How to swap buttons on the keyboard. Tired of the standard key layout

Tip 1: How to change the function of a key

The default functions of individual keys and their combinations in Windows do not always suit users. In Microsoft OS it is possible to change function some keys by making changes to the registry, but these capabilities are very limited. Those who want to radically change the functionality of their keyboard, adjusting its operation in an optimal way for themselves, need to resort to third-party programs.

You will need– computer with installed Windows;– Internet access.

Instructions

1. One of the best free applications To reprogram the keyboard is Mkey. Go to the website http://www.seriosoft.org, download the program to your computer and install it. When installed, Mkey changes the keyboard drivers to its own and completely controls the operation of the keyboard.

2. If you want to change function some key, open the program window and enter the “Keys” menu. Right-click in the left area of ​​the window and select the “Add” option. After the dialog box appears, press the key function which you want to change, and enter any name of this key into the form. After confirming your decision by clicking the “Ok” button, select in the central area of ​​the window one of the actions that you want to assign to this key. Confirm your choice by clicking the "Save" icon in the lower right corner. From now on, the selected key will perform the function assigned to it. function.

3. For those who want to radically change how they work with the keyboard, we can recommend the following option. Buy a multimedia keyboard with a set of buttons that control the player. Select keys on your keyboard that you don't use. regular work. These could be keys digital block(on the right side of the keyboard), part of the function buttons (F1, F2, etc.), keys Scroll Lock, Pause Break and others. Together with multimedia keys, the number of keys that can be reprogrammed without any damage to operation can reach several dozen.

4. Use the Mkey program to assign special functions to these keys. This can be the launch of the programs you most use and a variety of actions (cut, copy, update, paste, navigate through tabs, connect to the Internet, etc.). Unlike system combinations keys, they will be controlled by one button press, which is much more convenient and faster than doing the same thing by pressing two or three buttons at the same time.

5. In order to quickly remember the new functions of the keys, stick the corresponding icons on them using tape or key stickers. As a result of these transformations, your keyboard will gain exclusive functionality that optimally matches your needs. The speed and ease of use of the keyboard will increase significantly.

Tip 2: How to change keys

In laptops, for various reasons, one or more keys on the keyboard may fail. Since replacing the entire keyboard is quite expensive, you can change the assignment of the keys and transfer their functions to less used ones keys, for example, on the second Ctrl, Alt or Win.

You will need Programs KEY TWEAK, MKey, Keyboard Layout Manager

Instructions

1. Download programs from the Internet and launch one of them.

3. Press the non-working key. If we are talking about transferring a function from working keys, for example, keys Fn for left-handers to the right side that is familiar to them, the program will notify the user that the key is working.

4. Set a new key for the selected function using the mouse and virtual keyboard. Confirm your choice by clicking on it and mechanical keyboard. The program will provide information about the functions performed by this key, and will also tell you whether there is duplication.

5. Close the program for replacing the functional purpose of the keys and check the functionality of the keyboard. To do this we open text editor, for example Notepad, and one by one type all the characters using all the keys. We also check the functionality of the keys in the most frequently used programs. This should be done after restarting the computer.

Please note

Some keys have only 1 value, for example, Num Lock or Insert, so you cannot assign other functions to them. This is hardware firmware that cannot be changed by key replacement programs. In addition, changing the firmware may cause a malfunction and the keyboard will stop responding to entered commands. Without contacting service center It is unlikely that this problem will be solved.

Useful advice

Different laptop manufacturers may have different options for reading scan codes from the keyboard, so you may need not one, but several programs to replace the functional purpose of the keys on the keyboard.

Video on the topic

Please note

The Mkey cannot be reprogrammed only Shift keys, Ctrl, Alt and Win.

Useful advice

In addition to Mkey, there are other programs for changing the functions of keys - for example, KeyRemapper, KeyTweak, Hot.Keyboard. However, some of them are paid, without surpassing the functionality of Mkey, others are inferior to it in their capabilities.

The computer keyboard is one of the peripheral devices that suffers the most from user inaccuracy. Remember, for example, the now classic situation with spilled coffee or knocked out “gamer” keys. And, nevertheless, there is still a way out - you can programmatically reassign non-working keys.

MapKeyboard program

The problems described above can be easily dealt with by a small utility called MapKeyboard, designed for remapping system keys and mouse buttons. The program is free, does not require installation, and it will not hang in the background - all changes are made in the registry once.

If you need to make subsequent changes to the keyboard layout, you simply need to run the program again.

Working with the utility

Download the application, unpack it to disk and run it as administrator. The main window opens.

Before starting work, let’s decide which keys we will reassign the non-working keys to. They are chosen so that absence does not cause significant discomfort. Donate without prejudice:

• Pause (Break);
• Scroll Lock;
• Insert;
• Home;
• Page Up/Page Down.

Having decided, we proceed directly to the replacement process. First, in the MapKeyboard window, click the key planned to act as a replacement, let it be Scroll Lock.

In the drop-down list field “Remap selected key to:” we find the key that we want to replace, for example “z”.

Once selected, the reassigned key is highlighted in green. Click “Save layout” to save the changes. If you need to return the keyboard to initial state, just click “Reset keyboard layout”.

Most regular PS/2 keyboards that connect to desktop terminals or laptops come with standard settings. Even if the equipment breaks down, you can afford to buy new keyboard, because it costs a penny. With laptops the situation is somewhat more complicated. Replacing a keyboard is not a cheap pleasure. That’s why, instead of buying it, you have to solve the problem of how Windows 7 or another system works if some buttons don’t work. There are several ways to do this. But not all of them are very simple. At the very least, you can get confused in the native tools of Windows systems. But to complete the solution, we will consider all the methods.

Why do you need to reassign keys?

Let's start with laptops. The biggest problem is that different manufacturers add additional keys to keyboards or set standard buttons to execute different commands and launch processes.

And the difference is especially noticeable when using Windows OS on computers. Apple devices. But also in themselves Windows systems Some buttons and keys have not been used by many users for a long time (for example, the same CapsLock button, which many people accidentally press when typing). It is in such situations that we have to solve the problem of how to reassign Windows 7 on a laptop or desktop terminal, or disable some buttons completely. It goes without saying that the proposed solutions can be applied when broken keys, and some even specially “sharpen” their keyboards for more comfortable control of processes in modern computer games.

How to remap keys on a Windows 7 keyboard without third-party programs?

First of all, let's look at the methodology proposed by the Windows system developer himself. To do this, you need to download a small applet designed to control the keyboard and pointing device (mouse) on the Microsoft website.

How to reassign keys to Windows keyboard 7 using this application? Nothing could be easier! After starting the program, you need to select your device in the list and use the basic parameters. A list of current settings appears. To change the assignment of a command to a specific key, use the All Commands view. Having selected the button and the desired command, you just need to save the current setting. If a button needs to be disabled, the button/key disable option is used.

How to reassign keys on the Windows 7 keyboard: registry

You don't have to use the above applet. By and large, the question of how to reassign 7 can also be solved through the registry. But some difficulties may arise here, since for each key you need to know its scan code in hexadecimal.

So, first, use the regedit command to call up the registry editor (necessarily with administrator rights), after which you navigate through the HKLM branch through the SYSTEM and CurrentControlSet directories to the Keyboard Layout directory. To replace one code with another, here you need to use the RMB menu in the right window to create a new line parameter, specifying the name Scancode Map for it, then enter the editing window, and in the window first enter the scan code of the key whose function will be performed after reassignment, then enter the new key code.

For example, to reassign space to right Alt, the combination looks like this: 0E 00 38 E0. To disable a key (let's take CapsLock as an example), the combination must begin with four zeros and will look like 00 00 3A 00. As is already clear, the process is quite labor-intensive, since you need to know not only the codes and the order in which they are entered. Reassignment can only be done once at a time, so you will have to create many new string parameters.

MapKeyboard app

In order not to deal with such complex procedures and solve the issue of how to reassign keys on the Windows 7 keyboard more in a simple way, it is better to use some utilities designed for this. One of these is small program MapKeyboard.

After launching the application it will appear virtual keyboard. First of all, you need to select a button or key whose function or symbol will be reassigned, then select a new key from the scrolling list to the right, called up by the Remap selected key line, and then click the Save layout confirmation button. This will be followed by a notification about the reassignment, and the changes will be activated only after full restart computer.

SharpKeys program

One more simple program- SharpKeys. Alas, when deciding how to reassign keys on the Windows 7 keyboard, the Fn button in particular cannot be used. It is better to use other solutions (the program does not recognize this key, and when changing Cyrillic characters, you need to use similar keys in the Latin layout).

Here the question of how to reassign keys on the Windows 7 keyboard can be solved just as simply. First, the Add button is used, after which the “reassignable” button is selected, and in the list on the right - a new action or symbol (for complete shutdown most used top line Turn Key Off). Upon completion of the actions, click the Write To Registry button (saving the parameters in system registry), and a reboot follows.

Applet MKey

Finally, another very interesting utility called MKey or Media Key. After installation, it will be located in the system tray.

IN running program the add button is pressed, then the key that needs to be reassigned is marked, after that the press emulation line is marked, and from the list below is selected new button. Now all you have to do is click on the button with the image of a floppy disk at the very bottom to save the changes.

By the way, it is this program that allows you not only to reassign individual buttons. With its help, you can create your own “hot” combinations, including combinations with and also configure any manipulators, gamepads and other similar equipment.

Instead of an afterword

It remains to be seen main question: what exactly should you prefer to set such settings? I think most users will agree that using the registry editor is quite a hassle. And of the programs reviewed, it is perhaps best to choose MKey, since the application has greater capabilities compared to the first two applets and is completely Russified. By the way, please note that before using any of the presented methods, it is recommended to first create a restore point for an emergency. But in any program, even after reassignment, you can set the default standard parameters by full reset settings.

And, of course, only the most popular methods and programs were considered here, since today you can find quite a lot of similar applications on the computer software market. But they all work on similar principles, and the interface is not particularly different.

Instructions

Therefore, there is an easy way to change the key value to any standard keyboard. To do this, you need to go through the “Start” button into the control panel and select the “Keyboard” tab there.

A window will open in front of you where you must select the “Key Settings” tab. In the window that opens, you can view those in the list keys, reconfiguration of which is available without special program. Select a key from the list and click “Configure”. Next, follow the computer prompts. However, it is worth remembering all the changes keys, since in the future you can simply get confused. First, write them down on a piece of paper.

To change meaning other keys not listed, you need to run the InetliType Pro program. If you do not have this program, you can download it from the official Microsoft website www.microsoft.com. In the “Key Settings” tab that opens, check whether the keyboard model is specified correctly. Produce this operation necessary because meaning which can be changed depends on the keyboard model.

If your model is not listed there, then open the “Change” tab. Find in the list the right keyboard and click on “Ok”. Look at the name of the keyboard on the front or back. Usually the name is located on the front side of the keyboard at the very bottom.

Then open the "Reassign Key" dialog box, select a new one that is convenient for you meaning keys. Use the “Ok” button to confirm the selected command. Now meaning keys changed. But the change in meaning keys maybe not always. It depends operating system which is installed on your . For example, Windows Vista does not provide such opportunities, so you should pay special attention to this factor.

Please note

Keyboard button meanings. The keyboard with which we type text has quite a lot of buttons. Each of these buttons is needed for something. In this lesson we will look at the keyboard buttons and remember those that are useful to us for working with text. Keyboard keys. Esc key. Its full name is Escape (pronounced "Escape") and it means "Exit". With this button we can close some programs.

Useful advice

But knowing the meaning of each button is completely unnecessary - most people have been using computers for decades and have no idea about any of these buttons. And you can also ignore them. On many keyboards, the numbers are also on the right side. They are laid out just like on a calculator and are more convenient for many people. It happens that these numbers don't work. You press the key with the desired number, but it does not print.

Sources:

• how to change the value in

Name site or domain name is its address on the network. Changing it may cause your site to fall out of search engines and, as a result, the loss of almost all traffic. Let's look at several techniques on how to change the name of a site without affecting its traffic.

You will need

• computer, internet access

Instructions

Video on the topic

Sources:

• how to change the meaning of keys

Modern keyboards are equipped with a number of additional keys, starting from the sleep button, ending with calling the browser. However, it happens that their location or purpose is inconvenient and interferes with work. Then it’s worth reassigning their functionality or completely disabling some keys.

Instructions

You can turn off the power buttons by opening Control Panel and then finding the Power Options icon. The settings window will open. In it, click on the link “Action of the power buttons”. There will be two items in the new window. In the lower “When the sleep button is pressed” set “No action required”, in the upper “When the power button is pressed” find the option that you need. You can cancel any action in a similar way.

If your laptop has an extra functionality Fn key, this gives you the ability to adjust the picture and volume, turn Bluetooth on or off, touchpad. The range of features depends on the model manufacturer. There are several ways to disable Fn. You can press the Fn + Num Lock key combination. On many laptops, this command is defined to disable Fn. On Toshiba laptops can be applied HDD utility Protector. Launch this application, select the line " Accessibility" in the "Optimization" tab, then you need to uncheck the box next to the line "Use the Fn key." IN BIOS key Fn is disabled in the Active Key Mode parameter; it must be set to Disabled. Save your settings before exiting the BIOS.

If the keyboard was provided with a proprietary software, install it to adjust and reassign the functions of the media keys. If the software was not included, you can use keyboard managers such as MKey (Media Key), Wire Keys, Keyboard Maniac (KeyMan), etc. You can find it on torrent sites free versions these programs. The interface in these applications is very simple and intuitive; its meaning boils down to the fact that in the “Keys” tabs you set the value you need or remove it completely. The programs are configured for both multimedia and ordinary keyboards.

Video on the topic

Sources:

• Media Key official website in 2019
• how to remap multimedia keyboard keys in 2019

When creating a new connection, you may find that the port already occupied by another application. To eliminate conflicts, you should change port (digital code) to a different value.

You will need

• Regedt32 program, built-in Windows calculator.

Instructions

Launch the Regedt32 program. To do this, activate the “Start” button, then “Run” and enter the command Regedt32.

In the registry editor that opens, find the HKEY_LOCAL_MACHINE folder, then the SYSTEM folder, select the CurrentControlSet subsection, activate Control in it, then the Terminal Server folder. Select the required one in the WinStations folder in the RDP-Tcp subfolder. Only here you can port.

On the right side of the menu we look for PortNumber. Click on it and select “Edit”. In the “Change DWORD” window that opens, we see set value d3d and hexadecimal system calculus of this code.

Video on the topic

Useful advice

Care should be taken when switching calculus modes to replace a port. Since words like Hex, Dec, Oct, and Bin are not commonly used in everyday life, users may not know what these switches do in the calculator.

Sources:

• Description of how to change the port on various operating systems

One can imagine at least 2 cases where a MAC change is required. addresses. Either you need to access the network from two different home PCs, or your computer has two OSes and two network cards, each of which is supported by only one OS.

Instructions

Open the Start menu. Select "Control Panel".

Double-click the left mouse button on the computer icon. Make sure that the shortcut is named “System”, this will take you to the control panel for the settings of the operating system and hardware installed on your . A window named “System Properties” will open.

Go to the “Hardware” tab and click on the “Device Manager” button, as a result of which a list of all physical and system devices.

Go to the “Network cards” item and expand the drop-down list by clicking on the “plus sign” next to the item name. In the list that appears, select the network card for which you need to change the MAC addresses.

Right-click on the required network card in the list, thereby calling up the context menu. In this menu, select “Properties”.

Go to the "Advanced" tab in the "Properties" window that opens<название вашего сетевого адаптера>" You will notice a list in which you should select “Network Address”.

Check the box opposite empty field for input - this way you activate the ability to write your own MAC value addresses.

Enter the required network value addresses taking into account that it must be written in the same way as the base value was initially set - i.e. no hyphens or spaces.

Click the "Ok" button after you have completed entering the data. All other windows can then be closed - the new network value addresses already assigned to your card and you don’t even need to restart your computer.

To check the result of your actions, press the Win+R key combination and in the window that appears, enter the command “cmd” (without quotes). Press Enter. In the new window that appears, type the command “ipconfig /all” and also press the Enter button, after which you will see a list of network settings of your computer. Find in this list the name of your network card and pay attention to the value of the “Physical Address” item. This is your MAC address, which you recently changed.

Video on the topic

Please note

Instructions: how to change the MAC address of a network card in Windows. In the list of devices that appears, expand “ Network adapters»> find the required network card> right-click> properties; Go to the “Advanced” tab > click on “Network Address” > change the switch to the “Value” position and enter a new MAC address

Useful advice

Wrote yours on a cheat sheet mac address– 00-07-E9-D5-32-3E. Why change the poppy address. The situation is quite realistic: the network card has failed and you have purchased new map, or even bigger changes - they changed the computer. And, the mac-address of the previous network card is registered with the provider. How to change mac address. Most affordable way, this change is through network settings Windows. Start/Settings/Network Connections/Network Connection.

Sources:

• how to change computer address in 2019

Text input from the keyboard can be carried out on several languages. By default there are two of them: English (US) and Russian, or Latin and Cyrillic. Language switching occurs at the user's command or automatically (if additional utilities are installed). Change language font It's not difficult at all.

Instructions

To change language font, press combination Alt keys and Shift or Ctrl and Shift. The icon on the taskbar will change its appearance. Depending on the settings and installed utilities, it can be in the form of an American or Russian flag, or in the form of the inscriptions RU and EN.

Click on in the taskbar with the left mouse button, select from the drop-down menu desired language font by clicking on the corresponding line with the left mouse button. This is another way to switch language font. For more detailed settings open the language bar.

To open the Language Bar dialog box, open Control Panel from the Start menu, select the Date, Time, Language, and Regional Options section and click on the Regional and Language Options icon. Go to the "Languages" tab.

Click the “Details” button - it will open additional window"Language and text input services." To set the language font which will be used by default when loading the operating system, use the drop-down list in the “Default input language” section. Once selected, click the “Apply” button.

To set the languages ​​that will be displayed in the language bar, in the Installed Services section, use the Add or Remove buttons. When you use the Add button, a new dialog box will open. Using the drop-down list, select an additional text input language; the value in the second field will change automatically. If this does not happen, set the value in the "Keyboard Layout or Input Method (IME)" field yourself. Confirm your choice.

On the same “Options” tab, click the “Keyboard Options” button - in the window that opens, you can change the keyboard shortcut setting for text input languages. To do this, click the “Change keyboard shortcut” button and mark the required fields with a marker. Confirm changes made OK button.

Customize how the language bar appears on the taskbar by clicking the " Language bar" Click OK in the Language Bar settings window to confirm your changes. In the Regional and Language Options window, click Apply and close the window. If it is not displayed on the taskbar, right-click on the taskbar and place a marker in the “Language bar” line in the “Toolbars” section.

Sources:

• how to change key language in 2019

A screen saver is a static or animated image that appears through certain time computer downtime screen monitor. If you are tired of your current screensaver, you can change it. Moreover, just a few mouse clicks will be enough to do this.

Instructions

Open the "Properties: Screen" window. To do this, go to the “Start” menu and select “Control Panel”. Next, in the “Appearance and Themes” section, select “Select a screen saver” or click on the “Screen” icon. Eat alternative option– right-click on any point on the desktop that is free from shortcuts and select “Properties” from the drop-down menu.

In the window that opens, go to the “Screensaver” tab. You will see the current screensaver in miniature at the top of the window. Click on the “Splash Screen” section and select the desired line. Now you can left-click on the image to see how the new screensaver will look in full screen mode. If you want to disable screensaver, you can select “No” in the same list. Then a black screen will be displayed instead.

After looking at the new screensaver, move your mouse slightly to exit the preview mode. In the “Interval” field, using the “Up” and “Down” keys or by entering a numerical value directly in the field provided for this, you can change the number of minutes of PC idle time after which screen saver. To save the changes, click on the “Accept” button and close the window by clicking on the “Ok” button or on the icon with a cross in the window header.

However, a screensaver is not just a picture. It can also serve to protect your PC. How does this happen? And here it is: the computer is inactive for a specified number of minutes, after which the screen saver turns on. If the data protection mode is enabled, then when you exit the standby mode, after turning off the screen saver, a window appears for entering the user password. It will be impossible to log in to the system without a password.

To set the data protection mode, in the “Properties: Screen” window, on the “Screensaver” tab, check the box next to “Password protection”. Then close the window, before saving the changes by clicking the “Accept” button. It is worth noting that if your account user's account is not password protected, enabling data protection mode will not give you anything.

Please note

Screensavers and screen savers, collection cool programs, desktop wallpaper, humor, Windows settings and much more... Simply beautiful iridescent abstractions. Interesting color transitions and wide screensaver settings. I recommend downloading the screensavers and watching...

Useful advice

Screen savers, screensavers, screensavers for Windows. Screen savers not only extend the life of your monitor, but are also pleasing to the eye when you don't use it for a long time. Windows has built-in screensavers or screensavers, such as: Geometric Waltz, voluminous text and even watches, but we are ready to offer something more and completely free.

Program for reassigning keyboard keys, mouse buttons and scroll wheel Key Remapper allows:

Reassign keyboard keys,clicking mouse buttons and scrolling the mouse wheel new values ​​with the ability to set keys and mouse buttons that are not present on the keyboard. For example, the CapsLock key can be replaced with "Middle Mouse Button", F11 with "Mouse Wheel Scroll Down", F12 with Win, Browser Home or "Mouse Button X2" (which may not be physically present on input devices).

Reverse replacement of keys and mouse buttons, i.e. virtually change their functional purpose. For example, you can virtually swap right Shift and Enter, “Middle Mouse Button” and left Shift.

Replace specific keys or mouse buttons combinations of keys or mouse buttons with modifiers. For example, you can set the combination Alt+Shift+Esc ( fast switching programs), set the combination Ctrl+C (copy) to the mouse button X1, set the combination Ctrl+”Left mouse button” to the right Alt.

Emulate double click of mouse buttons or double tap keyboard keys with the ability to set a delay between clicks (double click with delay).

Lock (disable) keyboard keys, mouse buttons, mouse wheel scrolling and their combinations with modifier keys.

Limit action of reassignments and blockings certain programs and windows. For example, you can specify that the replacement of the X1 mouse button with the Space key is carried out only in program "A" and nowhere else. Or, so that the NumLock key is replaced by the combination Ctrl+C+C (double press C) everywhere except for a program whose window title contains the word “B”.

Create and quickly(in two mouse clicks) switch keyset profiles.

In this case, the program does not make any changes to scan codes in the system registry and does not require a computer restart for the key changes to take effect.

By using Key Remapper possible to reassign almost any keys and mouse buttons.

Screenshots

How to use the program

Downloading and installing the Key Remapper program

To work with the program, you need to download the installation distribution and then run it. The installation will begin, after which the program will be ready for use. After starting the program, the window shown in the figure will appear on the screen:

Working with the program

At the top of the screen there is a drop-down list for selecting a profile and buttons for working with them. Nearby there is a "Pause" button, which allows you to temporarily disable the program. Below is the main area where key replacements and key locks are defined.

Profiles

For certain programs and purposes, different sets of keys are required, so the program provides profiles with which you can create sets of different replacements and key mappings that can be customized and quickly switched as needed. They can be created (the "Add new" button), renamed (the "Rename" button) and deleted (the "Delete" button).

When creating a profile, a window appears in which you must enter a profile name and select whether new profile filled with current data or not.

You can switch created profiles using a drop-down list or through a context menu called by right-clicking on the program icon in the taskbar.

Definition, replacement and blocking

To replace one key with another, you need to determine the key or mouse button that will be physically pressed and the key that will be reported to the system as pressed:

To determine the replacement of a key, mouse button, or scroll wheel, perform double click mouse on the line "(double click to add)". This operation can also be performed using the Insert key or using the context menu:

The window shown in the figure will appear:

When this window appears, the focus automatically switches to identifying the key/mouse button being pressed.

Press the required key, mouse button (to determine the left mouse button - hold down the Ctrl key or any other modifier) ​​or scroll the mouse wheel and select what you want to do: replace with another key or combination or block?

If you need to define a new key value, place the cursor in the input field under the "Replace with a key, mouse button or combination" checkbox and press the required key or combination on the keyboard (hold down the Alt, Ctrl, Shift and/or Win modifier keys and press the main key). If there are no corresponding keys on the keyboard, you can determine them by selecting the primary key from the list. If you need to specify modifier keys, check the boxes next to their names. If you need to click the mouse button or turn the mouse wheel, click them or select the action starting with "Mouse..." from the drop-down list. For example: “Mouse - press the right button”, “Mouse - turn the wheel up”, etc.

If you want to block a key, select the "Block" checkbox. If the "Full blocking" checkbox is not checked, then a simple key press will be blocked, but when modifiers are pressed (Ctrl, Shift, etc.), the key will not be blocked. If the checkbox is checked, a complete blocking will occur. For example, if you block the "A" key and do not check the "Full blocking" checkbox, then the Ctrl+A combination will work. But if you enable full blocking, it won’t happen.

When the definition is complete, click "OK".

If the program is not in Pause mode, then the replacement will already work.

If you want to virtually change the keys and/or mouse buttons, then you need to make two key changes - one to the other and vice versa.

It is important to note that you cannot put two or more replace or block actions on one key. If this happens, then the one that is higher in the list is executed. If one action is located in a folder, and another on the same key is located below it, then the action from the folder will be executed.

Working with substitutions and blocking

The program allows you to structure replacements and locks in folders, which can be created using the Ctrl+Insert key combination or through the context menu - "Insert folder".

You can freely move activities and folders simply by dragging your mouse. If you press at the beginning of dragging Ctrl key, then the action or folder is copied. The usual cut, copy, paste and delete functions are also provided.

If you need to temporarily disable any override or lock, or even an entire folder, you can use the Spacebar or context menu- "Disable...". To turn it on, you must repeat the operation.

Program hot keys