Installation and configuration of the GS B520 receiver. Software (firmware) GS B520

Firmware version

Description

Software version 3.16.293, GS1 0.0.141 for USB updates GS B522 receiver software.

The capabilities of the receiver's main menu have been significantly expanded. The menu appears when the receiver starts (the appearance can be disabled in the "Settings" section ->

72.4 MB
09.10.2018

Attention!

Version: STB 3.16.293, GS1 0.0.141

File name: b520.upd
Checksum:
File name: b520_gs1.upd
Checksum:

The capabilities of the receiver's main menu have been significantly expanded. The menu appears when the receiver starts (the appearance can be disabled in the "Settings" -> "Interface" section) and can also be called up by pressing the "Menu" button.
Changes in the design of the “Cinema”, “Best on TV” and “TV Guide” applications.
The "Menu Editor" application has been removed.
Fixed duplication of satellite and OTT versions of channels in the Popular Channels application.

Turn on the receiver's power. After loading, make sure that no graphics are displayed on the screen, including help messages.
Wait until the update request appears on the screen, click "OK". The update process will begin.
After the update process is completed, the receiver will automatically reboot.

Software version 3.15.448, GS1 0.0.128 for USB software update for GS B522 receiver.

Changed from previous software version:

72 MB
31.07.2018

Software version for USB update of main software and GS1 module software of B520 and B522 receivers. Attention!
Return after update previous version Software will be impossible!

Version: STB 3.15.448, GS1 0.0.128

File name: b520.upd
Checksum:
File name: b520_gs1.upd
Checksum:

Changes compared to the previous version:

The Cinema Halls application has been redesigned, including the ability to pay for films from a personal account through the application or using a QR code.
The "Settings Wizard" application has been changed: the "Satellite only" mode has been added.
An indication of the recording mode has been added to the InfoPanel application.
The function of constantly displaying the clock on the screen has been returned.
The B531M/B532M/B533M/B534M strength/quality scales have been calibrated.
Added indication of receiving remote control commands on the front panel of the receiver.
To simplify access to service management, the authorization mechanism in the “Personal Account” has been changed.
In the "Best on TV" application, a display of the recording date and time has been added.
The "Tricolor TV Magazine" application has been removed.

Procedure for USB software update of B520,B522 receiver:

Attention! It is prohibited to change the update sequence!

Turn off the power supply to the receiver.
Turn on the receiver's power. After loading, make sure that no graphics are displayed on the screen, including help messages.
Insert into receiver USB drive, containing only the file "b520.upd" in the root directory.
Wait until the update request appears on the screen, click "OK". The update process will begin.
After the update process is completed, the receiver will automatically reboot.
Turn off the power supply to the receiver. Remove the USB drive. Copy the file "b520_gs1.upd" to it.
Turn on the receiver's power. After loading, make sure that no graphics are displayed on the screen, including help messages.
Insert a USB drive into the receiver containing the file “b520_gs1.upd” in the root directory.
Wait until the update request appears on the screen, click "OK". The update process will begin.
After the update process is completed, the receiver will automatically reboot.
After rebooting, you can remove the USB drive.

Software version 3.14.69, GS1 0.0.126 for USB software update of the GS B522 receiver.

Changed from previous software version:

For IP channels, the ability to view the archive of TV programs (Service "TV Archive") and view the current program from the beginning (Service - "Watch from the beginning") has been added.

72.6 MB
07.05.2018

Software version for USB update of main software and GS1 module software of B520 and B522 receivers. Attention!
After updating, it will be impossible to return the previous version of the software!

Version: STB 3.14.69, GS1 0.0.126

File name: b520.upd
Checksum:
File name: b520_gs1.upd
Checksum:

Changes compared to the previous version:

For IP channels, the ability to view the archive of television programs has been added (Service "TV Archive") and view the current program from the beginning (Service - "Watch from the beginning").
The design of the "Channel List", "Info Panel" and "TV Guide" applications has been changed.
The application has been redesigned Personal account".

Procedure for USB software update of B520,B522 receiver:

Attention! It is prohibited to change the update sequence!

Turn off the power supply to the receiver.
Turn on the receiver's power. After loading, make sure that no graphics are displayed on the screen, including help messages.
Insert a USB drive into the receiver containing only the “b520.upd” file in the root directory.
Wait until the update request appears on the screen, click "OK". The update process will begin.
After the update process is completed, the receiver will automatically reboot.
Turn off the power supply to the receiver. Remove the USB drive. Copy the file "b520_gs1.upd" to it.
Turn on the receiver's power. After loading, make sure that no graphics are displayed on the screen, including help messages.
Insert a USB drive into the receiver containing the file “b520_gs1.upd” in the root directory.
Wait until the update request appears on the screen, click "OK". The update process will begin.
After the update process is completed, the receiver will automatically reboot.
After rebooting, you can remove the USB drive.

Software version 3.11.303, GS1 0.0.106 for USB software update of the GS B522 receiver.

Changed from previous software version:

Added new service"Best on TV"
Added feature fast switching broadcast source using the blue remote control button for channels that have an alternative source.
Bugs fixed.

71.2 MB
09.02.2018

Version: STB 3.11.303, GS1 0.0.106

File name: b520.upd
Checksum:
File name: b520_gs1.upd
Checksum:

Changes compared to the previous version:

Added a function to automatically turn off the receiver when the user is inactive (Menu->Settings->Interface->Automatic shutdown).
Bugs fixed.

Procedure for USB software update of B520,B522 receiver:

Attention! It is prohibited to change the update sequence!

Turn off the power supply to the receiver.
Turn on the receiver's power. After loading, make sure that no graphics are displayed on the screen, including help messages.
Insert a USB drive into the receiver containing only the “b520.upd” file in the root directory.
Wait until the update request appears on the screen, click "OK". The update process will begin.
After the update process is completed, the receiver will automatically reboot.
Turn off the power supply to the receiver. Remove the USB drive. Copy the file "b520_gs1.upd" to it.
Turn on the receiver's power. After loading, make sure that no graphics are displayed on the screen, including help messages.
Insert a USB drive into the receiver containing the file “b520_gs1.upd” in the root directory.
Wait until the update request appears on the screen, click "OK". The update process will begin.
After the update process is completed, the receiver will automatically reboot.
After rebooting, you can remove the USB drive.

Software version 3.9.325, GS1 0.0.106 for USB software update of the GS B522 receiver.

Changed from previous software version:

Added the ability to view channels from an alternative (IP) source (required wired connection to the Internet).
The logic for working with favorite channel lists has been changed.
Added a function for pre-registering receivers (the function is active for receivers that have not yet been registered).
Added a function to automatically turn off the receiver when the user is inactive (Menu->Settings->Interface->Automatic shutdown).
Bugs fixed.

52.7 MB
06.09.2017

Version: STB 3.9.325, GS1 0.0.106

File name: b520.upd
Checksum:
File name: b520_gs1.upd
Checksum:

Changes compared to the previous version:

Added the ability to view channels from an alternative (IP) source (requires a wired Internet connection).
The logic for working with favorite channel lists has been changed.
Added a function for pre-registering receivers (the function is active for receivers that have not yet been registered).
Added a function to automatically turn off the receiver when the user is inactive (Menu->Settings->Interface->Automatic shutdown).
Bugs fixed.

Procedure for USB software update of B520,B522 receiver:

Turn off the power supply to the receiver.
Turn on the receiver's power. After loading, make sure that no graphics are displayed on the screen, including help messages.
Insert a USB drive into the receiver containing only the “b520.upd” file in the root directory.
Wait until the update request appears on the screen, click "OK". The update process will begin.
After the update process is completed, the receiver will automatically reboot.
Turn off the power supply to the receiver. Remove the USB drive. Copy the file "b520_gs1.upd" to it.
Turn on the receiver's power. After loading, make sure that no graphics are displayed on the screen, including help messages.
Insert a USB drive into the receiver containing the file “b520_gs1.upd” in the root directory.
Wait until the update request appears on the screen, click "OK". The update process will begin.
After the update process is completed, the receiver will automatically reboot.
After rebooting, you can remove the USB drive.

Software version 3.7.304, GS1 0.0.88 for USB software update for GS B522 receiver.

Changed from previous software version:

Improved stability.
Bugs fixed.

After updating, it will be impossible to return the previous version of the software!

If “Error 4” occurred while updating the software of your receiver, it is recommended to select channel number 333 on the receiver, and then confirm the start of the second stage of the update.

If the TricolorTV receiver does not have channel No. 333, you must perform a “Search for Tricolor TV channels” or reset the receiver settings to factory settings.

If you are unable to update the software of the Tricolor TV receiver yourself, it is recommended to contact the Tricolor TV Subscriber Support Service or your dealer.

51.6 MB
05.06.2017

Software version for USB update of main software and GS1 module software of B520 and B522 receivers. i>Attention!
After updating, it will be impossible to return the previous version of the software!

Version: STB 3.7.304, GS1 0.0.88

File name: b520.upd
Checksum:
File name: b520_gs1.upd
Checksum:

Changes compared to the previous version:

The capabilities of the Tricolor TV Cinemas application have been expanded.
Improved stability.
Bugs fixed

Procedure for USB software update of B520,B522 receiver:

Turn off the power supply to the receiver.
Insert a USB drive into the receiver containing only the “b520.upd” file in the root directory.
Turn on the receiver's power. After loading, make sure that no graphics are displayed on the screen, including help messages.
Wait until the update request appears on the screen, click "OK". The update process will begin.
After the update process is completed, the receiver will automatically reboot.
Turn off the power supply to the receiver. Remove the USB drive. Copy the file "b520_gs1.upd" to it.
Turn on the receiver's power. After loading, make sure that no graphics are displayed on the screen, including help messages.
Insert a USB drive into the receiver containing the file “b520_gs1.upd” in the root directory.
Wait until the update request appears on the screen, click "OK". The update process will begin.
After the update process is completed, the receiver will automatically reboot.
After rebooting, you can remove the USB drive.

Another receiver model from the company, created for participants in equipment exchange programs. The device supports high-definition format, which means it is recommended for those who want to change the usual television, adding color and realism to it. The GS B520 receiver from Tricolor promises to be one of the most reliable set-top boxes with a wide range of functions and capabilities.

Equipment characteristics

The GS B520 receiver combines ergonomic classic design, as well as modified software taking into account the errors of previous models. At the same time, the characteristics are selected optimally for comfortable use by the modern consumer. The receiver can be connected to the Internet via Wi-Fi router V home network, and will also open up opportunities for viewing content on smartphones and tablets, thanks to mirror streaming features. However, this will require installing the “Play.Tricolor” application on mobile devices.

The provider claims high speed operation of the equipment and absolute security from unauthorized access to information.

This is due to the use powerful processor MStar K5 and modified software environment from the GS Group holding. The GS B 520 set-top box is equipped with a USB connector for connecting external drives and additional devices. The connector for connecting an external infrared sensor allows you to install the receiver behind obstacles without losing control of the remote control.

Installation diagram

The Tricolor GS-B520 receiver does not have fundamental differences from previous models in functional connectors, so the connection occurs according to the standard scheme.

The primary factor during installation is the installation of the antenna, but given the fact that the equipment is exchangeable, the dish should already be installed. This means it’s worth talking about how to connect the receiver itself directly. Quick Guide to action looks like this:

Set-top box software update

Tricolor TV plans to soon release an update to the previously installed software for the B520 receiver. It will take into account problems with controllability, and the new environment will also allow accepting satellite signal more confident. The instructions on how to update the software yourself are quite simple. You can do this in three ways:

via satellite;
using a computer;
using a flash drive.

From satellite

According to the manufacturer, updating via satellite is the most logical option.

It is important not to turn off the equipment or interrupt the boot process, otherwise malfunctions may occur.

This option has a significant drawback: the process can take time. from 5 minutes to several hours, it all depends on the quality of the signal and the weather conditions affecting it.

It is necessary to disconnect the receiver from the network and reconnect it to the network.
Turn on information channel"333".
Confirm the need to update the software.
After the download is complete, return to channel “333” and confirm the download of files for flashing the module.
After the reboot is complete, you should perform basic settings and search for channels.

Via computer

To flash the receiver via a computer:

It must be connected to the PC using a USB cable in a disconnected state.
Install the “GS Burner” program by downloading it from the provider’s website, and also do not forget about the corresponding files with the software. They can be found by model name.
After launching the program, you will need to specify the path to the files by opening the “Open File” tab.
Click “Upload” and connect the set-top box to the network. The installation completion will be indicated by a 100% loading bar.

Using a flash drive

If for some reason this procedure was not successful, the program version will remain the same. The situation will be corrected by a flash card with the same installation file. The description of the action algorithm is as follows:

The drive is placed in the appropriate slot for formatting.
After the firmware is copied to the memory card, the flash drive can be removed and the receiver turned off.
Place the drive with the file in the slot and turn on the receiver. The update steps will be displayed on the TV screen.
After successful installation, a reboot and basic settings will be required.

Summing up

Users have already appreciated the GS B520. According to most, this is one of the most reliable devices from Tricolor. It meets the requirements for modern digital equipment. No significant shortcomings were found during operation, including with the power supply, which is typical for the company’s set-top boxes. By participating in the exchange program, you can receive a set of equipment at a price of 5,700 rubles.

GS B520 overview of receiver applications and functions

We have already shown you this receiver in our photo and video reviews, we checked it from all sides, looked at what it has inside. And after one of our videos, which we made and posted online, a suggestion appeared - it would be nice to look at the menu and all the applications in the GS B 520 receiver in more detail. Today in this review we will collect all our videos on the applications of the GS B 520 receiver and show them to you. We will talk in more detail about almost every application. The main thing is not to forget, this receiver is recommended for watching the operator’s TV channels (NJSC NSK - non-public joint stock company"National Satellite Company" legal education, brand owner ")

Let's start the GS B520 review of the applications and functions of the receiver with an overview video in which we will go through the entire menu of the GS B 520 receiver.

GS B520 overview of applications and functions of the new exchange receiver.

To do this, we connected our receiver to the TV and began filming everything, now you can watch everything for yourself and draw certain conclusions for yourself.

GS B520 overview of applications and functions of the receiver, in this first application review video you can see all the applications that are on the GS B 520 receiver, then we will talk about each application in more detail.

Let's start the GS B520 review of applications by checking the operation of the receiver with an external drive; for this we need a USB flash drive on which we have prepared various files and folders in which there are videos and pictures in different formats.

We need this in order to check and see what the GS B 520 receiver can work with and what it cannot.

Next we will look in more detail at how the GS B 520 with the recording function works; for this we will need a USB flash drive or an external hard drive.

We will use a flash drive. Let's check how the registration is going on television channels, we will see what messages the receiver shows when recording starts and when we need to stop recording. At the same time, it will be clearly visible what happens when recording is prohibited by the operator (NJSC "NSK" - non-public joint stock company "National Satellite Company" legal entity, owner of the brand).

In this video we will see how the TV channel editor application works, it is possible that it will be useful to some of the users of this receiver.

This video shows the operation of an application that will help you change the receiver menu; with this application you can remove or add one or more applications from the main page.

We couldn't ignore one important application. In which you can see what subscription you have. What is your personal receiver number and what software do you have.

This application is a personal account. Let's try to talk about its importance and functionality in a nutshell.

After looking at the information from your personal account, we move on to another application. Which shows us which films are currently on and which will be on the screens of a group of TV channels in the near future - a cinema hall. As you can see, there is nothing complicated here. The controls are simple and intuitive.

We also wanted to turn our attention to the application - manual search for TV channels.... It’s possible that someone doesn’t need it... But of course many people need this application. There was a time when this application was removed at the request of the operator. But after a while, when there were a lot of bad reviews and subscribers, they demanded to return it. GS had no choice but to return it. Now you can see it in the menu of receivers as new (for example GS B520). So are those that were sold a long time ago (for example GS B210, GS U510). With this application you can add several new TV channels. Of course there is also technical point- is yours capable satellite dish catch them.

* The operator’s logo is present on the screen of the tested TVs during the performance test. (NJSC "NSK" - non-public joint stock company "National Satellite Company" legal entity, brand owner)

Module software 0.0.141

ATTENTION!

Do not turn off the receiver's power until the update procedure is complete! Otherwise, the receiver may fail!

It will be impossible to return the previous version of the software!

Software update via USB drive (flash drive)

If your receiver is not connected to satellite dish, then you can update the software via a USB drive. Before downloading software to a flash drive, it must be formatted in FAT32. In the downloaded files you will also find detailed instructions on installation.

Software update via satellite step by step

To update software via satellite, the receiver must be connected to a configured satellite dish.

The software update consists of two components: updating the main receiver software and module software.

ATTENTION! If you are using a GS C591 or GS C5911 client receiver with the server receiver, you must update the software on the client receiver before updating the server receiver software. Instructions for updating the client receiver.

PROCEDURE:

1.Unplug the receiver's power cord from the outlet, and then plug the receiver back into the power supply.

2. Switch the receiver to channel number 333 general list.

3. After a few seconds, the following message will appear on the screen indicating the need for a software update:

After the appearance of this message select "OK" to start the update.

4. Update progress.

After agreeing to update the receiver software, service messages about the update process will appear on the screen. Updating the receiver software takes about ten minutes.

5. Once the update is complete, the receiver will reboot and turn on with the new software version.

ATTENTION! For the GS C592 receiver, this will complete the update as it does not require a module update.

6. For other models: after turning on the receiver, switch it again to TV channel 333 in the general list. Within one minute, the following message will appear on the screen indicating the need to update the module software:

7.When this message appears, select “OK” to begin the update. Updating the module software takes about five minutes.

8. Once the module software update is completed, the receiver will automatically reboot.

Once the software update is complete, verify that the update was successful.
To do this, go to the “Personal Account” application (“Menu” -> “Personal Account”) and check the values in the lines “Receiver Software Version” and “Module Software Version”.
The update was successful if the following data is displayed:

Receiver software version - 3.15.448
Module software version - 0.0.128

At this point, the software update of the receiver and module is completed, and the receiver is ready for further operation.

Instructions for updating receiver software via the Internet

Before starting the update, make sure that your receiver is connected to the Internet.

To do this, you need to connect the Internet cable to the corresponding connector of the receiver (Ethernet).

If your receiver model has more than new version software, a message prompting you to update the software* will appear on the TV screen on any TV channel you are watching. Confirm the start of the update and wait for it to complete.

Please note: the software version number may vary depending on the hardware model.

During the software update, the following information will be displayed on the screen: “Attention! Do not turn off the receiver's power during the update." Disconnecting the equipment from the network may cause it to malfunction.

The software update takes on average about 5 minutes, the duration depends on the speed of the Internet connection.

After the update is installed, the receiver will reboot

Please note: if your receiver also has a module software update available, you may again be prompted to update on your TV screen, which you will need to confirm. Upon completion of the module software update, the receiver will reboot again, after which it will be ready for further operation.

Please note: the module software version number may vary depending on the hardware model.

How to update the Tricolor channel list on gs b520, gs b522, gs b521, gs e521l, gs b531m, gs b532m, gs b521h, gs b521hl, gs b531n, gs b534m receivers

To find new channels, do the following.

The GS B520 receiver is one of the new developments of the Tricolor company. The device is designed for the trade-in program (exchanging old equipment for new). When replacing old SD receivers with modern models HDTV format, the current subscription to Tricolor TV services is maintained.

The GS B 520 single-tuner receiver allows access to watching TV on mobile devices.

receiver Tricolor GS B520;
power unit;
instructions;
connecting cord;
remote controller.

The approximate cost of the set is 3000 - 6000 thousand rubles.

Characteristics of the set-top box

The tuner supports DiseqC, and it is also possible to select and configure satellites yourself. Previously, this option was only available on the GS-9305 model. The device supports HD, so the picture broadcast by the TV high quality. In addition to the tulip cable, you can connect an HDMI cable.

This is the first receiver of the provider to implement the “Record” and “Delayed View” options. To use this feature, necessary for the console B520 operator Tricolor connect flash drive . The set-top box also reads other files from the flash drive, for example, you can view photos and listen to audio recordings.

The console has built-in applications: games, timer, TV guide. Can be installed additional programs. The USB connector is located on the front side of the tuner, which provides more convenient connection of various media.

Detailed technical specifications can be studied in the operating instructions, where it is given full description and all the necessary information is provided.

Design

The design of the receiver is made in a classic and simple style, the color is black, glossy. On the front panel there is a button to turn the tuner on and off, as well as a digital timer; the remaining connectors are located on the rear side. The receiver is small in size, the ventilation zones are located on the top cover.

Watching video content from mobile devices

To watch operator television on mobile device or tablet, the set-top box requires an Internet connection. And the “PlayTricolor” application must be installed on your smartphone.

Subscribers who do not know how to connect the set-top box to the Internet or install it are recommended to study the USER GUIDE.

Firmware

To update the software you need:

Disconnect the receiver from the power supply.
Insert a flash drive with the file b520.upd
Turn on the device. There should be no graphics or SMS notifications on the TV monitor.
After a while, an update request will appear on the screen, confirm it by clicking “ok”.
When the device update is completed, the tuner will automatically reboot.
Disconnect the receiver, remove the flash drive from it and copy the file b520_gs1upd.
Turn on the set-top box.
Insert the flash drive with the file b520gs1.upd.
The update process will start.
When finished, an automatic reboot will occur again.
The device update is complete.

Advantages and disadvantages

The console is equipped with all the necessary functions and options.

The advantages include:

high image quality;
ease of use;
technical equipment;
stylish design;
protection against piracy.

The main drawback is the long pause when switching TV channels. The set-top box recognizes files with music and photographs, but you cannot watch movies downloaded via torrent or from another portal using it.

The warranty is valid for one year. And for additional elements the warranty period is 6 months.