Burning a bootable USB flash drive from an iso image. Writing an iso image to a USB drive (creating a bootable flash drive)
You are probably looking for: how to burn an image to a flash drive via UltraISO? Great! Then in this article we will create a bootable USB flash drive: format it and “throw” the OS image. We'll start by installing a special program. Forward!
Installing the software
We “drive” the request “UltraISO” into Yandex. This is the name of the program we need. To download UltraISO for free, I recommend choosing ex.ua from the list of suggested sites. He silently gives necessary files without unnecessary “brainwashing” and “Trojan surcharges”. By the way, a browser is convenient for such things.
Download installation file to the computer and click it, starting the installation. The installation will be easy, since you don’t need to change anything at each step, just click the “Next” button. And, of course, check the box next to “I accept the terms of the agreement.” At the end of the process, click “Finish”.
When you launch the program for recording to a flash drive, a window will appear asking you to buy it. But this is not necessary if you have a key. Otherwise, use the demo option and click “Trial period”.
Screenshot 1. Launching UltraISO
After this, the utility will launch. Let's work in it!
Preparing to burn an ISO image to a USB flash drive
Before burning a Windows image to a flash drive via UltraISO, insert the flash drive into the USB connector of the computer. We transfer all the necessary files to the hard drive. Right-click on the flash device in Windows Explorer and select “Format” in the context menu.
![](https://i1.wp.com/marketsamurai.ru/wp-content/uploads/2015/12/2-menu-formatflesh.png)
A formatting window opens. Here you can leave everything as default, but I installed the NTFS file system: it supports large files.
![](https://i2.wp.com/marketsamurai.ru/wp-content/uploads/2015/12/3-menu-formatfexplorer.png)
If you uncheck the box next to “Quick...” in the formatting methods, the process will take longer, but the content will actually be deleted.
At fast way Only the directory is cleared. In this case, new files are simply written over the old ones. But this is a topic for another article. If you haven’t had any glitches and don’t need to change the file system, then a quick cleanup is enough.
At the bottom of the window, click “Start”. The system warns that our further actions will erase all information on the flash drive. But we saved the necessary files on the hard drive. Isn't it? Then click “OK” and watch the continuation.
When finished, “Format Complete” will appear. The original window will remain, where near the “Start” button click “Close”. Let's move on to iso files.
We write the image to a USB flash drive
Now we’ll find out: how to burn a Windows 7 image to a flash drive via UltraISO. Do you have a different Windows? And we will consider your option.
Launch UltraISO. Let's get acquainted with the interface. Appearance reminds Windows Explorer, only double: one “sits” on the head of the other.
![](https://i2.wp.com/marketsamurai.ru/wp-content/uploads/2015/12/4-iso-stepone.png)
The bottom half shows the following: on the left are the computer folders, on the right are their contents.
Therefore, on the left we find the folder where we have the iso image operating system. If you do not have such an image, then download it from the Internet: – good tool for searching and downloading.
Let's return to the program. On the right, double-click on the file and observe its contents at the top of the utility: we see the future flash drive: what it would look like if this file was copied to it.
![](https://i1.wp.com/marketsamurai.ru/wp-content/uploads/2015/12/5-over-flash.png)
There will be folders on the left, and their contents on the right. The screenshot clearly shows the inscription at the top on a red background. This means that to write the image to a flash drive, you need to find another iso file of a smaller size or take a larger flash drive.
Let's do it. And again click on the image file. Now everything is OK.
![](https://i1.wp.com/marketsamurai.ru/wp-content/uploads/2015/12/6-startiso.jpg)
How to burn Windows to a USB flash drive? In the menu, select “Boot => “Burn Hard Disk Image...”.
The recording window will open.
![](https://i1.wp.com/marketsamurai.ru/wp-content/uploads/2015/12/7-window-create.png)
We select the “USB-HDD+” method, and opposite “Hide Boot Partition” should be “No”.
You can also do formatting here if you forgot to do it earlier. Click “Record”. Stop! Just a minute. One more useful option, which I specifically did not mark so as not to clutter the screenshot: in the line “ Disk Drive"You can check the box next to "Verification". Then everything will happen virtually: the program will allow you to imagine the process as it starts.
Then just uncheck the box and press the record button to record the real Windows image to a flash drive.
They will ask us again: are we confident in our actions? Let's remember: the necessary files were “dropped” onto the hard drive, USB flash drive formatted. Yes, we are ready! Click “OK”.
We observe the entire process in the information field of the program. When finished, we will see: “Recording complete.” Hooray! We managed to burn Windows onto a flash drive!
![](https://i2.wp.com/marketsamurai.ru/wp-content/uploads/2015/12/8-record-success.png)
All we have to do is close the window with the “Back” button.
In addition to the OS, you can use the same method to write an image to a flash drive via UltraISO for videos, movies and games. But we will now continue with Windows.
Booting from a flash drive
To install the system, indicate in BIOS settings loading from a flash drive. You may ask: “What about me? After all, I was looking for: how to burn a Windows 8 image to a flash drive via UltraISO? I want to please you that the entire process described above is suitable for your system, as well as for those who have Windows 10 or XP.
First, let's enter the BIOS. We reboot and carefully monitor the process: before logging in, the following message should appear: “Press Del to enter SetUp.” At this moment, press Del on the keyboard. If another key is indicated, then press the one that is recommended.
Not all beginners succeed the first time, then you will have to reboot and practice.
In the BIOS, find the advanced settings “Advanced BIOS Features” and click Enter.
![](https://i0.wp.com/marketsamurai.ru/wp-content/uploads/2015/12/9-BIOS-1.jpg)
If you have not yet worked in such an environment (this is DOS), then pay attention to the prompts at the bottom of the monitor: all actions are performed only using the keyboard. The mouse is resting here. Navigation through the menu is performed using the keyboard arrows “Up” and “Down”.
Let's go deeper into the submenu. Select “First Boot Device" and press Enter again.
![](https://i2.wp.com/marketsamurai.ru/wp-content/uploads/2015/12/10-BIOS-2.jpg)
We make a mark opposite “USB-HDD”.
![](https://i1.wp.com/marketsamurai.ru/wp-content/uploads/2015/12/11-BIOS-3.jpg)
In “Second Boot Device” set “HDD”. We check that everything is correct.
![](https://i2.wp.com/marketsamurai.ru/wp-content/uploads/2015/12/12-BIOS-4.jpg)
We complete the changes and exit with the F10 key. Now after rebooting we can install Windows using a bootable USB flash drive.
More features of UltraISO
You can do many more useful things through the flash drive image program! Let's meet them!
The utility works with all major image formats and is capable of converting them to ISO. It writes discs and can extract the boot sector of the hard drive. You can even record an image hard drive to a flash drive via UltraISO.
UltraISO can:
- create CD, DVD images, USB flash drive, HD;
- emulate them;
- Using the original program.
- edit (insert files into the image and remove them from there).
Let's go through some of the functions.
Creating an image. How to burn an image to disk using UltraISO? Click on the menu “Tools => Create CD image...”.
![](https://i2.wp.com/marketsamurai.ru/wp-content/uploads/2015/12/13-menu-createform.png)
The function window appears. Here we select the drive, if there are several of them. Check the “Ignore reading errors” checkbox. This is important when working with overwrite-protected discs, especially in UltraISO video formats. Change the folder for saving the iso file or leave the one that is offered by default. We don't touch the format. Although you can change it if necessary. Click “Make”.
![](https://i0.wp.com/marketsamurai.ru/wp-content/uploads/2015/12/14-window-createform.png)
After the process is completed, we will obtain the required image.
Note. If you could not find the iso file you created, then start doing everything over again, but in the image creation window, do not click the “Make” button, but look at the path to the file under the text “Save as”.
Emulation. First, go to “Options => Settings”.
![](https://i0.wp.com/marketsamurai.ru/wp-content/uploads/2015/12/15-menu-option.png)
Then in the settings window, open the “Virtual drive” tab and specify the number of drives. Here they are called devices.
![](https://i1.wp.com/marketsamurai.ru/wp-content/uploads/2015/12/16-number-drive.png)
Then we do emulation. Go to “Tools => Mount to virtual drive...”.
![](https://i2.wp.com/marketsamurai.ru/wp-content/uploads/2015/12/17-menu-emulation.png)
![](https://i1.wp.com/marketsamurai.ru/wp-content/uploads/2015/12/18-window-emulation.png)
We “drop” the image onto disk. Again, the “Tools” menu item helps us and click “Burn CD image...”. In the recording window, you need to click “Record”.
![](https://i2.wp.com/marketsamurai.ru/wp-content/uploads/2015/12/19-window-recordcd.png)
In the information field after the end of the process it will be written: “Burning completed successfully.”
You can easily master other functions on your own. If you encounter any difficulties, write in the comments. If necessary, I will be happy to supplement the article with the material you need, and also give personal advice By specific cases even by . The materials provided on this blog are intended to make your work on your PC easier. You will find many more here useful instructions for your computer activities. Meet me at next page, Colleagues!
It should be said right away that there are many ways to carry out this operation. The choice depends on the purpose and B in this case We will create a bootable flash drive with the Windows operating system. Next you will find out using the “WinSetupFromUSB” program.
Preparation
Since we will be recording Windows, we will therefore need its image. Where you download it from does not matter. The most important thing is that you use a fully working operating system that has already been tested on other devices. You can burn not only an ISO image, but also an already unpacked version of it. It is recommended to use a flash drive with a capacity of at least 2 GB. Burning an ISO image to a flash drive will take you about 30 minutes (it all depends on the parameters of your computer). The program "WinSetupFromUSB" can be downloaded from world wide web for free.
Conclusion
The question of how to burn an ISO image to a flash drive is often asked on various forums and portals. Everyone offers their own tools, programs and, accordingly, instructions. I have offered you my own method that will help you make your own bootable flash drive. I hope you understand how to burn an ISO image to a flash drive.
Sometimes there is a need to burn an ISO image file to USB flash drive, it's much more convenient than holding a CD or DVD disc, since disks often fail, especially in the last couple of years, the quality of such disks leaves much to be desired.
In this article we will look at how Burn the ISO image to a USB flash drive. There are many programs for writing a file image to a USB flash drive. We will consider the simplest of them. We will record the image using the program UltraIso. In my opinion this is the simplest way. The program is paid, but you can easily find a free version on the Internet.
So we have an image file with ISO extension And installed program UltraISO.
Launch the program
In the program that opens, select the tab in the upper left corner "File"
In the window that opens, select “Open”
Select the image file that we want to write to the flash drive. For example, I took ISO file recently released Windows 8.1. Double-click on it with the left mouse button
The file is open. Now in top panel select a tab
In the tab that opens, select the line "Record image of a tough disk"
The recording window opens. Here we select our flash drive.
Before you burn an ISO image to a flash drive, you need to format it.
Everything is ready, the flash drive is formatted. Press the button "Record"
User note: in general, there was an error in this review and here is what: in normal mode UltraIso will automatically reformat to fat32 and it doesn’t matter what the file system was before ntfs, in order to stay ntfs you need to select in ultraiso ExpressBoot, then click on ExpressWrite, as a result, when you unpack the image into a flash drive, the file system will be unchanged. You don’t need to click on the record, but a little higher.
A hint window pops up. Remember that when writing, all files on the flash drive will be erased, so if you have anything there, copy all the files to your computer in advance.
The recording process has begun.
The recording lasts approximately half an hour.
Here is our flash drive with Windows image 8.1 is ready. Now you can use it to install the new Windows 8.1 operating system on your computer.
Advantage of installing an operating room Windows systems from a flash drive is that installation time is significantly reduced compared to a DVD. The reason for the slow installation may be either the CD or DVD ROM. So a USB flash drive is a very good alternative.
Note! If the program is not fully functional, for example ultraiso does not offer the choice of recording to USB. Then you just need to run the program as an administrator. This is done by right-clicking on the program shortcut and selecting the appropriate action!
No similar posts
Sometimes there is a need to write an ISO image file to a USB flash drive; this is much more convenient than keeping a CD or DVD disc, since discs often fail, especially in the last couple of years, the quality of such discs leaves much to be desired.
In this article we will look at how Burn the ISO image to a USB flash drive. There are many programs for writing a file image to a USB flash drive. We will consider the simplest of them. We will record the image using the program UltraIso. In my opinion this is the simplest way. The program is paid, but you can easily find a free version on the Internet.
So we have an image file with an ISO extension and the UltraISO program installed.
In the program that opens, select the tab in the upper left corner "File"
In the window that opens, select “Open”
Select the image file that we want to write to the flash drive. For example, I took the ISO file of the recently released Windows 8.1. Double-click on it with the left mouse button
The file is open. Now select the tab in the top panel
In the tab that opens, select the line "Burn hard disk image"
The recording window opens. Here we select our flash drive. Before you burn an ISO image to a flash drive, you need to format it. Everything is ready, the flash drive is formatted. Click the button " Record"
A hint window pops up. Remember that when writing, all files on the flash drive will be erased, so if you have anything there, copy all the files to your computer in advance.
Often when your computer breaks down you have to use a bootable flash drive. With its help you can get to the recovery partition, run command line or edit the registry even if the system itself does not start or does not respond. In this way, you can solve many startup problems and avoid reinstalling the system, and if this does not help, then the same flash drive will be useful for reinstalling the OS. So it doesn’t hurt to have a bootable flash drive at home in reserve.
Usually, bootable flash drives are made from an iso image. This is a file that represents copy optical drive . You can unpack it using conventional archivers and work with it, you can use special programs, which are capable of emulating the operation of optical drives and working with a file through them, there are also many applications that will allow you to write an image to another medium, which will be discussed in this article.
Preparing a flash drive
For starters, it's worth transfer from flash drive all information, because during the recording process, all data will be deleted. If you don’t mind losing information, you can leave it on the drive; in most cases, the programs themselves will delete it during operation. You can also format the flash drive, this is required to record some images, it's worth finding out what type file system ntfs or fat32 is required, and recode the flash drive to it.
Third Party Applications
This section will list the utilities that are best used to create a bootable drive.
Ultra ISO
It is better to download the program from the official website; others may contain versions with malware or with additional files, link to the page https://www.ultraiso.com/. After downloading, you will need install file, there is nothing complicated about it, all actions are performed using the usual installation wizard. After starting the program, you should click on the file - open, and then specify the path to the downloaded image. Then, the window will appear full list files. Next you need to click on Bootstrap - Burn a hard disk image.
After which a window will open in which you should select drive, and then all you have to do is click on record and wait for the process to complete.
Rufus
It is also better to download this program from trusted sources; you can download it from the link https://rufus.akeo.ie/?locale. Unlike the previous utility, this one specializes only in creating boot and multiboot drives. IN top line you should select the drive to which recording will be made; in the next paragraph you need to specify partition scheme, which will depend on the system being installed. In the bottom block you should definitely note “ Create boot disk
", indicate the downloaded iso as the source.
The remaining parameters can be left as default.
WinSetupFromUSB
You can find the utility at http://www.winsetupfromusb.com/downloads/. The program itself is quite easy to understand and use. All you need to do is indicate the drive, check the box below it if this is the first image to be recorded, then check the box for the required system version and indicate the path to the downloaded element. Further required click ongo and wait for the process to complete.
Windows 7 USB/DVD Download Tool
The official utility, which can be obtained directly from the developer’s website https://www.microsoft.com/ru-ru/store/b/home?rtc=1. The program is easy to use, in the first window you need to specify the file, in the next you need to specify the drive, and then you just have to wait for the recording.
Daemon Tools Ultra
This application has many options for working with virtual drives and disk images can be downloaded on the official website https://www.daemon-tools.cc/rus/products/dtultra. After installation, all you have to do is click on tools, then on burn image, after which you will only need to specify the flash drive, image and select recording options that you can leave with default settings.
UnetBootin
A utility for creating bootable flash drives based on Linux, you can download it at https://unetbootin.github.io/. Here you should indicate the version of the system, after which the program will download it, or the path to the image, as well as the drive on which the recording will be made.
WinToFlash
You can download the program at https://wintoflash.com/home/ru/. In the first window, which is called the transfer wizard, you need to press only on further, and in the second indicate the image file and the path to the flash drive.
Possible faults
Some utilities refuse to work without NET Framework , usually, it is installed on every computer because many applications require it to work. If the user does not have it, then latest version You can download it from the Microsoft website, but you will have to search for the rest. The problem may also be a version mismatch, 64 bit systems may refuse to write to a flash drive if the action itself is performed in a 32-bit environment. In this case, you should try using a different image or another utility.