• Download Annette TV player digital television. Television on your computer - setting up a list of channels for IPTV Player

    Attention!!! Once installation is complete, you will be prompted to change home page browser. Don't forget to uncheck the box.

    IPTV Player- a high-quality player for playing IP-TV channels, with which you will have at hand not only a TV, but also a device for recording your favorite programs, films and shows.

    Possible for each channel customization, and the built-in recording or playback scheduler will help you not to miss the time when your favorite program starts or to record it while you are away

    IPTV (aka DVB-IP or TVoIP) does NOT mean “television broadcast over the Internet”. The beginning of this abbreviation, IP, means only that it is used this protocol data transmission (in this particular case, for transmitting video content), but the entire system is not connected with the World Wide Web by absolutely anything. The IPTV service is provided to you by YOUR PROVIDER, i.e. the company that showed you to your apartment network cable(Ethernet) or installed an ADSL modem. IPTV resembles regular cable television, but it doesn’t come into the house coaxial cable, but over the same channel as the Internet (ADSL modem or Ethernet). If your provider does not provide such a service or provides it only through a set-top box and does not publish a list of channels, then you do not need a player.

    IPTV is the broadcast of channels (usually received from satellites), mainly in MPEG2/MPEG4 formats over the provider’s transport network, followed by viewing on a computer or a special set-top box (Set-Top Box).

    Some providers use stream encryption so that certain channels can only be watched through a set-top box using an identification card or PIN code; the player will not be able to play such a stream. If the provider only sells the service together with a set-top box and encrypts the channels, then the player will also be useless for you.


    Simple and fast deployment in the provider’s network
    - viewing open (unencrypted) http, udp-multicast streams, etc. (partial support for TV tuners via WDM driver)
    - individual settings for channels
    - ability to record a stream to a file
    -OSD ( information window at the bottom of the video window) - volume and channel name, recording indicator
    - list of channels in the video window
    - control video from the keyboard (see the keys in the brief help in the program itself)
    - support for TV programs in JTV format ( automatic download, unpacking, comparison, ability to export to HTML)
    - recording/viewing scheduler
    - background recording any number of channels (limited by the capabilities subscriber line)
    - we ourselves do not provide IP television services, but only give you a player to use the service of your provider
    - the player is not intended for viewing Russian channels from abroad via the Internet
    - the player cannot show encrypted (DRM, CAS) channels.


    Almost all firewalls, such as Agnitum Outpost and Kaspersky Internet Security By default they block IPTV (multicast), as they consider it an attack. In general, it is necessary to enable the IGMP protocol in the system rules and allow IP-TV Player any TCP activity (for downloading channel lists and TV programs) and UDP activity (directly for IPTV).
    Outpost Firewall
    - Menu Settings -> Applications -> Trusted applications -> Add...
    - Specify the path to IpTvPlayer.exe
    - Go to the System tab and in the “Global rules and access to rawsockets” section, click on the Settings button
    - Uncheck the Block IGMP rule
    - Create a rule "Where is the IP protocol and the IGMP IP protocol. Allow this data"
    Kaspersky Internet Security
    - Settings -> Firewall-> Filtering system -> Settings -> Rules for applications
    - Click add and specify the path to IpTvPlayer.exe
    - Click the Template button and select Allow all
    - Go to the Package Rules tab
    - Create a rule "Allow incoming and outgoing IGMP/RGMP packets
    ESET Smart Security
    - Go to the "Advanced Settings" menu by pressing "F5" or "Settings -> Advanced Settings".
    - On the left in the menu, go to the “Personal Firewall” section, in the “Filtering Mode” section, select “Interactive Mode”.
    - On the left in the menu, go to the “Rules and zones” section, in the “Rules and zones editor” section, click the “Settings” button.
    - Create a rule for the "IGMP" protocol: "Name" - any word, "Direction" - any, "Action" - allow, "Protocol" - IGMP.
    - Click "OK" everywhere and close the program, it remains hanging in the tray.
    - Launch "IP-TV player" and "NOD32" will ask for action.
    - Check the box "Remember action (create rule).
    - Open "Advanced parameters" and click the "Custom rule" button: "Direction" - any, "Action" - allow.
    - Click OK.
    Comodo Firewall
    - Protection -> Application Monitor: Specify the path to IpTvPlayer.exe, select "Any parent", check the "Allow any actions by this application" checkbox
    - Security -> Network Monitor: Select "Protocol: IP", go to the "IP Details" tab and select "IP Protocol: IGMP". Move the new rule one position higher so that it is before the "Block" rule
    Windows XP Firewall
    - Control Panel->Security Center->Windows Firewall
    - "Exceptions" tab->Add program->IPTV Player, Ok->Ok
    Firewall Windows Vista, Windows 7
    - Control Panel->Security Center->Windows Firewall (left)->change settings
    - "Exceptions" tab->Add program->IPTV Player, Ok->Ok.

    If your Internet provider provides IPTV services in the form of UDP MULTICAST, then VLC or one based on its libraries, but slightly more convenient to use due to the narrow specialization of IP - TV PLAYER, is probably offered as a recommended player for watching such TV shows. Sergey Troshin sergeytrDShin.ru

    STANDARD SOLUTION

    Other players that are more familiar to the average user, as a rule, simply cannot work with a UDP Multicast stream, and the majority of providers, it seems, have not even heard of IPTV-supporting alternatives. And, in principle, everything would be fine, but against the backdrop of some KMPlayer player VLC looks, to put it mildly, rather weak. VLC itself is quite good in some cases, if not irreplaceable, for example, when playing video directly from a remote FTP server in order to evaluate the quality of the recording. But working with IPTV through VLC does not in any way evoke a feeling of deep satisfaction. It’s buggy and inconvenient, and the picture quality is far from ideal, and the deinterlacing sucks, and - most importantly - it’s clearly missing some essential functions. In particular, VLC plays videos only through its built-in decoders, and it is not possible to replace them with something else.

    Why is this so critical? The fact is that the range of IPTV in lately More and more Full HD channels are appearing, the software decoding of which requires fairly strong hardware. At the same time for IPTV viewing, and Full HD video is ideal on large TVs

    suitable for small, quiet, thin and inconspicuous nettops like the NT minicomputers - series from Foxconn, screwed directly onto back panel TV via VESA mount. But here's the problem - they only play Full HD normally using hardware acceleration, for example using a Broadcom Crystal HD chip. VLC, on the other hand, cannot use not only the still rather exotic Crystal HD decoder, but even the decoders that come with the video card and use its hardware capabilities. As a result, the whole class IPTV devices in terms of high definition, it becomes inoperable due to the frantic load on the processor by the player, although it is precisely on them that it should work in the first place, especially since all the hardware capabilities for this are actually available. Well, don’t allocate a large stationary desktop for IPTV because of this! And what should I do if I am overly sensitive to picture quality and therefore prefer to decode H.264 through the commercial CoreAVC decoder, and MPEG through the BitcontroL decoder?

    Already mentioned IP - TV Player problems, unfortunately, does not solve. In fact, this is just an alternative shell for the same VLC, and although it is a little better suited for watching IPTV - the player’s interface is optimized for this task, but the ambush is still the same - you cannot select codecs, moreover, this player even uses libraries not the most latest version VLC. Although functionally it is really more interesting - here you have the ability to separately configure parameters for each channel, and automatic downloading of fresh playlists from your provider’s server, and support for the TV program, and a recording/viewing scheduler, and other “goodies”. So if we consider only these two players, then a specialized IP - TV Player is definitely more convenient.

    ALTERNATIVE

    And yet there is an alternative. If you scour the Internet thoroughly, you can find several more players that are also capable of working with UDP Multicast - from completely primitive to really very good ones.

    For example, FripTV is the simplest to the point of disgrace free program with control based on the use of hot keys. But it already knows how to work with the CoreAVC decoder. However, to do this you need to copy the CoreAVCDecoder. ah directly to the program directory. FripTV does not have any other advantages, but it is worth keeping in mind for cases with very weak computers- perhaps this particular program will require the least resources, thanks to which Full HD video on this hardware will play most smoothly.

    The Tano player looks better, but it's not much more advanced. In terms of functionality, it is almost similar to IP - TV Player. Yes, and it is also based on VLC libraries, so you cannot select decoders. From interesting features The only thing we can mention is the ability to scan the IP range to search for new channels not announced by the provider. However, the usefulness of this feature is questionable. So there is not much point in the existence of this program. Unless IP - TV Player suddenly refuses to work on your system - then Tapo will be able to replace it.

    Another program that can work with UDP Multicast is SMPlayer, a cross-platform media player with open source code. And although this program looks very powerful and functional, it is terribly clumsy. Yes, here you can also output H.264 video via CoreAVC, but it is impossible to manually set any other options. Moreover, in our case, 90% of TV channels refused to play at all. For the rest, yes useful functions The player has a lot: customizable subtitles, adjustable audio and subtitle delays, switching video and audio tracks, deinterlacing, post-processing, noise removal, karaoke filter, etc. In general, you can experiment, but I wouldn’t recommend hoping for success with SMPlayer.

    There is another VLC-based player - SimpleTV - a very good free program, perhaps even much more successful than IP - TV Player. The functionality is quite decent, downloading the TV program works perfectly, there is a “picture in picture” function, a convenient settings dialog, nice channel logos are automatically loaded, settings can be saved separately for each channel. In a word, everything is very thoughtful and as convenient as possible, so we strongly recommend that you at least just look at this program in action - perhaps this is your search the best option and will end. At least among the VLC shells, this is definitely the best, although not very well known. And most importantly, here you can disable VLC decoders by setting the program to use system codes. And this is already something! If your system has already set the correct decoder priority that suits you best, then this player will play the channels exactly as you need.

    But the most serious alternative player is ProgDVB. This is a whole TV combine, capable of working in addition to IPTV with Internet broadcasting, satellite equipment and TV tuners. Plus search, watch and record YouTube clips. Virtually everything possible options TV in one bottle - very convenient. At the same time, you can even watch several channels at the same time - a TV junkie's dream. There is nothing to talk about other functions like subtitles, teletext, TV guide, timeshift, scheduler and plugins. It's all here. Even the function of broadcasting to the Network and scanning IP addresses in search of a new channel are available here, but the current bitrate indicator is more useful. In short, I personally haven’t seen anything more powerful yet.

    We are primarily interested in IPTV. And here, too, everything is beyond praise. The user is given full control over the playback of channels - here you can specify not only which codec to play video of a particular format through, but in the same way you can choose an audio codec and even a demultiplexer! The demultiplexer, however, unlike codecs, can only be selected from those that come with the program - there are four of them. Moreover, everything works quite stably. But the program takes codecs from those installed on your system, so you can set anything you want - be it CoreAVC, or Broadcom, or Cyberlink. You just need to select the most optimal combination of demultiplexer and audio-video codecs for each option.

    Unfortunately, no matter how hard we tried, the Broadcom Crystal HD hardware decoder did not work for HD channels. It worked on normal resolution channels, but for some reason the program crashed on HD. Therefore, I had to use the DivX decoder on the test nettop

    N.264. But it was possible to work with CoreAVC - it also functioned quite adequately. Another small problem was with the choice of decoder for AAC sound - here only the DivX AAC decoder worked, CoreAAC did not produce sound. MPEG video played perfectly through the BitcontroL codec. By the way, the choice of audio and video renderers is also up to the user - so there is complete freedom for experimentation.

    With player settings special problems no, except that when choosing an encoding for a playlist, you may need to specify, say, UTF8, if the channel names will be displayed in clutter. Or some other encoding. Well, after installing the program, you need to start searching for channels in the “Channel List” menu, after which they will appear on the left side of the program window. Please note: to work with HD channels you need to use the Pro version of the program; the free standard version does not support HD.

    ATTACHING UDP In short, with ProgDVB there seems to be no need to look for anything else. But the problem is that this program in the version that supports HDTV requires money. This is probably its only drawback. Plus, on some systems it, like VLC, may not behave very stable. So if you are a principled supporter of free, legal software, then it makes sense to try to go a different route before forking out money. For example, if you could teach the most powerful KMPlayer to work with IPTV, or the usual Windows Media Player, or even Windows Media Center, for many users this would be even more interesting.

    And this is indeed possible.

    Procedure in in this case there should be a next one.

    First: download a ready-made playlist of IPTV channels from your provider. Make sure VLC works with this playlist and UDP Multicast is working on your PC.

    Then search the Internet and download Elecard AVC Streaming PLugln for WMP. Already after it Windows installations Media Player should play IPTV after loading your playlist into the player - make sure of this. However, WMP is still not very suitable for watching IPTV - you cannot configure the use of one or another decoder in it; to do this, you need to spend a long time using the Gspot and GraphEdit utilities. And the original playlist is displayed extremely inconveniently: in our case there weren’t even channel names, and it’s not at all interesting to sort through it manually. Although, since WMP has learned to work with UDP, it means that Windows Media Center should also make friends with IPTV - everyone can try to check this at their leisure.

    We will continue to develop our idea and try to figure out how to launch IPTV on one of the most popular modern players - KMPlayer.

    In this program you only need to produce a couple additional settings. In the player settings on the "Filters" page in the "DirectShow" section, the first item should be entered:

    And just below, uncheck the “Build a filter graph yourself” checkbox.

    Now you can load a playlist and select desired channel. Please note: by unchecking the “Build a filter graph yourself” checkbox, we have disabled the very convenient ability in the player to select the required decoder for different types video. If, after starting to play a TV channel, you select the “Filters” command in the player’s context menu, you will see that the player uses system codecs in order of their priority.

    So the priority of codecs will still have to be set in the GSpot utility or in DirectShow Filter Manager. But unlike VLC, the choice of codec, albeit crookedly, is still possible. As a last resort, if the Elecard demultiplexer is too persistently “sucking up” some of its own Elecard decoders, you can try stupidly renaming the files responsible for them - you will find them in Program folder Files\Common Files\Elecard.

    In the popular ZoomPlayer, you can also enable UDP Multicast support; to do this, open the player settings and in the Options - Playback - Smartplay - Settings section, enter "elecard" in the line with the "Disable smartplay for files..." parameter.

    And so on. In theory, it should be possible to connect other players with IPTV in this way. The main thing is that an alternative for zombie box lovers actually exists, and you can even choose the most suitable option for you - be it standard VLC, the specialized SimpleTV based on it, the powerful ProgDVB, or even the familiar KMPlayer.

    Using the channel list for the IPTV Player, you can watch television broadcasts on your computer.

    Let's take a closer look at how to set up the player for the first time, where to get IPTV playlists from, and what else you can do in this player.

    Contents:

    What's happenedIPTVand what can it do?

    IPTV is an Internet television protocol that broadcasts TV channels directly to your computer.

    To play content you need a protocol that supports it.

    IPTV provides users with sources for online playback of streaming video, so the speed, quality and accuracy of program display primarily depend on.

    The operating principle of IP television is to send one TV program to the client computer.

    The playback stream only changes if you change the channel.

    Then the system executes a new request.

    Thus, IP broadcasting is faster and higher quality than using a regular TV, which transmits full list channels simultaneously, significantly worsening the final picture quality.

    Internet TV cannot be viewed in a browser because global network – it's just a medium for passing playback links.

    Today IPTV- this is the most best option to view channels based on speed/quality ratio.

    In addition, using Internet TV is absolutely free, does not require connecting to a provider and purchasing expensive TV channel packages.

    • Interactivity . The user can pause channel playback and restart do not lose a piece of ether. Playback will continue from the point where it stopped. This way you won’t miss your favorite movie, show or news broadcast;
    • Minimum number of devices for playback . You don't need a TV or a special transmitter. Only a computer with Internet access and a multimedia player, which can be installed for free;
    • Minimal losses as. Thanks to work digital signal you see a clearer picture. Gradually they began to use digital signal transmission technology, but even today you can still find a lot of devices that support analog technology;
    • Unlimited number of TV channels and programs . Choose a channel from any country and its region. Playlists with hundreds of channels are available online. different languages and any subject. You don’t have to pay money for them, as is the case when using TV channel packages from a provider.
    • Limited number of programs, which work with such data transmission technology;
    • Playlists may become inactive over time, because channel representatives have the right to demand that the source be closed. Because of this, you have to constantly search for the latest IPTV playlists;
    • There are frequent delays in playback. For example, a program on a specific channel of your IPTV player may lag behind the real broadcast by several seconds or minutes.

    SettingsIPTV Player

    To work with IPTV lists, you will need a special player that supports the data transfer protocol.

    The most popular and stable application is This is IPTV Player.

    You can download the program from the official website of the developer using the link http://borpas.info/iptvplayer

    To get started with the program, download and install it on your computer.

    Then open the player shortcut on your desktop or through the Start menu.

    Before you start playing streaming video, you should change a few settings in the program.

    To go to the configuration window, click on the combination CTRL keys and P.

    Then open the general settings tab.

    In the column « Network interface» enter your IP address.

    You can find out by calling your provider or using command line(ipconfig command).

    If you want to connect to the Internet, in the program settings next to the field "Network Interface" select Auto.

    Now the program is ready to work.

    You can download and open IPTV channel lists.

    Application features:

    1 Playing playlists in M3U, HLS, RTMP, UDP, HTTP format;

    2 Applying settings for a channel or the entire playlist;

    3 Convenient mode for viewing the list of available channels;

    4 Automatic unpacking of playlist contents;

    5 You can use any smartphone or tablet as a program control panel.

    BesidesIPTV Player, you can play TV channels usingVLC Media PlayerorAll Player.

    Downloading channel lists

    Downloading and installing a player to watch channels is not enough.

    You will also need to download a special playlist with a list of channels. The most common format for such a playlist is M3U.

    In a search engine you can find a huge number of sites that offer download lists of channels.

    During the search process, the main thing to pay attention to is the date the entry was added on the site - the newer it is, the greater the likelihood of getting a working playlist.

    Over time, access to free stream of channels from the source may be disabled at the request of the copyright holder, so you need to download new channel lists regularly.

    If you've already downloaded a playlist and not all of its channels are working, that's normal.

    As a rule, Each source has a 10%-20% percentage of broken links.

    A few links to the latest playlists from 2017-2018:

    Also, there are special web services where You can download current lists of channels by country.

    On the main page you can select a country, region, or a separate complete list of popular sports channels.

    Self-updating playlists of TV channels in Russian:

    To open a playlist, just double-click on it with the mouse and in the window "Play using..." choose required player.

    You can also launch the application, click on “Browse” and “Open”, and then select the playlist file in the Explorer window that opens.

    A list of available channels with their channels will appear in the main player window.

    Double-click on a list item to start playing the content.

    To manage your video, use the program's navigation panel.

    The Stop, volume, rewind and zoom keys are available.

    IP-TV Player is an application for watching IP television. Provides access only to unencrypted channels. The utility can record streaming video to a file, allows you to quick setup channels and easily control the broadcast using the mouse and keyboard. You can download the player for free using the link below.

    What is IP television?

    IPTV is also called DVB-IP or TVoIP, and many users believe that it is television that broadcasts over the Internet. However, the letters IP simply indicate that this exchange protocol is used to distribute content. digital information. IPTV is similar to regular cable television, with the difference that it reaches the user through the same channel as the Internet. The IP television service is provided by the provider, that is, the company that installed the network cable into the user’s home. IPTV is the broadcasting of TV channels via transport network provider, and the player of the same name is a means for viewing it.

    Initial player setup

    The utility works properly on operating systems 64 bit/32 bit:

    • Windows 7;
    • Windows 8.1;
    • Windows 10

    Most antiviruses and firewalls block the IP player because they consider it a malware attack. Therefore, you should add the application to the exclusion list and allow network activity for it.

    In order for the player to function normally, you will need to configure it.

    1. Launch the program and select “Empty Profile” as the preset.
    2. Go to the “Settings”® “General” menu and load the channel list through the appropriate line. Some providers compile a player distribution package, including their settings and logo. In this case, you can download their version of the application for free with channels. If this is not possible, you will have to look for a list of channels on the Internet.

    1. Go to the “Channel” tab and select the image settings.
    2. Open the “TV program” menu, right-click on it and select “Automatic matching” so that the utility selects the corresponding logos and TV program files.

    Ukraine and Russia have different internet providers, therefore the list of channels will only include television broadcasting from the country in which the user is located.

    Program features

    1. Using a laptop keyboard to control video.
    2. Possibility to connect a smartphone as a control panel.
    3. Record video broadcast to a file in several formats.
    4. Availability of viewing/recording scheduler.
    5. Auto-download of TV programs in M3U, TXT, XMLTV, JTV formats.

    The application can be installed on your computer and configured in minutes.

    On Windows devices, use the free IP-TV Player.

    IP-TV Player is a shell of the famous VideoLAN VLC media player, adapted specifically for watching IPTV.

    In this article we will talk in detail about its configuration and capabilities.

    1. Download

    Some providers - IPTV suppliers - can post modified assemblies of IP-TV Player with an integrated playlist of TV channels on their websites in order to simplify the process of setting up the player as much as possible, thereby pleasing their customers. Why not use such a service provider? On the latter’s website, instead of a playlist, you can download an installer for a modified player and use the preset settings during the installation process.

    If the provider has not shown concern for its customers in this way, the original assembly of IP-TV Player can be downloaded from the player’s official website borpas.info/iptvplayer.

    2. Setting up playlists

    The original build of IP-TV Player comes with the ability to select built-in playlists. At the final stage of installing the player, in the “Select provider” column, you can leave the preset “Internet, Russian TV and Radio” item without changing anything. This is a playlist for a wide audience of users (regardless of their provider) with a selection federal channels and radio stations. The contents of this playlist will be fully available only to residents of Russia; users of other countries will not have access to all TV channels on the list. This option can be used if the provider does not provide the IPTV service or, for example, does it for additional fee. If the provider is an IPTV provider, you can search for it in the drop-down list in the “Select provider” column. The creators of IP-TV Player offer a selection of playlists from the largest providers in Russia and Ukraine.

    If the required provider is not in the drop-down list, you must select the second settings option and enter either the web address of the provider’s playlist, or use the browse button at the end of the line to specify the path to the “.m3u” file. The web address or “.m3u” file of the playlist must first be obtained from the provider’s website. We use the same option for any IPTV playlists downloaded on the Internet.

    After setting up the playlist, IP-TV Player will launch. To select a particular TV channel to watch, you must first display a list of channels in the player window. This is done either by quickly pressing the Enter key twice, or by pressing the L key once, or by pressing the button on the player toolbar. The channel list is removed using the last two methods.

    How can I change the configured playlist in the future? Click the settings button on the IP-TV Player toolbar (or hotkeys Ctrl+P) and in the window that appears, check the box to display all settings.

    IP-TV Player will restart with an expanded list of settings. Work with playlists is carried out in the “General” tab. Here you can select the item “Load preset from the list of providers” and go to the setup stage with a drop-down list of providers, as when completing the player installation. Or you can enter the web address of another playlist in the empty field or use the browse button to indicate the path to it if it is stored on your computer in a “.m3u” file. After this, you need to click the “Update” button.

    Another setting for IP-TV Player playlists is “Switching between channel lists”, it allows you to use the “Add” button, respectively, to add different playlists to the queue so that you can conveniently switch between them if necessary.

    3. List of favorite channels

    IPTV playlists can contain more than 100 TV channels, so the creators of IP-TV Player have provided the ability to create custom lists of favorite channels. When you select a TV channel, it will display an empty heart. Clicking on the heart will fill it, and the TV channel will appear in the list of favorite channels. Access to this list is available at the top of the list of all channels, in a small menu.

    4. Channel surfing

    The channel surfing function in IP-TV Player is designed to automate the search for interesting TV content. To launch it, you need to call up the context menu inside the player (on the video image) and select the appropriate option. A grid of TV channels will appear in the IP-TV Player window, and each of them will turn on in turn for a couple of seconds. As soon as interesting TV content is identified, you can uncheck the “Channel Surfing” option in the context menu.

    5. TV program

    To watch a TV program on the selected TV channel for the coming days, you need to press the clock-shaped button on the player toolbar or the G hotkey.

    6. Aspect Ratio

    If the TV channel image is marred by black mourning stripes along the edges, you can experiment with changing the aspect ratio. When you press the F6 key, the playback image will alternately apply different options aspect ratio.

    And using the F7 key, the picture is adjusted in width to the size of the player window or to full screen mode.

    7. TV channel settings

    You can experiment with the aspect ratio and other parameters of each individual channel in IP-TV settings Player. Turn on the desired TV channel, click the settings button on the toolbar (or hot keys Ctrl+P), switch to the “Channel” tab. Here you can adjust contrast, brightness, saturation, image shades, deinterlacing, audio track (for TV content that supports multi-channel audio tracks) and other parameters.

    The choice of audio track language is configured in the “General” settings tab.

    8. Taking screenshots

    The image played in the IP-TV Player window can be captured by creating a screenshot using the corresponding button on the player toolbar or by clicking hotkey F4. To take screenshots directly from the right sizes The creators of the player have provided the “Video window size” option. This option offers a choice of several screen resolution options, which will be automatically set for the picture played by the IP-TV Player.

    If you need to take a lot of screenshots, in the player settings, in the “General” tab, you can specify a specific path for saving them. The same path will be used to save video recordings of television broadcasts. Below this setting there is another one - “Container format”, in which you can select from the drop-down list the format of the media container into which video recordings of television broadcasts will be recorded.

    9. Video recording of television broadcasts

    In most cases, for video recording of television broadcasts, it is worth leaving the preset PS media container format. In this case, the output videos will be saved in the universal MPEG video format.

    For video recording of TV broadcasts, there is a red button on the IP-TV Player toolbar that starts recording a TV show on the current TV channel and stops it. But the creators of IP-TV Player went beyond this function and provided the possibility of video recording of several television broadcasts in background. If there is an overlap and your favorite TV shows on different TV channels are broadcast at the same time, one of them can be watched online, and the other (and even several TV shows) can be recorded in the background of the IP-TV Player.

    To do this, on the TV channel being recorded (in the list of channels on the right), you need to call up the context menu, select “Record in background” and set the recording time - a specific period or until the user stops manually. And you can switch to another TV channel or close the player altogether.

    If there are active processes recording television broadcasts, when closed, IP-TV Player will be minimized to the system tray, where it will carry out its work in the background without showing any signs. You can stop recording a TV broadcast (or several TV broadcasts) by calling up the scheduler window. The latter appears when you press the “R” recording icon on the TV channel you are recording. The scheduler can also be called using context menu in the player window.

    10. Increasing cache size

    If you experience stuttering while broadcasting IPTV, you can try to solve the problem by increasing the IP-TV Player cache size. In the “General” tab of the settings, in the last column “Cache (milliseconds)” from the drop-down list you need to select a value greater than the preset one - starting from 1000.

    Have a great day!

    Read more: