• How to disable automatic computer startup. TimePC program for shutting down your computer on a schedule

    Modern technologies every day they reach such a level of perfection that any work process becomes automated. If you think about it, soon a person will no longer need to get up every day and cook breakfast for himself, since smart machines will be able to do everything for him. Take even into account the film Surrogates, where all movements, going to work, to clubs and other establishments, are carried out by robots, controlled by the mind of a person sitting in a chair at home. This may be a fictional story, and it will not happen in the next couple of years, but the fact remains a fact. And all this means that you can now turn on and off your PC and launch programs automatically. Those. While you are sleeping, your PC or laptop can turn on on its own and carry out the planned operations.

    How to automatically turn on a laptop or PC

    There can be many reasons for such an operation. Whatever it is, you are still here and want to know the solution to this problem. If it concerns a computer, then you should help will come task scheduler. I will not describe it here, since you can find many examples on the Internet, and there are no difficulties with it. As for the laptop, things are a little different here. Although I can’t say for sure about all models, since I only tested it on my laptop and encountered the same problem. In general, here are three working examples that will help when turning on your PC automatically:

    - standard task scheduler (available in every Windows OS),
    - Bios settings,
    - additional software.

    I’m omitting the first two examples because I haven’t tried them, but we’ll talk about the third below.

    Auto Power-on & Shut-down

    It’s very easy to schedule a laptop or PC to turn on using a convenient program called Auto Power-on& Shut-down. With its help, you can easily select the required start time for your stationary machine. Here is its approximate interface (it all depends on the version):

    The picture shows the Russian version, which is very convenient for those who are completely far from English. What is also attractive about it is that you can record any actions that you see on the monitor. Those. you can even record actions like: opening a browser, launching the necessary pages (although this can be done using startup, but not always), programs, etc. This is what creating any new task looks like:

    The laptop does not turn on, even after installing Auto Power-on & Shut-down, what should I do?

    This also happens, this is exactly the case that was written about above, and which I encountered. I installed the program on my PC, scheduled it to turn on at 5 am, and everything was fine. The program worked, the computer started. After some time I decided to install it on my laptop. I made the same settings and tested it in practice. However, the result was not positive, inclusion does not occur. The way out of this situation is not to turn off the laptop, but to hibernate. In this case, the program works with a bang. Well, then everything depends on your wishes. The program has many settings and all of them are available in the cracked version.

    Here is a simple and proven method that I use. If you have other options, don't worry, the main task is what? That’s right, efficiency, and everyone can have their own ways to achieve it.

    Wake on LAN technology must be supported by the BIOS and network card. Also, we will need special application, the functions of which allow you to send a WOL packet to a remote PC.

    Thanks to modern advances, you can turn on a remote PC not only from another computer, but also from your phone. It is also necessary to remember that turning on the computer remotely requires activity network card- it must receive power in standby mode.

    Preparatory actions

    First of all, you need to configure the BIOS and network adapter to wake up. It doesn’t matter what kind of network it is - built-in or external. Opening main program I/O, let's find the section responsible for power management - Power Management, for example.

    In this section you need to find the wake-up parameters.

    These parameters can go by different names, including Wake on LAN, PowerOn By PCI Card, WOL from Soft-Off, and so on. This option must be enabled.

    It is quite possible that you will need to enable the option in the picture below.

    To be more confident, it's best to familiarize yourself with all the wake-up options in your BIOS. After all, the computer can wake up from the TV tuner if the option to turn on via PCI-Express is enabled, and after pressing any key on the keyboard if the options related to the PS/2 port are enabled. In our case, we need a parameter associated with the PCI bus on which the built-in network controller is located.

    After setting up the BIOS, be sure to check whether the technology being discussed is supported by your Ethernet controller. We will need to enable the reception of the “magic” WOL packet so that the Ethernet controller is configured to wait for it. A WOL packet is a special Ethernet frame consisting of a sequence of bytes containing the MAC address of the network card. Having received such a frame, the Ethernet card generates a signal to wake up the PC.

    So, let's open the network control center.

    Let's open the properties of the network adapter.

    Let's move on to its settings.

    Let's turn it on WOL Package Magic and, if necessary, enable Energy Efficiant Ethernet, Termination Wakeup.

    Let's go to the power management tab, where this configuration should be.

    WakeMeOnLan

    Let's use a small program called Wakmeonlan for our purposes. This application does not require installation. After it starts, you need to scan the local network so that Wakemeonlan finds all network devices.

    It must work on a PC from which a WOL frame will be generated to turn on the remote PC. This is how Wakemeonlan scans:

    If during scanning the application does not detect a disabled at the moment computer, then it is possible to add it yourself.

    Let's add another device manually.

    You just need to enter the IP address of this device and its MAC into the form.

    Let's determine the addresses we need, for which we'll launch the command line.

    Let's run ipconfig with the /all key.

    The second way is to look at the “Adapter Status”.

    Open the Details window.

    Let's find the addresses that interest us.

    By adding required device, update the list.

    As you can see, we already have three devices.

    After adding, you can easily turn it on remotely by clicking the “Wake up Selected Computer” button.

    Let's use TeamViewer

    Completed pre-setting will allow you to launch the Wake on LAN function of an application such as TeamViewer. To remotely wake up your PC, you must ensure the following:

    Cable Internet connection.

    The computer is set to one of the modes: hibernation, sleep, or soft shutdown (Start and Shutdown).

    Installed TeamViewer.

    It's very important to turn off quick start in operating systems such as Windows 8 and 10. Your instances of TeamViewer must be associated with a program account. In this case, all devices must belong to the same LAN.

    In the application options tab, you need to activate the Wake-on-LAN function and configure the configuration by clicking the button of the same name. By selecting the option “Other applications in the same local network", add the TeamViewer ID of those devices from which you are allowed to wake up this computer. To create inclusion conditions using a public IP address, you will have to connect to dynamic DNS, which will also have to be configured on the network router. Let's consider all the steps in order.

    First of all, let's connect all computers to an existing account.

    Warning window about the need to connect to your account.

    Linking using the “Link” button.

    The established connection is displayed at the bottom.

    We will need to configure the Wake on Lan function.

    Check the box for other TeamViewer applications.

    Add the TeamViewer ID whose computer will send the WOL packet.

    You can wake up a remote PC from your TeamViewer account, where all devices linked to it are displayed. You just need to press a button in the form of a power button, which will send a WOL frame to the Ethernet card of the selected electronic device.

    Brief summary

    To turn on your PC remotely from another device, you need to configure the BIOS and Ethernet card. In the BIOS you will need to configure a policy for waking up the PC by a network signal, which is in an active state, provided by standby power. Also, you need to configure the Ethernet controller to receive WOL packets. Will need more special program to generate a WOL packet. Such a program could be, for example, Wakemeonlan or TeamViewer.

    Automatic launch of a particular program when the computer boots up is convenient function, and it’s worth using if available basic set apps that you always keep open. Some programs have their own settings in which you can set them to launch automatically every time new download Windows, others do not have similar functionality, but this allows you to do operating system. In this article we will look at how to disable startup programs using Windows and, if necessary, enable automatic start individual applications.

    Starting with Windows 7, the standard “Task Manager” of the operating system has a lot of useful functions and serves not only to terminate frozen programs and diagnose the load on computer components. In particular, the “Startup” item has appeared in the “Task Manager”, which displays all programs that automatically start when Windows boots. To get to this point, call the task manager by pressing the Ctrl+Alt+Del keys and select the “Startup” tab at the top of the window that opens.

    To disable startup of an application in Windows through the “Task Manager”, you need to right-click on a specific program in the list and select “Disable”.

    Note that Task Manager also shows the impact specific application on the operating system startup speed. You cannot add new programs to the Task Manager. automatic download when the computer starts.

    How to enable or disable autorun of programs through the registry

    The registry allows you to access almost any function of the operating system. In particular, through it you can configure a list of programs that are automatically loaded when Windows starts. To do this, you need:

    1. Press the Windows + R key combination on your keyboard and enter the command regedit;
    2. Next in the registry, go to the following path:
    HKEY_CURRENT_USER\ SOFTWARE\ Microsoft\ Windows\ CurrentVersion\ Run

    It should be noted that according to the instructions above, program startup parameters are set for the user on whose behalf the registry is currently being edited. If you want to set parameters for all users, in the left side of the registry editing window, right-click on the Run folder and select “Go to the HKEY_LOCAL_MACHINE section.” After that, follow the procedures to add or remove a program from the startup list.

    You can enable autoloading of individual applications via special folder. It is enough to place a program shortcut in it so that it starts automatically every time booting Windows. To go to this folder, just press the Windows + R key combination on your keyboard and enter the command in the “Run” window shell:startup.

    It should be noted that this folder does not contain all programs that are set to start automatically when the operating system starts. You cannot disable system applications through it.

    Friends, hello everyone! Today, purely by chance, I read one interesting setting computer together with uninterrupted source nutrition. If you remember, not so long ago we configured in the case when the UPS switched to battery power.

    And now we will do everything exactly the opposite. We'll set it up automatic switching on computer when power is applied. Moreover, in this case it doesn’t really matter what operating system is installed on the machine (Windows 10 or 7), because nothing depends on it.

    Here the whole point of the question lies in the correct BIOS settings. Yeah, who would have thought? So let's get straight to the point. After all, I dare to suggest that many users dream of autostarting their computer when voltage appears in the network.

    So, the first thing you should do is go to the parameters BIOS systems. How to enter it in detail. Further, depending on the manufacturer, the actions may be different, but the essence remains the same, so don’t worry.

    Specifically in my case, you need to open the section « Power Management Setup « and in the line « PWRON After PWR-Fail « specify the value shown in the screenshot below:

    Where “Power Off (Off)” - will leave the computer in the off state when voltage appears in the mains. “Former-Sts (Last State)” - will return the machine to the state it was at the time the network was interrupted. “Power On (Always On)” - will always automatically start the computer when the power supply is restored.

    That's all, we completely coped with the task. But let's dig a little deeper and further explore another interesting option called « Resume by Alarm « . To activate it, move the switch to « Enable « :

    This setting allows you to start the PC on a specific schedule, the so-called alarm clock. The trick is that in the graph « Date « you need to specify the day of the month, and « Time « hours and minutes. The start will take place at the specified time. As you can see, everything is very simple.

    Well, friends, automatic turning on of the computer when power is supplied has been studied in detail, and we can finish the article. Write your comments, ask questions, as they say, it will be more fun together. That's all for now and let's watch an interesting video.

    Turning your computer on and off using a timer is a useful function. Thanks to them, you can use your PC as an alarm clock or have it turn on automatically shortly before you arrive home. In the evenings you don’t have to wait for the download to finish large file. The computer will turn off on its own. Convenient, right?

    You can set up a timer to turn your PC on and off using Windows 7 in 5 minutes. Now we will deal with it, and also consider several third party programs designed for this purpose.

    Creating a timer via Task Scheduler

    Setting up a power plan

    Before you can create a timer, you must allow the system to wake up on a schedule. The feature is enabled in the power plan settings. By default it is disabled.

    • Launch Control Panel and click “Power Options”.

    • Select your plan and click the “Set up power plan” button.

    • Select “Sleep” – “Allow wake timers” from the list of options and set them to “Enable”. If you are creating a timer on a laptop, be aware that it may turn on while in the case and suffer from overheating.

    Create a computer shutdown timer

    • Launch Task Scheduler through the “Start” menu – All Programs – “Accessories” and “System Tools”. Or just type the word “scheduler” into the search bar in Start.

    • In the “Actions” column of the Scheduler, click “Create a simple task.”

    • First you need to give the task a name. Let's call it “Turning off the computer.” In the “Description” field you can write a few words about new task, but you can leave it empty. After that, click “Next”.

    • Next, we create a task trigger – repetition frequency. Let's select “Daily”.

    • We will set a date and time for the task to begin.

    • In the “Action” section, select “Run program”.

    • In the next window, select what we will launch: write in the “Program and script” line: C:Windowssystem32shutdown.exe, and in the “Add arguments” field enter the key -s. Click “Next” and “Finish”. The task has been created, all that remains is to check how the computer turns off.

    Create a computer turn-on timer

    • We launch the Task Scheduler again, but now select the “Create task” item in the “Actions” list.
    • On the “General” tab, give the task a name – let it be “Turning on the computer” and write a description (optional). In the “Configure for” drop-down list, select Windows 7.

    • On the next tab – “Triggers”, click the “Create” button. We configure the task execution schedule, mark “Enabled” and click OK.

    • Let's move on to “Actions”. Here you need to select a program, script or other action to be performed. If you are creating a timer as an alarm, select music file. In our example, we will create a message that will be displayed on the screen when the computer turns on.

    • On the “Conditions” tab, check “Wake up the computer to perform a task.” Here it is advisable to leave active the “Start when powered from the mains” and “Stop when switching to battery power” items – this will protect the laptop from accidental overheating.

    • On the “Parameters” tab, you can set additional conditions for executing the task. That's all. Now it is advisable to check how the created task functions: send the computer to sleep or hibernate and wait for it to turn on according to the timer.

    Programs for turning on and off your computer under Windows 7

    For those who are lazy and do not want to bother working with the Scheduler, there are many programs with similar functions - turning the PC on and off according to a schedule. Here are some of them:

    • Shutdown timer(OffTimer) – simple free application, requiring installation. To set up a schedule, in the only small window you need to set right time and press the arrow button. There is no function to turn on the PC here.

    • TimePC– a program with the function of turning the PC on and off, has a built-in scheduler, not similar to the Scheduler Windows jobs 7. Using TimePC is very easy - just create the desired schedule and select a program or action that will be performed when you turn on the computer.

    • Power Off A powerful multitasking tool that works without installation. According to the schedule that can be configured in this program, the computer turns on and off.

    All these applications are free, compatible with Windows 7 and in Russian.

    What to do if the PC does not turn on or does not turn off on a timer

    • Make sure you remember to enable wake permission in your power plan settings.
    • Check whether the “Task Scheduler” service is running on the PC - press the “Windows” + “R” keys, enter the command in the “Open” field Services.msc. Confirm your entry by clicking OK. In the list of services window that opens, find the one you need and right-click properties to make sure it is working. If it is stopped, turn it on.

    • Make sure your account has sufficient rights to create scheduled tasks. Create a schedule under an administrator account.
    • Check whether the created task is still there and whether the conditions for its execution have changed. Launch Task Scheduler, open Scheduler Libraries, find the task and view the data.

    • If your PC still won't turn on or off, the Scheduler log may help you determine the reason.

    If it is not disabled, all information about the execution of tasks and their errors is recorded there.

    Read more: