Problems connecting iPad to Wi-Fi and their solution. How to fix “Invalid password” error when connecting iPhone or iPad to Wi-Fi

Greetings!
Since you got to this page, it means that today, or maybe a couple of days ago, you purchased brand new iPhone or iPad, and you don’t know how to connect it to the Internet - guess what? Then read to the end, in this article I will tell you in detail, how to connect Apple iPad to Wi-Fi. Let's go!

iPad + Wi-Fi - Connect to a visible network

Since you still haven’t been able to access the Internet from your iPad, it means you have a version without a 3G module and support for SIM cards. In this case, you will definitely need Wi-Fi. To enable it, click on the “Settings” menu icon.

and go to the “Wi-Fi” section

A list of available ones will open. at the moment networks to connect our iPad to WiFi. We need either one for which there is a password, or one that is free to connect - it is indicated by a Wi-Fi icon without a lock.

Click on the selected network and enter the password

and voila - the Internet appeared!

How to connect iPad to an invisible Wi-Fi network?

However, there are also networks that may not be visible in this list. This was done specifically to ensure greater security, so that various idiots would not try to hack it by guessing passwords. In order to connect to such a network, you need to know the following information:

• SSID - that is, the name
• Encryption type - usually WPA2
• Password

Read more about how in another article.

If Wi-Fi on iPad doesn't work?

One of the reasons that WiFi on the iPad does not work, although the connection is active, may be the use of settings on the wireless network in which the IP address must be specified manually. To do this, also go to “Settings - WiFi” and click on the name of our network. Here we click on the item “IP Settings”

and select “Manual”

manually enter the data provided by the system administrator (or look in the settings of the router that distributes wireless signal):

• IP address - the address that the iPad will have
• Subnet mask
• Router - router address

Going back a step, you can also set DNS - usually this is the same router address

I hope with this detailed instructions You won't have any problems connecting your Apple iPad to Wi-Fi!

All Apple equipment undergoes strict equipment certification and most often works without failures. But breakdowns happen, and that's a fact. For example, the Internet via Wi-Fi stops working on the iPad. The reasons why these things happen can vary, but most of them are fairly easy to solve. To do this, you don't have to carry your iPad to service center. Let's consider the options independent decision problems.

Often a problem with Wi-Fi not working you can solve it yourself

Software problems

The main symptoms of this malfunction:

• appears in the iPad menu;
• The device connects to it quite successfully, a standard icon is displayed in the status line;
• At first, the Internet works without problems: all pages are opened through the browser, files are downloaded, you can go to the store Apps Store;
• As time passes, sites do not load, and no applications running over the Internet function.

If the iPad is frozen and does not respond to any presses, do forced reboot- simultaneously hold down the power and home buttons for 10-15 seconds until the device turns off. You can also pull out battery and re-insert. After the tablet turns on again, the Internet usually starts working as expected.

Reconnecting to the network

It is likely that an error occurred while working through specific network Wi-Fi. Then try removing it from your device. From the iPad menu, go to Settings - Wi-Fi. Click on the name of your network and select “Forget this network.” The system will delete all data about this connection from memory.

Now try to connect again by entering your password. Quite an effective method.

Resetting network settings

If the previous advice did not help you, then you can try resetting everything network settings. Please note that this is not about . Only logins, passwords, network settings and access points will be reset.

Set up the Internet again, connect to the network via Wi-Fi and enter the password. If your tablet's wireless network still doesn't work, check your router.

Check if it works on other devices. Although this is a fairly reliable technique, sometimes it can also fail. If the Internet does not work on your laptop or smartphone, reboot the router.

On back cover The device has a small button. Press it twice to turn off and then turn on the router. Or, alternatively, unplug the power supply from the outlet.

Hardware problems

What to do if none of the above methods turned out to be effective, but in iPad settings icon Wi-Fi gray colors and the message “No Wi-Fi” is displayed? It is quite possible that Wi-Fi does not work due to a defective module or a physical defect (for example, you dropped the tablet or moisture got into it). The contacts connecting the antenna and the chip processing the data could also break.

If the tablet is under warranty, contact an official service center to replace the module. By the way, if the breakdown was your fault, we strongly advise you not to repair it yourself! Otherwise iPad repair It could cost you a pretty penny.

Many iPad and iPhone users have encountered a problem where, when connecting to a saved network, iOS displays the “Invalid password” error. At the same time, you are sure that the password is correct and use it regularly. Considering how dependent smartphones are on the Internet, it is not surprising that such a problem is annoying and interferes with the normal use of the device. Fortunately, there is a solution.

4 reasons for the “Invalid password” error

Before moving on to further instructions, make a few simple steps to dismiss others possible reasons this problem.

• Make sure you entered the correct password (check on another device - the password may have been changed)
• Make sure you are connecting to the correct network (often there may be several networks with similar names in the same building, especially if they are installed by default by the router manufacturer or system administrator)
• Check the case of letters in the password
• Make sure you don't have it enabled Caps Lock or a different keyboard (for example, French instead of English)

These actions may seem stupid to you, but in fact, often the reason lies precisely in incorrect input password. You may have Caps Lock pressed, or you heard a word incorrectly, or you extra space. For example, if the password is Burrito123, then it must be entered exactly like this: with a capital letter and without a space before the numbers. Otherwise, you will see the “Invalid password” error. Well, it’s completely logical that if you connect to another network and enter required password, then you will not get access to the Internet either.

Having done this simple check, we have verified that the password and network are correct. Now you can move on to the solution.

Fixing the “Wrong Password” error on iPhone and iPad

1. Reboot the device

Often simple reboot iPhone or iPad is enough to solve simple glitches in Wi-Fi work– including the inability to connect to a known network.

To reboot:

1. Press and hold the Power button until the slider appears on the screen
2. Drag the slider to turn off the device
3. Wait a few seconds for the screen to go completely black and press and hold the Power button again until you see the  logo. By the way, we talked about how to type this icon on any device in this article.

When your smartphone or tablet turns on again, try connecting to Wi-Fi again. In most cases, this is enough to solve the problem.

2. Forget the access point, then connect to it again

3. Reset network settings in iOS

This method involves complete removal all Wi-Fi settings and saved points Wi-Fi access. Accordingly, you will have to re-enter your password to connect to an already well-known networks. You will also have to spend time setting up the Wi-Fi of your smartphone or tablet.

Resetting your network settings can solve other Wi-Fi problems as well. In particular, this way you can get rid of the error “Unable to connect to the network”.

After a factory reset, you may need to configure network components iOS. For example, if you used alternative DNS server, manual settings DHCP protocol, as well as VPN or proxy, you will have to enter all this data again.

4. Restart your router and modem

To do this, disable Wi-Fi router or modem from the network, wait 15-20 seconds, then connect again.

Please note that this is not always possible: for example, in a public place or at work (provided that everything is working for all other employees). So this method is worth trying at home or with friends, but not at the airport, office or public place.

• Connect to a different hotspot to make sure Wi-Fi is working on your iPhone or iPad
• If the device cannot connect to one Wi-Fi networks, then this could be a hardware problem - such situations are rare, but still possible - especially if the device has often come into contact with water or has been dropped. In this case, you should contact an Apple authorized center for diagnosis and repair.
• Finally, creating a backup can help, full reset device settings and subsequent data restoration from backup. This method should only be used as a last resort - if all other tips have not worked and you are sure that the problem is not a hardware failure

Please remember that to connect to hidden network Wi-Fi you will need to manually enter the SSID.

Did these tips help you solve the problem? Have you encountered other errors that you couldn't fix on your own? Write about it in the comments, and we will make an article dedicated to fixing this problem!

iPad owners often encounter the problem of incorrect connection to the network via Wi-Fi module. These problems are mainly caused by software glitches and can be resolved by updating the software.

• Restarting all modules involved in synchronization with the network (disable/enable the router, disconnect/enable the cable or DSL module from the outlet).
• Reboot the iOS device (simultaneously pressing the power and home buttons).

If attempts to connect to at least one Wi-Fi network remain futile, you should contact the gadget manufacturer - Apple company. Or in companies that provide repair, configuration and glass replacement services for iPad 3.

Let's look at the most common reasons why an Apple device does not want to connect to Wi-Fi.

iPad doesn't see Wi-Fi

Lack of synchronization with the network can be caused by several reasons:

1. Weak signal from the router. Solution: make sure the router is turned on and place the Apple gadget within its coverage area.
2. The Wi-Fi network is deactivated. Solution: turn on Wi-Fi (Settings -> Wi-Fi). If a network is active, when you click on its name, a blue flag appears.
3. Network settings failed. Solution: on the desktop, click the “Settings” icon -> in the left menu “Wi-Fi” -> select the desired network from the list -> item “Forget this network” -> restart the iPad -> enter the network settings yourself. The same result will be achieved by the following procedure: Settings -> General -> Reset -> “Reset network settings”.

Error "iPad does not connect to Wi-Fi - incorrect password"

A similar message may appear if the user has forgotten the password to connect to their Wi-Fi network. Sometimes an error occurs when software failures, correct password is perceived by the device as incorrect data.

Solution: reset the router settings and further deactivate the password protection, while the network will not be protected from unauthorized access. A reset button is required on every router (a small recessed button is located on the back of the device). Pressing and holding the button for 5-10 seconds will reboot the router and activate the factory settings. After this, you can reconfigure the router through the admin web interface.

iPad mini 2 and Wi-Fi

New generation devices operate on iOS 8.1, iOS 7. But even they have problems with the Internet using a Wi-Fi connection or there is no connection at all. Solution: set static DNS and IP (“Settings” -> in the menu on the left “Wi-Fi” -> select the desired network from the list -> section “IP Address” -> Static -> manually enter required parameters). If the connection is restored, but some sites do not open and programs do not work, you should set a static DNS (the algorithm is the same).

Most often, the reasons for the incorrect connection between the iPad and Wi-Fi are hidden in unfinished software and imperfections in the mobile phone. operating system. This applies most of all to iOS 7. According to many experts, the main reason why the iPad does not always see Wi-Fi is the action of the energy-saving Broadcom BCM4330 chip. It blocks the operation of modules that actively reduce the iPad battery level. Solution: immediate update of the device software, rational distribution of battery resources for Broadcom BCM4330.

iPad won't connect to Wi-Fi after update

After changing the firmware, the device may not be visible home network, But Wi-Fi button be active. This mainly applies to gadgets associated with less common outdated D-Link routers 624.

Solution: downgrade the modem firmware, make sure that the specific iPad is included in the list of supported products, change the connection channel (set to Automatic, leave WPS enabled). You can also change the region in your wireless settings. In 90% of cases, flashing the Apple device helps.

iPads of any generation will not be able to connect to the Internet via Wi-Fi if the network hardware is damaged. Solution: Check and replace damaged connections, adapters and cables.

Software reasons for an incorrect Wi-Fi connection can be eliminated yourself, but it is better to entrust the solution to technical malfunctions of the gadget to specialists.

Tablet Apple computers iPads are in great demand among gadget lovers. They have high performance and allow you to decide the most different tasks, starting from working with by email and ending with playing various fun and exciting toys. To connect to the Internet, iPads most often use Wi-Fi networks - the user needs to find the desired network, enter the correct password and wait for authentication. But what should you do if your iPad won't connect to Wi-Fi? The problem is not very serious, so almost any user can cope with its solution.

Choosing the right network

Have you come to a shopping center or a restaurant? We found a note that in this place is there wifi access? Turn on your iPad, select the appropriate network and try to connect to it. The connection situation can be twofold:

• The selected network will ask for identification - in this case you need to find the password for this network, otherwise the connection will be impossible;
• The selected network will be allowed through without a password - excellent, although not very secure (connecting to such networks is not recommended, as there is a risk of theft of important data or interception of transmitted/received information).

The absence of a password is a big plus for crowded places, since users do not have to look for identification data. If a password is set, then you need to get it. But what should you do if your iPad won't connect to Wi-Fi because the network won't accept your chosen password? There are several reasons for this - you chose the wrong network (sometimes several routers work at once in large buildings), the admins changed the password, an error occurred in the iPad itself. What to do?

Try to clarify the name of the network (for example, from the waiter in a cafe or from the administrator of the establishment where you are) and check that the password provided is correct. It is possible that the password has changed, but the administration has not yet provided access to the updated data. After clarifying your password, try connecting again.

Wi-Fi doesn't work on iPad

Sometimes errors arise in the electronic devices, as a result of which they are reluctant to connect to routers and access points - even if access is granted without a password. If your iPad won't connect to Wi-Fi, try restarting your tablet. Restarting the operating system will get rid of existing errors and glitches. iOS functionality will be restored, and you can safely connect to your home or public network.

If a problem with connecting to a Wi-Fi network occurs after certain actions, try removing the software installed during this period or returning the settings - as practice shows, greatest number connection problems are somehow related to incorrect user actions. Therefore the most best option- “roll back.”

Connection problem occurred after update software? Try restoring the operating system - this will help get rid of many “glitches” with the system. Before updating or restoring software, be sure to create backups important data. Otherwise, you may lose important files.

Troubleshooting router problems

Your iPad 2 won't connect to Wi-Fi? Very often, connection problems are tied to problems with the router. If it is configured incorrectly, then connection problems simply cannot be avoided. In order to properly configure your router, contact your provider - call hotline or use the official website. After reconfiguring the router, send it to reboot and try to connect again.

When setting up your router, set an easy-to-remember name for your Wi-Fi network. The thing is that by leaving the name suggested by the router, you create confusion - in conditions of densely located households wireless networks you risk getting confused about access points and choosing the wrong router. In this case, you will be unsuccessfully “hollowing” into someone else’s router and spitting on the lack of connection. Therefore, the network name must be unique.

When setting up an access point, pay attention to the encryption type. If you have WPA2 encryption installed, then there should be no problems with the connection. If they still exist, try specifying a different encryption type in the settings, reboot the router and try to connect again.

If you're having connection problems, you can try setting up a network without encryption to test connectivity. Return after testing password protection back.

Lack of confident reception

Another problem facing iPad owners may be poor reception of the Wi-Fi network to which the current connection is made. A stable connection occurs only when you are within the coverage area of ​​an access point or router. If the signal is weak, then problems are possible:

• Constant password requests;
• Loss of router signal;
• No connection when there is a connection.

In some cases, the router perfectly sees all calls from the devices around it. But the devices themselves (including iPad tablets) cannot always receive a signal from the router. As a result, one can only dream of establishing a stable connection. In order to create conditions for a normal connection with the router, you need to get closer to it. In this case you will enter the zone confident reception, thanks to which the iPad will be able to connect normally to the router via Wi-Fi. If, after approaching your router, you notice that the connection has stabilized, try changing the router - buy a model with two antennas, it will help increase the range of the network.

Routers with removable antennas will help provide a wider range of reliable reception.– install a couple of antennas of increased length instead of the standard short antennas and form a solid reception area. A good expansion of the reception area is provided by powerful remote antennas with wire, which have good gain and increasing the sensitivity of equipment.

Contact the service center

If you have already tried everything that you could try, but there are no results, contact the service center. It is quite possible that something happened to your iPad. Suspicion should also fall on him if any other devices are connected to your router except your tablet - take it to a service center for testing and repair.