• How long does it take to restore an iPhone via iTunes? Problems and errors when restoring iPhone to iTunes and from backup

    Restoring via iTunes is an extreme measure that the user takes if he cannot fix a particular software iPhone crash. Unfortunately, sometimes this procedure, in turn, is interrupted by an error. What to do if you can’t restore your device through iTunes? In this article we will answer the question.

    In general, there are two ways to restore an iPhone using iTunes. The first method is “light” - it assumes that your device is still functional, but, for example, it’s a little buggy, and you want to remove all the bugs using recovery. In this case, you need to connect your iPhone to your PC with installed iTunes, wait until the program recognizes the device (that the gadget has been identified will be signaled by the appearance of an icon in the form of a phone in the main menu of the program), go to the “Browse” section and click the “Restore iPhone” button.

    It's very simple, but there are worse situations. For example, you set your iPhone to update, but forgot that the charge was low and it turned off when the update was not completed, and now the smartphone refuses to respond to any actions, including, it will not turn on. Or, for example, you decided to install a program from an unverified source, but there was a virus there, which, again, turned the device into a “brick” that refused to even turn on. In such situations, is there a chance to return the smartphone to a working state?

    Don’t be alarmed, there is a way out of this situation - you just need to switch the device to one of the emergency modes - Recovery Mode or DFU. The first is activated through the platform, the second at the hardware level. That is, if Recovery Mode does not respond, DFU will always come to the rescue.

    To activate Recovery Mode, hold down the Home button, then, without releasing it, connect the device to a PC with iTunes; when the program icon and the image of the charge cable light up on the smartphone screen, release Home. At the same moment, iTunes will report that it has detected an iPhone in recovery mode and will offer to start the recovery process.

    To transfer your smartphone to DFU mode— hold down Home+Power, after 10 seconds release Power, connect the iPhone to the computer, and wait for iTunes to signal that the device has been detected in recovery mode (no icons should appear on the screen of the device itself!), then release Home and launch procedure.

    What to do if iTunes failed to restore iPhone?

    Unfortunately, sometimes for some reason reason iTunes The recovery procedure cannot be completed - it is interrupted by an error. Don't worry, this is not the end of the world; most likely, the situation can be easily corrected.

    There can be many reasons why iTunes refuses to restore a device, but most often the problem is software in nature.

    Therefore, first of all, you need to restart the program and computer, and if your iPhone is not bricked, reset it too. Perhaps after this simple step, everything will work out for you.

    Software update

    If rebooting does not help, you need to make sure there are no software conflicts - first of all, check which iTunes version installed on your computer, the program may simply need to be updated. It would also be a good idea to update all other software installed on your PC. You don't even imagine how often outdated programs become the causes of certain failures.

    You can update the software on a Windows PC by accessing the center from the Start menu. Windows updates, and on Mac you need to go to the “Updates” section of the App Store.

    Disabling security programs

    One more common reason software conflicts - too responsible job antivirus programs. Your firewall or antivirus may have listed iTunes as a suspicious program and is preventing it from working. To check if this situation is relevant in your case, disable all protective programs during recovery.

    Editing the hosts file

    And finally, another reason for software failures is errors hosts file. We won’t go into lengthy explanations about what this file is and why it is needed, this is not so important in in this case. You just need to make it correct. How? In this article on the site Apple support you can read how to find and edit a file on a Mac; this article will help you find hosts on Windows, and the editing procedure will be the same as for Mac.

    Hardware problems

    If you are unlucky and the iPhone is not restored despite the fact that you have carried out all the measures described above, then it is time to suspect a hardware problem. First of all, you need to use a different USB port to iPhone connections. If this does not help, it may be a problem with the connecting cable - note that in this case you must use either the original cable or one marked MFi, which means “Made for iPhone”.

    If everything is in order with the cable and ports and software reasons you have ruled it out, but the recovery is still interrupted, perhaps the problem is in the PC or iPhone itself. Try using another computer, if the recovery is interrupted on it too, then it’s time for you to pick up your “apple” and take it to the service.

    Let's summarize

    Using iTunes recovery, you can fix certain iPhone glitches, however sometimes it does not recover. Why can't my iPhone be restored via iTunes? There can be many reasons, both software and hardware. If you were unable to fix the problem yourself, we recommend that you first contact Apple support, and if that doesn’t help, take the device to the service center and, hopefully, they can still fix it!

    Today we have to figure out how to restore an iPhone using iTunes. This kind of task is not that difficult. Especially if you carry out the process correctly. Each owner of an Apple device will be able to return certain data to their mobile device in a few minutes. This is quite normal.

    Recovery methods

    When thinking about restoring an iPhone, the user should take into account that there are several options for the development of events. And first you will have to make a backup copy of the information. Without this, it will not be possible to bring the idea to life.

    In general, among the recovery methods via iTunes there are:

    • return to factory settings;
    • recovery of user data.

    In fact, everything is simpler than it seems. But if a person created a copy of his data when iCloud help, then iTunes will not help restore them. This is a completely normal phenomenon that is important to take into account before taking action.

    About iTunes

    Let's start by creating an iOS recovery document. Without it, as already mentioned, it will not be possible to achieve the task.

    First of all, a person must install iTunes on his computer. It is advisable that the application version be the latest. Older builds of the program are no longer supported. Accordingly, the owner of the device will not be able to implement the task.

    You can only restore licensed iOS. And the absence backup copy User data 100% results in a factory reset. And since then there is no way to get the information back. Only if there is a copy in iCloud.

    Making a copy

    How to restore an iPhone using iTunes? The first step, as already mentioned, is to make a copy of the data for recovery. It is worth considering that all information will be saved on the PC in the BackUp folder. And the operation is only possible if there is a connection to a computer.

    To create a recovery copy, you must:

    1. Download the latest version of iTunes onto your computer and install it.
    2. Connect an Apple device when USB help to a PC or laptop.
    3. Launch the application you are studying.
    4. Wait while the devices synchronize.
    5. Authenticate with AppleID. Typically, the corresponding requirement is made immediately after starting iTunes.
    6. Open the "General" tab in the left menu of the program.
    7. On the right side of the window, click on the “Create a copy” button.
    8. Wait a few minutes.

    As soon as the user completes all of the above steps, a copy with the iPhone data will appear on the computer. And now you can start restoring the OS.

    To factory settings

    But first, a little about: Sometimes this operation is vital for normal operation"Apple" smartphone. Under such circumstances it happens full reset data to factory settings. No user settings are saved.

    The iTunes application really allows you to return your devices to initial settings. And it's not that difficult to do. Easier than restoring user information.

    The guide will look something like this:

    1. Turn on your computer and launch iTunes.
    2. Connect an Apple device to the PC. It is important that the connection is made using a USB cable.
    3. Launch the program.
    4. Wait for the computer to synchronize with your mobile phone.
    5. Go to the "General" tab.
    6. On the right side of the window, select the “Restore iPhone” button and click on it.
    7. If the system prompts, log in using AppleID.
    8. Carefully study the consequences of the actions and agree with the operation.

    After listed actions the process will begin iOS rollback. It usually takes from 5 to 30 minutes. Once the operation is complete, the device will reboot and recover. All data will be erased and the settings will be returned to factory settings.

    Recovering data

    Once iTunes has been installed and a backup has been created using it, you can iOS recovery. This is a fairly simple operation that will only take a few minutes.

    How to restore an iPhone using iTunes? The following instructions will help:

    1. Enable iTunes.
    2. Connect your smartphone via a USB cable to your computer.
    3. Launch the application mentioned earlier.
    4. Select the connected device in the "Devices" menu. To do this, click on the name of the device.
    5. Go to the menu item "File" - "Devices".
    6. Select "Restore from backup...".
    7. In the field that appears, mark the line with the desired copy of the data. There may be several of them. All copies are signed with the date of their creation.
    8. Confirm the operation and wait a little.

    The operating system recovery process will begin. After some time, iOS will be restored and the device will reboot. You cannot turn off your smartphone or work with it. Otherwise, the data will not be recovered.

    Results

    From now on, it’s clear how to restore an iPhone using iTunes. All of the above methods work on all Apple devices. Therefore, operations can also be performed on tablets. There is nothing difficult or incomprehensible about this. All actions will be the same.

    "iTunes" - free service that everyone should be able to use iPhone owner. It helps not only create backup copies of data, but also restores device settings. In addition, this program can be useful when downloading music and photos to iPhone.

    Sometimes to recover information on mobile devices use the iMazing application. This free program, which is somewhat reminiscent of iTunes. With its help, you can create a backup copy of data that is recognized by the application you are studying. But such a technique is used extremely rarely in practice. Therefore, to restore information on your phone, it is better to follow one of the instructions previously presented to your attention. How to restore an iPhone using iTunes? The task will no longer be a hassle!

    You've probably found yourself in a situation where your iPhone appears to be non-functional (showing a white on black boot screen). As a rule, users cannot understand how this could happen and wonder about the iPhone. To understand the situation, try to trace your actions. Try to remember if you installed lately any new applications. Have you done hard reset devices when your iPhone freezes for some reason?

    Of course, rebooting can help with this problem, however, try to avoid hard reset device, do it only after you are 100% sure that your phone is not responding. Below is a description of how to restore iPhone 3g and later.

    Most users resort to a solution to the problem such as restoring the iPhone (booting the device in recovery mode), but sometimes they still cannot connect to iTunes. To make the device work correctly again, do step by step instructions on how to restore iPhone.

    1. Turn off the gadget. You may have to do a hard reset (hold Home buttons and Sleep until the screen turns off).

    2. Connect the USB cable to your iPhone and launch iTunes.

    3. Now comes the hardest part of the process.

    You must receive your iPhone in (update the device firmware). To do this:

    a) hold down the Home and Sleep buttons for 10 seconds;

    b) after 10 seconds, release the Sleep button;

    c) Continue holding the Home Button for another 10 seconds.

    If you followed the steps above correctly, you will see a corresponding message in iTunes. If not, repeat the above steps - timing is everything.

    4. On next stages iTunes will restore your iPhone's original firmware.

    After the process is completed, the iPhone is restored, but it will boot up empty.

    5. After the recovery process, the gadget reboots. If you are still connected to iTunes, you will be able to restore the contents of your iPhone from a backup.

    If you stop the process during the iPhone syncing process, it will not complete completely on subsequent attempts. You will then not be able to restore the content from the backup unless you complete a full backup the first time after restoring. It is for this reason that you can find reviews from users who cannot understand why they were unable to restore their iPhone.

    Remember that the process backup will not move at a sustainable pace in the last 5-10%. At this stage, the indicator will remain in place for a long period of time (1 - 3 hours). Don't stop the recovery process. It's okay, it just takes a lot of time. On average, it will take 2.5 hours to complete this process. If you want to know iPhone, count on it for a long time.

    6. Once the recovery process is complete, iTunes will start working faster and the iPhone will reboot.

    7. After this you will need If iTunes is set to launch automatic synchronization, you don't need to do anything.

    Typically, a guide on how to restore an iPhone through DFU mode will help restore the device to full functionality. However, if you decide to go ahead with this process, remember that you must have enough time to spare as the entire procedure can take up to 3 hours.

    When a person tries to restore his iPhone, but problems begin, many questions arise. To use the device in normal mode and troubleshoot, you need to figure out why this or that error appeared and what it means.

    Description of common errors when restoring an iPhone

    1. One of frequently asked questions What users are asking is: “what to do if you couldn’t restore your iPhone, error 3194 is preventing this process.” This means that iTunes cannot request the required SHSH from the server. You can solve this problem as follows: you need to check the version of your iTunes program and install the latest one. Most often this is the solution to the problem. After that, restore your phone.

    Increase

    Another method is performed if the previous one did not show results. This is done easily:

    • You need to exit the program and find the hosts file in the C:\Windows\System32\drivers\etc\ folder.
    • Next, you need to open the file with Notepad and delete the line “74.208.105.171 gs.apple.com”, and then save the document.
    • After this, you need to connect the device to the computer by launching iTunes and entering DFU mode.
    • To do this, hold the lock button and after 3 seconds hold down the main button with it. Then, after 10 seconds, release the lock and wait without releasing the Home button. You will see gray screen on your device.
    • After this, you can try restoring the firmware again.

    If this all works out, it is best to delete the line from the hosts file again and in the future you will be able to update from official servers.

    Another way is to restore the system using special programs, for example, TinyUmbrella, which will help troubleshoot the problem.

    2. When your iPhone does not want to recover and error 1 appears, there could be several reasons.

    • You do not have the latest version of iTunes for this firmware.
    • Are you trying to install more outdated system iOS.

    What to do in this case?

    • Update iTunes.
    • You can make sure that you are using the most latest version firmware on your phone or just install the newest one.
    • It's also best to reconnect USB cable to another port.
    • Try restarting your computer.

    3. In case of error 9, the USB cable itself may be to blame.

    • Try to examine it in detail and check for damage.
    • Try inserting it into a different port on your computer.
    • Restart your computer or get a new cable to make sure everything works.

    4. Error 1015 is common when your iPhone's modem version is changed to a lower version. The problem appears if the device's Baseband has more than new number than the one in the firmware. To resolve the issue, do the following.

    Every owner of an iOS device, whether a novice user or a geek, should know what an iPhone restoration is and how it differs from an update. Moreover, all this is quite simple, to say the least - elementary.

    For those who are not “in the know,” as part of today’s instructions, we will get acquainted with what flashing an iPhone is, what options and methods for flashing there are, how restoring an iOS device differs from updating it, and how to flash an iPhone.

    Why do we say that skills are re iPhone firmware or should every device owner have an iPad? It’s not good for the owner of such an expensive and exclusive device to run around service center whenever difficulties arise in the operation of an iOS device at the software level or Apple presents new version mobile operating system iOS. Moreover, the process itself takes no more than 10 minutes and, in most cases, requires minimal effort from the user.

    We will consider the subject of today's instructions at iPhone example, it will be easier for both us and you, dear readers.

    What is iPhone firmware?

    If we talk about the firmware of an iOS device as a software component, the iPhone firmware is its software or operating system. IN Apple software for iPhone, iPod Touch and iPad are called iOS for short, which translated into English means iPhone Operation System.

    If we talk about flashing an iOS device as a process, flashing an iPhone is a process of restoring or updating software devices. The most commonly used term is “flashing”.

    iPhone flashing options

    There are 2 processes involved in flashing an iOS device:

    • recovery;
    • update.

    At their core, the processes are identical: in the first and in the second case, as a result of flashing the iPhone, new iOS. Moreover, the concept “new” in the case iPhone recovery refers not to the version of the operating system, but to its state, in other words, “clean”.

    iPhone flashing methods

    You can reflash your iPhone in 2 ways, one of them is universal, i.e. used for both recovery and update, the second is only for update:

    1. iPhone firmware via iTunes;

    In the first case, the software is downloaded to the computer and, using the iTunes media combiner, it is downloaded directly to the iOS device. Valid for iOS 4.3.5 inclusive. For iOS 5 and higher, the second method is possible, which involves iOS update directly from the device via the Internet wireless network(Wi-Fi).

    What is the difference between restoring an iPhone and updating it?

    As we have already said, restoring or updating an iPhone refers specifically to the software component of the device.

    Restoring an iPhone is the process of restoring the device to its original settings. When restoring your iPhone, all content (photos, videos, music) and personal data will be deleted ( phone book, calendar information), the device settings will be reset to factory settings.

    In a nutshell, restoring an iPhone means resetting the device to its factory state and installing a “clean” iOS version of the latest version.

    Updating an iPhone refers to the process of moving from more old version iOS to a newer one. As a result of the update, all content, personal data and settings will remain intact and iOS will be updated to the new version.

    As you can see, the fundamental difference between restoring and updating an iPhone is only that as a result of the update, content and personal data are not deleted from the Phone.

    The result is:

    Restoring iPhone = Delete Content + Factory Reset + iOS Update

    As you know, the iPhone, like any other iOS device, can be in several modes provided by the manufacturer: normal mode, (Recovery Mode) and (DFU Mode).

    It is possible to restore or update an iPhone in the following modes:

    • in normal mode;
    • in Recovery Mode;
    • in DFU mode.

    How to restore iPhone via iTunes?

    In order to restore an iPhone via iTunes we will need:

    • latest version of iTunes (preferably). At the time of writing, iTunes 11.1.5.5 is current. ;

    iTunes window saying no update required

    • pre-downloaded file with the version that is in present moment installed on iPhone (optional).

    Warning in iTunes when flashing iOS

    So, let's assume that you have the latest version of iTunes installed on your computer and you have downloaded the firmware file for your iPhone models on hard drive.

    1 If the “ ” function is enabled on your iPhone, disable it in the device settings;

    iTunes warning to disable find iPhone

    2 Connect your iPhone to your computer using a USB cable.
    If in iTunes settings not specified automatic start programs when connecting an iOS device, launch iTunes;

    Selecting a device in iTunes

    3 Go to the device synchronization settings page with iTunes by clicking on the button with the name of the device type in the right top corner next to the " iTunes Store»;

    Device Information in iTunes

    4 While holding down the " Shift"On the keyboard in the pressed position, click on the button " Restore» (for Mac you need to press the button Alt+Restore). A window for selecting the firmware file will appear with local disk;


    5 Select the previously downloaded firmware file with the extension “. ipsw" and click on the button Open". Confirm the request to restore your iPhone. iTunes initiates the recovery process. No further action is required from you, iTunes will automatically delete all content and download the “fresh” firmware to internal memory iPhone. In this case, the device will be transferred to and the device will be restored to its factory state.

    Confirming the start of the firmware process in iTunes

    iPhone is being flashed

    Important to know

    The iPhone recovery process can be completely entrusted to iTunes, and there is no need to download the firmware file to your hard drive, however, after such a recovery, if more latest version iOS, it will be installed on the iPhone. In fact, content will be deleted, settings will be reset, and the iPhone will be updated to the new iOS.

    How to restore iPhone from Recovery Mode and DFU Mode?

    Procedure to restore iPhone from recovery mode ( Recovery Mode) or firmware update mode ( DFU-mode) is completely identical, with only one exception; before restoring, you must enter the iPhone into Recovery Mode or DFU Mode, respectively.

    2. Connect your device to your computer using a USB cable and launch iTunes. The program will detect the iPhone in recovery mode;

    iTunes detects iPhone in recovery mode

    3. While holding down the " Shift"on your keyboard, click on " Restore"(Mac users should press " Alt+Restore«);

    iOS firmware file selection window

    4. Open the previously downloaded firmware file with the extension “ .ipsw«. Further work iTunes will take over, wait for the process to complete.

    Starting the iPhone firmware process in iTunes

    Is it possible to reset an iPhone without updating iOS?

    If we are talking about a “clean” iPhone restore via iTunes, the result will be the latest version of iOS installed on the device, i.e. in fact, the firmware will be updated, and this is not always necessary, especially for owners of jailbroken devices. Why? Because a jailbreak for the current iPhone firmware version appears, as a rule, very late, and as a result, updating the iPhone will entail the loss of the jailbreak.

    Restoring/Updating “locked” (locked under specific operator cellular communication) A jailbroken iPhone entails:

    • blocking a “locked” iPhone - you will not be able to connect the device to the cellular network of another operator;
    • loss of jailbreak.

    Fortunately, there is a way to remove all content from it without updating iOS versions and without losing jailbreak. We have already talked about the SemiRestore utility, which allows you to clear the contents of an iOS device and reset its settings to factory settings without loss. Use it if you have a “locked” or “jaybroken” device.

    iPhone update

    We have already mentioned that there are 2 ways to update your iOS device to the latest version of iOS:

    1. With connection to a computer via iTunes;
    2. Directly from your iOS device via Wi-Fi.

    The first method is practically no different from restoring an iPhone to current version firmware. The second allows you to update your iPhone to the latest iOS without connecting to a computer via Wi-Fi.

    Updating iPhone from computer via iTunes

    1. Connect your iPhone to your computer using a USB cable and launch iTunes. Go to the “Devices” menu and select your device;

    Selecting a device in iTunes

    2. On the page for setting up synchronization and settings for connecting the device to iTunes, left-click on “ Update". Confirm that your iPhone is updated to the latest version of iOS.


    3. You can save time and not wait for iOS to download to the iTunes service folder by first downloading the current iOS to your hard drive. Using the combination " Shift+Refresh» Initiate the firmware update from the hard drive.

    After the update, you will receive an iPhone with the latest iOS on board; all user content and settings will be saved.

    Update iPhone over Wi-Fi

    With the advent of iOS 5.0, developers integrated the ability to update firmware directly into the mobile operating system. Starting from iOS 5.0 and higher, the “Software Update” menu item is available in the settings of iOS devices. The update is only available when connected to the Internet via Wi-Fi. Bandwidth Internet connection cellular networks does not allow you to update iOS over a 2G or 3G connection.

    1. On iPhone, go to Settings – Basic – Software update;

    Go to software update in iPhone settings

    2. Tap on " Download and install" and in the next window, accept the terms of use. Wait for the process to complete.

    This is what updating an iPhone via WiFi looks like

    Let us remind you once again that updating iOS does not entail the loss of user data and content and resetting settings, but it is dangerous for “jailbroken” and “locked” devices.

    Video on how to update to iOS 11 via WiFi on iPhone 6s

    Video instructions for restoring and updating iPhone

    As you can see, there is nothing complicated about iPhone flashing, which includes both updating and recovery. Learning basic skills in managing iOS devices is both useful and allows you to save on trips to service centers.

    If you have any difficulties or errors appear when flashing iTunes, write to us in the comments, we will try to help you!

    Read more: