iPhone repair: white screen is on. White screen of death on iPhone - what to do

Many people want to understand why the iPhone sometimes has a white screen when turned on:

1. What causes the display on an iPhone to turn white?

2. What is the best way to overcome this malfunction: do it personally or entrust the gadget to service technicians?

3. Video with tips for repairing a smartphone.

You will find here useful information. Here you can also read about diagnostics, self-repair, and the like.

To restore the device's functionality, you need to know:

TOP reasons why the iPhone screen is white

Screen controller is faulty

The screen controller fails due to external factors(from shocks, moisture and voltage surges), and due to internal malfunctions.

Screen controller 1600 rub. + installation 499 rub. - from 1 hour

The screen connector has come loose from the connector on the board

Most often, the screen connector comes off the board after impacts or other external influences. In this case, the screen does not work at all or does not function correctly. The device needs to be rebuilt.

Overhaul of the device - 900 rubles. - from 20 minutes

Also responsible for the operation of the screen

The power microcircuit, processor, network processor and connections to these microcircuits affect the operation of the device. Their failure causes extensive damage to the device.

Diagnostics required - 0 rub. - from 20 minutes. Upon completion, we will indicate the cost of repairs.

Moisture or strong impact

Any malfunction may occur, since moisture and mechanical damage affect the entire device.

Diagnostics required - 0 rub. - from 20 minutes.

After that we will inform you about the cost.

In order to find out why this problem occurred, you need to full check make the device. In the section you will find instructions for performing diagnostics. After identifying the cause of the problem, move on to another stage of repair.

Video instructions for troubleshooting

There is step by step video, after which you will understand how to fix a breakdown quickly and easily for little money.

You can watch the rest of the videos in the section quality control

After getting acquainted with the list of damages, watching video instructions, diagnostics, we will talk about practical ways to overcome the problem. You have two ways to repair your smartphone:

1st - repair it in the center with the help of our craftsmen, and then check its working condition;

2nd – do the repairs yourself at home. It is advisable to repair your phone after reading the instructions and weighing the pros and cons. Spare parts and special tools can be purchased at the service store.

Troubleshooting at a service center

1. When turned on, the white screen of the iPhone indicates that the display itself has failed. In order to accurately determine the malfunction, it will be necessary to carry out full diagnostics devices. Only based on its results can we draw any conclusions - completely replace the part or possibly repair the iPhone. In our service center this service carried out in the shortest possible time and absolutely free of charge;

2. The white screen of iPhone 6, 6 Plus, 5, 5S, 5C, 4, 4S indicates that the screen control chip has failed. It will need to be replaced;

3. if liquid gets into the device, then there will be nothing strange in the fact that a white screen appears on the iPhone 4, 4S, 5. In order to determine what the problem is, it will be necessary to carry out diagnostics, since the display may be damaged, microcircuit or cable, or itself PCB. You will not be able to find out the reason on your own, since this will require special equipment;

4. The iPhone fell and a white screen appeared. This is a fairly common case. The consequences can be very different. The screen itself, the printed circuit board or its components, or the cable may be damaged. In any case, it will be necessary to diagnose the cell phone in order to find out what the problem is;

5. In rare cases, problems may arise such as, for example, the screen cable has partially come off the printed circuit board connector or there is poor contact between them.

This is not the entire list of faults; there are many more. Only a qualified specialist can find out and fix the problem.

Conclusion. What to do and is it possible to fix it yourself?

As you can see, before you begin the repair itself, you need to find out the reason why your Apple smartphone stops functioning normally. There is nothing you can do at home; moreover, in this way you can only cause even more damage. Therefore, we recommend that you seek help from our service center, where only professionals work. If iPhone 6, 6+, 5, 5S, 5C, 4, 4S fails, come to our workshop.

Our advantages:

1. we have a huge warehouse original spare parts, and we sell them throughout Russia, so the prices for parts are the lowest;

2. Upon completion of the repair, the technicians will definitely conduct testing in order to make sure that the device functions perfectly. If any defects are found, we will eliminate them quickly and efficiently. This operation will take very little time - only from 5 to 30 minutes;

3. For any repair, we issue a guarantee for the entire device (this applies to all iPhone models), and not just for the replaced part.

Example from life:

The young man dropped his phone, after which a white iPhone screen appeared. He decided to go to our workshop for help, where first of all the technicians diagnosed the phone and found out that as a result of the fall, the circuit board was severely damaged. We replaced this component with a new one as soon as possible. In just 20 minutes, specialists tested the iPhone and were convinced that it functions perfectly. At the end of all procedures, we issued the client a complete guarantee for the entire cell phone.

Let’s be happy right away, despite the fact that such a malfunction is called the white screen of death, the iPhone has a chance to survive and most likely you won’t have to throw the device away.

So. Most often, a white screen occurs after the device has been dropped or wet. The reason in such cases is internal damage: some microcircuit has failed, a contact has come loose, etc. But sometimes the problem lies in the system...

Option #1. Blame the software

This is the option with the least losses. If the white screen appears as a result of a system failure, just restart the device and the problem will disappear. You can reboot in various ways, the two most popular are:

1. press Home and Power simultaneously or
2. Press sequentially Home - Volume Up - Power.

Option #2. The hardware is to blame

If you can’t remove the white screen by rebooting or restoring, it means something is broken in your iPhone. It can break:

• display,
• train,
• microcircuit responsible for touch control.

You can diagnose the problem yourself. Ask someone to call you: if the call goes through and you can even accept it by swiping the screen where the slider is, it means either the display contact has come off or the display itself is broken. If you can't call or can't answer, then there's a problem with the sensor.

In these cases, you cannot fix the problem yourself. This requires special knowledge and appropriate spare parts. Contact iService and the wizard will return the gadget to working condition.

To date Apple company is still a trendsetter in mobile fashion and invariably continues to surprise its fans with new technical developments in the field of electronic devices.

Nothing lasts forever, or the path to perfection

Despite the quality and high performance of Apple products, there are still some happy iPhone owners Sometimes they contact service centers. White screen smartphone is one of the main reasons to seek the help of microelectronics specialists. Ergonomic design iPhone smartphone 3G is still unprotected from standard situations, primarily associated with a fall on a hard surface and exposure to water. Let's figure out what is the main reason for the sometimes unexpected situation when the white iPhone screen hides the realism of the pristine color palette?

A white screen can tell a lot!

To understand why your favorite phone decided it was perfect for its 3.5-inch display, it's worth paying close attention to how it displays that symbolically innocent color. By performing some simple diagnostics, you can easily answer the question of why your iPhone 3G has a white screen.

So, the main ones typical faults and the reasons for the appearance:

What to do, because there is so much there?!

Don't shout "Guard!" Chances are, you've synced your phone with your PC many times. Connect your smartphone to your computer and try to copy valuable information. If your attempt is unsuccessful, do not worry ahead of time; the service center will definitely help you. Moreover, the replacement of the display and the accompanying iPhone diagnostics With such symptoms, malfunctions are extremely necessary.

You should always remember: if water or its derivatives get in, you should immediately contact a specialized workshop. Because liquid is the worst enemy and an incredibly serious threat to your smartphone. Delay in visiting the service center is guaranteed to create additional problems. Therefore, you should always listen to wise advice!

What to do if White screen on iPhone 6 when turned on lights up? Why does it light up? White screen and bar on iPhone 6? DIY instructions and repairs will help correct the situation, but it is better to trust the experienced employees of the Telemama service center.

Instructions: The problem under analysis may have several possible breakdowns, and they will have to be eliminated in different ways.

1. If you recently reflashed your communicator, then most likely this is what caused the incorrect behavior of the communication device. There may have been a failure with the firmware; to fix it, you will have to re-install the licensed firmware;
2. Presumably, the screen itself has failed - it will have to be urgently replaced with a new original analogue;
3. If a shock, fall, or liquid penetration into the gadget caused the first glitches of your iPhone 6, then the circuit board is presumably faulty. Her condition can be assessed after computer diagnostics.

Result: The first and second options can still be done at home yourself, but if you have the 3rd option, then it can only be eliminated at a service center.

You were immediately offered 2 options for solving the problem - choose which one suits you best.

DIY repair

Our advantages

1. We offer only high-quality and 100% original spare parts.
2. Price. Since we order parts in huge bulk, we then offer them to you at the lowest price.
3. Repair time. Replacing displays, speakers, and connectors takes an average of 20 minutes. Diagnostics will take the same amount of time (it is needed in the presence of complex faults).
4. 1 year warranty.

If your communicator is broken and a white screen appears when you turn it on, then the employees of our Telemama service center will help you troubleshoot problems that you cannot handle on your own. Courier service will assist with delivery. You can also take the device to the specialists yourself.

We provide preliminary diagnostics of equipment absolutely free of charge. Next, we agree on the cost of the work with the client and immediately begin its implementation. We definitely connect factory components for replacement. Experienced engineers guarantee a positive outcome of their efforts.

After repairing your iPhone 6, come to the service center to pick it up yourself or entrust the courier with transporting the device. You will certainly receive a 1-year warranty card. After that, both you and your friends will be serviced by us at a discount. To do this, you only need to provide your order number.

We already for a long time We repair and sell spare parts for iPhone gadgets 6, we also provide advice on self-repair of this equipment. Prices for all services and components are indicated in the price list.

You can only computer diagnostics do it in a service center, determine why the screen is white when you turn it on, then purchase the same parts from us and connect them yourself at home.

Regular customers do not expect discounts, since they are served daily at minimal rates.

Promotions allow you to save significantly - follow their terms and you will be able to repair your iPhone 6 at cost with a one-year warranty.

iPhone screen suddenly turns black or white? Similar errors occur as a result of physical damage to the smartphone: after a fall or impact. A black or white screen indicates a serious problem or that operating system out of order.

A white (black) screen appears

Method 1. Most often, a white screen on iPhone occurs as a result of software problem. White indicates a working display, but a faulty software shell. The first thing to do is press and hold the Home and Power keys at the same time. This is how you run forced reboot phone and fix the system error that appears. The smartphone will reboot and work normally.

Method 2. If the first solution does not help, you should roll back the iPhone to factory settings. In most cases, this method helps to restore the functionality of the gadget. If it does not produce results, we can say that the display, sensor, cable or other hardware component that affects the operation of the screen is faulty.

To reset settings, follow the instructions:

• Press the “Power” and “Volume Up” keys;
• Do not release them for 20-25 seconds until the Apple logo appears on the screen;
• The phone will reboot several times and return to normal;
• Sign in to your Apple ID and restore your data using a backup.

Please note that the appearance of a white screen often provokes one specific application. It may have been recently installed game With a large number graphics requirements or application that loads the system. Removing such software can prevent further appearance of the white screen.

If the methods described above did not help to restore the device, the iPhone’s black screen (or white) is the result of one of the following breakdowns:

• The contact that connects the LCD chip and the motherboard has stopped working;
• LCD chip is broken;
• Digitizer (the chip responsible for recognizing user touches) does not work.

Even if there is no visible damage to the screen in the form of cracks, it is still recommended to replace it. Most often, to normalize operation, two parts are replaced at once: LCD and Digitizer. Since they are located on the same display module, the use of two new components minimizes the occurrence of errors.

Digitizer location:

What will be needed for repairs?

For users who want to replace broken components themselves, you must first become familiar with the assembly features of your iPhone models. To do this, you can purchase a magnetic map of the location of all parts and screws. With such a small device, you will never lose any loose parts and will know exactly how to assemble the device correctly. You will also need the following tools:

• A set of screwdrivers for your iPhone model;
• Suction cup for detaching the display;
• Spudger for disconnecting loops;
• Tweezers for accurate installation of parts;
• New digitizer and LCD panel.

Remember, if the black/white screen on your iPhone appears as a result of a fall, check other hardware components of the phone. Often, as a result of an impact, not only the sensor is damaged, but also the cables, motherboard, camera and the integrity of the display itself or back cover devices. After repair and assembly, make sure that the battery is connected to the cable and only then start the smartphone.