Smooth transition in Photoshop. Detailed lesson. Create smooth transitions between images
In this article we will look at popular methods of smooth transitions between images.
Such transitions are necessary when you make complex collages or want to beautifully arrange several pictures in one.
From all the options below: soft eraser, soft brushes and gradient, best method is a gradient. This is what creates a first-class transition, without losing the quality of the original images. See for yourself: using an eraser, we paint over the pixels, but where is the guarantee that you will be able to paint over everything perfectly? Of course, you could spend a whole day in Photoshop, erasing pixel by pixel. But, I believe, “the game is not worth the candle,” since we strive not to spend a lot of time on certain operations and do everything quickly.
A soft eraser and brush are good for feathering out the edges so that the two photos blend together well and don't look out of place because of the hard edges.
Now let's take a closer look:
Soft eraser
Since the eraser tool can be used with brush options, using soft brush You can erase part of an image so that another image located a layer below is visible. Using this technique you can achieve the desired result, but it is also irreversible - if you change your mind and decide to combine the images in a different way, you will have to start all over again.
Once you have placed both images you want to merge into one document (each on a separate layer), follow these steps:
1. Drag the image you want to partially erase to the very top of the Layers palette.
Note
Before erasing, it's a good idea to make a duplicate of the layer you'll be working on in case you don't like the result (press Ctrl+J to do this). To new layer did not interfere with you, its visibility can be turned off (and turned on again if necessary).
2. Select the eraser by pressing the E key and set it to brush mode. To do this, in the options bar, in the Mode drop-down list, select Brush. Then, from the Brush Presets drop-down list, select a Soft Brush. Make sure the Opacity and Pressure fields are set to 100.
To make the transition even smoother, experiment with the eraser opacity value. By lowering the opacity value, you can create smoother transitions by moving your brush over the desired area rather than making individual clicks.
3. Place the mouse pointer over the image and erase the unnecessary part. If you make a mistake or change your mind at some point, use the History palette to go back a few brush strokes, or undo the last operation by pressing Ctrl+Z.
Soft brushes and layer masks
An alternative to the eraser is the opposite option - painting a layer mask with a large soft brush. In this case, you are only hiding part of the drawing instead of removing it.
Let's say you want to emphasize how fast a motorcycle goes. Enhance the effect of movement You can do this by adding a little motion blur to your drawing and then hiding some of the blur with a layer mask.
Here's how to create fast movement effect:
1. Open the image and create a duplicate of the original layer by pressing the key combination Ctrl+J.
2. Select the menu command Filters => Blur => Motion Blur. Using this filter, you can create the feeling that an object is moving very quickly. Since the filter blurs the entire image, it becomes difficult to see the desired object in it, so you will have to hide part of the blurred layer by adding a layer mask. To add it, click on the button with the image of a circle in a rectangle at the bottom of the palette.
3. Press B to select the Brush Tool and select a large, soft brush. Set black as your Foreground color.
Let me remind you that when applied to layer masks, painting with black hides what we want. in this case and must be done. Take a look at the bottom of the Tools panel and if they show black and white, then press the X key until the black indicator is on top. If other colors are selected, first set the default colors by pressing the D key, and then press the X key until the black indicator is at the top.
6. Position the mouse pointer over the image and use the brush to hide part of the blurred layer.
Gradient masks
Put the soft brushes aside. Create the smoothest transitions possible possible using gradient - a soft, gradual transition from one color to another. The methods for merging images using soft brushes and gradients are similar in that the images are combined in one document and then a layer mask is added to the top layer. But instead of painting a mask with a black or white brush, you use a black-to-transparent or black-to-white gradient to create a smooth, seamless flow from one image to another.
1. Drag the image that should be in the foreground of the collage to the very top of the list of layers and add a layer mask to it.
2. Press the G key to select the Gradient tool. On the Options Bar, click the selection drop-down arrow. In the drop-down list, select a black-to-transparent gradient, and in the type group, click on the linear gradient button.
3. In my example, I want the Batman logo on the right to be transparent. To do this, I press the mouse button on the border of the logo and hold down the key until I reach approximately the middle of the logo. By releasing the key, I get a smooth transition between images. To improve the quality of the transition, you can also apply a gradient.
When dragging, the Photoshop program draws a line depicting the width of the transition: the shorter the line (the smaller the distance you drag the pointer), the narrower and harder the transition (there will not be a clear border, but you will get something close to it); the longer the line, the wider the gradient and smoother the transition.
If you notice an error in the text, select it and press Ctrl + Enter. Thank you!
Hello dear beginning webmasters. Again .
In this article I will tell you how to make a transition from dark shades to lighter ones, as well as from one color to another.
This action is called a gradient, and since it is essentially a background image, it is executed by the background property, which takes two values:
1. linear-gradient - color transition from one edge or corner to another.
2. radial-gradient - color transition from the center to the edges.
It is written as follows:
background : -moz-linear-gradient (top, #ff0000, #ffcfcf );
top, #ff0000, #ffcfcf );
Below, using an example, we will examine in detail each element of this record.
Unfortunately, gradient still has issues with display in browsers and the W3C specification, so values still have to be prefixed.
A prefix is placed at the beginning of the value, and begins with a dash.
We will have to insert such a list into the element selector, creating a gradient for it, so that your very beautiful background reflected correctly in all browsers. Beauty requires sacrifice.
/body >
This is the simplest, two-color gradient. Let's take a closer look at the values of the background property
The first line sets the background for browsers that do not support linear gradients.
The next 5 lines are for displaying the background in different browsers. First, the gradient value is written with a prefix at the beginning.
Then, in parentheses:
top - the direction from which the first color starts (can be bottom , left , right )
#ff0000 — first color separated by commas;
#ffcfcf — second color separated by commas;
Safari, up to version 5, and Chrome up to ten had their own syntax, which significantly increased the code. This is probably why the gradient for these versions is often not indicated, especially if there is large quantity flowers.
You can make a color transition not horizontally or vertically, but from corner to corner. For this purpose there are the following directions:
bottom right - from the bottom right corner to the top left;
bottom left— from lower left to upper right;
top right - from top right to bottom left;
top left - from top left to bottom right;
You can make a color transition from the center of the block to the edges. Then in the meaning, instead of the word linear (linear), put radial (radial)
#gradient (
background : #ff0000 ;
background : -moz-radial-gradient ( center, ellipse cover, #ff0000, #ffcfcf);
background : -webkit-radial-gradient ( center, ellipse cover, #ff0000, #ffcfcf);
center, ellipse cover, #ff0000, #ffcfcf);
center, ellipse cover, #ff0000, #ffcfcf);
width: 600px;
height: 400px;
border : 1px solid #333 ;
}
Now let's make something like a rainbow, so to speak. To do this, add a couple more colors to the above code, and set the volume of each color as a percentage (the number of colors is not limited)
The color volume is set from 0% to 100% (the first is 0%, the last is 100%, the rest are in between in order). Let's consider this option on a radial gradient. On a linear one, everything is done in the same way.
#gradient (
background : #ff0000 ;
background: -moz-radial-gradient();
background : -webkit-radial-gradient t( center, ellipse cover, #ff0000 0%, #00b630 30%, #6ff5f5 70%, #ffcfcf 100%);
background : -o-radial-gradient ( center, ellipse cover, #ff0000 0%, #00b630 30%, #6ff5f5 70%, #ffcfcf1005);
background : -ms-radial-gradient ( center, ellipse cover, #ff0000 0%, #00b630 30%, #6ff5f5 70%, #ffcfcf 100%);
width: 600px;
height: 400px;
border : 1px solid #333 ;
}
The principle, I think, is clear. So try to write a line for Safari up to the fifth version, and Chrome up to the tenth, yourself.
The gradient is given to anyone HTML block(body, div, h1-6, p, ul, ol), and both global and built-in style (this is for a WordPress site).
Now a few words about how and where to choose colors. There are services for creating gradients that offer color, volume percentage, and gradient code, but their choice is limited by supply.
Therefore, I use the tool colorscheme.ru, in which you can choose a color in an unlimited range, and optimally selected sequences and combinations.
IN top row panel selects the number of combined colors. Going through “Angle 30°” changes the selection range.
In "Scheme Adjustment", the tone is made darker or lighter. In the “List of Colors”, all the colors present in the diagram are arranged by saturation, and with a code in the signature.
HTML Templates in Russian
1 voteGood day, dear readers. Today I decided to prove to you that it is best to study theory in practice. Even if you are a beginner, you can achieve good result without understanding anything about Photoshop! Look, this picture was created entirely thanks to gradients. They are applied to different elements and in varied variations.
If you read this article to the end, you will not only learn how to make a smooth color transition in Photoshop, but also apply this knowledge in practice in relation to text, shapes, create beautiful shimmering diamonds and much more.
I have already taken this picture. If you want, you can then create exactly the same one yourself, and maybe even better, but I will teach you using a different example. Which one? Find out at the end of the article. I will draw with you and at the same time describe the process; I myself still don’t know what I can do. Thanks to this, I can see what problems you may encounter and help resolve them.
Basic knowledge and one secret of always winning
So first we need to open Photoshop. I strongly recommend that you download this program ( purchase licensed version you can here ). You will never find better than her. If you are afraid that you will not master it and will waste your money, completely forgetting about the program after the first try, you can try online service https://editor.0lik.ru/ . It is much more convenient to have your own program and very soon you will understand why.
This is what the 2015 version of Photoshop looks like, if you have a different edition, don’t worry. Everything will be approximately the same. You have a little less options and that's the only difference.
Let's create a new document.
Choosing a size is one of the most difficult issues for me. I took as a basis maximum dimensions pictures for post in social networks. 800x500, but, as you understand, this is not the point. It all depends on the goals and tasks that you are going to perform using Photoshop.
Look, in the panel on the right there are all the main buttons, including the gradient. However, it can't be found now. How so? I myself encountered this problem when I started learning how to work with Photoshop. You read an article, but you have to look for half of the information in third party sources. Google, Google, Google.
May the very smart reader, who knows everything perfectly well, forgive me for small deviations from the topic. I want all blog visitors to be able to follow my lessons. Perhaps someday this will be very useful for you. Will save a lot of time.
In the lower right corner of almost every button, except for the magnifying glass, there is something like an arrow. This suggests that there are several tools hidden in the button.
Hold for a few seconds left button mouse on the button to open additional menu and select a gradient.
Another additional menu opened at the top. It is used exclusively for gradients. Click on the text - a special text menu will open at the top, on the brush and... well, you get the idea.
Click on the arrow next to the color icon. Standard transitions or ones you have uploaded are stored here.
If you do not consider yourself a design genius, then I recommend that you download from the Internet free templates. There are plenty of them. Firstly, it saves time, and secondly, several similar options are usually combined into a theme created in uniform style. This can be applied to one picture without any problems and it will almost always look good.
Installing new templates is not a problem. Download them from the Internet then select the nut on the right top corner and find the “Download...” link.
Select the folder with the downloaded files on your computer and save.
They will be added to the bottom of the list.
Fill
Now let's learn how to fill. Choose any option you like (we’ll move on to creating it a little later) and click on it. Hold down the left mouse button anywhere on the screen and move in any direction. The location of the color transition depends on it.
See the difference.
You can spin it anywhere.
To prevent the movement of your line from shifting and the gradient from blurring, hold Shift button, while you set the direction.
You see, the color transition is now taking place in the center. We'll look at the settings in more detail as we create our own gradient. Now I’ll only talk about the shift of the center. Click on this plate.
Left-click the color at the bottom and move it to the left or right.
This is what I ended up with.
How to Apply a Gradient to Text to Make Letters Look Modern
Now let's write something. Select the appropriate button.
If you need to change the size or the font itself, pay attention to the panel at the top of the screen. Everything is simple there.
Now press Ctrl and at the same time click on the icon of the new text layer. Be careful, you need to click not on the text, but on the rectangle, as shown in the screenshot below.
Now let's create a new layer. There are three options for solving the problem: hold down Shift, ctrl, N at the same time; We use the panel at the top, find there “Layer – new – create”; use the button in quick menu right. In the picture below I have shown it with an arrow.
Now, to remove the highlighting along the edges of the letters, you can click on the selection and then click on any part of the picture. This is the result.
The work with the text does not end there. Look, we have 2 layers: one with a gradient, and the second with letters. Why did it happen there? I'll explain as best I can. Write in the comments if it is not clear. You have written the text. Photoshop realized that these were letters and even suggested that you make them bigger, smaller, change the font, and so on.
Then you selected this fragment. We created a new layer, if we draw an analogy, cut out a stencil from paper and filled it. At this point, Photoshop was lost. He stopped seeing your letters. For him, it is just part of some picture, like a rhombus, square or circle with a cut out center. If you go to work with letters on a layer, you won’t succeed; if you want to apply a gradient to text, the same thing.
If now you want to move the text somewhere and you go to the corresponding section and then start moving it with the arrow, then everything will move away.
We remove the text layer to avoid confusion. Right-click on it and select the desired option.
Types of gradients, filling shapes and creating stars
If you paid attention to the gradient panel at the top, you might have noticed that they come in different types: linear, radial, angular, mirror or diamond. It’s not difficult to see the differences, you don’t have to read the articles, just open blank slate and try to use one or another option. Look what happened.
The only thing worth noting is that if you want to see the perfect result, like in my picture, the arrow needs to be directed from the center.
Now let's go back to our picture. Let me teach you one interesting technique. Color transitions can be used within the shapes you draw. This is very useful, especially for those who are planning to create websites.
So, choose a rectangle or circle. It doesn't matter.
Now the fill color.
Let's go to the gradients section.
We need a rhombus here.
See, it worked interesting effect, but the white color spoils everything. Need a transparent one. Can be found inside templates. If you see a lattice like this inside the template, then this is what we need.
Play with the settings and you will get your ideal option.
Now let's clone this flash. Select movement. Just click on the button.
Now hold alt and drag the duplicate to the side.
This is the result I got.
Create a new gradient and buttons for sites
And finally, I’ll tell you how to create gradients from scratch yourself, and at the same time we’ll understand their settings. Let's create a beautiful button, shall we? I'll add a rectangle with rounded edges to my picture.
This is what he looks like. This time we won't use the inner fill. It is not very convenient to work with a new template through it. Let it be just black for now.
Select a familiar tool and click on the die.
New gradients are created based on old ones. Click on any one. The old version will not disappear anywhere. Then just come up with a new name for it and save it.
Using the upper control points Transparency levels can be controlled.
The lower ones are used to work with color. To expand the range, click next to any point and it will be duplicated.
You can create as many as you like.
To make the transition look modern, you need to smooth out the colors. Don't touch this indicator and everything will be ok. It should be 100%. Ready. You can click “OK” or “Save” - it all depends on your desire.
Now we repeat what we already did quite recently with the text. Hold down ctrl, click on the button of the desired style in the center and create a new one based on it.
Now add a transition and voila.
Let's add text to the button and that's it. It is not clear why the necessary thing is finished. By the way, you can download my source if you want ( Download source gradient.psd ). You can open it in Photoshop and improve my picture. I think it won't be difficult.
Well, that's all. Now you know quite a lot about gradients. If you are a designer, layout designer, website creator, or want to become one, and this lesson was really useful to you, subscribe to the newsletter and learn more about what interests you. You can also pay attention to this site: https://photoshop-master.org/disc149/ . Here you can find a cloud of both paid and free courses who will teach you the real professional work with photoshop.
Good luck to you and see you again.
Today I will tell you how to make a transition in Sony Vegas Pro 13. Moreover, we will learn how to make various transitions, making them smooth, fast and slow. With this feature, the video becomes even more lively and interesting, especially since there will be no more unexpected jumps during various cuts.
So, to get started, you need to load two pieces of video (or more) onto a track. Now, hold down the left mouse button on any of the pieces and transfer it to another plot, but not at the joint, but with a slight overlap.
You should end up with a separate piece with intersecting arcs in the place where the joining occurs. The more overlap there is, the slower and smoother the transition will be. And if the overlap is kept to a minimum, then the transition itself will be faster and less smooth. Here you must decide for yourself what is best for you.
You can control the smoothness of the transition. To do this, you need to do everything by trial and error. If you did it too early, then move it a little further.
Just remember, if you don't ungroup, the audio track will be attached to the video. This means that the video transition will be made in conjunction with the music. If you do not want this or want to do everything separately, then press the U key while highlighting the desired fragment. Then the paths will separate from each other and will no longer be dependent.
Transition with visual effects
But it is much more interesting and correct when the splices between pieces of video or images are accompanied by some kind of animation or effect. And thank God for Sony Vegas Pro has been able to do this since time immemorial. This can be flipping, flash, frame replacement, mosaic, and much more.
In order to make a transition to Sony Vegas Pro 13 with the addition of visual effects, do everything that I described above, that is, connect two fragments so that one overlaps the other. And now, let's get to the fun part.
- Pay attention to the main area and select the “Transitions” tab there. In the left window you will see effect groups, and in the right window all the transitions contained in this group. What’s great is that you can go through them all as a group and visually see what a particular transition will look like.
- Let's say I want to select "Clock Wipe" and one of the suggested effects. To do this, you need to hold down the left mouse button on it and drag it directly to the area where the overlap occurs. No one will allow you to move to another area on the timeline, because this is the only way this effect works.
- After this, the settings for the current effect will automatically open. There you can configure various parameters or leave everything as is. To do this, just close the window and don't worry. The effect will remain.
- If you don’t like the setting you applied, then left-click on the special icon inside the overlap and change the parameters.
- And if you want to completely remove this effect on the transition, then in setting the transition parameters, uncheck the tab.
How to save a customized effect
If you have successfully configured this or that effect, and now want to save it so that you can use it for other transitions, then simply enter the name of your preset in a special window and click on the floppy disk icon to save the result.
Now, when you again want to make the already configured smooth transition effect in Sony Vegas, you just need to select your saved preset from the drop-down list.
How to Make an Amazing Slideshow
Well, now we come to another cool feature, namely the slideshow. If you want to create a collection of constantly changing photographs with beautiful transitions, then why not do it in Sony Vegas?
To do this, simply load all the photos onto one track and combine them with a slight overlap, one after the other. Well, after that, insert various visual effects at the junction of each transition. Remember: the greater the overlap, the smoother and slower the transition to Sony Vegas will occur. At the same time, you can use different effects at each junction.
And of course, don’t forget to load a nice melody on the second track so that it accompanies viewing your photos. I used to do this often, after some holiday I sat down to make homemade clips from photographs and videos. Revisiting all this is a pleasure.
And if you want to master video editing professionally, then I recommend that you take a steep and killer course on working in Premiere Pro. This program edits everything from TV shows to Hollywood blockbusters. The course itself is simply bomb and contains full information, which is easy to digest, even if you are a complete beginner. I highly recommend it.
And that's all for me. I hope you liked the article. Don't forget to subscribe to my blog updates and all my posts on social networks. I look forward to seeing you again on my blog. Good luck to you. Bye bye!
Best regards, Dmitry Kostin.
Today I'll show you how to make a smooth transition between two photos.
I made a picture in advance and this is the result I got:
In order to get such a picture, I will take two photographs that I will combine.
I took a beautiful background with the sea and a photograph of a girl who was photographed against the backdrop of gloomy trees without leaves.
So let's get started - I will do smooth transition of colors and for this I will follow these steps:
Step 1
Opening my photos in Photoshop and using the tool Moving I drag a photo of a girl onto a photo with a sea background.
I want to make the photo of the girl a little smaller and for this I call Free transformation by pressing the keyboard shortcut CTRL+T.
The frame that appears around the photo with the girl has knots that you can pull to reduce the size of the photo, while you need to hold down the key Shift, so that the proportions of the image are not distorted.
Step 2
Now I'm moving to the palette Layers and being on the layer with the girl, I click on the icon called Add a vector mask.
As we see in the palette Layers A layer mask has been formed on the layer with the girl, which is highlighted with a frame, which indicates that the mask is active and all the work that I will do will be carried out precisely on the layer mask.
On top panel, where all the tool settings are located Gradient I click on arrow, located next to the tool icon and in the window that appears with gradients, I select radial Gradient, which goes from black to transparent.
Now I draw the gradient lines not reaching the girl's figure, as indicated in the picture (you may have more directions). When you draw a gradient line, the background smoothly disappears.
It took me two or three times to draw the gradient line in each of the directions indicated in the picture to achieve the result that you see in the picture below.
Step 4
However, we can notice that with the disappearance of the background belonging to the girl’s photograph, the image of the girl itself also changed somewhat, since in some places it became translucent.
But this is very easy to fix.
While on the layer mask, I take a soft round brush white and I paint on the girl with this brush.
The white brush restores all the lost areas of the girl's image.
And we also want to remind you that you can always chat about Photoshop topics on the Photoshop forum and find answers to many of your questions.
Here's what happened as a result:
I connected the two photos together using a fade.
I hope I explained it clearly, how to make a smooth transition between two photos - as you can see it's quite simple.
I also advise you to watch my previous lesson Valentika in Photoshop, which contains a lot of interesting things.
I wish you further success in mastering Photoshop!
Galina Sokolova was with you.