• Mms message not loaded. Setting up MMS on an Android device

    MMS – instant messaging service multimedia messages, allowing service users mobile communications use the ability to send texts, photos, video and audio recordings to other subscribers. Maximum size files available for sending is 500 kilobytes, and the number of text characters should not exceed 1000 characters. You can send multimedia messages not only to telephone number, but also to the address email. You can send MMS both within the territory of Russia and abroad. The cost of sending one message depends on the tariff and averages 7.95 rubles.

    Sending MMS from Beeline via the Internet has recently been blocked, so in order to be able to communicate with subscribers via multimedia messages, you need to connect and configure this service on your mobile phone.

    How to connect MMS to Beeline?

    Check if it is connected MMS service or not, you can contact Beeline support service at 8-800-700-0611, or by visiting home page your personal account where a list of connected options is displayed. If the option is disabled, you can activate it in one of several available ways:

    • Dial and send the command *110*181# call from your phone. It includes a package of three services, which includes support for sending and receiving MMS messages.
    • Go to yours, open the “Available” list in the “Services” menu, and then select the MMS connection. In the same way, you can activate the service via mobile application from Beeline for Android and other mobile platforms.
    • Contact an employee at one of the Beeline offices with a request to connect MMS - they will help you completely free of charge.

    Automatic MMS setup

    After MMS connections You must configure the option correctly to be able to read and send multimedia messages. To do this, follow these steps:

    1. Follow the link: MMS settings to get to the menu for automatically receiving MMS settings for your phone model.
    2. Select your phone model in the drop-down list, or enter its name yourself.
    3. Click on the “MMS” button, then select “Yes, proceed to MMS settings.”
    4. If possible automatic settings, enter the phone number in the window and click the “Submit Settings” button. If only manual MMS setup is available, carefully read the instructions provided for your phone model and strictly follow its instructions (for various phones steps may vary).

    Received in automatic mode The MMC configuration files must be applied, and then the phone must be rebooted. In addition to the above method, you can get automatic settings for your phone for free by calling 060432.

    After the reboot, the MMS service should be activated and become available for use.

    Manual MMS setup

    If for any reason you cannot access the site and find out manual settings for your phone, create an MMS profile in the phone settings menu with the following data:

    Save the profile with the above MMS parameters and reboot the phone. After this, you will be able to send and receive multimedia messages.

    The MMS function is supported by many modern models phones. The ability to send multimedia messages allows users mobile phones share with each other impressions of a vacation, a walk, wish a great mood along with a beautiful melody or interesting picture. This function is now actively used by those subscribers who own older models. cell phones. Multimedia messages are also convenient when it is not possible to use more in modern ways information transfer - Wi-Fi and WhatsApp.

    The question of how to set up MMS is asked by subscribers of all existing operators. The system for setting up the function of sending multimedia messages is approximately the same for all operators. To be sure that the feature will be available and you can use it, you must complete all possible settings, which include the following three steps:

    • Step 1 - you need to activate the service;
    • Step 2 - configure account;
    • Step 3 - Check your phone settings manually.

    Let's look at the features of connecting to the service and setting up an account within each mobile network. Step 3, which includes setting up the device manually, will be considered separately - it does not depend on the operator.

    Setting up MMS on Tele2

    The question of how to set up MMS on Tele2 will be resolved after you select any of the methods listed below:

    After completing the necessary steps, the service will be connected and account settings will be activated.

    Setting up MMS on MTS

    MTS users can also set up MMS automatically. In order to connect to the service and activate the necessary settings, you need to choose the method that is most suitable and convenient for you:

    1. Make a call to number 0876.
    2. Send free message with the text “MMS” to number 1234.
    3. Dial command *111*18#.
    4. Use an assistant.

    The settings received in the SMS message must be saved on your device.

    Setting up MMS on Beeline

    The question of how to set up MMS on a phone whose operator is BeeLine can be solved in very simple and quick ways: The 1st method is to connect to a service called “Pack of three services”, which includes WAP/GPRS/MMS. You can do this by dialing *110*181# and the call key on your phone. This way you will connect the service and activate your account settings. 2nd method - activate the service in your personal account.

    Setting up MMS on Megafon

    Megafon has provided subscribers with ample opportunities to manage their phone settings.

    Therefore, the question of how to set up MMS on a phone with a Megafon SIM card is not a problem. Choose the method that is most convenient for you:

    • Send an SMS with the number 3 to number 5049.
    • Use the self-government service *105#, where then send request 6 (Settings) - then 1 (Phone settings) - and 1 (MMS).
    • Order settings on the company website.

    Setting up your phone manually

    This step must be completed in order to no longer hesitate and be confident that multimedia messages will be sent from your phone without unnecessary snags. It consists of several actions:

    1. In the phone menu, find the “Settings” tab (“Options”), then “Configuration”.
    2. Check the MMS message configuration settings:
    • access point in Tele2 - mms.tele2.ru, in MTS - mms.mts.ru, in Beeline - mms.beeline.ru, in Megafon - mms;
    • username in MTS and Beeline is the name of the company in small in Latin letters, in Tele2 - absent, in Megafon - mms;
    • the password in MTS and Beeline is the same as in the username, in Tele2 it is missing, in Megafon it is mms;
    • authentication type - select “normal”.

    Next steps:

    1. Enable the new account as the default account.
    2. Reboot your device.
    3. To register your number on the network as an MMS user, you need to send a multimedia message to your phone after turning on the phone

    Setting up MMS on iPhone

    The question of how to set up MMS on iPhone can be resolved by performing several manual steps.

    1. Order a service:

    • MegaFon operator - send an SMS with the text “gprs” to number 000890;
    • Beeline operator - call 067409181;
    • MTS operator - send an SMS with the text “GPRS ON” to the short number 0016;
    • Tele2 operator - make a call to toll free number 693.

    2. Connect the device to a PC that has Internet access and is running iTunes app. Agree to the “Download updated settings” proposal. If there is no offer, it means that the service is configured or is not supported by the operator.

    3. In the phone menu, open the “Settings” tab, then go to “General”, select “Network”, go to the “Cellular Network” menu.

    1. Enter the required values:
    • Access point (APN): MTS operator - mms.mts.ru, Beeline - mms.beeline.ru, Tele2 - mms.tele2.ru, Megafon - mms.
    • The username in Beeline and MTS is the company name in small Latin letters; in Megafon and Tele2 it is not available.
    • Password - similar to username.
    • MMSC: operator Tele2 - http://mmsc:tele2.ru, Beeline, MTS, Megafon.
    • MMS proxy: Beeline operator - 192.168.94.23:8080, Megafon - 10.10.10.10:8080, MTS - 192.168.192.192:8080, Tele2 - 193.12.40.65:8080.
    • The maximum size is 512000.

    The MMS setup on your device is now complete. Enjoy the service!

    If the phone is configured incorrectly, this becomes the reason why MMS is not sent from Android to Tele2. When sending, the recipient must have a device that can receive such messages, otherwise it is not the file that is delivered, but a link to it, with an access code to the attachment. After clicking on it via a PC, the client finds himself in a gallery where he can view the contents of the MMS.

    Prerequisites

    To be able to send, taking into account all the conditions:

    Knowing the basic conditions, it is necessary to accurately understand the reasons why images in a message are not sent, and the principles for solving them.

    Reasons and what to do?

    Question: I received a message containing text of the form “received image in MMS format”, and below is a regular link. After clicking on it, the picture does not appear, what should I do?

    Answer: The link indicates that the settings in the gadget are not configured. To solve the problem, you need to order automatic settings from the operator or specify them yourself. After solving the problem, you need to send a picture to any number and all new incoming MMS will begin to be displayed immediately on the gadget.

    Question: It doesn’t work on , I can’t send either a picture or a video to other numbers, but all the parameters are set correctly, what could be the reasons?

    Answer: You need to set the parameters in manual mode, if there is no effect, then you need to call support.

    Question: When I set the necessary parameters and change the value in the MNC 20 column, all other settings are deleted, what is this?

    Answer: The problem can be solved by automatic installation parameters, to order you need to call 679.

    Question: I received a photo in a message, but it opens through a link. I enter the gallery normally, the photo is visible, but after saving I can’t find the image on the device, where should I look for it?

    Answer: It depends mobile device, but often images are saved to the gallery or to the downloads folder.

    Question: What do you need to do to set up MMS on Android yourself?

    Answer: You should specify the data in the home page, access point, type, and also specify the proxy. Additionally, the MCC line indicates dialing 250 and MNC with code 20. Other columns remain empty.


    Question: What to do if automatic parameters are not set or they do not arrive from the server to the device?

    Answer: You need to specify the data yourself by clicking on the tab with the connection, in open menu indicate the following:

    1. Any information can be entered for the profile name.
    2. For home page the path mmsc.tele2.ru is indicated.
    3. Proxy needs to be enabled.
    4. For the line with the IP address, the set 193.12.40.65 is inserted.
    5. The port is filled with 9201 for older phone models and 8080 for modern devices.
    6. Connection type – GPRS.
    7. Access point – mms.tele2.ru.

    The reasons are all very similar and each has a solution. After entering the correct information, multimedia messages will begin to be sent to the required addresses.

    For people who can't send MMS messages, you need to find out the reasons, check the settings and the correctness of their installation. After determining all the factors, you can quickly set the necessary parameters and send data when convenient.

    It's time to tell how to set up MMS on android smartphones.

    So, as always, the instructions are divided into simple and understandable steps. But before that, we need to explain to our reader why MMS doesn't work on his phone. The reasons, as always, are quite banal. However, if the instructions do not help, you will always understand the essence of the problem.

    When modern smartphones are first launched with a SIM card, they themselves determine the mobile Internet and MMS settings. However, this only happens with new SIM cards that already contain such information.

    In such a situation, the phone must create two points, taking them from the SIM card or receiving data via the GSM network:

    1. Internet access point
    2. Points MMS transmissions messages

    If your SIM card is many years old, there is a high probability that the phone will not be able to “identify itself” in the operator’s network. What to do then? This is exactly what we will tell you, because:

    Step 1. Go to the phone settings. We are interested in the item "More" V new Android ICS. Or "communication settings", as well as analogues of this phrase.

    Step 4. Click on the auxiliary menu and select "New access point". In the example shown, the MMS point has already been created, so don't look at it. In your case, the dot will most likely be missing. If it is present, but MMS is not sent, then delete existing point and create a new one.

    Step 5. Well, this is the list of parameters that we will need to enter for new point, and then save it. To find out parameters of your operator, see below.

    Cellular operator options for setting up MMS

    These parameters are indicated only for the Moscow and Moscow region. Note that in the case of Beeline and Megafon, indicated only different data. Therefore, Beeline and Megafon subscribers: first look at the MTS data, and only then the additions to your operator.

    MMS settings for MTS operator

    MMS settings for Beeline operator

    Name: BeeMMS

    MMSC http://mms/

    Proxy 192.168.094.023:8080

    APN mms.beeline.ru

    Username: beeline

    Password: beeline

    MMS settings for Megafon operator

    Name: Megafon MMS

    MMSC: http://mmsc:8002

    Proxy: 10.10.10.10:8080

    Username:empty

    Password: empty

    We hope that the instructions for setting up MMS helped you. If your OpSoS settings are not here, then try searching for them on the Internet, then use the instructions first and enter them in the required fields. Any problems or clarifications? - unsubscribe in the comments!

    At the current level information technology sending multimedia messages between subscribers, it would seem, has already outlived its popularity. However, in the absence of access to wireless internet, this method of information exchange becomes the only alternative. That is why it is important for any user to know what to do if the question arises: “I can’t send MMS from Android” and how to solve it.

    Problems with sending or receiving messages are not always associated with a technical malfunction of the phone. This possibility should not be completely excluded, but first it is better to perform a preliminary diagnosis and network settings. Please note that for a new SIM card, settings come automatically the first time you use it in a smartphone. If your SIM card has been working for many years, this function may be lost for it. It is also worth taking into account other possible causes of failures.

    Why doesn't this function work:

    1. This service is not available for some regions. To clarify the information, it is better to contact your representative directly. cellular communications.
    2. You also need to request automatic settings from the operator. For this it is important to inform exact model your phone. After receiving the data in separate message You should activate the service according to the attached prompts. If your smartphone allows for the use of two SIM cards, the setup is carried out separately for each number.
    3. Your recipient may have a different tariff plan, not supporting this function, or using other network parameters.

    Often automatic updates cannot be used or they do not work correctly. For such cases, it is advisable to configure the communication parameters yourself. Such an algorithm provides some differences for different operators.

    Solution to this problem

    If you cannot use the ability to automatically configure network parameters, you must enter everything yourself. To do this, it is important to adhere to the given algorithm of actions, focusing on your phone model and the selected connection.

    Steps for manually entering network parameters:

    • In the menu section of your smartphone you need to find “Settings”.
    • In this list find the category " Wireless networks" Communication parameters are indicated here, including data transfer and wireless Internet use.
    • It is necessary to activate the “data transfer” item if it is not active.
    • Return to the "Wireless Networks" menu and find the access point. Typically, the phone will give two connection options, one of which will be responsible for mobile internet, and the second - directly for the ability to send multimedia files.
    • For a phone with two SIM cards, you must also indicate the number to which the service will be connected.

    If impossible self-configuration You can contact your operator at the specified number or visit service center(representation) in person. For a communications center specialist, such procedures will take a minimum of time and present no difficulties.

    Not sent from Tele2

    If MMS messages are not sent from Android to Tele 2 subscribers, you need to check the correctness of the information provided. It is also worth asking your subscriber in advance about setting up a similar function on his device.

    How to set up message transmission:

    1. Call number “679” and act according to the instructions received.
    2. Register in " Personal account» on the resource, after which you will familiarize yourself with the settings section by activating the service.

    If the manipulations are ineffective, you should use manual entry. You will need to enter the specified information in the appropriate sections.

    Template to fill out:

    • You can come up with a name yourself.
    • APN - mms.teleru.
    • MMSC - http://mms.tele2.ru.
    • Proxy - 193.12.40.65.
    • Port - 8080 (9201).

    After entering the information, you need to restart the device and also check the function of sending and receiving messages.

    Difficulties in sending messages for MTS

    MTS subscribers use this service after activating the function in several ways.

    Execution algorithm:

    1. Send an empty SMS field to the short number “1234”. After this, the network parameters will also be sent via SMS notification.
    2. If you can access the Internet via a PC, it is better to create your account on the website of a company that provides such communication opportunities. This will let you know latest news and connection promotions, monitor your expenses or order a tariff change. You can also order service connection in the “Internet Assistant MTS” section. Address of the site of interest: https://ihelper.mts.ru/selfcare/.
    3. For direct communication and clarification of details of interest, you can also use the service feedback on the website, or you can call “0876” and receive verbal instructions for such cases.

    If it is not possible to use the options described above, it would be more advisable to enter the information yourself in the specified section.

    When entering manually, use:

    • APN - mms.mts.ru.
    • Login (username) - mts.
    • Password - mts.
    • MMSC - http://mmsc.
    • Proxy - 192.168.192.192.
    • Port - 8080 (9201).
    • Access point type (APN) - mms.

    After completing all sections, be sure to restart your smartphone to changes made preserved and updated. After that, check the sending function: send any multimedia file to the nearest device of a friend or relative. If it is impossible to perform or if a failure appears on the screen, repeat the specified steps or check that they were performed correctly.

    Can't send MMS from Megafon

    Megafon subscribers also have access to services for sending and receiving multimedia files. They are also used for this different ways connection, and in the appropriate sections of the menu indicate the information below.

    When entered manually, indicate:

    1. Name - come up with any suitable name.
    2. APN - mms.
    3. Login - leave blank.
    4. Password - leave blank.
    5. MMSC - http://mmsc:8002.
    6. Proxy - 10.10.10.
    7. Port - 8080.
    8. Access point type (APN) - mms.

    Register your account on the official website: http://moscow.megafon.ru/help/settings/. If it is preferable to receive information via SMS, you must send a message to the number “5049”, and interaction with the operator is carried out using direct number"05002".

    It is impossible to send or receive messages on the Beeline network

    No less popular operator Beeline also took care of opportunities for its customers. For this purpose, there is an official website with the possibility of personal registration and obtaining information of interest about new tariffs and services of the company. It is located at: https://uslugi.beeline.ru/. Manually entered parameters will also change slightly.

    When manually entering data, the following parameters are used:

    • Name - come up with any suitable name.
    • APN - mms.beeline.ru.
    • Login - beeline.
    • Password - beeline.
    • MMSC - http://mms/.
    • Proxy - 192.168.94.23.
    • Port - 8080.
    • Point type (APN) - mms.

    Communication with the operator is free of charge short number"060432". If none of the proposed options “works,” it is more advisable to contact the Beeline center in person.

    What to do if it says failure when sending MMS from Android

    Among possible reasons, why MMS is not sent from Android, we can also highlight some software glitches of the system. Despite the fact that using Android usually does not present such problems, you should know the possible algorithm of actions in such a case.

    Main causes of malfunctions and solutions:

    1. Virus infection of files. As a preventive measure, we can recommend pre-installation good protective program. If the problem has already appeared, you need to scan the system and remove the possible threat.
    2. Minor system failures may occur spontaneously or due to other problems. Simple ones can be eliminated by restarting the device or resetting the settings to factory settings. In case of serious problems, you may need to reflash your smartphone, which is best left to the service center specialists.
    3. Mechanical failures. Typically, this kind of problem arises when unauthorized changes are made to the specified network parameters. To fix similar mistakes It is enough to check the entered information.
    4. Installation special applications, limiting the amount of information transmitted. This is usually convenient for contract subscribers, or when using a child’s phone. At the same time, such software can block the transfer of any files, including.

    Typically, the listed smartphone malfunctions do not affect the data transfer function, but in some cases this may be the problem. If the phone is under warranty, the easiest way is to contact a service center. For relatively old devices, diagnostics or repairs can be performed. It should be noted that such problems are not critical, but may indicate more serious problems that negatively affect the operation of the gadget.

    Setting up MMS for all operators

    Before sending the selected file, you should make sure that its size does not exceed 500 KB (for subscribers of one network) and 350 KB (for sending to another operator). Usually modern gadgets automatically compress the file to required parameters, but it's better to check this in advance. In addition to the above problems, there may be exceptional situations, for example, when such an opportunity is not provided specifically for your region of residence. Messages in this case may be delayed or arrive in unreadable form.

    Also, before sending, you must make sure that the entered number is saved in international format(for the Russian Federation this is +7ххх ххх хххх). You should know that if the recipient's smartphone is turned off, your message is stored for no more than 72 hours, after which the subscriber will not be able to receive it again.

    An Android smartphone usually sends MMS after setting automatic data. If the instructions say that you will need to perform some manipulations, but this option is still not available, useful tips our articles will help you understand the reasons possible failures, and also determine the cause of the problem for subscribers of different operators.

    Read more: