• Connecting and setting up MMS on Tele2? Setting up MMS on Tele2

    In order to mobile phone could access the Internet and send/receive MMS messages, you need to configure the appropriate settings in it. Without settings, access to the above services will not be possible. In principle, almost everything modern phones configured automatically - activation new SIM card leads to automatic order settings that just need to be applied.

    After this, just in case, you need to restart your phone so that the settings take effect as correctly as possible. But sometimes it happens that the phone remains unconfigured. In this case, you need to make manual settings or order automatic settings from the network.

    IN this review we will look at all the ways to make settings for Internet access with Tele2. MMS settings will also be discussed.

    How to order Tele2 Internet settings on your phone

    The easiest way to set up your phone is to order automatic Internet settings on Tele2. They will be accepted from the network and registered in the appropriate profiles.

    You can order Internet settings on Tele2 by calling 679- they will be received within a few minutes in the form of incoming SMS messages. After this, you can go online using a built-in browser or a browser downloaded from somewhere (for example, Opera Mini, which saves traffic).

    How to manually set up Internet on Tele2

    If Tele2 Internet settings are not accepted or installed for some reason, you should set up manual settings. There is no need to put your phone in the hands of specialists and, especially, to pay money for it - all the settings can be set independently, there is nothing complicated about it.

    To enter the settings, you need to create a network profile and enter the following items there:

    • Profile name - Tele2 Internet (you can enter anything);
    • Home page - http://m.tele2.ru/
    • Proxy - disabled (accordingly, we do not enter any settings here);
    • Connection type - GPRS;
    • Access point (APN) - internet.tele2.ru (without http://);
    • Username and password are left blank.

    If necessary, indicate the created profile in the browser settings. Some phones provide a profile for Java applications. If Internet access does not appear, the phone needs to be rebooted. With settings Chinese phones You will have to suffer, since the names of the items there may be completely different.

    How to set up Internet from Tele2 on Android

    If the operating system version is 2.3 or lower, you need to follow the following path: Settings - Wireless communication - Mobile networks- Internet access points. After that, click Menu and select Create APN. Here we prescribe following settings:

    • Name - TELE2 Internet;
    • APN - internet.tele2.ru (without http://);
    • MCC - 250;
    • MNC - 20;
    • APN type - default.

    Your smartphone is running Android control 3.0 and higher? Then the settings will be different. We follow the following path: Menu - Settings - More - Mobile network - Access points (APN). Call up the menu with the button or virtual button in the corner of the screen (it all depends on the design of your smartphone) and select New access point. IN created point we specify two only settings:

    • Name - Tele2 Internet;
    • APN - internet.tele2.ru (without http://).

    We save the settings and try to access the Internet, having previously activated data transfer. Also in the smartphone settings you need to set automatic or forced operation in 3G networks.

    Don't want to bother with manual settings? Call 679 and order automatic settings, which you only have to activate and save.

    How to enter Internet settings on Tele2 on iPhone

    It all depends on the version of the operating system installed on the smartphone. If your iPhone is running iOS control 7.x.x, you need to follow the following path: Settings - Cellular communications (here we turn on the toggle switches Cellular data and Enable 3G) - Cellular network data transfer.

    If your smartphone has iOS version lower than 7.x.x, then the path will be as follows: Settings - General - Network - Cellular data network. Next you need to write a point APN access- internet.tele2.ru (without http://), and leave the username and password empty. After this, you can try to launch the browser and open a website.

    Attention: When making settings on phones and some smartphones, you need to be prepared for the fact that some items may be called differently.

    Article taken from open sources: http://tarifkin.ru/tele2/nastroyka-interneta-i-mms-na-tele2#link6

    Despite the fact that we have long entered the era of mobile Internet, some subscribers find it more convenient to use MMS function for transferring audio or video files. Therefore, the topic of how to set up MMS on Tele2 remains relevant for television system clients. Subscribers can configure the reception of multimedia files in two ways: by manually entering the configuration or automatically. We have described each of the ways to connect to the service in detail.

    How to set up MMS on Tele2 automatically

    Often auto-tuning MMS operator provides to its clients immediately after activation tariff plan. In standard situations, you don’t have to do anything special to get MMS settings. The subscriber only needs to insert the card into the designated slot, the rest is a matter of technology.

    If for some reason the MMS service was not installed on your phone automatically, you will have to download it yourself. We have described below how this can be done.

    You can set up MMS on Tele2 yourself:

    • through your Personal account;
    • call technical support;
    • independent input of network configuration.

    The first two methods of setting up MMS are quite easy to obtain, and already a few seconds after applying for a mobile the phone will come message about activation of the service on the number.

    The third option for establishing a multimedia function involves completely manual configuration. That is, the subscriber will have to enter the MMS parameters for Tele2 manually.

    It must be said that the input parameters for any cellular devices are identical, but the procedure itself will vary depending on the type of mobile gadget.

    Let's look at each connection method in more detail.

    If MMS service not activated on mobile automatic mode, you can order MMS settings by calling the operator at single number 679 .

    After connecting, inform the manager of your desire to activate the service. To enable the function, you need to tell a company employee the brand cell phone and SIM card number. After this, your application will be processed, and within five minutes the necessary settings will be sent to your phone.

    You can also request MMS settings through your Personal Account. If you do not yet have your own personal account in the television system, then registration will not take much of your time.

    To authorize in the system, go to the official Tele2 website and in the appropriate section click the “Registration” button. After that fill out empty fields, create a password and login and press the confirmation key.

    The process of ordering a function is as follows:

    1. Once in your personal account, go to the “Tariffs and Options” category and select the “Phone Settings” section.
    2. Next, empty fields will appear in front of you, in which you will need to enter the following information: brand and type cellular device, the name of the option to be connected.
    3. After filling in all fields, save the data and press the “Submit” button.
    4. After sending the request, the MMS configuration parameters will be sent to your mobile phone.

    Advice! For proper operation options restart your cellular device.

    As mentioned above, in some cases, MMS configuration parameters on Tele2 will have to be entered manually, for example on gadgets like the iPhone.

    So to get multimedia service on your iPhone, do the following:

    1. Go to the menu of your cellular device and go to the “Settings” category.
    2. Next, select “ Mobile communications" and set the slider to "ON".
    3. Next, go to the MMS section and enter the following data (the remaining empty lines no need to fill out):

    • APN – mms.tele2.ru;
    • MMSC – http://mmsc.tele2.ru;
    • Proxy server – 193.12.40.65:8080.

    4. Restart the gadget.

    How to set up MMS on Android

    For those who do not know how to set up MMS on Tele2 on Android with their own hands, we hasten to inform you that doing this is just as easy as in the previous case.

    So if you are happy owner smartphone or tablet running on the Android platform, then activation of MMS produce according to this algorithm:

    • APN type – MMS;
    • MMSC – http://mmsc.tele2.ru;
    • APN address – mms.tele2.ru;
    • Authentication – disabled;
    • Port – 8080;
    • Proxy server – 193.12.40.65.

    Oddly enough, some people still prefer to use MMS to send various multimedia files, and what’s even stranger is that they do it from their iPhone. If anyone doesn’t know, iPhone allows you to send messages and various multimedia attachments for free if you use iMessage technology, which can be activated in the device settings. It will be possible to transfer such data only from one iPhone to another. But this requires an Internet connection, and, as a rule, not everyone has it, and not in all situations.

    And so, let's say that you are among those who do not know how to set up MMC on an iPhone and how to send them! In fact, the process of setting up and sending does not take much time, but it requires careful checking of the entered data, because it is different for each operator. And what’s most interesting is that some operators, depending on the region, may have different settings!

    We will consider options for:

    • Beeline;
    • Megaphone;
    • Tele 2;

    Configuring MMC in automatic mode

    All methods described below in the article are carried out in manual mode, but setting up MMS is also possible automatically. To do this you can do the following:

    • Log in to your personal account. Almost all services of this type from each mobile operator allow you to receive settings for your number, and there you can also select specific model device, both for iOS and Android and any other operating system.
    • Call the service center. Contact your operator's customer support center. Our specialists will send you all the necessary settings via SMS, which you can save.
    • Contact the company office. Each operator has hundreds of offices throughout Russia. You can take your passport, a phone with a SIM card, and contact any of these offices. Managers and consultants will set up MMS for you free of charge and tell you about all the features of working with this technology.

    How to set up MMC on iPhone for Beeline

    Turn on your smartphone and go to Settings. Here you need to select the Cellular tab. Now find the “Cellular Data Network” option and click on this menu item. Here find the MMS item. Underneath there will be different tabs with the prescribed data. In some cases, they may be completely empty.

    And so, for the Beeline mobile operator you will need to register the following data:

    Save all settings and reboot your phone. Next, be sure to add your phone number that is attached to your SIM card. To do this, go to “Settings” and select “Phone”. Click the “My Phone” tab and enter the number. Be sure to indicate your phone number only via +7.

    How to set up MMC on iPhone for Megafon

    As in the first case, go to “Settings” and select the “Cellular” tab, then go to the “Cellular Data Network” menu item and find the inscription MMS. Slightly different data is already entered here, which differs from the option with a cellular phone. Beeline operator. IN in this case All settings are designed for Megafon!

    Here you also need to enter your SIM card number and restart the device to save the settings.

    How to set up MMC on iPhone for Tele 2

    Go to the “Settings” of your phone and select the “Cellular” item. Here, find the “Cellular Data Network” item and click on it. Find the MMS tab, under which there will be several tabs for filling out data. In this subheading, the settings are described specifically for the Tele 2 mobile operator!

    Enter your phone number and restart your iPhone to save and apply the new settings.

    How to set up MMC on iPhone for MTS

    For the mobile operator MTS, as for all others, the setup principle is the same. You need to open the “Settings” shortcut in the main menu of the phone and select the “Cellular” tab, then go to “Cellular Data”. There will be an MMS item, under which the columns with the configuration are located. Enter the following parameters for MTS:

    Enter your phone number in the settings and reboot the phone so that all settings are saved and applied.

    Setting up MMS on iPhone: what to pay attention to?

    Attention! In this case, the settings for iPhone 4s with operating system are described. iOS system 8.4. In others iPhone generations And iOS versions Menu items may differ in name or location, but the setup principle remains the same.

    It is also worth noting that mobile operators Depending on your region, MMC settings may vary slightly. In this case, we recommend that you go to the official website and view the settings for your region or a specific region!

    Another important point– in most cases, settings for MMC and Internet for all iPhones are installed automatically as soon as you insert a SIM card into your smartphone. If this does not happen, then configure it manually, as described in the article above for each individual operator.

    How to send MMS on iPhone

    If you didn't know, then you probably don't know how to send them! We decided to describe several ways especially for you!

    1. Go to the message sending menu, enter the recipient's number or select from phone book. Next, click the camera icon and select any photo from your phone’s gallery or take a new one by taking a photo with any of the iPhone cameras. You can add any text below. Now all that remains is to click the “Submit” button.
    2. Go to the “Phone” tab, which is located in the lower left corner of the screen and select the contact to whom the MMS will be sent. Click on it and select the “Send Message” tab. Click the camera icon and insert one or more images. In the same way, you can send your location coordinates, short videos, contact information and other information.

    Now you have MMS set up, you can easily send multimedia messages to friends and family, no matter where you are. globe they weren't there. Today, one MMS costs 7 rubles, but operators have specialized tariffs that provide a specific package free MMS. If you and your friend have e-mail, then the easiest way to transfer photos is via E-mail. After all, photos in MMS are highly compressed, and for the iPhone this is quite critical, considering that Apple devices have some of the best photos in the world.

    The MMS option allows Tele2 subscribers to exchange multimedia messages that can contain completely different attachments. For example, these could be photographs, video files or audio recordings. It is worth noting that the size of one multimedia message is limited. But today, almost everything mobile devices can automatically compress MMS messages to the required size.

    In order to activate this service, you need to make the following settings, otherwise this option will not be activated and it will be impossible to send MMS messages. You also need to know that the subscriber to whom this message will be addressed must have a mobile device that supports this type communications. Otherwise, he will only receive a link to the MMS gallery and a code to receive of this message. But if the subscriber’s phone does not support receiving MMS messages, then he can simply go to the gallery website from any computer and view the contents of this message.

    On at the moment, almost all existing mobile devices, smartphones and tablets can send and receive multimedia messages. But in some situations you will be required to manually configure the existing gadget. The thing is that only the most popular and widespread models have automatic settings. If you do not have the most common device, then most likely you will have to configure it manually.

    If you don’t want to set up your gadget yourself, then you can contact any nearest communication store and they will definitely help you. Only the provision of this service in communication shops is carried out on a paid basis.

    You can also call hotline Tele2 and clarify all settings. But keep in mind that the waiting time for an operator response can be quite long and the most best way It is still necessary to perform the settings yourself.

    Automatic settings MMS TELE2

    Undoubtedly, almost every subscriber would like his device to automatically accept settings from the Tele2 operator. It is worth noting that in most cases everything works out this way - you just need to insert a SIM card into the device and within a few minutes automatic settings will be sent to it. You will only need to activate these settings and then use the sending and receiving service MMS messages. If a situation arises that the automatic settings did not arrive or they were previously rejected by the subscriber, then you will need to order them again.

    There are two ways to order automatic MMS settings on Tele2:

    • Call short number 679
    • Order settings through your “Personal Account”.

    Manual setup of MMS on TELE2

    Manual configuration of MMS on Tele2 must be done in the “Connection settings” section. The name of this section can be individual for each device.

    Here you need to specify the following parameters:

    • Profile name – Tele2 MMS(or any other);
    • Home page – mmsc.tele2.ru;
    • Proxy – included;
    • Proxy server IP address – 193.12.40.65 ;
    • Port – 8080 (for older phones with WAP 1.1 the port number is set to 9201);
    • Connection type (channel, etc.) – GPRS;
    • Access Point (APN) – mms.tele2.ru(not to be confused with the home page);
    • Username – not filled in;
    • Password - not filled in.

    As soon as you enter manual settings, then you will need to send an MMS message to absolutely any phone number. This action will help you determine whether everything was done correctly.

    How to set up MMS for devices running the Android operating system

    Most devices that run Android can automatically configure settings for receiving and sending multimedia messages. If automatic settings were not performed, then you will have to configure this device in manual mode.

    To do this, you need to go to the mobile network settings, find the access point settings item and create a new point with the following parameters:

    • MMSC ( home page) – mmsc.tele2.ru;
    • Access point type – mms;
    • Access Point (APN) – mms.tele2.ru;
    • Proxy – 193.12.40.65 ;
    • MCC 250 ;
    • MNC 20 ;
    • Login and password – empty.

    How to set up Tele2 MMS on iPhone

    In order to make settings for receiving and sending multimedia messages for iPhone, you will need to go to the network settings section and select the “Cellular Data Network” menu item. The setup on iPhone4, iPhone5, iPhone6 ​​is almost the same.

    How to set up MMS on Tele2 is a question that often requires prompt solution, because exactly this service allows the company's subscribers to exchange multimedia files with various attachments: photographs, videos, audio recordings. In order to connect the service, Tele2 offers several options: configure it automatically or manually.

    Basic conditions for successful setup

    To set up MMS transmission, you need to take into account certain features of this process:

    • The service is available for connection only after activating the SIM card. If it is not activated automatically, use the Tele2 service by calling 610;
    • in order to create and send MMS messages, first of all you should make sure that the device supports this function;
    • If this service is not supported, then you can view incoming MMS messages on the official website in the MMS Gallery tab. The only condition for its sender is that the message must contain only a regular image. Videos or images accompanied by audio recordings do not open in the gallery;
    • the MMS notification service can only work after setting up an Internet connection;
    • For devices running on the WAP 1.x protocol, correct MMS sending is not guaranteed.

    Automatic settings MMS Tele2

    Typically, connection and setting up MMS-connections are provided automatically by Tele2. To do this, you just need to insert a SIM card into your phone and within a few minutes all the necessary parameters will be entered into your device. If the settings were rejected or cannot be applied, they can be ordered again from the company. To do this, use one of two methods:

    1. Order using a short call service number 679. The operator will accept your application in order of priority, and this often requires you to wait some time. In order for the support service to create an automatic setup, you will need to provide the operator with your SIM card number and phone model. In response to your request, within 10 minutes you will receive standard parameters for installing the service for transferring media files to your phone.
    2. Order via "Personal account" from the company's official website. Here you need to open a tab "Tariffs and services" and select item "Phone settings". In the window that opens, fill in the fields indicating the manufacturer and model of the device, as well as the type of connection settings. We indicate Tele2 MMS as the connection type. After this, confirm the request by clicking the button "Get Settings", and after a short period of time we receive all the parameters on the phone. To activate, we use them by saving and restarting the device.

    Important:For correct operation services, the device must be rebooted.

    How to configure Tele2 MMS manually?

    Almost all modern gadgets support the function of sending and receiving media files and are configured automatically when the SIM card is activated. But there are still situations when the service is not activated and you need to enter parameters manually. This is especially true for not the most popular models.

    In order to configure, you need to receive the parameters on your phone by sending a request *202#. Further, depending on the phone model, several options are used self-configuration MMS.

    Important:You can activate the service in salons cellular communications, but at the same time this operation will be paid.

    How to set up MMS on Tele2 on standard phones?

    In order to set the parameters for receiving and sending media files to your phone, you need to go to the connection setup department. The exact name of the section varies depending on the device model. Here we open the MMC settings tab and specify the following parameters:

    • name (profile) – Tele2 MMS (you can use any name you come up with);
    • start page – mmsc.tele2.ru;
    • proxy – enable;
    • IP address – 193.12.40.65;
    • channel – GPRS;
    • APN – mms.tele2.ru4
    • port: for modern devices– 8080, for phones working via WAP 1.1 – 9201.

    The remaining fields are not filled in or remain unchanged.

    After entering the parameters manually, you need to send a control MMS message to any number. Thus, the service is activated.

    How to set up Tele2 MMS on Android?

    The Android system is aimed at automatic connection for similar services. But if this does not happen, then the parameters are entered manually. To do this you need to take several steps:

    1. enter the main menu;
    2. open the settings section additional networks communications;
    3. press tab "Mobile networks" and select the settings window new point access.

    In the section that opens, select from the presented access points with the name “Tele2 MMS”. Then save and reboot the device. If such a profile does not exist on Android, then press the active button located at the bottom of the screen with the “+” sign to create a new profile. In this case, enter the parameters:

    • MMSC – mmsc.tele2.ru;
    • APN – mms.tele2.ru;
    • access type – mms;
    • MCC – 250;
    • proxy – 193.12.40.65;
    • MNC – 20.

    Leave the password and login tabs blank.

    After entering all the data, the device should be restarted.

    Important:When setting up MMS Tele2 on the Android system, you should change the data only in the specified fields.

    Read more: