• Win 10 asks for a password

    If you are the only one using your computer, or you trust those you share it with, then why not remove the password when logging into Windows? This allows the computer to boot faster, straight to the desktop, and can save time. It also removes the extra startup step so Windows can jump to the desktop without your intervention.

    Alternatively, if other people have access to your computer, you can enable a login password to keep their data safe.

    Enable password when signing in to Windows 10

    Password login is enabled by default or when Windows update 10, or at new installation. If you previously disabled it or for some reason did not enable it, follow these steps:

    You will need to either log out and log back in or reboot the system for the changes to take effect.

    Disable password entry when logging into Windows 10

    To disable password entry, you are essentially doing the opposite of the above.

    1. Press the keyboard shortcut Ctrl+R and enter " netplwiz».
    2. Uncheck the box next to " Require username and password" and then click " Apply».
    3. At Windows request enter the password twice .
    4. Click "OK" to save changes.

    You will need to log out and restart your computer for this change to take effect.

    If you know more quick way enable or disable password in Windows 10? Please write in the comments.

    What are the differences between them? When using a local account, you usually plan to work on one computer, without synchronizing settings, installed applications and objects on the desktop. This approach was used back in Windows 7, and it may not require entering a password when logging into Ten.

    With the advent of Windows 8, the authentication method has changed, and now, along with using a local account, it has become possible to use a Microsoft account when logging in. In this case, all OS settings are synchronized with the server, and you can log into your account from other devices. Authentication using a Microsoft account requires the user to set a password each time they try to log into the OS.

    In the material presented, I will share with you tips on how to get rid of this. It is advisable to do this if no one is working at the computer except you, and you do not care about the safety of your confidential information(such as the password stored on the PC for email, pin and code bank card, means of logging into other services). If someone else is working on your computer, it would be wiser to leave the OS login locked.

    Method 1 – by changing user account settings

    You can remove a password in Windows 10 in different ways. One of them is to use the user account settings.

    Open the mini command input panel through the “Run” menu by pressing the key combination Win+R(the Win button is a key on the keyboard with a picture on it Windows logo). On the panel that appears, enter the command netplwiz.

    A form opens with settings for working user accounts. Select our active user in the list and uncheck the box that requires entering the username and password.

    Click the “Apply” button. A transaction confirmation form appears, where you need to specify the current password for your active Microsoft account.

    Enter your login password twice in the appropriate fields and click OK. We check that the checkmark in the field we need has disappeared and reboot to check if our method worked.

    Method 2 – Using Registry Editor

    One of the main disadvantages this method- this means that your password will be available for viewing in clear text in the registry, and anyone interested will be able to see it. Besides this, this algorithm very reliable and comfortable, so in a progressive approach this method you can rest assured.

    We launch the registry editor when using a key sequence Win+R and entering the command regedit. Opens working window editor.

    Opening a thread HKEY_LOUCAL_MACHINE \Softwares \Microsoft \WindowsNT \Current Version \Win logon.

    1. Changing the value AutoAdminLogon by double-clicking on this field, as a result of which the value of the parameter should change from 0 to 1.
    2. Changing the value DefaultDomainName to the domain name or local PC name. You can always see this value on the computer properties form. To call it, right-click on open conductor on the “This PC” object and select “Properties” from the pop-up menu. Here you will find the full name of your PC.
    3. Change the field value if necessary DefaultUserName to a different name, or simply leave the active user untouched
    4. Generate String Element DefaultPassword, and in the “Value” field enter the password of your current account.

    Now all that remains is to check the effectiveness of the procedure performed by restarting the computer and trying to log into the system.

    How to remove password entry when exiting sleep mode?

    When leaving sleep-mode a form also appears asking you to provide an account code. We'll remove that too.
    To do this, go to Windows settings by selecting the appropriate item in the Start menu.

    On the parameters form, go to the subsection “Accounts” -> “Login Options” and in the first paragraph we change the value of the parameter to “Never”.

    Well, that’s all, now you have the right to freely leave the computer for any length of time, and the password request window will not appear.

    Method 3 - Reverting to local account authentication upon login

    As I already said at the beginning of my article, the authentication method can be changed from local to Microsoft and vice versa. Let's say that you preferred the last option. Then, if you switch to a local account, the need to enter a password every time will disappear by itself. How can I switch back to the local authentication method? Go to the menu Windows Settings via the Start menu.

    The first number will ask us to enter the password for the active account. Let's do so.

    The next form will ask you to enter your local account username and password. We enter the username arbitrarily, but intentionally leave the password fields blank.

    Now everything is ready. We exit the operating system and log in with fresh authentication parameters by clicking on the button on the next window to log out.

    Now log in again and make sure that a password is not required.

    So we figured out how to remove the administrator password when logging into Top Ten. Some of these methods are safer, others are more convenient and practical. We tested them all and can say with clear confidence that they all work. Choose whatever you like and enjoy the comfort of working in Windows 10.

    It often happens that there is no need to enter a password every time Windows startup 10. For example, you home computer or a laptop, and you are sure that no one except you and your close relatives (who already know the password) will be able to use the device. And you want your Windows 10 to start right up to the desktop when you start your computer, without the obstacle of having to enter a password.

    If you are sure that you definitely don’t need a password when logging in, then I’ll tell you step by step with pictures, how to disable entering a password when logging into Windows 10.

    In Windows 10 this is done in the same way as in previous versions this operating system from Microsoft: “seven” and “eight”.

    To begin, hold down the Win key (this is system key Windows on the keyboard, located, as a rule, between the left Ctrl and Alt), you must press Latin letter R.

    In the Run window that opens, enter the command netplwiz and click OK.

    In the “User Accounts” window that opens, we need to uncheck the “Require username and password” checkbox, and then save the changes made by clicking OK.

    The final step will ask you to enter your password twice to confirm that you really want to disable password entry when logging in. Windows system 10.

    That's it. Windows 10 will no longer require you to enter a password when logging in. Your computer will start up on its own to the desktop state while you, for example, go about your business in the morning.

    Pay attention! Disable password entry when booting Windows 10 may not turn off immediately, but only from the second reboot. That is, the next time you turn off and turn on the computer, you will have to enter the password. Perhaps this is a glitch of the operating system, or perhaps its additional protection.

    Need I say that enable password entry when logging into Windows 10 you can do it the same way.

    P.S.: After writing the article, the following entry appeared in the comments below: “ After all the suggested actions, I rebooted twice; Initially it does not require a password, but if the beech lid is closed and opened again, it asks for a password again.» A Windows 10 user had a completely natural and fair question. Therefore, I am adding here a way to cope with this task.

    Before that we are with you disabled the password request when turning on or restarting the computer. And in this case (closing the laptop lid), the computer goes into sleep mode. The appearance of the password after exiting these states is determined by completely different parameters. And here's how to disable it:

    1. Stand in search bar Taskbar (magnifying glass next to the Start menu)
    2. Type the phrase " Login Options»
    3. Run the found tool " Login Options» .
    4. Under Login Required, select " Never».

    Or here's an even faster way:

    1. Press Win + i
    2. Select the “Accounts” item.
    3. In the left column “Login Options”.
    4. In the “Login required” item, set “Never”.

    Thus, you and I are still disabled the password request in Windows 10 after waking up from sleep .

    There are questions regarding disabling the login password. The Windows 10 operating system requires you to enter a password for your account Microsoft records every time you turn on the computer and log in, which is quite annoying for users. Especially if the password is quite complex and the user cannot enter it from memory.

    If you also encounter a similar problem, then this article should help you. Now you will learn how to disable the login password in Windows 10.

    Step No. 1. Execute the “netplwiz” command.

    In order to disable the password when logging into Windows 10, you need to run the “netplwiz” command. This can be done in several ways. For example, you can open the Run window using the Windows key combination + R and enter the command “netplwiz”.

    You can also use the search. To do this, open the Start menu and search for “netplwiz”. After this, the system will prompt you to run this command.

    Step No. 2. Disable the password when logging into Windows 10.

    After executing the “netplwiz” command, a window called “User Accounts” or “User Accounts” should appear on the screen if you have English Windows version 10. In this window, you need to disable the “Require username and password” function and click on the “Ok” button.

    Step No. 3. Confirm that the password is disabled.

    After clicking the “Ok” button operating system will require confirmation by entering a password. Enter the current password twice and click on the “Ok” button again.

    At this point, disabling the login password can be considered complete. Now when you turn on the computer, the system will not require you to enter a password. But, the password will be required when exiting sleep mode. To disable the password when resuming from sleep mode, follow step #4.

    Step No. 4. Disable the password when exiting sleep mode.

    If you have Windows 10 without updates, then in order to disable the password when exiting sleep mode, you need to right-click on the “Start” button and select “Power Management”.

    You can also open the Power Options window by searching in the Start menu. To do this, enter search query"Power supply."

    In the power management window, you need to go to the “Require password on wakeup” section. The link to this settings section is on the left side menu. If you do not have the “Request password on wakeup” section, then you may have a “Power button action” section where the same settings are available.

    After this, you need to enable the “Do not ask for password” function and save the settings by clicking on the “Save changes” button.

    After these simple manipulations, the password when logging into Windows 10 will be completely disabled. Now the operating system will not require you to enter a password after turning on or resuming sleep mode.

    If you have installed latest updates for Windows 10, then you will not have the settings described above in the “Power Options” section. In your case, you need to use the "Options" menu. To do this, open “START”, go to “Settings” and find the “Accounts - Sign-in Options” section there. In this section, there will be an option called “Login Required”, you need to set it to “Never”. After this, the system will disable the password when logging into Windows 10.

    If you have Windows 10 Professional or Windows 10 Enterprise, then you can also use the Editor group policies. To do this, run the command “gpedit.msc” and in the window that appears, go to the section “Computer Configuration - Administrative Templates - System - Power Management - Sleep Settings”. In this section, you need to disable two functions related to the password request when exiting sleep mode (marked in the screenshot below).

    Once again, I repeat that the Group Policy Editor (gpedit.msc) is only available for Windows 10 Professional or Windows 10 Enterprise. If you have Windows 10 Home, you can disable the password prompt when resuming from sleep mode only through the Settings menu.

    Romanov Stanislav 10.01.2019 1473498

    How to remove password when logging into Windows 10?

    Do you want to quickly boot into work? Windows table 10, skipping the login screen? Want to avoid entering a password? account every time you turn on the computer? You can easily disable the login password and configure Windows operation 10 on automatic download to the desktop or start screen without entering it.


    The main advantage of logging in without a password is that the account will not require you to enter it, which means you do not need to remember it and spend several seconds during loading. That is, it will launch the desktop a couple of seconds faster. But, on the other hand, remember that it is much easier to access a PC without a password (for example, for children).

    The procedure for setting up automatic login in Windows 10 is very similar to the same operations in Windows 7 and Windows 8. Therefore, some of the screenshots were taken in Windows 8.1. This method applies to both a local account and a Microsoft account. In other words, you can use these instructions regardless of your account type.

    Warning: turn on automatic login only if you are the only PC user. If the computer is used by other people (and children), it is best to keep the accounts locked.

    You can follow one of the methods given below to enable automatic login in Windows 10 without entering a password.

    Method No. 1 for automatic login without entering a password

    This is the easiest way to remove password from Windows 10 login screen.

    Step 1: Open the Run window by pressing Win+R (Windows logo key and R key) at the same time. In the dialog box, type Netplwiz and then press enter.

    Step 2: This will bring up the "Accounts" dialog box, select the user account, and then uncheck the "Require username and password" option. Click the “Apply” button, then the “Automatic login” window will open.

    Step 3: In the automatic login dialog, enter the password, re-enter it to confirm, and click “OK”.

    Step 4: Make sure the check mark is gone. You can try rebooting the system to check the effect.

    Method number 2 to remove the password through the registry

    If, for some reason, you are unable to set up automatic login in Windows 10 by following the above method, please use this one.

    Step 1: Open Registry Editor. To do this, open the Run window (using the Win+R keyboard shortcut), type Regedit in the available field, and press Enter. Click the “Yes” button if a new window appears asking you to make changes to the system.

    Step 2: In Registry Editor, navigate to the following section:

    HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon

    Step 3: On the right side of the editor, find the option called DefaultUserName, double-click on it and make sure that the name of your Microsoft account or local user account is mentioned in the “Value” field.

    Step 4: Next, again in the same part of the window, find the DefaultPassword parameter. If there is no entry, create one by right-clicking on the empty space, clicking the New button, and then clicking on String Value. Rename it DefaultPassword and enter the password in the Value field. Click OK.

    Step 5: Lastly, you need to enable automatic login. To do this, in the same part of the editor, find the entry labeled AutoAdminLogon, and then change its value from “0” (zero) to “1” (one).

    Read more: