production long ago, become “unmaintained products”. Because of the latter, you will not find a new version of the microsystem BIOS for your “old man”. Alas, developers are already busy people!

If the BIOS firmware crashes: what to do?

Among computer scientists, the process of destruction BIOS firmware That's what they call it - it flew off! Overwrite Flash memory, on which the microcode is stored, is quite simple (if only you exclude RAM chips that are unsuitable for rewriting). In general, the older the motherboard, the more difficult it is to perform the process of rewriting the microsystem BIOS.

However, with careful study of the issue, everything can be implemented independently, and at home, with minimum set basic knowledge and complete lack of experience. The mission “Update BIOS Gigabite” is achievable! Naturally, you need to be convinced of the success of the upcoming event.

You shouldn’t be afraid of particularly “scrupulous” advisers from the Internet, about “this is fraught with...”. Provided: direct hands, a sound mind and maximum attention in the process of preparing for the BIOS update - everything ends more than well. Know that the firmware process itself takes a maximum of 10-15 seconds, and you are a winner!

The most effective methods for updating BIOS Gigabyte

Depending on the modification of the motherboard (laptop model), the methods for updating the BIOS may differ qualitatively. There are three standard ways to carry out software update System BIOS:

• Directly from under DOS, using the special software tool “Q-Flash” from the BIOS menu - you can use any storage medium: flash drive, external HDD or optical disk CD/DVD format.

• In a Windows environment, using the “@BIOS” utility.

There is another conservative method BIOS flashing microcircuits - through a programmer. However, today we will not consider this method, but will only touch on standard update tools.

Preparing for the update: step-by-step instructions

First of all, you need to find out the current BIOS version of the microsystem:

• Press the key combination “Win+R”.

• In the Run console, enter the command “msinfo32.exe”.

• In the main “System Information” window, read the information from the “BIOS Version” item.

The first part of the data usually indicates the model of the device being used, next value- microsystem version. We write down valuable information on a piece of paper and move on!

Step #2: Where to look for BIOS firmware?

Of course, only on the official technical support website, here you go - http://www.gigabyte.com/support-downloads/download-center.aspx?ck=2 .

It is recommended to download software without the “Beta” mark, which are test software, and therefore there is a possibility that some errors will appear in the operation of the equipment when downloading “test software”.

If you downloaded a file in an archive, the container must be unpacked, and only then written to a pre-formatted flash drive or a blank CD/DVD disk company file firmware.

Step No. 3: Updating from DOS using the “Q-Flash” utility

• Reboot the computer.

• Activate the “Q-Flash” tab.

• Next, select “Update from drive”.

• We indicate the storage medium on which you saved the new firmware.

• After you press the “Enter” button and agree that your choice is correct, a short process of updating the microsystem code will follow.

Attention: Do not under any circumstances interrupt the recording process, as this action can completely damage your computer. Wait for the rewrite process to complete and restart your computer.

Step #4: How to update the BIOS in a Windows environment?

If your computer does not support the update option described above, you can try to update the BIOS software using the “@BIOS” flashing utility.

• Use this link - http://www.gigabyte.ru/microsites/74.

• Once you are on official page boot - select the bootloader option that matches the configuration of your PC.

• Run the utility after closing all active programs and ending resource-intensive processes in the task manager.

• Activate the “Update BIOS from file” tab in the @BIOS application.

• Specify the path to the unpacked firmware file.

• Activate the recording process.

In just a few seconds, the BIOS update process will be completed - restart the Windows OS.

Summing up

As you can see, there is nothing complicated or “scary” in implementing the update process! However, with caution and utmost attention to the overall process of preparing and performing software upgrade operations Microsystem BIOS you will qualitatively protect yourself from unexpected errors and irreparable consequences.

Be careful and at the same time decisive in your actions. Always stay up to date with updates!

Unpleasant conflicts expressed in the frequent failure of your operating system to work correctly with a certain group of drivers, as well as a completely justified desire to increase the performance and expand the functionality of the motherboard used, can become a unique reason for your genuine interest in resolving the issue of how to update the Gigabyte BIOS. And only when you are completely confident in the advisability of carrying out such an important operation, which is flashing the microchip of the basic input/output system, and at the same time are determined to dot all the i’s, then let’s upgrade your “iron friend”...

The point is...

Now is the time to doubt modern competence a once flawless model of your motherboard from the IT industry leader, Taiwanese company GIGABYTE Technology Co. Ltd. A perfectly functional machine instantly lost its “authority” when you connected the hard drive enough large capacity or, perhaps, they purchased a new, more powerful one. As a result of the upgrade, the BIOS simply cannot manage such “advanced” equipment, since software part The code is outdated and requires practical updating. Therefore, in such a situation, the question of how Gigabyte becomes not just important, but extremely in need of a solution.

Choosing the only and trouble-free update method

Of course, flash the BSVV ( basic system input/output) of a computer can be done in a variety of ways. But it is highly not recommended to perform a knowingly incorrect update from Windows environment. This is purely the prerogative of DOS, so the operating system should not perform intermediary functions. The BIOS flash memory must be accessed directly. Only this way and no other way. However, this method of firmware requires certain knowledge, so we read, remember and, accordingly, independently practical actions We answer the question: “How to update the Gigabyte BIOS?”

Number, series, revision of the motherboard: where and what exactly to look for?

First of all, you need to have information about the modification of your motherboard. You can find this out from the documentation on your computer, but if you don’t have it, use one of the options below:

We write everything down on a separate piece of paper and plunge into the vast abyss of the Internet - download programs.

BIOS firmware Gigabyte

Knowing the model of the motherboard and the version of our BSVV, we proceed to the next preparatory stage of the software upgrade. On the manufacturer's website, download the available update for your board. This is usually a file up to 3 MB in size, so you won't have to wait long. Next you need to do bootable USB flash drive, which will contain the new firmware of your BIOS. Only after all of the above will you be able to carry out the process of “uploading” more advanced program code onto the BSVV microchip, through which the hardware of your computer is controlled.

Preparing the flash drive

Having downloaded a free utility called USB Disk Storage Format from the Internet, all you have to do is carry out some actions with the program interface, that is, configure it properly:

• To do this, in the first line we define our flash drive.
• Specify the file system: FAT32.
• In the Format option line, put a checkmark.
• Check the Create a DOS Bootable Disk option.
• In the window below we write the directory in which our firmware file is located.
• Click Start and wait for the process of creating a bootable flash drive to complete.

Now you can update the BIOS of the Gigabyte motherboard using the built-in BSVV software that needs to be debugged.

The important final stage is setup

By briefly pressing the Delete key we go to the main page
microprogram menu for managing the hardware of our electronic machine. In this case, the flash drive must be installed in the USB connector of the computer.

• To return the Gigabyte BIOS settings to default values, go to the Load Optimaized Defaults tab and press Enter. We agree to save the changes by selecting "Y".
• Press F8 and go to the bootloader menu.
• Disable the first item Keep DMI Data by selecting Disabl.
• It is recommended to save the current firmware version, so select Save Bios to Drive and perform the backup process.
• Click Update Bios from Drive and get into the directory of our flash drive.
• Press the Enter key to launch the firmware file.

Attention: while updating the BIOS, do not turn off the computer under any circumstances, as this can lead to quite serious problems!

• Upon completion of the microcode rewriting process, a window with the message Copy BIOS completed-Pass should appear on the monitor screen. Press any key.

Congratulations, the firmware is completed!

Upgrade your video card

This will probably be a small discovery for you, but the graphics module can also be subjected to high-quality software improvements or brought back to life when it is seen to be inoperative due to a crashed firmware. Question: "How to update the BIOS of a Gigabyte video card?" — needs more detailed consideration. We read about this further and understand the nuances.

• In the Support&Downloads section, select Graphics card.
• In the By Chipset Series window we find our modification of the graphics card.
• Then specify the Mode Name. Click on the Search button.
• Go to the section of the specified video card.
• Go to the Support&Downloads tab again. Where in the Download type window you need to select BIOS, after which in a new window you will be presented with the versions of available updates.
• We download the graphical BIOS from the server and run it in the Windows environment.

Attention: the downloaded version should not be underestimated and should express the correspondence of the symbolic and digital value with a tendency to increase by one unit. That is, the F2 firmware is replaced by F3, and F11 by F12... But in no case: F2 by F11 or F4 by F12! Gigabyte, you already know, now let's take the next step, which will help you upgrade your video card.

Small but remote

Nevertheless, VGA interface Tools@BIOS has the option to save the current BIOS version. Despite its miniature size, the utility copes with its assigned task with a bang.

• Using the Backup VGA BIOS button we do
• Flash key we find our firmware file and mount it into the bootloader.
• Click "OK" and after rewriting the BIOS, we will enjoy new features and more efficient work our video card.

In conclusion

To date, no program for updating Gigabyte BIOS can compare with the functional correctness of the built-in ones provided by the manufacturer software. Such an important process as rewriting BSVV flash memory in a standard way, requires only two things from the user: utmost attention and uninterruptible power supply. The system will handle the rest on its own. Happy upgrades!