• Router d link dir 300 does not connect to the Internet. Two main rules. Basic router settings

    Let's talk about how to configure the DIR-300 or DIR-300NRU router again. This time this instruction will not be tied to a specific provider (however, information will be given on the connection types of the main ones), we will rather talk about general principles settings this router for any provider - in such a way that if you can independently set up an Internet connection on your computer, then you can set up this router.

    See also:

    Diverse router DIR-300

    Wireless routers (or Wi-Fi routers, which is the same thing) D-Link DIR-300 and DIR-300NRU are already available for a long time and the device purchased two years ago is not the same router that is now sold in the store. At the same time, there may not be any external differences. Routers differ in their hardware revision, which can be found on the sticker on the back, in the line H/W ver. B1 (example for hardware revision B1). The following options exist:

    • DIR-300NRU B1, B2, B3 are no longer on sale, a million instructions have already been written about setting them up, and if you come across such a router, you will find a way to set it up on the Internet.
    • DIR-300NRU B5, B6 - the next modification, relevant for at the moment, this guide is suitable for setting it up.
    • DIR-300NRU B7 is the only version of this router that has significant external differences from other revisions. These instructions are suitable for setting it up.
    • DIR-300 A/C1 - the latest version of wireless D-Link router DIR-300 is currently the most commonly found in stores today. Unfortunately, it is subject to various “glitches”; the configuration methods described here are suitable for this revision. Note: to flash this version of the router, use the instructions

    Before setting up your router

    Before connecting the router and starting to configure it, I recommend doing several operations. It is worth noting that they are applicable only if you will configure the router from a computer or laptop to which you can connect the router with a network cable. The router can be configured even if you do not have a computer - using a tablet or smartphone, but in this case the operations described in this section are not applicable.

    Downloading new D-Link DIR-300 firmware

    The first thing to do is download the file latest version firmware for your router model. Yes, we will do the installation during the process new firmware on D-Link DIR-300 - don’t be alarmed, this is not a difficult task at all. How to download firmware:

    1. Go to the official d-link download site at: ftp.dlink.ru, you will see the folder structure.
    2. Depending on your router model, go to the folder: pub - router - DIR-300NRU (DIR-300A_C1 for A/C1) - Firmware. This folder will contain one single file with the extension .bin. This is the file latest firmware for the existing revision DIR-300/DIR-300NRU.
    3. Download this file to your computer and remember exactly where you downloaded it.

    Checking LAN settings on your computer

    The second step you should take is to look into the connection settings via local network on your computer. To do this:

    • In Windows 7 and Windows 8, go to Control Panel - Network and Sharing Center - Change adapter settings (in the menu on the right) - right-click on the "Local Area Connection" icon and click "Properties", go to the third item.
    • In Windows XP, go to Control Panel - Network connections, right-click on the “Local Area Connection” icon, click “Properties” in context menu, go to the next step.
    • In the window that appears, in the list of components used by the connection, select “Internet Protocol Version 4 TCP/IPv4” and click the “Properties” button.
    • Make sure that the connection settings are set to “Obtain an IP address automatically” and “Obtain DNS server addresses automatically.” If this is not the case, then install required parameters. It should be noted that if your provider (for example, Interzet) uses a “Static IP” connection type, and all fields in this window are filled with values ​​(IP address, subnet mask, default gateway and DNS), then write down these values ​​somewhere, they will come in handy later.

    How to connect a router for setup

    Although the connection issue D-Link router DIR-300 for a computer seems to be elementary, I think it’s worth mentioning this point separately. There is at least one reason for this - I have witnessed more than once how people who were visited by Rostelecom employees to install a TV set-top box had their connection implemented “via wire” - so that everything supposedly worked (TV + Internet on one computer) and did not require any action from the employee. As a result, when a person tried to connect from any device via Wi-Fi, it turned out to be impossible.

    The picture shows how to properly connect the router to a computer. You need to connect the provider's cable to the Internet (WAN) port, and plug a wire into one of the LAN ports (preferably LAN1), the other end of which will connect to the corresponding port of the network card of the computer from which the DIR-300 will be configured.

    Plug the router into a power outlet. And: do not connect your Internet connection to the computer itself during the entire process of flashing and setting up the router, and also after that. Those. If you have some kind of Beeline, Rostelecom, TTK, Aist-online program or anything else that you use to access the Internet, forget about them. Otherwise, then you will be surprised and ask the question: “I have set everything up, there is Internet on the computer, but on the laptop it shows without access to the Internet, what should I do?”

    Firmware D-Link DIR-300

    The router is connected and plugged in. Launch any of your favorite browsers and enter address bar: 192.168.0.1 and press Enter. A window will appear asking for your login and password. The standard login and password for the DIR-300 router are admin and admin, respectively. If for some reason they do not work, reset the router to factory settings by pressing and holding for about 20 seconds reset button on the back side, then go back to 192.168.0.1.

    After entering your login and password correctly, you will be prompted to set New Password. You can do it. Then you will find yourself on the main router settings page, which may look like this:

    In order to flash the DIR-300 router with new firmware in the first case, perform the following operations:

    1. Click "Manually configure"
    2. Select the “System” tab, in it - “Software Update”
    3. Click “Browse” and specify the path to the file that we downloaded when preparing to configure the router.
    4. Click Update.

    Wait for the firmware process to complete. It should be noted here that it may feel like “Everything is frozen,” and the browser may also display an error message. Don’t be alarmed - be sure to wait 5 minutes, unplug the router, turn it on again, wait a minute for it to boot, go to 192.168.0.1 again - most likely, the firmware has been successfully updated and you can proceed to the next setup step.

    In the second case, the firmware of the D-Link DIR-300 router occurs as follows:

    1. At the bottom of the settings page, select "Advanced settings"
    2. On the “System” tab, click the right arrow shown there and select “Software Update”.
    3. On new page Click “Browse” and specify the path to the new firmware file, then click “Update” and wait for the process to complete.

    Just in case, I remind you: if during the firmware process the progress bar “runs endlessly”, it seems that everything is frozen or the browser shows an error, do not unplug the router from the outlet and do not take any other actions for 5 minutes. After that, just go to 192.168.0.1 again - you will see that the firmware has been updated and everything is in order, you can move on to the next step.

    D-Link DIR-300 - setting up an Internet connection

    The very idea of ​​configuring a router is for the router to independently establish a connection to the Internet, and then distribute it to all connected devices. Thus, setting up the connection is the main step when setting up the DIR-300 and any other router.

    In order to set up a connection, you need to know what type of connection your provider uses. This information can always be found on its official website. Here is information for the most popular providers in Russia:

    • Beeline, Corbina - L2TP, VPN server address tp.internet.beeline.ru - see also: ,
    • Rostelecom - PPPoE - see also
    • Stork - PPTP, VPN server address server.avtograd.ru, the setup has a number of features, see.
    • TTK - PPPoE - see.
    • Dom.ru - PPPoE -
    • Interzet - Static IP (Static IP address), more details -
    • Online - Dynamic IP (Dynamic IP address)

    If you have any other provider, then the essence of setting up the D-Link DIR-300 router will not change. Here's what you need to do (general for any provider):

    1. On the settings page Wi-Fi router click "Advanced Settings"
    2. On the “Network” tab, click “WAN”
    3. Click "Add" (ignore that one connection, Dynamic IP, is already present)
    4. On next page indicate the connection type of your provider and fill in the remaining fields. For PPPoE - login and password to access the Internet, for L2TP and PPTP - login, password and address VPN servers, for the “Static IP” connection type - IP address, default gateway and address DNS servers. In the vast majority of cases, the remaining fields do not need to be touched. Click the "Save" button.
    5. The page with the list of connections will open again, where the connection you just created will be displayed. There will also be an indicator at the top right indicating that you need to save the changes. Do it.
    6. You will see that your connection is disconnected. Refresh the page. Most likely, if all connection parameters were set correctly, after the update it will be in the “connected” state, and the Internet will be accessible from this computer.

    The next step is to configure the wireless network settings on the D-Link DIR-300.

    How to set up a wireless network and set a password for Wi-Fi

    In order to distinguish your wireless network from others in the house, and also protect it from unauthorized access, you should make some settings:

    1. On the D-Link DIR-300 settings page, click "Advanced Settings" and on the "Wi-Fi" tab select "Basic Settings"
    2. On the basic wireless network settings page, you can specify the name of your network SSID, specifying something different from the standard DIR-300. This will help you distinguish your network from your neighbors. In most cases, other settings do not need to be changed. Save the settings and return to the previous page.
    3. Select settings Wi-Fi security. On this page you can set a password for Wi-Fi so that no one else can use the Internet at your expense or gain access to computers on your network. It is recommended to specify “WPA2-PSK” in the “Network Authentication” field; in the “Password” field, enter the desired password for the wireless network, consisting of at least 8 characters. Save your settings.

    This completes the wireless network setup. Now, to connect to Wi-Fi from a laptop, tablet or smartphone, you just need to find the network with the name you previously specified from this device, enter the specified password and connect. Then use the Internet, classmates, contacts and anything else wirelessly.

    D-Link DIR-300 is one of the most popular models routers used to create a home wireless network. Before you start D-Link settings DIR-300, it must be connected correctly. This process is not complicated, but sometimes it confuses users. Incorrect connection leads to incorrect operation router, up to the impossibility of creating a wireless Wi-Fi networks.

    Note: The information provided on how to configure the D-Link DIR-300 is general information, applicable for any provider.

    Connection

    Please note back panel router. If it's a D-Link DIR-300, you'll see 4 LAN ports and one WAN connector, as well as a power adapter slot. The WAN port is intended for connecting a wire from your provider, but leave it free for now - you will need the Internet on your computer.

    The router comes with a patch cord, which is necessary for the initial connection of the router to the computer. Insert one end of it into any LAN port, and connect the other end to the computer’s network card.

    Working with the web interface

    Now you can configure the D-Link DIR-300.

    Open a browser on your computer and enter the address 192.168.0.1.

    This is a single address for all D-Link routers, allowing you to access their web interface. You will need a login and password, which by default is the word “admin” (without quotes). If the password is changed for some reason, reset the router settings to factory settings by pressing the “Reset” button on the case.

    This step is optional, but it will be useful to complete the router as correctly as possible. Once on home page web interface, you will see information about your router. Here you can see its firmware version.

    To download updated version firmware, go to ftp://dlink.ru/pub/Router/. Here you will see a catalog of devices from D-Link, in which you need to find your router model - DIR-300. In the “Firmware” folder, find the file with the .bin extension and save it to your computer.

    Then return to the router's web interface. Click on the firmware version to go to the System tab. Here you will be asked to select the path to the saved .bin file. Open it and wait a bit - the D-Link DIR-300 will reboot.

    Internet connection

    Before setting up the D-Link DIR-300 as a Wi-Fi point, you need to establish a connection between the router and the Internet. You will need information about what type of connection the provider providing your communication services uses. This information can be found in the contract, found on the website, or asked from technical support.

    It doesn’t matter which provider provides communication services, the setup principle does not change.

    You can configure the D-Link DIR-300 using the following steps:


    IN top menu An indicator will appear on the left asking you to save your changes again. Take advantage of it. If the connection is lost, refresh the page. All that remains is to configure Wi-Fi directly on the D-Link DIR-300.

    Wireless network

    To configure Wi-Fi, you must select “Basic settings” in the corresponding menu of the web interface.

    Here you can specify the name of the wireless network to make it easier to then find it in the list of available ones for connection. The remaining settings do not need to be changed unless the provider specifies otherwise in the contract. Typically, the default settings allow you to create a wireless network correctly.

    After saving the changes, go back. In the “Wi-Fi” tab of the interface D-Link devices DIR-300 go to “Security Settings”. Here you can protect your network with a password.

    In the “Network Authentication” line, set the “WPA2-PSK” parameter. The "encryption key" is the password that you will then need to connect to Wi-Fi. Make it up of eight characters and remember it. The wireless network setup is complete. Now you can connect to Wi-Fi hotspot, using the password specified during setup.

    How to connect the DIR 300 router?



    By connecting the DIR 300 router to a broadband modem or a dedicated line, you can fully use all the features high-speed access to the network anywhere in your apartment. But first you need to figure out how to connect the dir 300 router.

    The article below lists the basic steps for connecting and setting up such a router

    Connection and setup

    1. First, the router needs to be connected to the computer;
    2. Connect power to the router;
    3. Connect network cable to the WAN port on the back of the router;
    4. Connect one end of the patch cord to the LAN port, and the other to the computer's network card connector;
    5. Configure the network card. You should have it specified in your settings following values: IP -192.168.0.101, subnet mask - 255.255.255.0, default gateway - 192.168.0.1.

    The router's network settings are configured in two ways, examples of which are given below.

    Easy installation with D-Link Quick Router Setup Wizard

    This method is the most convenient and intuitive for the user. You will need to download the Quick Setup Wizard onto your computer and follow its instructions step by step to configure your network settings. Even if you have never configured a router before, this program will explain to you in detail all the steps, starting with connecting the cable to the network card. If you know some steps, you can easily skip them with one click. However, the Master quick installation will only allow you to configure basic parameters networks. If you want to get more familiar with the advanced settings, you are better off using the web interface.

    Adding router settings yourself

    Perform the following algorithm of actions to manual installation network parameters:

    1. Type 192.168.0.1 in your browser and press Enter. A settings window will open in front of you;
    2. The login and password fields remain empty by default (you can later set your own values);
    3. Find the Setup button and go to the Internet Setup tab;
    4. Specify dynamic IP (DHCP) in the connection type term;
    5. Specify the MAC address - a unique identifier that is assigned to any piece of equipment on data networks. It can be obtained automatically by clicking the Clone button MAC Address;
    6. Enter the values ​​of the primary (Primary DNS Address) and alternative (Secondary DNS Address) DNS server. To find out, you need to contact your provider;
    7. By checking the Enable Access Point Mode checkbox, you can turn your router into wireless point access to which only one device can connect;
    8. Save your changes (Click Save Settings).

    What is this Wi-fi for? This is the question that is probably the stupidest thing related to the Internet right now. It so happens that our computer and digital technologies are developing at incredible speed. For example, the most popular products now are: smartphones, tablets and laptops.

    In all these devices, as a rule, an adapter is already installed on WI-FI reception signal that allows you to use wireless Internet in all corners of your home. Some people just want to get rid of long and unnecessary cords throughout all the rooms, which in the future will simply fall under their feet. A Wi-Fi router that will distribute the Internet signal throughout the house will help us solve both situations.

    But buying the router itself and unpacking it and putting it on a shelf is not all. You also need to connect a cable to the Internet and configure the device itself to receive and distribute the signal. Right now I will show you in detail how to set up a Dlink Dir 300 wifi router. If you have a different router, you can do everything in the same way, but if it’s a different one, it’s okay, setting up all routers is almost the same, there are only minor differences in the interface.

    Next, I will tell you how to correctly connect and set the settings in the D-Link DIR-300 Wi-Fi router for distribution wireless internet, and also how to install a key on a Wi-Fi network, which would protect your connection from freebies.

    Connecting the D-Link DIR-300 router

    1. Opening the box you should find the following contents:

    • The Wi-Fi router itself;
    • Power cord;
    • 1.5 m patch cable;
    • Installation disk with drivers;
    • Operation manual;
    • Warranty card;

    If this entire set is present, then take the router, the cord for connecting to the outlet and the patch cord, and move on to the next step.

    2. So, you can place the device anywhere, as long as there is access to an outlet and the Internet cord can reach it. If you use a cable with standard, then of course you will have to place it near the computer. But, in the future, you can buy a long cable on the radio market, in specialized stores, or crimp the cable yourself for further movement around the house.

    Let's first look at all the router connectors that are located on the back side:

    1. Reboot or reset router settings button;
    2. Power connector;
    3. Input for connecting an Internet cable;
    4. Four LAN ports for local connection computer.

    A fully connected device should look like this: first, connect the power supply to the router, then to the port called “ Internet" (V On other routers it may be called WAN or be painted in some color different from the four LAN ports), connect the cable to the Internet from the provider and finally power cord which you found included with the router, we plug it into any of the LAN ports, and the other side into the computer.

    Everything is ready, the device is connected and ready for configuration.

    Setting up WiFi router D-Link DIR-300

    1. To start setting up the D-Link DIR-300 router, we need to go to its interface; to do this, in any Internet browser we enter one of the following IP addresses 192.168.1.1 or 192.168.0.1. The router interface will open where to start the robots you need to enter the username and password, immediately try the standard ones: admin, admin. By pressing “Enter” its settings should open.

    Network address and data according to standard account You can find it on a sticker located on one of the sides of the router or, read step by step instructions about how to get into its interface. If you've tried everything possible options spilled and you just can’t get into the settings menu, most likely you’ll have to return the router to the original settings.

    2. At the very beginning let's change standard password“admin” to a more secure one so that no one can hack it. To do this, select “ System» –> « Administrator password" In the field with the user name, select “ admin" and indicate your preferred password. I recommend using passwords of more than 8 characters with capital letters and always numbers.

    After entering the password, double-click on the “Save” button to change the standard password.

    Setting up the Internet in the D-Link DIR-300 WiFi router

    To set up the Internet in the D-Link DIR-300 router, you need to go to “ Net", and then " Compound" and here select the connection called " WAN", clicking on it with the left mouse button.

    In the next window you need to check all the boxes as indicated below. In the field " MAC» leave the MAC address set by default, if the company that provides you with Internet services uses binding by MAC addresses, then Most likely you will have to copy the physical address of your computer into this field.

    Setting up a Wi-Fi network and its security on the D-Link DIR-300 router

    1. By going to the tab " WiFi"click on " Basic settings" Here we give the name of the Wi-Fi network by writing it in the “ SSID» and indicate the region in which you are currently located.

    To save the settings, click " Change».

    So, in the field " Network authentication» choose next type protection " WPA2-PSK" In the line " PSK encryption key"Enter the password that will be used in the future when connecting to Wi-Fi. The recommendations are the same: use capital and small letters with numbers. In settings WPA encryption, specify the following type “TKIP”.

    Again, to save, click “ Change».

    Completing the setup of the D-Link DIR-300 Wi-Fi router

    Having saved all the parameters, we will need to do this again and restart the router. Moving to the upper right corner, point to the word “ System"In the drop-down window, select "".

    After rebooting the device, we can say with confidence that the setting home router D-Link DIR-300 is finished. As you can see, there is nothing complicated and I’m just sure that you can easily cope with it. I’ll tell you even more that the technicians who come to the call to configure the router do all the same actions that I described above. So, read everything carefully and you will be able to save money on calling a specialist.

    Good day, dear blog readers, in today’s article we will talk about how to set up a D Link Dir 300 router. After all, it is rarely possible to distribute Wi-Fi from the device the first time. First things first

    IN this review The description of the Wi-Fi device will be discussed in detail D-Link DIR-300, the main nuances of its settings. In addition, the installation and connection of the device, its firmware, characteristics, methods for setting up a connection to Internet resources, and connection options used by providers will be described in detail. You can learn about adjusting the wireless network for access, installing wi-fi password, connection of various equipment.

    Using the DIR-300 device, you can quickly create a wireless network in your office or home, to which the Internet can be connected via a special line, distributing it over Wi-Fi.

    Modern DIR-300 equipment can distribute ADSL Internet, but it cannot be connected directly to a telephone line. In this case, you will need to connect it to a DSL modem with telephone line. A similar connection diagram is used if there is simple modem without, from which you need to make a wireless network. However, if any Wi-Fi device fails, the network remains without the Internet or the network without Wi-Fi. Therefore, to fulfill all needs you need to have one device.

    Device overview

    D-Link DIR-300 has a four-port switch for connecting a laptop via Ethernet adapters. The router can create wireless access Wi-Fi network standard 802.11b/g. The device can operate in access point, bridge or client mode. There are also many options: filtering by MAC address, maintaining security standards (WEP, IEEE 802.1X, WPA/WPA2). Security options block access to unwanted resources.

    The router has firewall, buttons, indicators and connectors. On the front panel there is an indicator for power, internet, local network and Wi-Fi. When the option is enabled, the buttons light up green. The rear panel has an antenna, a power connector, a RESET key, 4 ports for a wired connection to a wireless network, a port for connecting a DSL modem or via an Ethernet line.

    On the side there is a button for quickly adding a device to the Wi-Fi network. There is an indicator on the WPS button, blue flashing indicates a connection attempt, and blue light indicates a connection attempt. established connection, yellow light – error connecting to the wireless network. The device is controlled via a web interface.

    Manipulations before adjusting the device

    Before connecting the router for further configuration, it is advisable to download the firmware file for a hardware revision. There are several versions of DIR-300 devices:

    • NRU B5/B6,
    • NRU B7,
    • A/C1.

    Each has individual firmware. The revision is reflected on a sticker located on the back of the device. You can download the firmware on your personal resource, click the buttons pub, router, device modification, then “Firmware” and hardware revision. The selected folder will contain old and new firmware.

    Also before further work you need to reset the settings. There are two ways to do this:

    1. Key Reset(on the back side), which you need to press for half a minute, release and wait for the device to reboot with adjustments from the manufacturer.
    2. Connection via Internet browser. Dial the address 192.168.0.1 , login " admin", go to the "Tools" page ("System/Configuration"), click on the "Reset to Default" and "OK" buttons.

    To get to the settings control panel, in the properties of the local network connection you need to specify automatic acquisition of an IP address and automated acquisition of the DNS server address.

    Installation and connection instructions for D Link Dir 300

    To place the device, you should choose a suitable location, but do not install it in utility rooms (closets, attics), since the presence of walls reduces the network coverage area.

    Connecting the router is not particularly difficult.

    • The Internet provider cable is connected to the port network card connects to the LAN port of the router via the RJ-45 cable included in the package.
    • Next, turn on the power and boot the router, checking the settings on the local network.
    • You need to go to Start, Control Panel and click on the “Network and Internet” section, in the “Network and Sharing Center” public access"You need to click on "Change adapter settings."
    • In the window, select the network, which you need to right-click on and go to properties.
    • You should select the version 4 protocol and click properties. In the window that appears, you should check whether there is an automated method for obtaining a DNS server and IP address.

    Adjusting the device connection

    The essence of setting up the device is that it initializes the Internet connection and distribution to other connected devices. Setting up the connection is carried out in the interface and is a necessary operation.

    Let's move on to setting up the connection. On the main page of router settings, at the bottom, you need to click on “advanced settings” and in the “network” tab, select “WAN”, click on the “add” button, where the connection with a dynamic IP address will be reflected.

    On next stage you need to correctly compose the fields in accordance with the type of connection used for each provider individually:

    • Beeline (beeline) – Dynamic IP with L2TP;
    • Online – Dynamic IP address;
    • Stork – Dynamic IP address with PPTP;
    • Dom.ru, Domolink and Rostelecom - RRPoE;
    • Interzet – IP static.

    Information about the connection used can be found on the web resource of the official provider or study the properties of the connection used to obtain Internet access. In many situations, in addition to the connection type, it is necessary to fill out a login and password received by the user from the service provider, including the VPN server address for providers using L2TP or PPTP connection.

    Next, press the save key and the page with the created connection opens. Also at the top there is an indicator that reflects changes in the router settings and the need to save them again. It is necessary to do such actions so that after rebooting or turning off the router, all settings are not reset. The page with the list of connections should be updated.

    If the settings have been made correctly, it will light green and the Internet connection will be available. After this you can configure wireless Wi-Fi net.

    Wi-Fi access settings

    To set up a wireless network, you need to go to the advanced router settings page and click on the basic settings link in the Wi-Fi tab. The page indicates the name of the access point SSID, on the basis of which it will be determined wireless network. Additionally, other criteria need to be changed, but often this is not necessary. At the final stage, all settings are saved.

    In the same Wi-Fi tab, select the “Security Settings” section, where you need to set a password for Wi-Fi router. To do this, select the mode in the “Network Authentication” field WPA2-PSK, enter the required password for the access point in the “PSK encryption key” and save the entered data.

    LAN settings

    Using these steps, functions over the local network will be changed and the DCHP node will be configured dynamically. To open required settings you should go to the LAN Setup section.

    In the column " Router IP Address» the router address is configured (the parameter is initially set to 192.168.0.1). Default Subnet Mask is the subnet mask, first set to 255.255.255.0. The “Local Domain Name” column is the domain name.

    Read more: