How to set up channels on LCD. Methods for setting up digital channels

If you purchased new TV, changed operator cable television or broadcast type, then the first procedure you will encounter is setting up TV channels on your TV.

Depending on the method of signal reception, there are three main types of broadcasting:

ethereal- broadcast from a TV tower is transmitted to a regular antenna;
cable- channel packages from the operator’s distribution center are transmitted to subscribers’ apartments by wire;
satellite- the signal from the satellite is transmitted to a parabolic antenna (dish) and converted by the receiver.

In turn, terrestrial and cable television can be analogue and digital. The second has higher image and sound quality, but may require additional equipment in the form digital set-top box(tuner), especially when it comes to old model TV.

This article discusses automatic and manual tuning of analog channels on a TV (for cable channels everything will be identical).

Preparing the TV

Before you begin directly setting up channels, you should connect the TV to the broadcast source. At analog signal The cable from the antenna or cable television operator is connected directly to the antenna input of the TV (marked in the photo):

At the same time, it is worth separately considering the situation in which more than one TV is used in the apartment. In this case, a special antenna splitter is used for connection, which in most cases has two or three outputs:

How to tune channels from a regular antenna to several TVs?

People often complain that the channels on their TV in one room are worse than in another. Some of them are missing, and the rest have interference. The reason for this is incorrect connection. It is important that both TVs are equidistant from the main cable. Otherwise, the one that is located closer will take over most of the signal. Also, to connect two or more TVs, you should use a cable high quality, which is better protected from interference. Therefore, a standard cheap cable, which is usually offered by many cable television operators, will not work here.

How to automatically tune channels on your TV

This is the easiest way to set up and requires a minimum of effort and knowledge. The TV finds everything itself available channels and remembers them.

To switch to mode automatic settings you should enter the TV menu by pressing the MENU button on the remote control remote control. Depending on your TV model, this button may also be labeled HOME, INPUT, OPTION, SETTINGS, or special characters in the form of three longitudinal stripes, a house, an arrow in a square and others. More detailed information In this regard, contains instructions for operating and setting up TV channels. Some options for designating the menu button are shown in the photo:

Having entered the menu, use the navigation buttons to select the item “Channel setup” - “Automatic setup”. After this, indicate what type of television you are going to tune in (terrestrial or cable) and start the search process by pressing the ENTER/OK button. IN various models TVs, the names of the described menu items may differ slightly, so if you have any difficulties, check the instructions. An approximate menu screen might look like this:

In some cases, before tuning channels to ordinary antenna, you should additionally select the region of your location. To do this, in the settings menu, find the COUNTRY or REGION item and select the corresponding entry in the list.

Note. If all items in the TV menu are displayed on English, find the word LANGUAGE in the settings and select RUSSIAN.

After auto-tuning of channels is completed, a sorting menu may appear on the TV, with which you can arrange the found channels in an order convenient for viewing.

It is worth noting that when changing or adding transmitted channels on the part of the cable television operator, the setup must be done again.

How to manually tune channels on your TV

For all its apparent simplicity of automatic configuration, it has several significant drawbacks. Some channels may be repeated, have distorted image or sound. In this case, you should correct the situation manually. Here step by step instructions for manual tuning of TV channels:

In the “Channel Tuning” menu, use the navigation buttons to select “Manual Tuning” and press ENTER/OK.
Select “Program” and assign the channel serial number by pressing the number buttons on the remote control.
Select the color system used in your region: PAL, SECAM, NTSC or AUTO.
Select the sound system: 2.0 (stereo), 5.1, etc.
Perform a “Search” for the channel and, if successful, add it to the TV’s memory by pressing the “Save” button.
Repeat the same procedure for all required channels.

The manual channel tuning menu may look like this:

It should be remembered that all actions in the proposed instructions are confirmed by pressing the ENTER/OK button.

Frequently asked questions about setting up analog channels

Sometimes during the process of setting up channels certain questions may arise, some of which are discussed below.

How to tune channels on a TV without a remote control?

The process of automatic and manual setup in this case occurs in a similar way, but to access the TV menu, buttons located directly on its body are used.

Video tutorial: “Setting up digital channels on Samsung TV"

Instructions for setting up digital channels on Samsung TVs

Many people, before purchasing a TV, read a lot of information about it, so they are not buying a “pig in a poke,” but a device that everyone seems to know about. However, there are situations when, even with a powerful theory, the user cannot activate or deactivate some TV function or make settings. It is for such cases that there are computer forums where users can, fully demonstrating their solidarity, help each other with useful advice.

Attention!!! If you still encounter certain difficulties during setup, or you encounter some problems, you can always contact specialists at service center for Samsung TV repair.

IN lately Owners of Samsung TVs are increasingly asking the question - How to set up this device to receive digital television channels? It is for this reason that we decided to devote this article to this topic and tell how this mission can be accomplished. To begin with, we note that digital television gives people a unique opportunity to view numerous channels on a variety of topics. It is also worth noting that modern televisions Samsung have the ability to receive this signal automatically. In case your TV is not a new generation device, you can only enjoy watching digital channels if you connect a receiver to it. In this article we will look at how to properly set up digital television on a Samsung TV, which belongs to the penultimate generation.

It should also be said that to adjust digital TV channels, you will need to install additional devices, which will be able to receive and play these channels. As such devices, you can use a cable receiver that has the same DVB-T or DVB-C parameters. Please note that such a device must be separate from the TV. This receiver should be connected to the audio and video jacks of your TV. Modern Samsung TVs are equipped DVB-T tuners or DVB-C. In this case, it will be enough to just connect the cable to the antenna socket and configure certain configurations on the TV so that it can receive digital TV channels.

So, now let's move on to the settings themselves:

Take the remote control for your TV and press “Menu” on it.
After this, in the window that opens, you will need to click on the “Channel” item.

Then you select “Antenna” - “Cable”.

After that, click on the “Country” option and select the “Other” tab.

Then the system will ask you to enter a PIN code, if you have not changed it, then by default it will be standard - 4 zeros.
Next, go to the “Auto setup” section and select “Cable” again.

Then choose the type of channel you want.
After that, enter the following parameters: search mode (fast); network(auto); network ID (——-); frequency (674000 KHz); modulation (256 QAM) and transmission rate (6750 KS/s).

Once you have entered this information into the settings, simply click “Search.”

If you did everything correctly, you will have a pleasant viewing of digital programs.

Cable television operators today offer their customers a huge selection of channels. But sometimes it is necessary to adjust the broadcasting of channels in order for the TV package to work correctly.

Automatic channel tuning

After connecting the TV to cable TV, the provider company’s installer usually configures all channels independently. If suddenly for some reason the settings are lost, you can always return them to their places by automatic adjustment.

Go to the menu using the TV remote control.
Open the settings section.
Then select program/channel settings.
Select the “Automatic adjustment” section and start the process.

The program will allow you to very quickly set up channels on your TV and arrange them in order. However, the machine may make some mistakes. For example, the picture of some channels may be poor or some channels will be posted several times. To avoid this, use manual setting either all channels or several of them.

Manual channel tuning

The advantages of self-correction of channels are that you can adjust the picture and sound quality of each individual channel, arrange the channels in an order convenient for you. You can also remove channels you don’t need.

For automatic setup:

Use the remote control to go to the menu, then to the settings, then to the channel settings section and then select the “Manual tuning” item.
Start the process.
Having found desired channel, press OK on the remote control and adjust the picture and sound if necessary. The sound and picture correction menu is also usually located in the channel settings section.

If you do not need the found channel, then do not click OK, but simply continue searching until you find something that interests you.

When setting up satellite channels on a TV, the principle of operation will be approximately the same, except that you will first need to set up the antenna itself. You can read more about this in our article. Also in this article you will find information on how to configure satellite channels on your computer.

Keep in mind that sometimes providers can change the composition of their cable TV package without your knowledge. If you cannot find the channel you need, check with your service company to see if it has been replaced. this channel to others.

If suddenly you fail to cope with the task, you can always contact the office of the company that provides the services of a cable TV provider for help. They will send a technician to your home who will quickly solve the problem. In some companies, such a service will be free of charge, while in others they will still ask for payment. In the latter case, make sure that you are given the appropriate receipt.

Our company adjusts all parameters and Samsung TV setup all modifications. Setting up both modern liquid crystal and plasma and CRT television models is carried out throughout Moscow and in the immediate Moscow region. The work is carried out by experienced and qualified craftsmen.
We know how to set up samsung tv. Organized for your convenience.

Samsung TV manual 6 series

Antenna connection terrestrial or cable signal, is made by connecting an antenna cable with a resistance of 75 Ohms to the socket on the Samsung TV "Ant."
HDMI connection. To receive best quality digital image, By Samsung TV instructions, it is recommended to connect a Blu-Ray player, digital satellite or cable TV set-top box, game console, laptop via high-speed HDMI cable into one of the HDMI sockets on the TV.

Connecting the CI Card Adapter. To connect or disconnect the card, you must turn off the TV. You need to remove the protective sticker from the Samsung TV, insert the CI card adapter into two holes on the case near the COMMON INTERFACE port. Press the adapter until it clicks. Install a CI or CI+ card into the adapter. Map required for viewing paid channels digital television.
Network connection Samsung Internet TV provides access to online services and allows you to update software. Wireless connection is provided using a standard wi-fi router to which the TV is connected. Wired Internet The connection can be made by connecting the Samsung TV through the LAN port on the back wall directly to the cable local network or through an external router.

Contains
on the main remote control buttons
Braille dots for visually impaired people.

Purpose of the remote control buttons for a Samsung TV:
TV button- turning the TV on and off
STB button- turning on and off the TV set-top box.
Source button- Select input sources.

Button 1,2,...,9,0- direct access to channels.
TTX/MIX button- selection of teletext values.
MUTE button- Temporary mute.

P button- Switching channels.
+/- button- Volume control
SMART HUB button- Display of Smart applications.

MENU button- Open the OSD menu.
GUIDE button- Display of the electronic TV guide.
TOOLS button- Selection of frequently used functions.

INFO button- Display information on the screen.
RETURN button- Return to the previous menu.
EXIT button- Exit the Samsung TV Menu.

SEARCH button- Call up the search window.
KEYPAD button- Virtual keyboard
E-MANUAL button- Call up the user manual.

P.SIZE button- Change the image size.
AD/SUBT button- Audio descriptions\Subtitles
BACK button- return to previous level
Control buttons- viewing videos, photos, audio recordings

Colored buttons- access to special functions some menus according to the on-screen instructions.

You can download it on our website
location and designation of remote control buttons, as well as instructions and

First time setup

When you turn it on for the first time, a window appears on the screen: primary Samsung TV setup. Here you can, using the Samsung TV remote control, select the menu language, search television channels, set up an Internet connection. You can perform this procedure later by clicking the System\Settings option in the Samsung TV Menu.
Samsung TV uses a password to system settings. The default password is 0-0-0-0. If you entered a different password and forgot it, you should recovery Samsung password . To do this, turn off the device using the Samsung TV remote control, and in standby mode, press MUTE-8-2-4-POWER. The setup will take place Samsung TV to the password value 0-0-0-0.

Samsung CI CARD adapter what is it

Samsung CI CARD adapter what is it? - this is a connector on the side of a Samsung TV (it is also called a pcmci card slot), which is used to install a decoding card for paid digital satellite or cable television. Such a card, installed in the CI CARD card adapter of a Samsung TV, allows you to do without the additional receiver required to watch digital channels on older model TVs.

Why do you need an infrared adapter cable for a Samsung TV?

Ir out on samsung tv what is it? Output connector ir out used to connect the included IR transmitter adapter for controlling external devices.

To control external devices connected to it, such as a digital television receiver, disc player, home cinema? ? This way you can control your TV and other devices from one remote control, using it as a universal one.
To do this, you need to connect the included infrared adapter cable to the IR OUT output of the TV, and place the transmitter within 10 cm of the receiver of the external device. Signals from the television remote control will be processed in the Samsung TV, converted and sent through a cable to the transmitter, which will work as an infrared remote control for an external device.
Turn on external device and TV. Using the TV remote control, select SOURCE\Settings in the Menu universal remote control Remote control at the top of the screen. Follow the instructions on the TV screen and the universal remote setup process will be completed.

How to set up a Samsung smart TV for digital television

How to set up a Samsung smart TV for digital television:
Setting up digital television on a Samsung smart TV is done by sequentially selecting Settings - Broadcast - in the Menu. Additional settings- Manual tuning - Digital channel tuning.
Select Create Search to get started automatic search digital television channels and save them in the TV memory.

Answers to questions on Samsung TV

Setting up digital TV on Samsung UE32F5020AKRU

How to set up digital broadcasting? 12/18/2018, Moscow

Setting up digital TV channels is only available when the “Source” parameter is set to “TV”.
In the Settings MENU section, you must select the DVB-T option to set up terrestrial digital television, or the DVB-C option to set up from your cable provider. In auto-tuning mode, all digital television channels available on the network will be found.

On the lower third of the screen the backlight does not work fully Samsung UE32F6330AK

The problem is this: on the lower third of the UE32F6330AK TV screen, the backlight either does not work or does not work fully. I wonder if the repair is advisable, because Google did not help in searching for similar problems. 10/21/2018, Solnechnogorsk.

Your backlight line is probably out of order. You need to replace it with a new one, or try to repair it. The question of the feasibility of repairs is decided on a case-by-case basis. It is best to contact an experienced craftsman who has the necessary “off-the-shelf” spare part, and who has experience in repairing LCD panels.

Check the Samsung UE32J5100AK cable connections

The TV was turned off. Then a sign appeared: “Check the cable connections and source parameters.” Press the SOURCE button on the remote control to select connected sources. Having done all this, nothing changes. 09/10/2018, St. Petersburg.

This situation is possible if the signal on the Samsung UE32J5100AK is lost from TV antenna. You'll need to contact your cable provider, or check your own receiving antenna if you're watching over-the-air television.

"Full Screen" image format is not available Samsung UE49NU7100

The TV function “full screen” image format is not available; 3 format changing functions are available, the rest are not. The TV shows an image in the center, around a dark frame of 10-15 cm. 08/15/2018, Sevastopol.

Changing the image format is changed by sequentially entering the menu: Settings / Image / Image size settings / Picture size
The picture size on the TV screen can be changed to: Standard 16:9, Custom, 4:3. Please be aware that supported image formats differ depending on the input source.
The Samsung UE49NU7100 TV has Automatic change image size. To enable it, go to Settings Menu / Picture / Image Size Settings / Wide Auto
Enabling the "Fit to screen" mode is set in the Settings Menu / Image / Image size settings / Fit to screen
When watching TV in Fit to Screen mode, the picture size can be selected according to your region. Supported image sizes may vary depending on country, and this function in this case, it makes it easy to select the format. This function may not be supported for some broadcast signal types.
Adjusting the image size and/or position: Settings / Image / Image size settings / Scale and position The following letter indicates the region of the model. E - Europe.
The next two digits of the Samsung TV marking indicate the diagonal of the TV screen. 32 inches (or 81 cm).
The next letter indicates the year the TV was manufactured. H - 2014 release.
The next number indicates the serial affiliation of the model.
The Samsung TV user manual and instructions are intended for series 6 models H6200 and H6230, which are similar in appearance and technical characteristics.

We live in the era of television and the Internet. Almost all of us have a TV or computer in our home. Watching TV shows or movies is a great way to spend time after a hard day at work. Thanks to scientific programs we learn a lot of new things about the world or history around us.

With the help of news, we can stay up to date with the latest events not only in our own city, but throughout the planet. And children will enjoy watching cartoons. All this is possible thanks to digital channels, and if these are not enough for you, then you can. And since, according to research, the majority of TV purchases come from Samsung, today we will talk about how to set up digital channels on this device.

The process of setting up digital channels

We will tell you how to set up these channels on almost all models produced since 2011. The algorithm is quite simple and in order to cope with the setup, you do not need to have any special knowledge or experience. Pick up the remote control and find the “Menu” on it. We will need the “Channel” section, in the vast majority of cases it is designated as a small antenna.

You will be required to enter a PIN code and immediately users find themselves confused, because they have never heard of any code before. If you did not perform any manipulations with the PIN code and did not make changes to this parameter, then simply enter 0000. In the “Country” section, pay attention to the “Digital channel” indicator; there should be the designation “Others”. IN " Analog channel» you should select “Eastern Europe” if such a designation has not been previously set. Now check if Antenna is set to Cable. Now in the “Cable search parameters” we configure:

“Channel frequency”, there should be a mark of 298 thousand;
in “End frequency” – 362 thousand;
Baud Rate should be 6952 and Modulation should be 256.

How to set up digital channels on a Samsung TV? Very simple. The entire process is as automated as possible.

Auto-tuning

Now we need "Auto-Tune". In “Channel Type” set “Digital”. The search mode should be “Network”. You can now search for channels. Once this process is complete, you will be able to see all the digital channels that can be viewed on your TV. In the Channel Manager you can sort channels as you wish.