How to connect gaming headphones to your computer. How to connect headphones to a computer: tips and tricks

Headphones with a microphone are an accessory that allows you to hear and transmit sound with one device. You can communicate with your partner, hear what the interlocutor is saying and transmit your information to him via the microphone. Headphones with a microphone are mounted on the head and are especially popular among gamers who play online games where communication is a necessary element of the game. Also, a similar headset is used in everyday life. While walking, if your hands are busy, such a headset will be an ideal device for communication if someone calls your cell phone.

Connectors

Such connectors are called TRS (Tip, Ring, Sleeve - tip, ring, sleeve), but more often they are called “Jack”. There are several types of similar connectors, which are divided by size:

Also, similar connectors on a computer are divided by color: green– this is the headphone input, pink– microphone input, other colors are used to connect line output, additional speakers, etc.

Laptops sometimes use a combo connector. That is, only one input is installed, which includes the connection of both headphones and a microphone.

On laptops, this connector is usually not highlighted in color. Next to it is an icon depicting a headset.

On a computer, the audio input is located on both the front and rear panels (the front connectors sometimes need to be pre-connected to motherboard). Usually there is a green headphone jack on the left, and a headphone jack on the right. pink color for microphone.

How the plug works

The combination plug has four contacts. Each is responsible for a separate channel. The first is responsible for the microphone, the second is the general one, the third is for the right audio channel, and the fourth is for the left. Most often, this manufacturing technology is used in phones. To use it on a computer you need a special connector.

Double pole plugs with two circles along the plug connector refer to monaural devices or a microphone.

All types of plugs can be changed using adapters, and if you have a high-quality adapter, the signal quality is not lost.

How to connect headphones with a microphone to the back of your computer

There is a panel on the motherboard for connecting headphones and a microphone. It consists of three outputs (this is the minimum, there can be many more outputs). One of them, green, is responsible for the headphones, pink, for the microphone input, and blue, for any connected audio device from which recording will take place.

If the headset has an output one plug, then it is best to purchase a special adapter that will separate the channels. In this case, you can connect headphones to the green input and a microphone to the pink one. No drivers are required.

The second method involves purchasing additional external sound card. It will help improve sound quality when listening and will take up very little space - one flash drive. You can connect your audio headset to it. In this case, you will need to install the drivers that come with the kit.

The method is no different from connecting to a laptop - the same two inputs separated by color.

Connecting a headset via the front jack

Headphones are connected through the front connector, as well as through the rear. Only here everything is much clearer, since it is always located only two exits– green and red. For headphones and microphone. In the same sequence as written, we connect the headset.

In the case of a combination plug, the sequence is also identical.

If the headphone and microphone jack on the front panel does not work, then it most likely needs to be connected. You can see how to do this in.

Headset settings

Windows 7

When you connect headphones to a Windows 7 computer or laptop, if everything is configured correctly, the sound will automatically disappear from the speakers and appear in the headset, if the latter are connected to the front connectors. If this does not happen or there is no sound at all, then do the following:

Windows 8/10

In Windows 8 and 10, the procedure for setting up headphones looks like this:

• reconnect the devices to the front panel.

If there is no sound, then the sound card may be damaged or the headset wire may be broken. Don't forget to check your drivers.

It is worth noting that depending on the sound card manufacturer, the control window may have a different name and look, while the algorithm itself is identical, there are slight differences in the interface.

Microphone settings on headphones

Setup procedure in Windows 7 slightly different from newer versions of the system:

• on the " Levels» set the required balance. It is not recommended to amplify the microphone above 20 decibels, as excess background will appear;

The procedure in Windows 8 and 10 looks like this:

• click on the volume icon on the taskbar, and then go to “”;
• go to " Record" Select the microphone you want to configure;
• click " Set up microphone» and follow the instructions of the setup wizard;
• then right-click on the volume icon on the taskbar;
• go to “Recording devices”;
• click on the item " Record" and say a few words. Watch the indicators on the screen. If they appear, then the connection and configuration were completed correctly.

How to connect headphones from your phone to your computer

First of all, you need to check whether it works on another phone. If yes, then connect it to the rear or front panel into the green input. It is best to connect headphones through an adapter that will separate the channels into a microphone input and headphones, since the telephone plug is a combined one.

Headphones – personal listening device sound files. They are used in cases where playing music or other audio information through external speakers may disturb people around. To use these gadgets on your PC, you need to know how to connect headphones to your computer.

Connection via wire

Typically, sounds are played back from a PC to headphones using a sound card. The connection to the computer is made through connectors located on the rear wall of the system unit, but sometimes they are also placed on the front panel. Because the inputs are different colors and the plugs are colored similarly, so it’s quite difficult to make a mistake.

Rear Panel Connections

To connect headphones to the rear panel, the green plug (speakers) must be inserted into a connector of a similar color. If you need to connect an accessory with a microphone, otherwise called a headset (for example, A4Tech Bloody G500), then you also need to combine the pink (microphone) plug with the connector. This should be enough to listen to music.

Important! The absence of sound indicates that you need to check that the drivers installed for your sound card are up to date.

This is done as follows:

• Device Manager opens;
• select “Sound, game and video devices”;

• if the audio card is not displayed, new drivers are downloaded and then installed.

If after performing the manipulations the sound does not appear, you should perform the following actions:

• by clicking on the speaker icon in the tray (lower right corner of the monitor) select “Playback devices”;

• if the headset is not displayed, configure the display of disconnected devices;

• through context menu turn on the headphones and then set them as your default device.

Connecting to the Front Panel Connectors

Connection through the front panel is carried out in the same way.

If there is no sound, you need enable system level inputs, for example, through the Realtek HD Manager. This is done by the following steps: open the “Control Panel”, find “Realtek HD Manager”, select the “Speakers” tab (“Sound inputs and outputs” for Windows XP), click the folder icon at the top right, where you select “Disable detection of front panel jacks” "

Advice! If there is still no sound in the headphones, and you need to connect them specifically to the front panel of the system unit, you need to disassemble it and connect the connectors to system board manually.

Connection via USB port

To connect a headset (for example, SVEN AP-U980MV) via USB output, you should select one of the most convenient connectors and in the future use only it to prevent the settings from being reset.

Next you need to connect the headphones to the computer. If they do not have a microphone, the PC will recognize them as one device. If this is a headset, then variations are possible depending on the manufacturer - the device will be listed as one device or two. In the latter case one device will appear for main audio and the other for chats With voice communication, for example, Skype. After connecting, the PC will install the drivers. If this does not happen, you need to download them yourself.

Headset SVEN AP-U980MV

Connecting a wireless headset

Connecting a Bluetooth headset is carried out differently, depending on the adapter included in the kit.

Connection via supplied module

To connect a headset of this type, the Bluetooth adapter must be plugged into a USB port. If the automatic installation of drivers does not start, you will need to download and install them manually. Next, in the tray through the Bluetooth context menu you should select “Add a new device” and then turn on the headphones for pairing. Once detected, they will appear in the list of devices. In some cases, you will need to specify a password to connect (the default is “0000”).

Connection without adapter

If the Bluetooth module is not included, you can connect wireless headphones (for example, JBL E40BT or DENN DHB101) via Bluetooth adapter purchased separately. In this case, you will also have to download and install drivers for the purchased device yourself, if the OS does not prompt you to do this automatically when you connect it.

After installation, a Bluetooth icon will appear in the tray. By right-clicking, you need to select “Add a new device” and turn on the headset for pairing. As soon as the computer detects it, the name will appear in the list of found devices. To connect, you need to click on it and, if necessary, enter the password “0000”.

Nuances when connecting

Classic ways of connecting headphones to computers were considered. However, there are various variations of this process, for example when connecting to a laptop or when different versions installed OS.

Features of connecting to a laptop

Unlike PCs, laptops most often have a combined microphone and headphone jack.. Therefore, you can connect to them either headphones from your phone with a combined plug, or a headset for your PC via a separately purchased special adapter. This is the case when connecting a wired accessory. And for Bluetooth headphones, the connection is similar to the procedure described above through the included module, taking into account that you do not need to insert an adapter, since it is already built into the design of the laptop.

Features of connecting a headset with a microphone

If the user plans to use a microphone, you need to:

• open “Recording devices” through the speaker icon in the tray;
• configure the display of disabled devices if there is no microphone;
• turn on the microphone and set it as the default device;
• open “Playback”;
• set the headset as the default device.

Difference in connection via Windows 7, 8 and 10

If you don't take into account different path to access sound settings V different versions OS, setting up the headset in Windows 7 and 10 versions is very similar.

Note! Windows 10, like Windows 8, is better at automatic installation drivers, especially for sound cards or audio devices. On Windows 7, these steps are best performed manually.

Features of old, professional and gaming headphones

If you use professional headphones used on TV or radio stations, you will find that they are equipped with a plug larger size(6.5 mm). That's why to connect them you will need an appropriate adapter. The same difficulties may arise when trying to connect very old models with an ONTs-VG type plug. Adapters are also available for these.

Most headphones for gamers with a USB connection type are defined by the PC as two devices: for audio playback and for chatting. For them you need to separate tasks to eliminate mistakes. The primary (with the “Speakers” status) will be used by default, the secondary – as a communication device.

Setting up headphones

Adjusting the sound

To configure the sound, you need to follow a number of simple steps:

• open the speaker context menu in the tray;
• select “Playback devices”;
• open headphone properties;
• in the “Levels” tab, set the desired volume and adjust the balance;

• open “Improvements”, where there is an equalizer with fixed sound settings depending on the genre, the ability to turn on surround sound and other parameters;

• in the “Advanced” tab, set “Studio recording” with a frequency of at least 96000 GHz to ensure maximum sound quality;
• Click on the “Check” button to make sure correct setting sound.

Setting up speakers and headphones to work simultaneously

The easiest way to set up speakers and headphones to work simultaneously is purchase a splitter with one 3.5 mm input and two outputs, connect it to the system unit, and then insert the plugs into it. In this case, the sound will be played simultaneously in two devices.

If the user needs the devices to be connected to different connectors, but at the same time play sound simultaneously, the following steps should be taken:

• open “Control Panel”;
• select "RealtekHD Manager", "Speakers" tab, then " Additional settings devices";
• click “Mute rear output device”;
• Click “Merge input jacks of the same type”;
• commit the action by clicking “OK”;
• select the envelope icon at the top right;
• In the window that appears, check two boxes.

Now the sound will go simultaneously to both devices connected to different connectors.

Advice! Thanks to the described method, the user will be able to switch the sound from headphones to speakers and back without pulling the plugs out of the connectors, thereby extending their service life.

Checking the headset for functionality

If, as a result of connecting the accessory to the computer using the methods described above, sound is not played through the headphones, you should check them for serviceability. This can be determined connecting the gadget to a smartphone. If you hear sound, you need to look for a problem in your PC. The absence of an audio signal will indicate a breakdown of the device.

To diagnose the headset, you should connect the microphone from the headphones and use one of the online applications, for example MicTest. This service will ask you to provide access to the microphone and speak a few words into it. After this, a loudness rating will be given.

Possible connection difficulties

If the headphones are connected, the drivers are updated, but there is no sound, you need to first check the mechanical control on the headphones, and then the sound volume in the tray. Next, you should open the volume mixer through the context menu, where you can adjust all applications. You need to find an application that plays video or audio in at the moment, and make sure it's not muted or muted.

Thus, you can connect not only ordinary headphones to a PC or laptop, but also a computer or telephone headset. The main thing is to correctly connect the plugs into connectors of a similar color or with the appropriate designations. If there is no sound, you need to update the drivers and make a number of necessary settings. And if the headphones are in good working order, then high-quality listening to sound files is guaranteed.

The most popular headphones of 2019

Headphones JBL T500BT on Yandex Market

Headphones Pioneer SE-MS5T on Yandex Market

Headphones JBL Everest 310 on Yandex Market

Jabra Elite 65t headphones on Yandex Market

Headphones Sony MDR-7506 on Yandex Market

Interactive communication and game worlds are increasingly replacing reality, so for these purposes you can find many devices in stores that allow you to completely immerse yourself in the atmosphere of your favorite game, piece of music, or when talking on Skype. Today, almost everyone has music or gaming headphones that can be easily connected to a computer, laptop, tablet and phone.

Windows 7 OS is loved by users thanks to its stylish interface and advanced functionality. In addition, the “seven” independently installs drivers for most external devices, which significantly saves the time of those who like to surf the Internet. However, not everyone manages to produce correct connection headphones to the computer the first time, since it is not always clear which connector you need to connect the audio device to.

Connecting headphones

The headphone plug is a standard rod (jack) with a diameter of 3.56 mm. Moreover, it is equipped with two or three black stripes (contacts). The type of device differs from their number. Two rings indicate that this is just headphones, but if there are three contacts, then this is already a headset, that is, headphones with a microphone. In the latter case, there may be one or two plugs (one for the microphone and one for the headphones).

If you connect headphones to desktop computer, then you will find the corresponding sockets for the device on the front and rear panels system unit. Typically the ear jack is green and the microphone jack is pink.

Laptops often have a headphone/microphone combo jack.

Healthy! If you want to connect dual-jack headphones to a single-jack laptop, purchase an additional adapter or an external sound card.

Once you have connected your audio device to your computer, you can proceed to the settings.

Setting up headphones on a computer and laptop

If you are using headphones that work via USB, then as soon as you connect them, Windows will automatically start looking for drivers for them. If this does not happen or we are talking about a headset with a standard jack, then you will need to find software for the devices on the Internet on the website of the headphone manufacturer.

After that, you will need to go to the Start menu, go to Control Panel and find the Hardware and Sound tab and then select Manage sound devices.

Then in the window that opens:

• Go to the “Playback” tab.
• Make sure there are no red checkmarks or exclamation marks next to the playback devices that are displayed.
• Click on “Speakers”, then the “Configure” button will become active, which you need to click on.

• The window that opens should be set to stereo mode.
• Return to the Playback tab.
• Select required device(headphones) and right-click on it.
• In the window that opens, in the “General” tab, you can see data about the connection socket and other information.

Healthy! Sometimes Windows does not name the headphones according to the device model; in this case, you need to determine the ears by a method of elimination. For example, standard speakers in the case of ASUS laptop usually called Realtek High Definition Audio, and the Philips USB headset will simply be called “USB Audio Device”.

Advice! If the headphones are not displayed, right-click and enable the displayed disabled devices.

Also in the properties of the headphones, you can go to the “Advanced” tab, where you can make more “fine” settings. The Levels tab allows you to make the microphone quieter or louder. If you don’t know how to increase the volume in headphones on a computer, then in the same menu there is a sound level.

This is not the only way to make sounds quieter and louder. You can also open the master volume mixer by clicking on the corresponding icon in the bottom panel (on the right, next to the clock). Another way to answer the question of how to increase the sound in headphones is to go to the toolbar, where you need to go to “Hardware and Sound - Volume Settings”. In addition, many manufacturers equip headphones with a volume control.

In some cases, after all the settings, users are faced with the fact that Windows does not see audio devices or the sound does not come through the headphones. Let’s look at the most common problems.

Problems connecting headphones to a computer

If headphones do not work on a computer, there are many reasons, starting from the most basic. For example, you set the volume on your laptop, but on the control of the audio device itself, the switch is in the Min position. In addition, you need to make sure that the headphone plug is connected to the correct green jack. At the same time, it holds tightly and is installed all the way.

More serious reasons why headphones do not work on a computer may be:

• Malfunction of the connector for connecting to the sound card. To make sure that this is not the problem, try connecting any other headphones or speakers to this jack. If they don’t work either, it means the problem is in the connector itself. Most often, such problems arise if the sockets are located on the front panel of the computer’s “system unit”. Some manufacturers leave them completely unconnected during the assembly process of the system unit.
• Incorrect operation headphone drivers or lack thereof. Even if Windows kindly installed the software for the headphones without your participation, it is still better to download them yourself. If you don't have boot disk, then just visit the manufacturer’s website and select latest version drivers.
• Incorrect operation of sound card drivers. This problem is most often encountered by those who reinstall Windows 7 on their own. After updating the software of your computer or laptop, you must mandatory load all drivers going to specific model. In order to install them, you need to go to your PC manufacturer's website and download the latest updated drivers.

Before changing computer settings, it is recommended to test the headphones on another device, such as a smartphone or tablet. It is quite possible that you simply came across defective “ears”.

Speaking of using headphones on your phone. Smartphones usually do not require drivers to be installed. However, if you are tormented by the question of why the phone does not see the headphones, then it is possible:

• This model is not compatible with your phone.
• You need to purchase a plug connector.
• You forgot to turn on Bluetooth when it comes to connecting a wireless headset.

In conclusion

In most cases, Windows connects the device without any problems and the cause of apparent malfunctions is simple inattention. To make sure that you did everything correctly, it is recommended that you read the included set or download the instruction manual for the “ears” yourself, which will indicate all the features of the device.

To enjoy your favorite music or movie using a computer, you need to connect speakers or headphones (this is the first thing), and only then install drivers, if necessary, and then install necessary programs and launch the music or movie file accordingly. But everything is in order! Let's first connect everything we need to play sound, be it headphones, a headset or speakers. There are a lot of photos in the article, it won’t be difficult to figure it out.

Connect the speaker cable to the speaker/headphone jack, also called the line-out/speaker-out(line output), it is green. This is a familiar mini-jack connector, look at the photo:

The speakers also have a power cable that needs to be connected to the network, but some low-power models are not connected to the network, but to a USB connector, that is, they will not have the usual plug. I have on home computer just such speakers, look at the photo:

Also, right on the speaker there may be an input for connecting headphones (this is convenient if you need to quickly switch from speakers to headphones so as not to disturb other people in the room with loud music, for example), and there will also be an on/off switch and a volume control, which can be combined with a switch, and imagine, for example, a wheel that, when turned, reduces the volume and, at minimum volume, turns off the speakers, which is accompanied by a click. This is done on the speakers shown in the photo above.

However, there are speakers in which power and sound transmission are carried out via USB cable. As a rule, these are portable small speakers for laptops that you can take with you on the road. That is, in in this case You only need to connect one cable. Here is an example of such a device in the photo:

The computer will also most likely have a Line In connector - a connector blue color, to which you can connect an input device, but not a microphone, but a player, for example. In some cases, this connector can duplicate the line output. In the photo you can see the cable for connecting the player (this is my old second player (the first was a cassette player), the memory capacity is only 256 megabytes (). Now it is only suitable for photographs for the article =)

How to connect headphones with a microphone (headset) to a computer

Headphones with a microphone that connect to a computer are called headset. It is very convenient to use if you need to communicate by voice using the Internet, record your own voice, play computer games with a friend to talk. I particularly use the headset to record video lessons. Here are a few of them:

And this is what the headset looks like, look at the photo:

On the left side of the headband you can see the microphone in a folded state; you can see a thickening on the wire: there is a headphone volume control and a clip for attaching to clothing.

If you need to connect your headset to your computer, then there shouldn’t be any problems here either, since the headset has 2 cables: one for the speakers, for sound playback, and the other for the microphone (we’ve already dealt with connecting the microphone). They need to be connected to the corresponding connectors discussed above. See what they look like:

As you can see, there are icons on the connectors to make it easier to understand.
Also, the headset, like the other audio devices listed above, can be equipped with a USB connector, which reduces its connection to finding a USB connector on your computer and connecting an audio device to it.

On modern computers Typically, microphone and speaker connectors are duplicated on the front panel of the system unit, which is very convenient if you need to connect a headset - you don’t have to climb behind the system unit. On the headset, the wires will be marked accordingly, that is, we connect the red (pink) to the microphone input (of the same color or marked with an icon), and the green, respectively, to the line input, into which the speakers are connected.

On my old computer, for example, in order for the front connectors to work, it was necessary to connect the pins at the back; there were wires hanging there, and one of them did not match in color, but by method of elimination it was not difficult to guess where to connect it. It was inconvenient and had to be done like this:

On my new computer there is no need to switch anything and there are connectors both front and back. The speakers are constantly connected to the back, and a headset is connected to the front if you need to communicate via the Internet. In essence, these wires are just an extension cord. By the way, you can purchase it if you have inputs for a microphone and speakers only at the back, then you can connect it to the rear connector, fix it somewhere closer and more accessible, because it is inconvenient to get to the back wall of the system unit. This is what the extension cord looks like:

An extension cord costs about $4 to $20. The cost depends on the manufacturer, of course, and on the length, which can vary approximately from 1 m to 10 m (more can be found). It is correctly called a “jack-jack extension cable”, and depending on the type of connector it can be labeled as:

— extension cord MiniJack-MiniJack or there may be marks like MiniJack-MiniJack 3.5 mm extension, or you may come across such a mark, an example of a marking in one of the stores:

Headphone extension cable SPARKS SN1033, Jack 3.5 (m) - Jack 3.5 (f), 3m - in general, this is a mini-jack, the diameter of 3.5 millimeters () tells us this, and in brackets are the designations (m) male - male connector and (f) female - female connector. This is exactly the kind of extension cord that will be useful to you if the cable length of your headphones, headset, or speakers is not enough. You can search on the Internet or ask in a store and how to simply “headphone extension cord” - they will help you.

— Jack-Jack extension cord- may be useful for some types of headphones, example name:

Headphone extension cable, straight cable, 1/4″ TRS Jack (male) - 1/4″ TRS Jack (female)

the type of connector (1/4 inch - Jack) and the type of extension cord are indicated: “male” - “female”

if you need to connect a guitar, then you need a male-to-male cable

Also, so that the wires do not interfere and do not break when bent and serve for a long time, there are adapters with an angle, which are indispensable if the back wall of the system unit is close enough to the wall and the wire bends (although the system unit should not stand close to the wall so that air exchange is not hampered ). By the way, such an adapter can simplify connection to the rear panel of the system unit, since it does not have to be moved away, but can be connected from the side. The photo shows just such an adapter:

To be honest, I have only seen them on sale a couple of times, although in some cases they are definitely a useful thing.

How to connect speakers and microphone to a laptop

Laptops usually have only two connectors: for connecting speakers and connecting speakers. Most often, in front or on the side, they may not be marked with color, but then they will definitely be marked with a pictogram, no one will deliberately confuse you (most often it is pictograms that are used). Look at the photo: the required connectors are indicated by pictograms:

And if you are the owner portable speakers connected to USB, then you need to look for this particular connector. In the photo above, it's just to the left of the microphone jack.

What should I do if my laptop only has one jack for connecting a headset/headphones/microphone?

This question can be increasingly found on forums and in comments. Yes, indeed, many modern laptops, netbooks and ultrabooks have only one headset combined audio jack, instead of the usual two. For example, in the modern ultrabook ThinkPad X1 Carbon Ultrabook there is only one connector:

What to do? Let's figure it out!

First tip: read the instructions carefully so as not to damage the port! You may not be able to connect a microphone to the jack, but you can connect a headset or just headphones. There are models in which you can connect either headphones or a microphone, but you definitely need to read in the instructions what can be connected and what not! Here's an example: the picture shows the instruction page for Lenovo S100. It says that you can connect a headset, you can connect headphones, but you cannot connect a regular microphone!

So, you need to work with a headset, what should you do? The solution depends on what type of headset you have.

1) If you have USB headset, then everything is simple: connect it to the USB connector.

2) If you have regular headset, as described in the article above, then you need an adapter from a 4-pin 3.5 mm Jack to headphones and a microphone, which will have a special four-pin connector (“headset”) designed for a combined headset device, for example an adapter Gembird CCA-417. A 4-pin connector will have 3 stripes:

3) You can just buy special headset with combo, to do this, enter in Yandex.Market or in the search “ headset mini jack 3.5 mm combo» the selection is quite large with prices ranging from $10 to $100 or more

You can also purchase a “native” headset from the manufacturer of your laptop/netbook. Here, for example, is a headset for Lenovo ThinkPad. It comes with an adapter for a laptop with two connectors (the opposite of what we looked at in point 2) and a case. On the official Lenovo website, such a headset costs about $20.

In all cases, in addition to connecting the device, you must also perform the following steps:

• install the driver for the sound card if necessary
• configure (this means setting in Windows itself) - if someone has problems with this particular point (the microphone or speakers do not work after connecting), then write in the comments what device, what computer, etc., you may need a separate article.

Well that's all Enjoy listening to music, watching movies and communicating with family via Skype!

From this article you learned:

• How to connect speakers (speakers) to a computer
• How to connect a headset or headphones to a computer
• How to connect a headset, headphones, speakers to a laptop

IN lately The computer is increasingly used to communicate not only through text, but also using sound and video, but still not all users know how to set up headphones to windows computer 7. The choice of Windows 7 as the operating system is not accidental, because at the moment it is the most common operating system.

First, let's look at how to connect and set up headphones to your computer.

In modern computers, the headphone jack is located on the front wall of the system unit. It is marked green. If there is no such connector, look for it on the back wall of the computer - it will definitely be there.

Let's move on to the headphones themselves, or more precisely, to their plug, which is a metal rod with a diameter of 3.5 mm and is called a “jack”. Pay attention to the "jack" - it should have two or three black rings. To connect headphones to a computer, you need a jack with two rings (three contacts). If the “jack” has three rings, then it is a headset (headphones and microphone), which connects to a universal connector, usually used on laptops. This connector is marked with an icon in the form of headphones with a microphone.

Setting up headphones on a computer

Most often, headphones with a microphone are used for communicating on Skype or in online games. Let's see how to set up headphones with a microphone on your computer.

First, connect the headphones and the computer (headphones in the green connector, microphone in the red). Next, by right-clicking on the speaker in the lower right corner of the screen, open the menu and select “Playback devices.”

Here we will answer the question of how to set up sound on a computer through headphones. In the "Sound" window, select "Speakers" and click the "Configure" button. In the next window, select “Stereo” and check how the headphones sound by clicking on the picture of the left or right speakers. If everything is in order, click “Next”. On the next tab, don’t change anything, click “Next” and “Finish”. In the same “Sound” window, check the setting by right-clicking on the “Speakers” icon and selecting “Check”. Let's listen to the sound. That's it, setting up headphones on your computer is complete.

Let's look at how to adjust the headphone volume on a computer. To do this, click on the speaker icon at the bottom right of the screen and move the slider that appears up, increasing the volume, or down, decreasing it. This is the most convenient way How to adjust the sound in headphones on a computer.

Let's see how to set up a microphone in headphones on a computer. Right-click on the speaker icon and select "Recording Devices". A window with a microphone will open. Right-click on it and select "Properties". Change the settings on the “Levels” tab: use the slider to add volume to the microphone and set the gain level. Click "Apply". On the "Enhancement" tab, check the boxes for "Noise Suppression" and "Echo Suppression". Click OK. Now you know how to set up a headset on a Windows 7 computer.

The normal microphone gain level is no more than 20 dB. PExceeding this value may cause unpleasant noise and background.

Setting up headphones on a laptop

The laptop can use one connector for connecting a microphone and headphones. The headset is used with a four-pin connector (three black rings). You already know the answer to the question of how to adjust the sound in headphones on a laptop if you carefully read the article. This is done in the same way as on a computer - through the "Sound" window. You can open it in another way: “Start” -> “Control Panel” -> “View: Large icons” -> Sound. Next, select “Speakers” and click “Configure”.

Also on laptops, a classic scheme can be used to connect a headset - two inputs: for a microphone and, in fact, for headphones. Let’s stop and once again briefly explain how to set up a headset on a laptop.

1. Checking sound playback in headphones;
2. Setting the sound volume;
3. Microphone settings.

How to set up Skype on a laptop with an operating system Windows system 7, read. With a method for setting up a laptop on WiFi distribution can be consulted .

Connecting wireless headphones

It's time to learn how to set up wireless headphones to your computer. They work using Bluetooth technology. To get started, read the instructions. Usually a bluetooth adapter is included with the headphones. You need to insert it into the USB port of your computer and install drivers on it. If everything went well, then we will see a Bluetooth icon on the taskbar.

Open the context menu with the right mouse button and select “Add device”. On the headphones, you will need to hold down the power button for a few seconds. This is usually described in the headphone manual. Then the computer will find it within two or three minutes wireless headset and will ask you to enter the password that is written in the instructions. That's it, the headset is connected.

Now let's see how to configure the headphones to Windows computer 7. You can also find headphones by right-clicking on the speaker, selecting “Playback devices” and in the “Sound” window that opens, on the “Playback” tab, clicking “Configure” next to the headphones we found. Further adjustment of sound on a Windows 7 computer using headphones follows the scheme described above.

Setting up on a laptop wireless headphones the same thing happens. But there is one nuance in how to configure the headphones to windows laptop 7. If the laptop is already equipped with a built-in Bluetooth adapter, then there is no point in installing another one.- use built-in.

Sound card manufacturers try to put all the settings together. For example, Realtek dispatcher HD is suitable as a program for setting up headphones on a computer. It contains all the settings for speakers, headphones and microphones. It also allows you to add various sound effects. Finding this program is not difficult - it is located in the "Control Panel". By usingRealtek HD ManagerIt's easy to understand how to set up the headphone input on your laptop.

In fact, there are several ways to set up headphones on a Windows 7 computer. You just have to choose the method that is most convenient for you. Reinforce your knowledge with a video on how to set up headphones on a computer.