• Allow windows 7 updates. How to disable Windows update

    Any operating system needs regular updates. Updates are a “set” of improvements and enhancements that enable the platform to work more stable, faster, and more optimally. By default, the option is enabled in Windows 7 automatic download updates, however, not every user likes this, since, unfortunately, there are often cases when updates do not lead to improvements, but, on the contrary, to various freezes and malfunctions of the system. This situation is associated with various reasons, for example, failures during the update, insufficient memory on the PC, etc.

    In this regard, many users are looking for an answer to the question how to disable updates in Windows 7(and if you want to remove updates, then read the article?). In this article we will answer it.

    Disabling Windows 7 updates

    Let us immediately note that you can either completely disable Windows 7 updates or disable only the automatic update mode, setting it to manual instead and manage the update procedure at your discretion. First, let's look at how to disable updates completely in Windows 7.

    To do this, follow these instructions:

    1. Press the “Start” key, select “Control Panel”.

    2. In the window that opens, opposite the “View” line, set the “Small icons” option.

    3. Click the “Administration” section (see screenshot above), in the window that opens, double-click on the “Services” line with the left mouse button.

    4. In the list that appears, find the “Windows Update” item, double-click on it with the left mouse button.

    5. In the window that opens, in the “General” tab, find the “Startup type” parameter and select “Disabled” in the drop-down list.

    6. Now click first the “Apply” button, then “OK”.

    7. Done! Windows Update is completely disabled!

    If you want to enable “Windows Update”, follow steps 1-4 of the above instructions, then in the window that opens, in the “General” tab, find the “Startup type” option and select from the drop-down list:

    “Automatic” option - if you want updates to run in automatic mode;

    The “Automatic (delayed launch)” option, if you want updates to be downloaded automatically, but installed at your command;

    “Manually” if you want to download and install updates yourself.

    Don't forget to click the Apply button before clicking OK for the changes to take effect!

    Disabling Windows 7 updates automatically

    If you want to disable Windows 7 updates automatically, then there is an easier way to perform this procedure, follow the instructions:

    3. Now find the “Windows Update” section and click on it.

    4. In the window that opens, click “Settings parameters”.

    5. In the window that appears, in the “Important updates” section, select the “Don’t check for updates (not recommended)” option from the drop-down list, and then click the “OK” button.

    6. Done! Now automatic Windows 7 updates will no longer bother you.

    Configuring updates manually

    If you follow the above instructions, your PC will never update automatically again. But if you want your PC to be updated in principle, you need to configure updates manually, for this:

    1. Press the “Start” key, select “Control Panel” (see screenshot above).

    3. Now find the “Windows Update” section and click on it (see screenshot above).

    4. Click on the “Check for updates” button, the system will start searching available updates, and after a while it will display a list of available updates.

    5. When the search procedure is completed, you will see that all updates are sorted into two lists - “Important” and “Optional”, you can open each one and install the desired updates. You can install all updates, or selectively.

    6. After selection necessary updates, click “OK”, then the “Install updates” button, this process depending on the number of updates, time last update and your internet speed may take a completely different amount of time.

    7. Once the update process is complete, be sure to reboot and then the updates will take effect.

    Results

    So, now you know how to disable updates in Windows 7, as well as how to manage updates manually. We hope this information turned out to be useful for you!

    Automatic installation of updates is a feature that Microsoft has included in its OS since Windows XP, in my opinion, in one of the service packs, but I don’t remember exactly which one. In general, the developers themselves categorically do not recommend turn off automatic updates because this may compromise its security, however, in some cases it makes sense. For example, if your copy of Windows is not entirely of licensed origin.

    Why disable automatic Windows updates?

    Installed on my personal laptop licensed Windows 7 Home Basic, and I turned off automatic updating almost immediately. And I don't even want to.

    You know, everything works great, no failures for almost 3 years.

    • sometimes users turn off updates because after them crashes occur, the computer stops loading altogether, blue screen death, or their installation continues for a very long time.
    • Also, the reason why you want to turn off automatic updates is the small size of drive C. The free space on it runs out very quickly, especially since Windows downloads and installs them almost every week.

    How can I prevent update requests from appearing at all?

    Turn off all updates in Windows 7

    To get rid of Windows 7 updates once and for all, I have prepared the following instructions. It is valid for any edition of “Seven” (Elementary, Home, Home Extended, Corporate, Professional or Ultimate). Right click on My Computer and go to Properties. Let's go to Windows Update

    On the left in the list, select “Settings parameters”

    We need to set the switch to the “Do not check for updates” position, check the “Recommended updates” section and click OK.

    We are looking for a service called “Windows Update”. We put startup type: Disabled and click OK. Reboot the Computer.

    We remove all notifications about the need for updates

    Now you need to get rid of notifications that updates are turned off. We look in the tray, click on the flag image and select “Open support center”.

    We turn off all notifications that relate specifically to the update center. I found 2 of these in mine.

    This completes the instructions. I hope you found it useful. Switching on can be done in reverse order.

    Back in the Windows XP operating system, the developers introduced a special service that was responsible for periodic updates. They were automatically downloaded via the Internet from Microsoft servers to the user’s computer, and the system determined whether to install them at the user’s request or automatically. Let's look at why they are needed and how to disable them Windows update 7.

    What are they for?

    According to the creators of the system, fresh updates have a positive effect on its operation. program code. They specifically work to improve and optimize performance computer processes in the system. As a result, all efforts are designed to improve performance. The computer should become more responsive, and various bugs and errors should disappear. Updates often also provide new features:

    • diagnostic and troubleshooting tools are being improved;
    • modern peripheral equipment is supported;
    • new functions are added to the system;
    • patches for the system are added Windows security and other useful things.

    For those who have a licensed Windows system, installing such updates, as a rule, does not threaten anything.

    But, based on the bitter experience of many computer owners, these updates are only needed if they are able to bring real benefits. But which one ordinary users will be able to determine in advance the usefulness of Microsoft's proposed improvements. If a game or program is unstable on a given operating system, it will tell you exactly what updates are needed. But when the computer works reliably, stably and does not produce unexpected glitches, then what is the point of updating if it already works quickly. As admins joke: “if it works, don’t mess with it,” but it’s better to completely disable Windows 7 updates. Often they can cause a lot of problems. Why take the risk and see if you're lucky?

    Why might you need to turn it off?

    There are several reasons for the question of how to disable automatic updates in Windows 7:

    • The user has a pirated version operating system. And if you completely disable the update, there is a risk that the Microsoft server will issue a “red card” and limit the functionality of the operating system for using unlicensed Windows 7 just comes down to zero.
    • There are often cases when an updated system unexpectedly produces a critical error, which only the full recovery, and wondering how to turn off Windows auto update 7, it's clearly too late.
    • Small size system disk, most often this is drive “C”. And since the patch packages are very voluminous, then free space disappears instantly. Therefore, it becomes imperative to disable automatic updates on your computer.
    • The need to wait for the computer to turn off after an update in Windows 7. Those who updated were faced with a situation where they needed to turn off the laptop, and a warning appeared on the monitor screen stating that this cannot be done, because “ installation in progress updates for Windows 7 1 out of 1235! And the user must choose either an updated system or good sleep. Here you will inevitably think about how to prevent the system from updating.
    • If the Internet is limited in incoming and outgoing traffic. For such users, the question of how to disable automatic updates of Windows 7 is also relevant.
    • If the Internet channel has low speed, then it is better to disable this service in Windows 7 forever.

    If at least one of the above reasons is relevant for your system, then it is better not to look for Windows 7 updates.

    Well, now about how to disable updates. There are two ways. Let's look at each of them separately.

    Disable completely

    Before you turn off Windows 7 Update, must be found Management service. Let's consider the sequence of actions:

    Once this service is completely disabled, the system will not be updated. But if you want to receive Windows 7 updates, if you carry out all the steps again, full functionality can be restored by changing the settings.

    Disable only automatic update

    If you want to reserve the right to download and install updates yourself manually, you can limit yourself to disabling automatic search.

    Let's look at how to do this:


    Now the system will search for updates, but will not install them automatically without the user’s permission. The computer owner can manually download updates from the Download Center at any time by clicking the button Check for updates.

    Disable system notifications

    After these steps, the system will not search for updates and install them automatically. But that's not all. Since this is a negative event for Windows 7, it will still remind you of this with a flag with a red cross in the right corner of the monitor.

    Let’s turn off this reminder of the changes made:

    Now the red cross has disappeared and the operating system does not display any reminders.

    But nothing prevents you from updating manually if you want. All you have to do is start searching for Windows 7 updates again.

    Conclusion

    Concluding this small description of what you need to do system update, and how to disable the update service, we would like to remind you that each user can install the update manually, as well as disable the update service completely or partially. We hope these help you brief instructions. They are quite simple, but will keep your computer working for a long time.

    Video on the topic


    In all Windows versions present important function- update. Like most programs, Microsoft uses this opportunity to make timely changes to the system, improve its operation or eliminate vulnerabilities.

    Despite the presence of positive aspects in this function, for most users it is unnecessary or simply interferes more than it brings benefits. Many active PC users experience difficulties with updates and prefer to disable them.

    Reasons and methods for disabling

    The main reasons for disabling updates in Windows 7 are:

    • Microsoft refused to update Windows 7, that is, updates will not be released, except for critical ones, if vulnerabilities are discovered;
    • During the update, the computer experiences heavy load, since installing files requires resources;
    • The Internet channel is heavily loaded, that is, during downloading, the speed is significantly limited and comfortable surfing is difficult;
    • You cannot turn off your computer while installing or downloading updates;
    • If you are using pirated Windows, you may encounter problems as new ways to combat piracy are gradually released;
    • Limited traffic.

    On this probable reasons not finished, but for clarity they are enough.

    There are 4 ways to disable automatic updates in Windows 7:

    • Using the Update Center;
    • Through services;
    • Using the console;
    • Through a firewall.

    Most of the features are standard, but a workaround (last option) can also be used.

    Using the Update Center

    In Windows 7, there is a special tool that is responsible for the entire update system. It is thanks to him that there will be no difficulties in how to disable the Windows 7 update. To use it you should:

    • Click Start and Control Panel;
    • Click on the “Windows Update” tile;

    • Go to the “Settings” section;
    • Select "Don't check for updates."

    In addition to radically disabling a function, there are transitional positions when you can influence the installation of software. This is how the check occurs and, if something new appears, the user makes decisions. It is also advisable to remove all checkboxes under the main menu.

    How to disable Windows 7 Update via Services?

    A special module, that is, a service, is responsible for the update procedure. It is an invisible part of the previous method. The service can also be disabled; the result will be similar, only it is performed without a graphical interface.

    • PKM for “Computer”;
    • Click on “Management”;

    • Expand the “Services and Applications” category, then select the appropriate section;
    • At the end of the list, find “Windows Update” and double click;
    • “Startup type” - “Disabled” and “Stop”.

    Here you can also disable the Windows 7 update permanently or set the startup initiation to “Manual”. That is, the user will independently carry out updates at a certain frequency.

    Disconnect using the console

    The console always comes to the rescue in difficult situations and it is capable short command change some parameters that are located deep in the system. Therefore, it is impossible to consider the topic of how to disable the Windows 7 update service without mentioning the command line.

    To disable the service you must:

    • Press Win + R and paste cmd;
    • Enter the command sc config wuauserv start=disabled;

    If you want to change the startup type to manual mode, then replace the last word with demand. All the methods above work on the same principle, only the method of changing the parameters differs. There is also an alternative option.

    Blocking updates through a firewall

    The firewall itself allows you to control the traffic leaving your computer, so it can be filtered. It is this function that is important for us. Instead of simple shutdown updates, you can install some kind of stub. All requests for a specific domain will be redirected to local address, that is, to nowhere. The service, without receiving a positive response about the availability of data on the server, will think that everything is fine with the system.

    The most in a simple way The plug installation is:

    • Follow to C:\Windows\System32\drivers\etc;
    • RMB on hosts and open with a text editor;
    • Place the entry “127.0.0.1 https://*.update.microsoft.com” at the end of the list.

    Also, if it doesn’t work, add “127.0.0.1 microsoft.com”, but then even in a browser you will not be able to access the corporation’s website. This method also works for most programs that require access to the network; to block them, simply change the domain to the required one.

    You should understand that by disabling updates you are deliberately putting your computer at risk, since antivirus signatures, system settings and Windows stability are out of date. It is still better to manually perform at least critical updates.

    First, we recommend disabling the update center using standard methods, but another way is also available. After completing the procedure, you remain the full owner of the system and no background tasks will load Windows.

    If you still have questions on the topic “How to disable updates in Windows 7?”, you can ask them in the comments


    if(function_exists("the_ratings")) ( the_ratings(); ) ?>

    Greetings to all those who use the operating room Windows system 7 because today's article will talk about how to disable automatic updates in Windows 7.

    In general, in most cases this is necessary for those people who use pirated version operating system so that Windows does not try to connect to its servers. The results of such updates are an inscription on the desktop that your Windows is not licensed. However, many users who use a license also dream of disabling updates, since not everyone has unlimited Internet or for their own reasons. However, if you have unlimited internet And licensed Windows, then I recommend that you set up automatic updates for your own safety.

    Now let's see clearly who is going to disable Windows updates.

    Disabling updates

    First of all, go to the “Start” menu, then to “Control Panel”. We find ourselves in a window called “Configuring computer settings.” A little further, to the right of this inscription, there is another one - “View”. Set the “Small icons” option there (you can select “Large”, I just like it better).

    So, to get started with the settings to disable updates, click on the left: “Customize settings.”

    A list of update methods appears before us. For complete shutdown updates, in each of the sections listed below, the appropriate parameters must be set:

    Important updates. In the drop-down list, select: “Do not check for updates (not recommended).”

    Who can install updates. Leave everything as default.

    So, now you have understood in practice how to disable automatic updates in Windows 7, but in order to be completely calm that Windows will definitely not download updates, disable the service that is responsible for this. The procedure is as follows: right-click on the “Computer” icon on the desktop. If you do not have it, find the inscription of the same name in the Start menu. Next you need to click on the item: “Management”.

    I would like to point out that if you are trying to do this under account Without administrator rights, you will not be able to perform these actions. After you have managed to enter “Management”, you will notice a list on the left. We look for “Services and applications” there, and in it - “Services”.

    Now we turn our attention to the list that appears on the right. We are looking for “Windows Update” there. This service is almost at the very end of the list.

    Double-click on it with the left mouse button and select “Startup type”: “Stopped” and click “Stop”. Then click on the “OK” button.

    That's all for today! Good luck to everyone, bye everyone!

    Read more: