What to do if an icon on your iPhone is missing and how to get it back? The main reasons why there is no sound on iPhone

iOS differentiates between "normal" audio playback (such as playing a song) and playback of an alert. So if there is no sound on your iPhone, run a few simple tests.

Check if music is playing

Open the Music app on your iPhone and play any song. Slide the volume control all the way to the right until full volume is reached.

If you hear music, but your iPhone is silent during calls, this indicates incorrect settings alerts. Here's how to turn on alert sounds (which includes your ringtone!) on iPhone:

1. Stop the music and return to the main system screen.

2. Open “Settings” and select the “Sounds” menu item.

3. Around the middle, you will see the “Call and Alerts” option.

4. Move the slider to the right. All sounds should now be audible.

Check if silent mode is turned on

Is your iPhone set to silent mode? Check it like this:

1. On the left side iPhone cases find the volume switches.

2. Use the “+” button to raise the sound volume. The phone should wake up from silent mode.

You can also use the "-" button to reduce the volume to the desired heights.

Check if external speakers are turned on

In the Center iPhone control Check if your smartphone can play sound through external speakers.

To do this, turn on “Airplane mode”. This will disconnect all connections to other devices.

If music was previously played through an external Bluetooth speaker or Airplay, it will be disabled.

After that, turn off airplane mode and re-pair between external speakers and phone via Bluetooth.

Restart your smartphone

The simplest tip if something isn't working is to turn off your iPhone using the power button on the top of the device and then turn it back on. The problem may resolve itself.

If your system has lost sound after a critical error, you can perform a soft reset or reboot your iPhone through iTunes.

Thanks to the built-in iPhone speaker, we hear voice call tones, SMS notifications, as well as the sounds of running applications and much more. The system speaker is also used to listen to music tracks in player mode. What to do if there is no sound on your iPhone? The problem may be software or hardware in nature. Let's try to figure out how to get the sound back if it suddenly disappears.

What could possibly happen to the iPhone?

• The speaker in it could break - this is a hardware failure that requires the intervention of specialists;
• Water could get into the smartphone - in this case, the absence of sound will seem like “flowers”;
• A software error may have occurred in the device - this is the most simple reason, which can be dealt with without any problems.

Let's look at the reasons for the lack of sound in more detail.

Restore sound by rebooting

Software errors occur quite often in smartphones - as a result, “slowdowns” are observed, incorrect operation applications, errors appear with the playback of individual multimedia files. Loss of sound can also be a consequence of some error. How to get rid of “glitches” and return functionality and “voice” to the iPhone?

The easiest way out of the situation is to send the iPhone to reboot. During the reboot process, the cache will be cleared, temporary files will be deleted, and the operating system will start again. If there were any errors in the system and applications, they should disappear. Therefore, after a reboot, the sound should be restored - wait until it starts operating system and try to extract some sounds from your smartphone (for example, start music player or some gaming application).

If you rebooted your iPhone 2-3 times in a row, but no results were obtained, try to get rid of the problem in other ways - they will be discussed further.

Understanding the volume control

In some cases, the sound in the iPhone disappears somehow one-sidedly - in applications it is present, but during a call it is absent. The opposite situation may also occur when there is silence in applications, but there is silence in calls. What to do? Try playing around with the volume control in running applications, and also check the status of the current sound profile - it is quite possible that in active profile The audio output is simply disabled.

If all else fails, and there is still no sound in the iPhone, we send the smartphone to reboot - sound settings will have to be reset, after which the sound will still appear.

Understanding applications

If the sound on your iPhone has disappeared, you should remember why the problem with playing it appeared. Usually problems do not arise just like that - they are preceded by some prerequisites. Therefore, you need to sit and try to remember after what actions the problems with sound began:

• You may have dropped or drowned your smartphone;
• You might have done something wrong in the settings;
• You might have installed some applications.

The last point is the most interesting - sometimes the sound disappears as a result of some software conflicts. And the conflicts themselves do not arise in the process correct operation individual applications. IN iPhone smartphones conflicts are extremely rare, since the platform is literally polished to the smallest detail. However, no one is safe from them.

If you suspect that the problem with no sound on iPhone is related to the installation of some applications, try uninstalling latest apps and reboot the device. Now you can check the correctness of playback system sounds and sounds in certain applications. If similar solution did not lead to eliminating the problem, we proceed further.

Checking the sound in headphones

In some cases, the problem of sound loss on iPhone may be related to headphones. Try connecting headphones to your smartphone and testing for sound. If there is sound in the headphones, that’s already good. If there is no sound, try to increase its level using the adjustment buttons. If after these steps the sound appears, we try to pull out the headphone plug - the sound should appear.

The manipulations with the headphones did not produce any results, there is no sound either in the headphones or in the speakers? This means that the root of the problem lies somewhere else.

Checking the speaker

What to do if there is no sound on your iPhone? If the headphones still have it, but the speaker is silent, then the root of the problem lies in a faulty speaker. Unfortunately, it is almost impossible to check it at home - you will have to go to the nearest service center and return the device for repair. Here it will be tested and checked, the speaker will be replaced, and then the repaired smartphone will be handed over to the client. What causes system speakers to fail?

• Moisture may have gotten into the smartphone - in this case, serious problems may arise. different problems, starting from speaker failure and ending total loss smartphone performance;
• The smartphone could have fallen or been hit - another reason for all sorts of problems. Impacts often provoke equipment failure and the appearance of microcracks. As a result, the functionality of individual nodes is disrupted. Including possible loss of sound;
• The speaker could have failed due to a manufacturing defect - another reason to visit a service center or have your smartphone repaired through the store where you purchased it (if the iPhone is under warranty).

It is almost impossible to solve the problem with a broken speaker yourself.– for self-repair you will need special knowledge and tools. Therefore, the solution to this problem should be entrusted to specialists.

Firmware update and iPhone restoration

Sometimes the problem with no sound on an iPhone can be solved by updating the firmware or resetting to factory settings. If there is an update available for your smartphone, connect the device to your computer, download iTunes and run the update. Although it does not affect user files, before carrying out the procedure, you should create a backup copy of important data. If everything goes well, then after updating the device you will be able to hear the sounds it makes.

You can also update the firmware or perform a general reset of the iPhone through recovery mode or DFU mode– in the first case, the operation occurs with saving user data, and in the second case, without saving. We have already written about this in our reviews, find the materials you need using the search.

Some iPhone users are faced with a problem where the sound on their device deteriorates or disappears completely. What to do in such a situation? There are several main reasons why the iPhone sound becomes quieter or disappears.

Volume control and receiver on iPhone

The first step is to try increasing the sound volume using the control on the device body. In addition, you should make sure that when you press the keys on iPhone screen The volume level scale appears.

Also, iPhone sound may not function properly if a headset is connected to the smartphone. In order to fix the problem, you need to perform a series of sequential actions. First, you need to unplug your headset from the headphone jack. If after this there is still no sound from the smartphone speaker, you should go to the Bluetooth section in the phone settings and turn off this data transfer format.

In a situation where the sound has disappeared, and the previous actions did not lead to results and did not help resolve the problem, you will need to perform a number of other operations. The iPhone receiver may not work correctly if it is dirty or clogged. To clean the device's receiver, you need to perform a number of steps.

The first step is to make sure that the iPhone receiver is not covered with a case or protective film. If the phone was purchased recently and still has the factory default protective film on both sides, it must be removed.

Then you need to check the receiver grid. If it is clogged, remove dirt and debris using a dry small brush with soft bristles. Now we need to try to implement voice call and turn on the speaker in loudspeaker mode. If the problem is not resolved, it is likely due to the quality of the received signal or the condition mobile network. To make sure of this, you need to try to make a call from another location.

Checking the receiver status

In situations where the sound disappears on the iPhone, and probable cause is the receiver or network status, you need to carry out the following steps.

1. The first step is to use the program " Voice recordings» and make a short audio recording.
2. Then you need to click the icon with the image of a loudspeaker. This will allow you to switch audio playback from your phone's receiver to its speaker.
3. Now you should click the “play” icon to listen to the recorded audio fragment through the device’s receiver.

If the audio recording is played back without problems, and the sound is normal (no interference, distortion, crackling), then the cause of the malfunction is probably the state of the operator’s mobile network cellular communication. In addition, in this case, the source of the problem may be voice mail facilities.

Reboot the device and update the software

Try to solve the problem bad sound or its complete absence is possible through. To do this, press and hold the “Sleep/Wake” button until a red slider appears on the smartphone screen. To restart the phone you need to move the slider from left to right. Then press the Sleep/Wake button again and hold it there until the Apple logo appears on the screen.

There are many reasons why your iPhone may become stuck in headset mode and stop playing sounds from the external speaker. In most cases, dirt or moisture gets into the 3.5 mm jack, but sometimes there is a software error. In this manual we have covered all the most effective ways solutions to this problem, regardless of what caused it.

Note: Solutions to the problem are listed in order of effectiveness. Move from the first method to the last and one of them will definitely help.

Method 1: Clean the 3.5mm jack

The most common reason that an iPhone is locked in headset mode is dust or dirt that has gotten into the 3.5mm jack. Solution in in this case- simple cleaning of the connector with any thin object, for example, a needle or toothpick.

There is no specific cleaning method. Carefully move the needle/toothpick in a circle inside the 3.5mm jack for 10-15 seconds and then blow through it. If there is no result, cleaning the 3.5 mm jack with a cotton swab dipped in alcohol may help. In addition, you should try to clean the connector using a folded napkin.

Method 2: Clean the power connector

A similar cleaning of the power connector can also be a solution to the problem. The method is the same - moisten a cotton swab/needle/toothpick in alcohol and use it to clean the power connector, be it an old 30-pin connector, or Lighting. Please note that the connector must be wiped thoroughly.

Method 3: Put your iPhone in the cold for a couple of minutes

This advice sounds like some kind of cruel joke, considering how negative the cold is, but the method really works, as confirmed by numerous reviews. An iPhone stuck in headset mode should be placed in a cool place for 2-3 minutes (no more). In winter, in this case, a balcony or just going outside is suitable; in the warm season, a refrigerator is suitable.

Method 4: Blow out the 3.5mm jack with a hairdryer

Blowing out the 3.5 mm jack with a hairdryer can help solve the problem. As with previous cases, there is no specific method for purging. The only thing to remember is that prolonged blowing with hot air can be harmful to the iPhone battery.

Method 5: Repeated connection of charging cable/headphones

Another method based on cleaning the charging connector and audio output. Even a needle is not able to reach hard-to-reach places in the connectors, but the connectors fill the entire connector, as a result - maximum cleaning. The principle of operation is extremely simple: connect the iPhone, and then connect the charging cable and headphones to the appropriate connectors about 10-15 times.

Method 6: Connect a Bluetooth headset/speaker

It also happens that the iPhone freezes in headset mode due to software error. They usually happen after installation new version iOS. In this case, connecting helps wireless headset or speakers and then turning off the headphones. The operating principle is as follows:

Step 1: Connect the headphones to your iPhone.

Step 2: Connect your Bluetooth headset/speaker to your iPhone to output audio.

Step 3: Disconnect your headphones.

Step 4: Turn off your wireless device.

Immediately after this, you can check whether the sound has returned to the speaker of your iPhone.

Method 7. Force reboot with headphones on

Also software problem can eliminate forced reboot iPhone with headphones inserted into the 3.5 mm jack. To perform a hard reset, you need to hold down the Home and Power buttons until the Apple logo appears on the screen.

It may also help:

• Sudden pulling of the headphone plug from the socket.
• Sucking dirt from the nest using a vacuum cleaner (

Hi all! In general, missing sound on an iPhone is not a very standard situation, since it certainly does not turn off by itself. However, there is no need to immediately prepare for the worst, because this phenomenon may be caused not only by any mechanical problems, but also software problems, which is much easier to solve. So, what to do and how to fix sound problems on iPhone, let's go!;)

Naturally, we won’t talk about such banal things as checking whether the vibration mode is turned on, the do not disturb mode () and whether the volume slider is turned up to maximum - this needs to be checked first. Let's get straight to the point and first we need to decide where there is sound and where there is not.

Here are some situations...

The sound on the iPhone is not completely gone - there is some sound in the headphones

Basically a partial loss sound signals, usually typical specifically for problems with software, but not in this case...

So, we insert the headphones into the iPhone and check. If there is sound in them, but when you pull it out, it disappears, plus when adjusting the volume, divisions are not added (it feels like the volume buttons do not work), then congratulations, you are lucky.

The whole problem is in the charging or headphone connectors. Either dust got into them, or they oxidized from contact with water (how to act).

And so iPhone image“thinks” that something is constantly connected to it - a docking station or the same headphones. By the way, this problem is more typical for older devices with a 30-pin connector - such as iPhone 4, iPad 2, etc. Why? It’s just that the connector itself is larger and, precisely for this reason, the likelihood of it getting dirty is higher.

What are we going to do? It's simple - in most cases, careful cleaning of the connectors helps.

Carefully! Using a toothpick or other object (preferably not metal, as the contacts can be scratched or bent), we clean out all the accumulated dirt or dust. After this, reboot the device. Then, just in case, we insert and remove the charger and headphones into the connectors several times.

By the way, if the contacts have oxidized (for example, after contact with liquid), it may happen that the device will have to be disassembled in order to clean not only the outside, but also the inside.

If you do not have such knowledge, I highly recommend contacting a service center, since self-repair, besides the sound, something else can be broken - for example, a cable Home buttons and get this one.

The sound has disappeared everywhere - the iPhone is completely silent

Here everything is a little more complicated, since the reason can be any - software or hardware.

1. everything from the phone (after taking care backup or ).
2. We update the firmware or, if it is already installed the latest, then simply boot the iPhone. Without restoring from backup copy! Restore later when you find out the reason for the loss of sound.
3. Let's check if the sound appears.

If after all these manipulations there is no success, then the problem is clearly “iron” and lies in... or anything!

Bottom cable, board, buttons, audio codec, etc. Therefore, without hesitation, we go to the service center. If the phone is under warranty and you didn’t do anything with it (dropped, hit), then after a while you’ll simply receive new device(). If there is no guarantee, then the situation is certainly worse, but not particularly critical. As a rule, repairs related to lack of sound do not take much time. And it's worth a fair amount of money.