• Installing, uninstalling or updating codecs is easy! K-Lite Codec Pack: where to download, how to install

    If, when installing a codec, you found a window with a choice of profiles, and you want to customize it as conveniently as possible “for yourself,” then you will have to thoroughly understand all the extensions offered to you.

    From the drop-down menu, select Profile 7: Lots of stuff, and at the bottom you will find a huge number of radio buttons and checkboxes. You, of course, can leave everything there as it is and continue installing your codec, or you can change some settings.

    Here is a description of some of them that are most important to users.

    • Player - in case you use other players. Do not uncheck this sub-item, you will then be able to associate the files during installation with any of your favorite players.
    • Flash Video- FLV is a special bit stream that is special option well-known video standard. This format is supported by most codecs. Select it in order to play these files.
    • VP7 - but it’s better not to uncheck this codec. It is used by many sites to play videos on the Internet.
    • Process raw video - this option is usually disabled. This format supports raw video that is taken directly from the sensor, or video that has not yet been fully processed (usually to avoid loss of information). In this form, you receive video from some types of video cameras, recorders, and so on.
    • In the DirectShow audio decoding filters sub-item you will select audio filters. In almost all cases, ffdshow is preferable.
    • MP1, MP2, MP3 are familiar compressed audio files. Leave it unchanged.
    • AAC is a special audio format for YouTube, iPhone, iPod, iPad, Nintendo DSi, iTunes and so on.
    • Other audio formats - in this column we select preferences for other audio formats.
    • Process uncompressed audio (PCM) is uncompressed audio processing and is disabled by default.
    • For avi, matroska, mp4 and flac formats use standard settings, they are set to the best by default.
    • The Tools column contains all the tools. Check the boxes next to all the tools, you will figure it out as you go, many of them may be needed completely unexpectedly. The set of tools will not burden the program or your computer at all.

    In this manual we will look in detail K-Lite setup Mega Codec Pack - himself popular package codecs. For experienced users This material may seem useless, but beginners often have problems installing this kit.

    Download the codec pack K-lite Mega Codec Pack from the official website. Install the codec package, closing all programs. In the first installer launch window, click Next. In the next window, check Advanced Mode (All options are shown)— Advanced mode (all options are shown). Click Next again.

    The main window will appear in front of you with settings K-Lite programs Mega Codec Pack. From the top drop down menu select Profile 7: Lots of stuff- the most complete installation. Most often, users leave the settings “as is”, but you can also change the settings to suit yourself, in which case the profile name in top line will change to Custom Selection. The default settings are well optimized, so whether to change anything in them or not, decide for yourself, I’ll just explain some of the nuances. Please note that when selecting settings, the recommended ones come first.

    Attention! Also in the profile selection menu you will see the inscription (without player) - (without player). If you select a profile with this name, then you do not agree to the installation of the player Media Player Classic and you will use the player installed on the system. It's up to you to decide, but I recommend it for video playback.

    When choosing the option with a player, you will be offered two editions of the famous media player Player Classic(Regular - Normal) and (Home Cinema - Home Cinema). I prefer to use the second option accordingly.

    What filters to use in K-Lite Mega Codec Pack

    Now let's move on to considering the proposed filters for playing media files. To make it clearer for you:

    Filter is a media decoder used for video decoding, supporting many video and audio formats. IN present moment most popular filters - ffdshow And LAV.

    Just the same, the second subsection after selecting the player will be DirectShow video decoding filters - DirectShow video decoding filters (DirectShow is an interface for implementing these filters in Windows environment). To use all kinds of video standards (eg H.264), K-Lite Mega Codec offers several options.

    I won't go into detailed comparison filters used, at your discretion you can use both ffdshow and LAV, both projects are worthy of choice.

    I'm a supporter LAV Filters and I will list them advantages, but also disadvantages :

    • Large set of video decoders, high quality.
    • Based on ffmpeg, like the ffdshow filter, but unlike ffdshow, multithreading is implemented.
    • Includes the author's own development of a CUDA decoder for Nvidia video cards.
    • Supports exotic profiles Hi10P, Mpeg 4:2:2, etc.
    • Bitstream support. TrueHD and DTS-HD support.

    Flaws:

    • Inferior to ffdshow in the absence of post-process filters.
    • It is advisable to use for not too heavy video files; for FullHD video use DXVA decoders.

    In the section DirectShow audio decoding filters sets of filters responsible for audio decoding are presented. I recommend using LAV or ffdshow.

    Utility for switching audio tracks

    In addition to a set of filters for each video and audio format, you need to select splitter ( in subsection DirectShow source filters), which divides the stream of information received from the container it supports (the most common containers are *mkv, *m2ts, *ts and of course *avi), into video, audio and subtitles, which are transmitted to the corresponding decoders. The splitter allows you to choose soundtrack and subtitles for playback. It is important to immediately understand that not all splitters work equally well with decoders. This is one of the main reasons why you will have to think about your choice. I can recommend you Haali Splitter or LAV Splitter.

    You can leave all other parameters as default. Click Next, a window will appear asking you to select a folder for the location, click again Next. In the next window Select Additional Tasks(Select Additional Tasks) will display options for the components you select, so their complete composition may vary.

    Important points in the additional tasks window:

    • Reset all settings to their defaults — the settings of all components will be reset to the recommended ones (the option is relevant when updating the codec package).
    • Additional shortcuts— additional shortcuts, for Media Player Classic on the desktop (Desktop) and/or on the panel quick launch(QuickLaunch) and a shortcut for the Codec Tweak tool.

    ffdshow configuration (ffdshow filter settings)

    • Hide systray icons- hide system icons, when playing a video file, ffdshow works, and icons appear in the system tray providing quick access to its settings. By checking the box, you will disable the display of icons.
    • Restrict usage to whitelisted applications- in ffdshow there is " whitelist» applications compatible with this filter, respectively, there is also a “black list”. By checking the box, ffdshow will only be able to use programs from the “white list”.
    • Force RGB32 output— when this option is activated, ffdshow will output video in the RGB32 color space. This is necessary to configure color display, but this option loads the processor.
    • Volume normalization— volume normalization, this option is useful if the volume level is very low. But I advise you to check the box in the settings of the Media Player Classic player (the option is described below).

    Haali Media Splitter configuration (Haali splitter settings)

    • Hide system icon- hide system icon in the tray. Check the box to switch between audio streams and subtitle languages ​​from the tray without going into the player menu.

    Media Player Classic configuration

    • Video renderer— I advise you to choose the EVR or madVR renderer.

    Renderer (or renderer) is a program that renders (obtains an image).

    • Use internal subtitle renderer— use the built-in renderer for subtitles. Configuration is required to use hardware acceleration.

    DirectX Video Acceleration(abbreviated DXVA) - an interface designed for video decoding by a video card processor.

    • Use high rendering resolution— includes high definition subtitles.
    • Enable internal MPEG-2 decoder— use internal MPEG-2 decoder. For example, you are satisfied with the decoder in an already installed third-party player.
    • Volume normalization— sound normalization.
    • Install language files for MPC—install language files to enable desired language, you need to go to the bookmark View - Language.

    Tweaks

    • — allows you to select static, animated and animated with buffered subtitles.

    There may be more items in this window, depending on the settings. If you have any questions, write in the comments. Now press the button Next and go to the Hardware Acceleration window . You will need to select filters for the H.264 and VC-1 standards. For owners NVIDIA video cards select LAV Video - NVIDIA CUVID in both items (models older than 8800GT), for users ATI video cards— LAV Video DXVA2 native (models starting from the HD series). We set None only if neither CPU, neither the video card support hardware acceleration video. Other options must be selected depending on your PC configuration and codec package settings. Good reviews has ffdshow DXVA Decoder, and a lot depends on the combination: the renderer used and the HD video processing filter.

    In the next window, you can select the software player with which you would like to associate your media files, that is, which player to play.

    Click Next, check the boxes next to the required multimedia format for each player selected in the previous window. Click again Next and select your speaker configuration.

    Click again Next, the window will display the configuration you selected for installation. Click Install, wait for the package to install. After installation, you will be asked to check the boxes for those filters that you can customize at your discretion. Click Finish.

    P.S. Check the functionality of your player. If you have any problems, write in the comments below.

    What is a codec? A codec is a device or program capable of performing data or signal conversion. Simply put, a codec is an intermediate stage between the screen and the movie file, which will help you watch the movie.

    Why are codecs needed? Often the player refuses to play videos or shows the image without sound. This may mean that you do not have the codecs that are needed to convert this stream: the system cannot find a way to decode this file.

    Previously, when codecs were not friendly with each other, there were a huge number of manufacturers and formats, you had to download each codec for each format separately, having first spent time and effort finding all these files.

    But then someone thought of combining all these codecs into a single installation kit. The most popular collection of such codecs is named K-Lite Codec Pack. This universal kit codecs and programs for viewing and processing audio and video files, which helps both convert video files and view them. The K-Lite package also includes some utilities for displaying information about media files, calculating bitrates, etc. The K-Lite Codec Pack is distributed absolutely free of charge.

    Installing K-Lite Codec Pack

    Let's look at specific example how to install K-Lite Mega Codec Pack 11.0.0 correctly.

    1. Double click run the file K-Lite_Codec_Pack_1100_Mega.exe. You will see the installation start window. Click the button Next.

    2. A window will appear asking you to check for updates. If you don't want to check for updates, uncheck the Perform quick upgrade checkbox. Click Next.

    3. After clicking the Next button, you will be taken to the menu for selecting components to install. If you do not know which components are best to choose, leave everything as is and move on to the next installation item by clicking the Next button. (For complete installation All components of the K-Lite Codec Pack will require approximately 59.9 MB free space on disk.)

    4. A window will appear asking you to assign associations of audio/video files to players. If you have already assigned associations with other players, uncheck the Create file associations checkbox so as not to reset your settings. If you want to reset all settings, check the Reset all settings to their default checkbox. We leave the rest of the settings as default. Click on the button Next.

    5. In the next window, do not change anything and click on the button Next.

    6. A window with the settings of the Media Player Classic player will appear. Leave everything as default and click Next.

    7. A window will appear with the ability to select the program language. The first language (Primary language) select Russian (Russian), the second language (Secondary language) select English (English). Click Next.

    8. At this stage, select the video player. If you don’t know which one to choose, uncheck all the boxes or leave Media Player Classic (x86). Click the button Next.

    9. A window with Audio settings will appear. Leave everything as default and click Next.

    10. Settings are complete. Click the button Install, starting the installation process. Here you can still change something by clicking on the button Back.

    11. After the process is completed, click on the button Finish.

    The installation is complete.

    In this lesson we will install k-lite codec codecs on your computer.

    I think that everyone has had this situation when you open a video or try to do something in a program, and a message pops up that says this or that codec is not installed on your computer. Today we will solve this problem.

    Now codecs are distributed mainly in the form of packages. The most common in in this case is a package called K-Lite Codec Pack. In order to download this package, go to the website and go to the "Download" section.

    Depending on the set of codecs and utilities, there are several versions of the package: Basic, Standard, Full and Mega. I think that the Standard package is enough for us, so on the page that opens, follow the “Download Standard” link. It is also recommended by the site itself.

    On next page we choose a hosting from which we will download codecs. Let's download the file from digital-digest.com. Follow the link to the left of this hosting as in the picture below.

    On the website that opens, you need to follow the “Click Here To Download” link.

    Now all you have to do is save the file to your computer. Once the download is complete, run the codec installation. To do this, go to the folder with the file and double-click on it with the left mouse button. Let's walk through the installation steps a little. We will click on the Next button everywhere and focus only on some settings. At the "Installation Mode" step, select "Normal mode" - installation of codecs in normal mode, which does not require additional knowledge and settings from you.

    On the "File Associations" page you need to select which player the association will be made with, i.e. through which player the file formats selected in the next step will automatically open. You can choose Media Player Classic, which is included in the k-lite codec pack, or leave the usual one Windows Media Player.

    Since the ultimate goal is to install codecs, the remaining installation points that are not very playable important role, in principle, you can skip it by pressing the Next key. Upon completion of all installations, press the "Install" button to begin the installation.

    The K-Lite codec pack also includes 2 useful utilities: MediaInfo and Codec Tweak Tool.

    Codec Tweak tool- This utility manages the package. Through it, you can update the codec package itself, as well as correct errors that may arise when working with audio and video files. To check for updates, select the “KLCP update check” item, and in order to correct errors, click the “Fixes” button.

    MediaInfo- a utility that allows you to find out information on video and audio files. Simply select the file by clicking on the special line.

    And we get information about the file. Perhaps it will be very useful for you.

    You can find these utilities on your computer by searching in the Start menu. Open the menu and type the name of the required utility in the line.

    You don't need to expect anything more from installing codecs. The principle works here - set it and forget it.

    If you still have questions or have difficulties installing codecs, then below you can watch a video lesson on the topic of this lesson.

    I'm sure you know this feeling when your computer is constantly loading something. You seem to be doing nothing, but it constantly loads and loads. If the answer is “Yes,” then in this lesson I’ll tell you where to look what’s in at the moment loads your system.

    In this lesson, I will tell you how you can add the “Run” command to the “Start” menu if you don’t have it there.

    K-Lite Codec Pack– popular free codecs for computers running Windows 7, 8, 10. A new version of all the codecs needed today in one, complete assembly will come in handy for your computer more than ever. Having installed this package you can play all multimedia files, both video and audio. The package also includes encoders for converting video files into popular media formats. The main thing is that these codecs are universal and will solve problems with playing any known media files. You can download K-Lite Codec Pack for Windows for free on our website, without registration or SMS.

    Codecs will be a great find for beginners, since its installation does not require deep knowledge in the field software. It is no longer news that without such programs it would be impossible to imagine freedom when working with multimedia on your home computer. We recommend that you remember to update the codecs in your Windows, as this will prevent you from encountering errors when playing new file formats, and you will always be able to enjoy new cinema technologies. To download K-Lite Codec Pack you need to follow the direct link provided in our article.

    How to install codecs

    Installation of codecs has automatic or manual mode for advanced users. For those who are little familiar with the principles of installing programs on a computer, we recommend using automatic mode. You just need to follow the installer's instructions. For manual installation knowledge of your operating system, as well as information about the availability of preinstalled codecs. When installing them, you always have access to selecting and changing the types of programs to be installed. We recommend deleting earlier installed codecs, before installing new version K-Lite Codec Pack for Windows.

    Read more: