iPhone service codes. Cheat codes for GTA: San Andreas for iOS (iPhone, iPad)

Service codes For mobile phones is a set of commands with which you can get various secret technical information about the handset. For devices, for example, from Samsung, this has always been the norm. But Apple is extremely reluctant to share such information with the audience, but this does not mean that it is impossible to access it. As much as possible!

Typically, all these codes and ciphers are dialed from the device's dialer. In other words, this is the place from where any user can dial the subscriber’s number, USSD command, or simply poke touch buttons and listen to the beeps made by the handset.

Many people know that, for example, the command *#06# shows the IMEI of any mobile phone or device with a radio module. This mandatory requirement to everyone similar devices, designed to work in GSM networks, WCDMA and IBEN. All other codes are at the discretion of the manufacturer.

In fact, this is a very useful thing for consumers. Before purchasing a device, you can always check the functionality of its main technical components: display, microphone, sensors, and so on. First of all, this applies to devices from the South Korean electronics giant Samsung.

But also for Apple iPhone there is something interesting. It is connected primarily with the operation of the smartphone’s radio module and setting up its interaction with the operator. So, below are the commands we are interested in:

*3001#12345#* – access to basic information about the inserted SIM card, operator network, current signal status, etc.

*#43# – information about call waiting.

*43# – be careful, this command activates the call waiting function.

#43# – and this one already deactivates call waiting.

*#21# – receive information about call forwarding.

##002# – deactivate call forwarding.

*#33# – information about blocking outgoing calls, messages, etc.

*33*# – activate call blocking.

#33*# – remove this lock.

#31#phone number – set to block the number for the call.

*3370# – activation of the full-bit encoding script. Leads to improved communication quality, but directly affects battery consumption.

#3370# – disable the above mode.

*#5005*7672# – read number service center for the operator installed in the phone SIM card.

Godmode, of course, won’t open, but that’s still something. Thus, through experimentation, you can configure in detail incoming / outgoing calls on a newly purchased iPhone. Good opportunity get the most out of your smartphone without resorting to various hacks and other illegal things.

Hello! Those who saw the advent of mobile phones probably remember that the number of functions they had was not very large and many had fun with the so-called test mode (well, or the engineering menu - everyone called it differently). It allowed a lot - increase the volume, check the work various functions, find out the network signal level, etc. Honestly, I didn’t think that the iPhone had a similar one test mode... but that's how it is! True, you can do not so much in it, but still a few interesting features There is. Today I will tell you about this in a little more detail, let's go!

Important note! In fact, the engineering menu is intended (as the name suggests) exclusively for engineers, testers and service center workers. All operations are carried out at your own risk. Remember this!

Well, let’s start with those who are not scared by this! :)

Why do you need test mode on iPhone?

iPhone has a special engineering menu where you can see all the technical information about the strength of the cellular network signal, communication towers and much more. On the one hand, in most cases there is not much benefit from this. The iPhone already has a general cellular signal indicator located on the left top corner- five points that roughly reflect the reception quality in at the moment.

And if you take a different look, then seeing the real and actual strength of the cellular network signal in exact numbers, instead of the usual 5-point scale, is at least interesting, and in some cases even necessary.

Why even know this? Two options come to my mind:

• Just for fun, try that such a function exists and forget.
• Choose the telecom operator that provides maximum coverage in the place where you are most often.

After all good signal- this is not only the confidence that you can always be reached by phone, but also more long work battery on one charge. After all, bad reception is one of the...

How to enable the engineering menu on iPhone?

In order to activate test mode, you need to do the following:

• Go to Settings - Wi-Fi and turn it off.
• It is important to remember that the strength of signal reception depends on whether you currently have LTE enabled or not. To get an accurate result (for example, when comparing operators), conduct testing in one mode - 3G or LTE. Let me remind you that switching between them occurs in Settings - Cellular connection- Data parameters.
• You type on the keyboard (the same as regular number) the following combination - *3001#12345#* and press the call button.
• The test mode will start and now instead of “network indication points” you will see the exact signal numbers.

To close engineering menu and the iPhone will return to its normal state by simply pressing the Home button.

It is important to know that when performing this manipulation on an iPhone with iOS 9.0 and older, when turned on, there will initially be no numbers in the upper left corner, only the inscription “Back to: Phone”. In order to see exactly the signal level, you need to perform certain actions. More on this below...

If you want your iPhone to always show the numerical signal level, instead of the usual dots, or just see them on a device with iOS 9.0 and older, you need to do this:

1. Start test mode.
2. Hold down the power button until the slider with the word “Turn off” appears, release the button - the slider should remain on the screen.
3. Press and hold the Home button until you are taken to the desktop.

That's it, now the iPhone will constantly show the network signal level in numbers. Even after a reboot.

In order to return everything as it was, you will need to turn on the test mode again and exit it by pressing the “Home” button.

What do the numbers at the signal indication mean?

Well, what they mean is, in principle, clear - they show the strength of the cellular network signal reception as accurately as possible. But which numbers are “good” and which are “bad”?

In short: the smaller and closer to zero, the better. If we consider in comparison with the “normal” indication (five dots), then a value less than -80 is full and confident reception(all five points are black), and lower than -110, on the contrary, there is only one division out of five.

Here is a list of digital codes that no one knows.

It seems that all the secrets of iOS have already been solved, dozens of articles have been written, we know everything.

But no, V apple smartphone there's still some hidden possibilities.

With the help numeric keypad You can enable some features that will definitely come in handy.

Like in video games, remember? You type a secret code into Mortal Kombat and get access to goodies.

You can do the same with your iPhone.

1. Hide your number

To hide your number, dial #31#, then immediately the subscriber's number.

Press call and be sure that your interlocutor will not know who is calling him: “unknown number” will be displayed on his screen instead of your mobile number.

Spy trick!

2. Find out the strength of your cellular signal

Sticks are uninformative garbage. Look how you can clearly see the quality of GSM signal reception:

• Dial *3001#12345#*, call– you will see a hidden test menu
• Press and hold the power button until the “Power off” slider appears
• Release the Power button and press the Home button
• Hold it until the desktop appears

Now pay attention to the upper left corner - numbers have appeared instead of sticks! Here's what they mean:

Now everything is clear, right? If you want your boring sticks back, just reboot your iPhone.

This feature does not work with iPhone 7 or 7 plus.

3. Find out your SMS center number

If you do not communicate via iMessage, then all messages are sent to the data center, from where they are already transmitted to the recipient. Know this secret number, where all your SMS messages go.

Dial *#5005*7672#, then “call”

Why is this needed:

If you suddenly stop sending SMS messages, you can change or restore the data center number. To do this, type the following on the numeric keypad:

• for Megafon – **5005*7672*+79262909090#
• for Beeline - **5005*7672*+79037011111#
• for MTS – **5005*7672*+79168999100#

SMS messages are sent again, everyone is happy.

Well, you probably know how to find out your IMEI, but just in case, let me remind you:

You're dialing *#06# and “call”.

This unique code is the identifier of your iPhone.

Subscribe to our and, there are also a lot of interesting things there!

We also have a cool Telegram channel with the latest news.

Each secret code for iPhone is combination of numbers and symbols* (asterisk) and # (pound sign). They are entered using standard panel To dial a number: simply open the Phone app and press the required characters on the keyboard.

Depending on type of combination the user will need to press the call button or not press it (some codes work instantly after dialing). This depends on whether the combination matches the media parameter or specific model smartphone.

Now let's take a quick look basic secret codes for iPhone:

• IMEI number

IMEI is international identifier mobile equipment, a 15-digit code that is unique identifies your iPhone in GSM, UTMS, etc. networks. It is always printed on original box purchased device and may be required in cases where the device IMEI is needed and when filling out a complaint to the police or when contacting insurance company. This identification number can also be found in your phone settings.

* 3001 # 12345 # * + “Call”



By accessing the hidden iPhone test, you can find out the real updated information about your mobile network. The menu that appears will show the numerical value of the signal and you can read data about the nearest communication towers.

If you click on the level digital signal in the upper left corner of the screen, will appear ability to switch between graphic and digital displays. Numeric values ​​are always negative. Numbers around "-50" indicate optimal reception, while "-120" are considered very weak.

• Call barring

Status: *#33#

Enable: *33*pin#

Turn off: #33 * pin #



These secret codes for iPhones will help you check restriction status of all your outgoing calls, user data and text messages. This ban used to protect against accidental calls, for example when a child may be playing on the phone. Modern iOS allows you to perform the same shutdown directly from your phone's settings or by turning on Airplane Mode. But anyone can disable these settings.

Important to know

Replace "pin" with your SIM card PIN, not the iPhone code!

Status: *#43#

Enable: *43#

Disable: #43#



This parameter allows receive other calls while the current conversation is in progress, or vice versa, prohibits parallel calls. Second and others callers will be placed in a waiting queue. iPhone owner receives the corresponding sound notification, and can decide whether to start a new conversation or simply connect the person waiting on the line to the current conversation.

• Call forwarding

All in a row: *#21#

When not available: *#62#

When busy: *#67#

Disable all forwarding: ## 002 # + “Call”.



If the subscriber is busy or on vacation, he can forward your calls to another colleague or family member. Use the mentioned secret code and interrogate the iPhone about its current call forwarding settings.

Will be useful

In addition to voice recordings, the option allows you to check the transfer of data and faxes.

• Anonymity

Status: *#31#

Current call: #31 #phone number + "Call"



When initiated outgoing call the owner of an iPhone It is possible to make your phone number available to the receiving subscriber or hide it. Anonymity status can be checked using the first code above.

To initiate anonymous call, the user can edit the list of their contacts directly in phone book, adding the secret code for iPhone #31# in front of the number of a specific subscriber, and then saving it in this form.

*#30#+ "Call"



Displays the number of incoming calls that have arrived on the phone.

• Center number SMS messages

*#5005*7672#+ “Call”



Allows you to get the current operator's text message center number.

On iPhone phones secret codes (a combination of numbers and symbols), which not everyone knows about, work effectively. However, with their help you can easily and instantly display information about the SIM card, connected services, IMEI code and much more on the device screen. In this article, the operation of such codes will be discussed in detail.

Secret codes in action

Secret codes for iPhone are commands that consist of symbols and numbers. They allow you to quickly get necessary information anywhere.

Code *#06# . With its help, the owner of any smartphone can see IMEI number. This command works on all mobile devices.

Code *#21# . This code provides information about activated forwarding of messages, calls and other data. This command also works on all mobile devices.

Code *#62# . It allows the phone owner to find out the number to which incoming calls are forwarded when the iPhone is turned on or the device is out of coverage area.

Code ##002# . The command allows you to disable any call forwarding. As a result, only the owner of the phone will receive calls.

Code *#30# . Displays information about the number of the incoming subscriber.

Code *#33# . Displays information about the blocking of outgoing services supported by the device, such as SMS, calls and other data that the phone owner needs.

Code *#43# . Displays call waiting information on the screen.

Code *#61# . Displays a report on the number of missed calls.

Code *#67# . Displays information about the presentation of the connected identified number.

Code *225# . Displays balance according to tariff plans on a credit basis.

Code *646# . Displays information about calls according to tariff plans on a credit basis.

Code *777# . Displays the current balance, as well as the operator information menu, depending on mobile operator which is used.

Code *3001#12345#* . It is otherwise called the “James Bond” menu. When it is entered, information about the SIM card appears on the screen, signal strength cellular networks. In addition, the phone owner can see the reception indicators cellular signal. Data is promptly updated.

The secret ones discussed above iPhone codes do not work on all devices of this type, because certain services may not be supported certain operators mobile communications.