• Reset iPhone 5 settings using buttons. Resetting iPhone to factory settings

    Attention! In some cases, you cannot reset your iPhone to factory settings. Read the article to the end to be sure that after resetting the settings, the phone will not require activation. I will give the necessary instructions.

    If you decide to sell your iPhone or simply, for personal purposes, clear it of all photos, games, applications and other data and, as a result, return the smartphone to its factory settings, then the instructions in this lesson will help you!

    You can reset your iPhone to factory settings using the built-in functions of the system. To do this, find Settings on one of the screens.

    Going there we will need the Basic item.

    We see two similar reset points. One of them" Reset all settings", which is responsible for resetting the settings to factory settings, but at the same time it saves important files. And the second point " Erase content and settings", in addition to resetting the settings, it also deletes all data from the iPhone.

    The second option is most useful when selling a phone or in any other cases when you need to completely wipe the device and reset it to factory settings. Having decided on the type of reset, we click on it and in the drop-down menu click "" or " Reset all settings".

    At the end of the reset procedure, the iPhone will restart and we will be asked to perform the initial settings: select a language, go through activation, enable or disable geolocation services.

    And of course, be extremely careful! Before you reset your iPhone to factory settings, make sure there are no important files, like photos and videos! Also check if the "Find iPhone" function is enabled (go to Settings - iCloud - Find iPhone).

    With the Find My iPhone function enabled, after resetting the settings, you will need to enter your APPLE ID login and password that applies to your iCloud. If you do not have this data, then you cannot be performed full reset settings. Otherwise, you will not be able to activate the device until you enter the login and password for your APPLE ID.

    Try turning off Find My iPhone! If you succeed, then you can now safely reset your iPhone to factory settings and not be afraid that it will freeze during the activation stage.

    In addition to all of the above, just in case, before resetting the settings, I recommend using iTunes program, backup your device!

    Returning the device under warranty is a highly recommended measure when selling a used device. Secondly, what is the point of giving someone a chance to dig into your “dirty laundry”? And thirdly, elementary rule politeness - if a smartphone or tablet acquires a new owner, the latter has the right to expect to receive a “clean” gadget, similar to the “out of the box” version.

    Reset iPhone or iPad to factory settings (removing settings and personal data directly on the device)

    It doesn't matter what you have in your hands, iPhone, player iPod Touch or tablet iPad– the sequence of actions is the same for all iOS devices.

    Attention. To avoid booting your iOS device into “eternal apple” mode, this method DO NOT run on a jailbroken device (Cydia icon on home screen). Otherwise, only .

    1 . Go to the application Settings and go to the section Basic, in which (at the very bottom) the menu item is located Reset, which is what we need.

    3 . To avoid embarrassment and sabotage, iOS has an integrated mechanism for checking responsible actions - when asked for clarification, simply answer “Erase iPhone (iPad, iPod).”

    4 . iOS is persistent and does not want to return to emptiness - another dialog box may appear asking you to confirm your actions.

    5 . For those cases when the " Find iPhone", an additional identification step with entering a password will be required.

    Stop by along the way Settings –> iCloud–> and move the switch Find iPhone to position Off.

    6 . After pressing the last button, you can put the device aside - the data deletion process will take several minutes, after it is completed, the iPhone, iPad or iPod Touch will be reset to factory settings with all data deleted.

    How to reset an iPhone or iPad to factory settings using iTunes

    1 . Launch iTunes on your computer (you can download it) and connect your iOS device.

    2 . Open menu Review and press the button Restore.

    3 . When the function is active Find iPhone(iPad, iPod Touch) the system will ask you to turn it off. On your device, go to the path Settings –> iCloud–> and move the switch Find iPhone to position Off.

    4 . Return to menu Review V iTunes application and press the button again Restore.

    5 . iTunes on automatic mode will update the software to the latest version, reset settings and delete user content. Formally, the smartphone or tablet is now clean and can be transferred to another person.

    Hello! Full reset (aka - Hard Reset) is a cardinal way to solve enough large quantity problems. After this procedure, the iPhone or iPad will appear before you in its original form, as if you had just purchased it new in a store. Scratches and abrasions, of course, will not go anywhere, but for cleaning the internal software you can rest assured that iOS will be restored to the “gadget just arrived from the factory” state.

    Remember: absolutely all data is deleted from memory! So before carrying out the actions described in the article, it is highly recommended to acquire. As they say, it won’t be superfluous. Did you do it? Are you prepared? Let's go! :)

    Why do you need to perform a Hard Reset on an iOS device? There may be several options:

    • Before sale.
    • The gadget is slow, glitchy or...
    • We decided to start life again :)
    • A lot of garbage has accumulated (although in this case it is better to do this).

    In any case, catch two instructions, following which it is quite easy to completely clear the memory of your iPhone or iPad.

    How to erase all settings on iPhone or iPad using the device

    The simplest and convenient way, you can do it literally in 4 taps on the screen. Unlock your iPhone or iPad and go to settings:

    Find the line “basic” and scroll the screen to the very bottom. Click on “reset” and select what exactly we need:

    For complete and all-consuming removal, we opt for - “Erase content and settings”:

    If you have a jailbroken device, you should not clean it this way - you will end up with a frozen phone or tablet. To avoid this you should do this...

    How to do a hard reset using iTunes

    Suitable for those who have jailbreak installed. More this method can be used if you have forgotten the four-digit screen lock password and simply cannot get into the settings menu in order to use the method indicated above.

    To do this you need a computer and. You can read where to get it. Check that the latest version of the program is installed, if it is not.

    After connecting the device to the PC, in the very first window, click on restore. And just wait, everything will be done for you.

    Please note: when you return the settings to factory settings in this way, the smart machine itself will install the most current firmware. If, for some reason, you do not need this, use the first method.

    A few important notes.

    In case of incorrect iOS updates or frequent smartphone freezes, you need to know how to quickly and independently reset your iPhone to factory settings.

    This function will allow you to restore the phone's software shell and significantly.

    Contents:

    Responsible for resetting settings here Hard mode Reset. With its help, users can remove all installed data and applications.

    Also, using a reset, you can return to the original version that was installed on the smartphone by the developer.

    In Settings, the user can choose which options to reset and what information to remove from the device.

    There are a total of 6 functions for deleting data:

    In what cases is it necessary to perform a Hard Reset?

    It is important to remember that resetting the settings involves complete removal all data - from contacts to installed applications and files in the device memory.

    Once the action is completed, the information cannot be restored. Typically, recovery to initial settings is performed in the case:

    • Gadget resale. To use the smartphone by the new owner, you must clear all information from the smartphone. This is the only way to log in under a different user name;
    • The phone started to freeze frequently or it has too many installed applications, malware and other settings that are getting in the way normal operation systems;
    • Error after updating IOS. There are cases when, as a result of a server error, a new version of iOS is installed on the smartphone incorrectly and the iPhone stops turning on.

    Creating a Backup

    If you want to reset your device to factory settings, the first thing you need to do is back up your data.

    A backup is an archived version of iOS that saves the firmware version, user files, phone settings and geolocation services data.

    Exists 2 simple ways creating a backup:

    The first method involves saving backup copy V cloud storage iCloud, which is tied to the user's Apple ID.

    To create an IOS archive, go to and click on “Apple ID”. In the window that opens, find the “iCloud” field and select it.

    Activate the function slider backup. Then click on “Create a copy” and check if the Internet connection is active. The backup will be created within a few minutes. After creating the archive, you will see a message with exact time sending a copy to .

    To create a backup you need to install latest version programs on your computer, connect your smartphone to your PC and enter your Apple ID details.

    Then open iTunes and in the “Browse” tab, click on “Create a copy”, after selecting its storage location: iCloud cloud or "This computer".

    With the help of a backup, you can easily return all data deleted after resetting to factory settings. The procedure for installing a copy will take no more than 5 minutes (depending on the amount of saved data).

    Important if you are restoring an iPhone after failed update iOS, it is important that the backup copy is made before installing the new firmware version. Otherwise, the incorrect IOS will be installed on the phone again.

    How to do using iOS

    After creating a backup, you can proceed to reset the settings. The first and easiest way is to roll back to factory settings using the built-in IOS functions.

    Use this method if you can get into the phone's menu and use basic OS functions. Follow the instructions:

    • Open iPhone app menu;
    • Find the “Settings” icon and open it;
    • In the window that appears, click on “General”, scroll down the tab and click on “Reset”;

    • In the window that appears in Select the desired item to delete. You can reset settings only or . The first two points involve resetting the system, followed by rebooting it and setting it up “From Scratch”. The remaining four points indicated in the figure below are intended only for easy removal function information without turning off the smartphone.

    • After selecting the delete option at the bottom of the window A confirmation tab will appear. Twice click on the item "Erase data". This is necessary to prevent accidental system resets, since the action is irreversible;

    • Now enter your Apple ID password and press the “Erase” button. Make sure the new window shows your email address, which is also a login in the system;

    Pay attention! If the smartphone is charged less than 25%, during the recovery period it must be connected to charger. If charge iPhone end before full reboot smartphone, will happen system error , which can cause the phone to become completely inoperable.

    Recovery via iTunes

    The following method of returning to factory settings requires a computer and a pre-installed one on it, which is tied to the Apple ID of the iPhone. Follow the instructions:

    1 Connect your phone to PC and go to iTunes;

    2 Make sure that in the main window a photo of your iPhone model is displayed and go to the tab "Review";

    3 On the right side of the window, click "Restore iPhone";

    4 In a new window Confirm the action again. Then wait until the gadget reboots.

    The peculiarity of this reset method is that after deleting all data and returning to factory settings, iTunes automatically installs the latest iOS version and only then starts the smartphone. Regular option reset via phone settings returns old version firmware, and the user needs to update it independently from iTunes.


    How to do a Hard Reset (how to reset factory settings) of a smartphone Apple iPhone 5S. To do this, we suggest the following actions:

    Soft Reset

    When performing a Soft reset (soft reset, soft reset) All information in the phone will be saved.
    1. Press and hold the "Home" and "Power" buttons
    2. After about 8-10 seconds the Apple logo
    If not technical problems then the device will start in standard operating mode.

    Entering Recovery mode

    1. Press the "Home" and "Power" buttons at the same time.
    2. Don't release the buttons. First, the shutdown slider will appear, after which the screen will go dark.
    3. As the device starts to boot, release the "Power" button.
    4. After about 15 seconds, a picture of the cable will appear on the screen and iTunes icon.
    5. Release the "Home" button

    Entering DFU mode

    The purpose of the DFU (Device Firmware Update) mode is to restore the software of Apple devices. Do not confuse DFU mode with Recovery mode(recovery mode). In Recovery mode, the screen shows USB cord And iTunes icon. IN DFU mode The device appears to be turned off. To enter DFU mode, do the following:
    1. Connect your smartphone to your computer
    2. Next, hold down the "On/Off" and "Home" buttons for about 10 seconds
    3. Release the "On/Off" button, but do not release the "Home" button
    4. If the Apple logo appears, then start the whole procedure from the beginning.
    5. Hold the "Home" button until iTunes detects a new device in recovery mode (about 20-30 seconds).
    The device is now in DFU mode and can be restored to software.

    Read more: