What to do if there is no GPS on Android. PPPS Below is “reference information” for those who received a device with a completely non-working GPS. It’s worth checking it - the reason may be that you have something different from what is listed below in your settings. Setting G

Yandex Navigator is confidently among the leaders in the ranking of navigation applications for mobile devices. A side effect of this popularity is large number difficulties when using. Let's look at the most common complaints and try to fix them.

Unfortunately, this is very vague information, which can be attributed to dozens of reasons, including the user’s inability to run the program and real-life geolocation failures in some areas. Therefore, let's look at the situation in more detail to highlight the various aspects of the problem, and not the trivial lack of knowledge about the operation of the smartphone.

In this material we will limit ourselves to the difficulties that occur when using navigation from Yandex.

The navigator cannot start correctly

The application was installed correctly, but does not even start: it displays error messages and crashes immediately after launch. The reason may be failures when installing the program on the smartphone.

By system requirements almost any modern apparatus supports Yandex Navigator, so the option with a lack of resources is extremely rare. This can be indicated by constant freezes and long pauses even before basic actions.

The smartphone may not be able to handle the application if it has less than half a gigabyte of RAM installed. For example, 256 MB is very little by modern standards.

As for the first case, you need to delete the program through the phone settings, and then re-install it. So, in Android OS you can use the Play Market. If the crash was due to an error during installation, reinstalling will fix the problem.

Why does the program need an Internet connection?

Yandex Navigator can also work if you first prepare the program for this mode. In particular, you need to download to your smartphone the very maps that will be used to display your location without access to the Internet. This can be done from the application itself. Open the “Download maps” section in the menu, then specify the required city. If you are lucky and there is a map, download it.

It is worth noting that Yandex maps on the territory of the Russian Federation, Ukraine and many other countries have very decent coverage, so there is a high probability that there will be no difficulties at this stage.

Before downloading, switch to WiFi, since some cards are large in size.
True, it still won’t be possible to completely remove the connection to the Internet, so formally Yandex Navigator really only works online.

The fact is that although the maps are stored in the smartphone, you still need a connection to plot a route and search in the immediate vicinity. To some extent, preliminary calculation of the route helps - then you can move along it without communication. One way or another, exchange via the Internet will be significantly reduced, and the speed of the program will increase.

Of course, without an Internet connection, the Navigator will not be able to download useful information, such as traffic information. Just in case, check: if they are not displayed, perhaps the traffic light image in the corner is currently gray. If so, click on it - the traffic light will be activated and will display the traffic situation in color. And a digital display is used to show traffic congestion from 0 to 10.

There is a route, but the Navigator does not track movement along it

First you need to make sure that receiving geodata is enabled.
Then check your Internet connection and its speed (for example, open a website or two in your browser).
If activated, the Internet is connected, but the program refuses to display the movement, try exiting the application and re-entering it.
If it doesn’t work, force stop it using a special button from the settings section where applications are shown (the procedure is almost the same for Android and iOS). Launch Navigator again.

If it refuses to drive again, restart your smartphone. Have you tried everything but to no avail? Reinstall the program. Although it usually doesn’t come to this, Yandex programmers have written a good application.

Let’s imagine that even such serious measures did not help. In this case it remains the hard way– stop using Yandex Navigator on this particular smartphone. Since it’s not destiny for them to work together, use analogues.

Voice search crashes

There are several options here:

The microphone may be broken.
Or the Internet connection speed is not enough.
Or maybe the surroundings are not quiet enough - the street is noisy or the music is blaring.
It's better not to use it voice search in a noisy environment.

Well, sometimes the Navigator, like other programs, may refuse to function without any apparent reason. Wait, he will come to his senses and start working. Or follow the recommendations from the previous paragraph.

Apple CarPlay Yandex Navigator. Solving a sound problem.

If Yandex Navigator does not work in Uber / Uber, video

What else can cause Yandex Navigator to malfunction?

If the current position is not displayed or changes suddenly, exit the application and enter again. Unfortunately, such failures are possible.

If the arrow indicating the direction disappears, or if you search for satellites for a long time and are periodically unable to maintain contact with them (especially on a long route) check the time settings, set the correct time zone.

For geolocation from satellites The time is also transmitted, and if it diverges greatly from the system time, errors are inevitable.

Occasionally, the program refuses to plot a route, citing the complete absence of a path between points - despite the fact that there is a road and you can drive along it. More often this happens abroad. Alas, the program is not omniscient, and accordingly, routes are not laid out everywhere.

Contact the developers, help improve useful software —

And sometimes there are reasons that in no way relate to the Navigator or satellites. There are several areas in the center of Moscow (in particular, near the Kremlin) where the application does not work. But this is not a mistake, but the foresight of the security services: special transmitters for the protection of strategic objects are interrupting satellite signal, giving out obviously incorrect data.

Conclusion

In the article, we looked at the main reasons that can lead to Yandex Navigator failures, whether on Android OS or another system.

Add your questions and comments about the program, we will discuss the features of its work with the whole world. Good luck on the road!!!

The GPS module in your phone allows you to use navigation apps, such as Google Maps, and location services. And a good signal is crucial not only for navigation, but also for augmented reality games like Pokemon Go. If you are experiencing problems with this on your Android phone, then check out our tips to help improve the GPS signal on your Android device.

What is GPS?

To know how to optimize the performance of the GPS module, you need to understand how it works. GPS stands for Global Positioning System, that is, the system global positioning. It was developed by the military, but later began to be used for civilian purposes. GPS originally used 24 satellites orbiting planet Earth, but the number has now increased to 31.

Your smartphone communicates with these satellites through a special antenna that is part of the hardware in most modern mobile devices. Naturally, the hardware is controlled by software through the driver. Thus, there are three sources of error for the GPS signal in a smartphone:

Number of available satellites at current location
The quality of the antenna that is inside the smartphone
Driver implementation in the Android operating system

Switch to High Precision mode

To receive better signal, you should prepare for the fact that your device's battery life will be lower than usual. It's a necessary sacrifice, but you'll still be able to change the settings back when you don't need them. precise definition your location. For example, when you play Pokemon Go. It's very simple, follow our instructions in the instructions below.

Open Settings, go to Location and make sure location services are turned on. If they are turned off, then click on the switch on the right top corner.

At the very top, under this switch, there is a menu with mode selection. Tap on it and make sure that the “High accuracy” option is selected. This means that the built-in GPS, Wi-Fi and mobile network will be used to determine your location. This may increase power consumption, but the detection accuracy will improve significantly.

Make GPS always active

To save battery power, the GPS module can be turned off when not in use. If, for example, you are playing Pokemon GO and at that moment you want to read a new message, then the GPS will turn off for this time.

One way or another, you can force it to always be active, but this is not difficult to do. You need to install one application from Google Play Market, and it will do everything for you. We recommend Connected GPS because it's the easiest to use. Keep in mind that this can be a real blow to the autonomy of your device.

Why might GPS not work?

With GPS Essentials you can diagnose the cause weak signal GPS. Problems may arise from hardware or software. On the main screen of GPS Essentials, find the “Satellites” item and go to it. The smartphone must connect to satellites available in Earth orbit.

If the phone has not found any satellites or cannot connect to them due to bad signal, then the reason for this may be interference from metal objects around you: the smartphone case or the module built into it simply does not work as it should. If the satellites have appeared but the GPS is still not working properly, then the problem is software and we recommend using the next tip on the list.

Clear GPS data

Sometimes your device gets stuck on some GPS satellites, even if they are not within range, which causes problems in the module's operation. This can be corrected using another application - GPS Status & Toolbox, which clears GPS data and the phone can reconnect to satellites from scratch.

Install this tool and then run it. Press the “Menu” button, where you need to select “Manage A-GPS state”. Next, you need to click the “Clear” button, and after completing this process, return to “Manage A-GPS state” and click on the “Download” button. That's it, after this the GPS module should work like new.

Buy an external GPS receiver

If the GPS on your smartphone still does not want to work or its accuracy is not enough for you, then you can try an external GPS receiver. It can be synchronized with your phone via Bluetooth and charged with the same charger, which comes with the smartphone. The only problem in this case is the cost of an external GPS receiver, since good model you will have to pay about 6,000 rubles.

Today I once again thought about the topic of bad GPS reception signal on my Chinese smartphone Jiayu G2. But, unexpectedly for me, the problem was solved in just a couple of minutes - the “Chinese” finds satellites within 20 seconds. Now let's talk about everything in order.

In October, I received a Chinese phone ordered from Aliexpress. The phone is excellent for the money, and everything would be perfect, but the GPS module found the satellites for a very, very long time, in about an hour, no faster. And this is with Wi-Fi turned on and A-GPS and GPS EPO assistance checked. This didn’t make me happy at all and I had to remember a useful post on the livejournal blog, the advice from which I used when setting up my first smartphone on Android. It came down to editing gps.conf auxiliary programs. This helped the “Chinese friend”, but after the first (and so far the last) reset to factory settings, GPS reception began to get even worse - I left it in the open air for an hour to search for satellites and no results. And today I started looking again for that useful post on the livejournal blog and came across an update in the post header:

"Fantastic!" I thought and immediately followed the link. Compared to the first post, this time even more specific actions were proposed, namely replacing the contents of the file gps.conf(you can find it along the way /etc/gps.conf, must be root-rights) to the following settings:

NTP_SERVER=ua.pool.ntp.org
NTP_SERVER=0.ua.pool.ntp.org
NTP_SERVER=1.ua.pool.ntp.org
NTP_SERVER=2.ua.pool.ntp.org
NTP_SERVER=3.ua.pool.ntp.org
NTP_SERVER=europe.pool.ntp.org
NTP_SERVER=0.europe.pool.ntp.org
NTP_SERVER=1.europe.pool.ntp.org
NTP_SERVER=2.europe.pool.ntp.org
NTP_SERVER=3.europe.pool.ntp.org
XTRA_SERVER_1=/data/xtra.bin
AGPS=/data/xtra.bin
AGPS=http://xtra1.gpsonextra.net/xtra.bin
XTRA_SERVER_1=http://xtra1.gpsonextra.net/xtra.bin
XTRA_SERVER_2=http://xtra2.gpsonextra.net/xtra.bin
XTRA_SERVER_3=http://xtra3.gpsonextra.net/xtra.bin
DEFAULT_AGPS_ENABLE=TRUE
DEFAULT_USER_PLANE=TRUE
REPORT_POSITION_USE_SUPL_REFLOC=1
QOS_ACCURACY=50
QOS_TIME_OUT_STANDALONE=60
QOS_TIME_OUT_agps=89
QosHorizontalThreshold=1000
QosVerticalThreshold=500
AssistMethodType=1
AgpsUse=1
AgpsMtConf=0
AgpsMtResponseType=1
AgpsServerType=1
AgpsServerIp=3232235555
INTERMEDIATE_POS=1
C2K_HOST=c2k.pde.com
C2K_PORT=1234
SUPL_HOST=FQDN
SUPL_HOST=lbs.geo.t-mobile.com
SUPL_HOST=supl.google.com
SUPL_PORT=7276
SUPL_SECURE_PORT=7275
SUPL_NO_SECURE_PORT=3425
SUPL_TLS_HOST=FQDN
SUPL_TLS_CERT=/etc/SuplRootCert
ACCURACY_THRES=5000
CURRENT_CARRIER=common

These settings are designed for residents of Ukraine, but for residents of Russia they are very easy to adapt by replacing ua.pool on ru.pool.

On my own behalf, I can add that I use the GPS Status application, and after rebooting when I first launched the application, I reset the cache data: call up the menu in the program, then select Tools, there Manage A-GPS state and click Reset and then Download.

I take my hat off to the author of the original post, dear mechanicuss. His advice helped not only me, and can help many more sufferers.

That's all. Clear skies and a stable signal from space to everyone.

04.10.2018

Mobile devices and tablets are incredibly easy to use and have the widest functionality, allowing them to replace many other devices with a narrower specialization. Thanks to the presence of a GPS module, the gadget is able to establish communication with special satellites, thanks to which it becomes possible definition location of the device, as well as navigation on maps.

Problems with GPS

Quite often you can encounter a situation where GPS does not pick up on Android. This greatly limits functionality smartphone or tablet and makes their use less convenient.

Since there are two GPS technology connections, it is advisable to understand their differences. The classic version involves establishing a connection with satellites, with the help of which the coordinates of the device are determined. A GPS involves, in addition to connecting with satellites, also connecting to cell towers, which allows you to determine the user’s location more accurately.

Despite all the differences, both of these technologies are characterized by the same reasons that prevent correct operation. These include:

Incorrect connection setup;
The GPS module is faulty;
Surrounding objects are interfering with the connection or the user is indoors.

The last point is especially important, since novice users quite often forget about the features of a satellite connection, which certainly requires the absence of obstacles in the signal path.

Troubleshooting

Before checking the functionality of the module, it is recommended to check whether it is enabled on the device at all. Some users who are not familiar with the operating features of Android smartphones quite often disable the module itself or the reception of geo-data, which makes establishing a connection between the satellite and the gadget impossible. Some applications remind you of disabled functions, allowing you to quickly restore normal work GPS.

IMPORTANT! If the module has lost its functionality, then the most reasonable option is to contact service center, since it is not possible to eliminate such a malfunction on your own.

In some cases, if the connection settings are not configured correctly, you can solve the problem. The same applies to situations where, after any changes in the settings, the device module has lost its functionality.

Some owners of Android smartphones often encounter the problem that the GPS module cannot catch or takes a very long time to catch GPS navigation satellites. This mainly happens with phones that were brought from China or purchased from Chinese sites such as Aliexpress and they were not fully customized to Russian conditions.

The first thing we should do is go to the settings of the smartphone and go to the tab My location. Turn on GPS and check the boxes opposite, By GPS satellites And By network coordinates. If you have more additional options settings, such as EPO parameters then put a tick in front of the item, go down to the bottom and press the button download.

Next we need to go to the engineering menu, you can find out how to do this from the article “Engineering” Android menu". In the engineering menu we go Location - Location Based Service - EPO and bet against the parameters Enable EPO And Auto Download checkboxes, if you don’t have these parameters, then they are by default and hidden from your eyes.

We return to Location and go to the section YGPS and on the tab INFORMATION press the buttons sequentially fuii - warm - hot - cold And AGPS restart This is done to reset the old almanac, and in order for us to record a new almanac, we go to the tab NMEALOG and press Start to record a new almanac.

Go to the tab SATELLITES and we see that we have several red satellites on the radar. After some time, from 5 to 30 minutes, some of the satellites should turn green, and signal strength scales will appear below, this means that your phone has established a connection with these satellites. You need to catch satellites on the street and preferably away from houses, since indoors the signal is extinguished and it is almost impossible to catch them.

If after a while the connection with the satellites has not been established, then the problem lies deeper and in order to fix it, you will need root rights on your smartphone. How to get root We read the rights in the article “Opening root rights in Android”. Rights root we need to edit the file GPS.conf. So using file manager which works with root(I used Root Browser) go to the root directory of the phone and look for the file at the following address system - etc - gps.conf. By using text editor open the file gps.conf and look at what’s there, this file stores the addresses of the satellite servers, but for some reason it turned out to be empty for me. If yours is also empty or there are some addresses of other countries, then we change the contents of the file to the settings we need, save, close and reboot our smartphone.

NTP_SERVER=ru.pool.ntp.org
NTP_SERVER=0.ru.pool.ntp.org
NTP_SERVER=1.ru.pool.ntp.org
NTP_SERVER=2.ru.pool.ntp.org
NTP_SERVER=3.ru.pool.ntp.org
NTP_SERVER=europe.pool.ntp.org
NTP_SERVER=0.europe.pool.ntp.org
NTP_SERVER=1.europe.pool.ntp.org
NTP_SERVER=2.europe.pool.ntp.org
NTP_SERVER=3.europe.pool.ntp.org
XTRA_SERVER_1=/data/xtra.bin
AGPS=/data/xtra.bin
AGPS=http://xtra1.gpsonextra.net/xtra.bin
XTRA_SERVER_1=http://xtra1.gpsonextra.net/xtra.bin
XTRA_SERVER_2=http://xtra2.gpsonextra.net/xtra.bin
XTRA_SERVER_3=http://xtra3.gpsonextra.net/xtra.bin
DEFAULT_AGPS_ENABLE=TRUE
DEFAULT_USER_PLANE=TRUE
REPORT_POSITION_USE_SUPL_REFLOC=1
QOS_ACCURACY=50
QOS_TIME_OUT_STANDALONE=60
QOS_TIME_OUT_agps=89
QosHorizontalThreshold=1000
QosVerticalThreshold=500
AssistMethodType=1
AgpsUse=1
AgpsMtConf=0
AgpsMtResponseType=1
AgpsServerType=1
AgpsServerIp=3232235555
INTERMEDIATE_POS=1
C2K_HOST=c2k.pde.com
C2K_PORT=1234
SUPL_HOST=FQDN
SUPL_HOST=lbs.geo.t-mobile.com
SUPL_HOST=supl.google.com
SUPL_PORT=7276
SUPL_SECURE_PORT=7275
SUPL_NO_SECURE_PORT=3425
SUPL_TLS_HOST=FQDN
SUPL_TLS_CERT=/etc/SuplRootCert
ACCURACY_THRES=5000
CURRENT_CARRIER=common

Next, you will need to repeat all the manipulations with the engineering menu and on the tab SATELLITES Let's see how our smartphone catches satellites. All the above actions helped me and the phone immediately began connecting with 6-10 satellites.

To comment, log in or register!

Many owners of phones running the Android operating system are faced with a problem when the built-in GPS module refuses to find GPS satellites or finds them but cannot connect. There may be several reasons for this behavior of the module, let’s consider the main ones:

The parameters for connecting to satellites are entered incorrectly in the settings file;

An A-GPS module is installed, which often does not find satellites on the phone on its own;

The module is not working.

I would like to look into the problem with the A-GPS (Assisted GPS) module, since Chinese phones that have it in 98% of cases are now extremely popular and are pushing global brands out of the market.

How does A-GPS work?

The main difference from the standard GPS module is that it connects not only with satellites, but also with mobile operator towers, which significantly improves the quality of location determination. When this function is enabled, the phone often cannot connect to the phone itself. GPS satellites and he needs " Full restart", even if it was just turned on. This is not a problem with Chinese phones themselves, namely A-GPS module, which costs pennies compared to GPS, so it works accordingly. Let's figure out how to set up GPS on Android.

How to determine whether an A-GPS or GPS module is on your phone?

If you have a phone with two SIM cards and made in China, there is a 99.9% chance that you have A-GPS. But to make sure of this, you can go to engineering menu. This will begin the process of fixing the issue of a broken connection with satellites.

To enter the engineering menu, you need to dial the following number in your phone: *#*#3646633*#*#. If the combination does not work, you can try entering *#15963#* or *#*#4636#*#*, however, in this case your menu may be different.

After entering the phrase, you are automatically taken to the engineering menu and will see a window with the following content:

You need to move to the left, scrolling through the settings pages to the “Location” tab.

Now select the first option “Location Based Service”. If you have the A-GPS tab, then follow the further settings. Otherwise, this article will not help you much.

Setting up GPS on Android

If you have an A-GPS tab, go straight to it. You should have a window that looks like this:

Compare the settings with yours, adjust if necessary, according to the screenshots:

If everything is written correctly, you can go back one level to selecting the “Location” items and go to “YGPS”.

Here you see that your GPS module does not find satellites, or rather, it finds, but does not connect due to incorrect inclusion:

You need the "Information" tab. The main manipulations will be carried out in it.

As you can see, the status is “UNANVAILABLE”, and TTFF is stuck forever searching. No matter how long you wait, nothing will change.

The essence of fixing the eternal search is to do a “Full” reset, and then, after 2-3 seconds, click on “A-GPS Restart”. Those. you reset the frozen search process to zero, thereby overwriting all preset settings, and immediately reboot the module. Not having time to pick up the standard configuration (incorrect), the module with clean slate finds all satellites.

After 10-20 seconds, you will see satellite signals on the “Satellites” tab, and after another half a minute the module will successfully connect to them.

The search was done from the 1st side of the house, on the balcony, respectively; nothing was found on the second hemisphere. You will find all your companions on the road.

Navigation applications installed on smartphones with operating system Android allows users to plot driving, cycling or walking routes, as well as monitor their own location on the map.

Mobile devices with installed GPS/GLONASS chips are in particular demand among potential buyers. But, sometimes it happens that GPS on Android does not work. In this case, you need to figure out what the main cause of the breakdown is and how to configure the modules so that they correctly perform the tasks assigned to them.

The main reasons for GPS module failure

If GPS does not work on Android, you should check whether the navigation module in your phone is disabled. This mistake is most often made by novice users who have not yet fully understood the principles of operation. Android smartphones.

In order to cope with this problem, you should use your finger to slide down the top curtain, which hides various shortcuts and notifications. Find the “Location” item in the proposed menu and activate it. When it becomes active, its color will change to green, bluish and so on.

Activate GPS on Android to find your location

After the “Location” item becomes active, you can start launching the navigation program.

It is worth noting the fact that developers take into account the interests of users, so many popular apps report that geodata is disabled.

As an example, we can note the Navitel application, which informs users that they do not have a connection to GPS modules.

It may be that the user activated geolocation in the smartphone settings, installed all the necessary navigation applications, but there were no positive results.

In this case, the reason may be hidden in banal impatience. When starting GPS/GLONASS modules for the first time, you should wait at least 15 minutes. During this time, the smartphone will be able to process information about which satellites are active in a given area. Other launches of the navigation program will occur much faster.

A similar problem may arise if you arrive in another city or country with your phone turned off and decide to use geolocation. You should wait 10-15 minutes so that your Android smartphone can calculate its location. This behavior is called a “cold start”.

So, above are the main reasons why GPS does not work on Android. But they do not limit the list of all possible malfunctions. It is worth noting several more factors due to which GPS modules may not work:

The user tries to perform “ cold start” while the vehicle is moving. You shouldn't do that. You need to stop, get out of the car, preferably into the most open area, and try to activate again GPS modules.
GPS does not work on Android not only when traveling in a car, but also inside buildings.
There are certain areas where signal reception is difficult. This may be due to the presence of rocks, tall buildings, and so on in the immediate vicinity. In this case, you should find the highest possible area and try to find the satellites by climbing onto it.

If the navigation does not work after active attempts to configure it, then you need to seek help from professionals working in the service center. This state of affairs clearly indicates the presence of internal breakdowns. And also, if you don’t have time to go to a specialist service center, then try resetting your phone to factory settings.

You can check the quality of signal reception from satellites using GPS applications Test from Chartcross Limited. If the GPS chip is working and geolocation is turned on, a sky map will appear on the screen indicating the locations of active satellites.

How to configure the GPS module on a smartphone?

Many users are interested in how to configure GPS modules on Andrid. There are no specific settings options in this case. But, if you wish, you can experiment a little using standard methods detection. There are the following factors for the operation of location detection:

High accuracy. With this parameter, location detection occurs using all possible wireless modules. It uses not only GPS/GLONASS, but also Wi-Fi and a telephone network.
Economy mode. Location search occurs via mobile networks and Wi-Fi module.
Only GPS modules. As the name implies, location search occurs only with the help of satellites.

In order to specify the method used for detecting a person’s position in space, you should go to the “Settings-Geodata” menu. Don't forget to work with GPS navigation install functional and easy-to-use software. To do this, you can download from the network or use paid products leading world companies.

Conclusion

In conclusion, it is worth noting that if GPS does not work on Android, you should not despair. You may be in too much of a hurry to allow the app to communicate with satellites.

If the problem is not resolved after fulfilling the basic conditions, you need to contact the service center for help.

Modern gadgets are already so sophisticated that you can determine your location without resorting to GPS navigators anymore. Sometimes this is necessary for correct operation applications, sometimes to create the right route. When GPS doesn't work on Android, it becomes difficult. What could be the reason for this and what should be done to solve this problem?

Any device does not receive a satellite signal well or does not receive it at all if it is located indoors. Therefore, it is better to determine your location on the street. Ideally, the space should be free even from tall buildings and trees, so that the sky is completely open, so that nothing prevents the gadget from searching for a working signal and connecting to the necessary satellites.

Incorrect GPS setting

All devices are equipped with two GPS modules. One is a standard receiver, which can be enabled in the settings (General - Location - Mode). When choosing mobile networks or Wi-Fi device will determine location from towers without connecting to GPS satellites. This method is the fastest, but it does not always give an accurate result.

When you select the “GPS Only” mode, the phone or tablet will connect to the satellites, but this will take the device some time. In this case, it is advisable to be outside in an open area or at least put the gadget on the windowsill. It is for the operation of the second module that you need correct setting. How to check if the device receives a signal? To do this, you will have to download and install GPS Test, a diagnostic application.

After starting the program, select Update only in the AGPS settings, and Keep Screen On in Settings. Now you need to return to the main program window, the GPS test on your tablet or phone will begin. It is important that Wi-Fi and mobile data should neither be enabled in the Location settings nor currently in use.

If diagnostics show that the device does not find satellites, then you should check whether the GPS settings on Android are correct. How to set up GPS? To do this, you must first download any application that can process GPS signal. If it does not help, you need to check the settings of the COM port of the communicator.

Unsuccessful flashing

After not the most successful attempts to flash a gadget or specifically a GPS module, not only the system, but also simply its individual parts, for example, geolocation, may stop functioning. There is also a frequent cessation GPS operation on a Chinese device.

To correct this situation, you need to enable AGPS in the location and GPS settings. After this, you need to enter the engineering menu through the dialing window (the combination is different for all phones). If you can’t enter it, you will have to use any special program, but with root rights. Procedure in:

On the Satellites tab of the YGPS tab, check if there is a signal, i.e. does the phone or tablet even try to find satellites;
go to the Information tab and there, in order, press the buttons full, warm, hot, cold (this is necessary to reset previous settings);
on the NMEA Log tab, click start;

Navigation applications installed on smartphones with the Android operating system allow users to plot driving, cycling or walking routes, as well as monitor their own location on the map.

Mobile devices with installed GPS/GLONASS chips are in particular demand among potential buyers. But, sometimes it happens that GPS on Android does not work. In this case, you need to figure out what the main cause of the breakdown is and how to configure the modules so that they correctly perform the tasks assigned to them.

The main reasons for GPS module failure

Activate GPS on Android to find your location

After the “Location” item becomes active, you can start launching the navigation program itself.

It is worth noting the fact that developers take into account the interests of users, which is why many popular applications report that geodata is disabled.

As an example, we can note the Navitel application, which informs users that they do not have a connection to GPS modules.

It may be that the user activated geolocation in the smartphone settings, installed all the necessary navigation applications, but there were no positive results.

A similar problem may arise if you arrive in another city or country with your phone turned off and decide to use geolocation. You should wait 10-15 minutes so that your Android smartphone can calculate its location. This behavior is called a “cold start”.

So, above are the main reasons why GPS does not work on Android. But they do not limit the list of all possible faults. It is worth noting several more factors due to which GPS modules may not work:

The user tries to perform a “cold start” while the vehicle is moving. You shouldn't do that. You need to stop, get out of the car, preferably into the most open area, and try to activate the GPS modules again.
GPS does not work on Android not only when traveling in a car, but also inside buildings.
There are certain areas where signal reception is difficult. This may be due to the presence of rocks, tall buildings, and so on in the immediate vicinity. In this case, you should find the highest possible area and try to find the satellites by climbing onto it.

You can check the quality of satellite reception using the GPS Test application from Chartcross Limited. If the GPS chip is working and geolocation is turned on, a sky map will appear on the screen indicating the locations of active satellites.

How to configure the GPS module on a smartphone?

Many users are interested in how to configure GPS modules on Andrid. There are no specific settings options in this case. But, if you wish, you can experiment a little using standard detection methods. There are the following factors for the operation of location detection:

High accuracy. With this setting, location detection occurs using all possible wireless modules. It uses not only GPS/GLONASS, but also Wi-Fi and a telephone network.
Economy mode. Location search occurs via mobile networks and Wi-Fi module.
Only GPS modules. As the name implies, location search occurs only with the help of satellites.

In order to specify the method used for detecting a person’s position in space, you should go to the “Settings-Geodata” menu. Don’t forget to install functional and easy-to-use software to work with GPS navigation. To do this, you can download from the network free apps or use paid products from leading global companies.

Conclusion

In conclusion, it is worth noting that if GPS does not work on Android, you should not despair. You may be in too much of a hurry to allow the app to communicate with satellites.

If the problem is not resolved after fulfilling the basic conditions, you need to contact the service center for help.

Post Views: 68