Program for creating bootable usb windows 7. Five programs for creating bootable flash drive

I will show you 4 ways to help you make a bootable USB flash drive. This is usually needed to install Windows or for a program if it runs before the system boots.

There are many programs to solve this problem, but sometimes you can get by using the system. I will provide instructions that will help you make a bootable USB flash drive with any version of Windows or program. 4 methods, 2 universal and 2 for specific OS.

But before that you need to prepare. You will need:

1. Flash drive with a capacity of 4 GB or more.
2. Image ( iso) operating system or the program for which a bootable USB flash drive will be created.

Before creation bootable flash drive Be sure to format it to avoid errors.

Bootable USB flash drive in Windows OS

You can do without third party programs and do everything in Windows. To do this you will have to use a number of commands. I will demonstrate only the most necessary ones.

First clear your device of all files. To do this, go to the execution line ( Win+R) from the Start menu >> Run, and then enter the command diskpart as in the image below.

In the window that appears, enter list disk to see all devices for further work with them.

In my example, there were 2 devices:

1. 0 — hard drive.
2. 1 - flash drive.

Distinguish a flash drive from hard drives very simple in size. Select it with the command select disk 1.

Be careful, there may be another number instead of 1.

After this, you need to create a primary partition. To do this, enter create partition primary.

Select a section by entering select partition 1 and activate it with the command active.

Then set the letter to the carrier ( automatically) by entering assign and finish the job Exit.

Now be sure to download the files to the USB flash drive unpacked. If you just copy the iso file, nothing will work.

If you don’t understand something, you can watch a video on how to do it using a real example.

Bootable USB flash drive for Windows 7 USB/DVD Download Tool

Download and install the USB/DVD Download Tool. It is made specifically for working with Windows 7 files and is absolutely free. Most likely it won't work with others. Total 4 simple steps to create.

Please note that if you use an image not from the official Microsoft website, problems or errors may occur.

Provide the path to the iso file and proceed to the next step.

Then select " USB device"for a flash drive or "DVD" for a disk.

Select a flash drive and start copying. It must have at least 4 GB free space.

Then wait until it is written to the device and you will receive a ready-made bootable USB flash drive.

The instructions are also available in video format.

Bootable USB flash drive for all images in UltraIso

This paid program having free trial period. Download it from the official website and install. It is multifunctional and in Russian. Suitable for Windows XP, Vista, 7, 8 and 10.

You can see an example Windows installations XP in the video. With other versions of systems, everything is done similarly.

Once launched, select a trial period.

Then open the image in the program.

Now in the “Bootboot” tab, select the image entry as shown in the example below.

Settings are made here.

1. Disk drive- flash drive.
2. Image file— here check whether the path is specified correctly.
3. Recording method- be sure to use USB-HDD+. Otherwise, in some cases it will not work.

After checking all the settings, start recording.

Wait for it to finish. Time to finish is shown on the right.

Under no circumstances remove the flash drive until the process is completed.

If completed successfully, you will see a completion message. After this, the bootable USB flash drive will be ready. Just close the window and enjoy.

Additional method for Windows XP

Download free utility DirectGrub and unpack the archive. No installation required. Select the iso file, flash drive and click “Start” as in the image below.

Wait while the files are copied. After successful completion, a window will appear.

I hope you don’t have any questions and everything turned out well.

What did you use to create a bootable USB flash drive?

Introduction

Note: You will not be able to install Windows 7 with using Windows 7 USB/DVD Download Tool if the ISO file is saved on a USB disk or DVD.

A copy of an ISO file with Windows 7 created with via USB/DVD Download Tool is bootable. A bootable disk allows you to install Windows 7 without first running the existing operating system on your computer. If you change the boot order of the disks in BIOS your computer, you can run Windows 7 installation directly from a USB flash drive or DVD when you turn on your computer. Please refer to your computer's documentation for information on how to change the boot priority of drives through the BIOS.

Once you accept the Windows 7 license terms, you will only be allowed to make one copy of the ISO file onto a disk, USB flash drive, or other media as a backup for reinstallation on the licensed computer. If you don't delete the copy of the ISO file you made to install software on your computer then this copy The ISO file will be your backup.

Installation

Step 1. Click here to download the installer Windows file 7 USB/DVD Download Tool .

Step 2. When prompted to save the file to disk or run it, select Execute.

Step 3. Follow the installation instructions. You can determine where to install Windows tool 7 USB/DVD Download and whether to create shortcuts in the menu Start or on Desktop.

You must have administrator rights on the computer where you are installing Windows 7 USB / DVD Download Tool. This requires Microsoft NET Framework 2.0 or higher. If this tool is not on your computer, the program will install it for you. In this case, you may need to restart your computer to complete the installation.

System Requirements

• Windows XP SP2, Windows Vista or Windows 7 (32-bit or 64-bit);
• recommended Pentium 233 MHz or higher ( 300 MHz);
• 50 MB free disk space on the hard drive;
• DVD-R disc or removable USB-Flash no less 4GB.

Burning an ISO Image

To record ISO-file with Windows 7 you need:

Step 1. Click the button Start and select Windows 7 USB/DVD Download Tool from the list "All programs".

Figure 1. Windows 7 USB / DVD Download Tool - program window

Step 2. Enter the name and path of your original Windows 7 ISO file or click the button "Review" and select the file in the dialog box "Open".

Figure 2. Window for selecting a file with a Windows 7 image

Step 3. Select "USB device" to create a copy on a USB flash drive or "DVD" to create a copy on DVD disc and then click the button "Next".

Figure 3. USB or DVD recording selection window

Step 4. If you are writing a file to a USB flash drive, select the USB device from the drop-down list and click the button "Start copying".
If you are copying files to DVD, click the button "Begin" to start recording.

Figure 4. Selecting a USB flash drive

After your ISO- the file with Windows 7 will be recorded on the selected media, you can start installing Windows 7, to do this, go to the root directory of your DVD or USB flash drive and run Setup.exe.

Frequently Asked Questions

• What size USB Flash Drive is required?
  You need Flash Drive USB with a minimum of 4 GB of free disk space.
• Can I use my disk or flash drive with an ISO file on it to install Windows 7 on someone else's computer?
  No. The disk or flash drive with your burned ISO file is intended for installing Windows 7 only on own computer licensed user.
• Can I backup to CD-R?
  No. The Windows 7 ISO file is too large to fit on a regular CD.
• Can I use a Blu-ray DVD for backup?
  Yes, as long as your DVD drive can write to Blu-Ray DVD.
• If I have some files on USB Flash disk So, will Windows 7 USB/DVD Download Tool remove them?
  This program requires a completely empty USB Flash drive to copy files from Windows 7. This ensures that this device will be bootable after the copying is complete.
• Is it possible to do backup copy With using iPod, camera or other device with enough free disk space?
  Yes, but it's not recommended. The device must be formatted in order for the media on which recording will be made bootable. A USB Flash Drive specially dedicated for this purpose will be the best option.
• Can I use Windows 7 USB/DVD Download Tool to backup other files?
  This tool intended for recording only ISO files with Windows 7 from the Microsoft Store.

Troubleshooting

• my USB devices not on the list available devices.
  If you do not see your USB Flash drive in the list of available devices, make sure the drive is inserted into the USB port or click the Refresh button next to the list of available drives.
• I inserted a blank DVD-R disc into my DVD drive, but Windows 7 USB/DVD Download Tool cannot recognize it.
  If there are several DVD drives in the system, then select the first one that can burn DVD. If you have several DVD-R discs, try inserting a blank DVD-R into another DVD drive. If this does not help, please verify that your disc is not damaged and that your DVD-R disc is usable, or contact product support.

Hello friends! Today we’ll talk again about creating a bootable USB flash drive.

How to create a bootable USB device? For what purposes should I use it and what program should I use to record it?

A brief overview of the five most popular and free programs to create a bootable USB flash drive.

Modern developments do not stand still, and yesterday's technologies are slowly but surely losing their relevance. So the once popular CDs and DVDs no longer seem like such a clear solution for storing, transferring and working with information. High speed of data reading, versatility and the possibility of reusable use are only a small part of all the advantages of a flash drive in quality bootable media in front of the disks. Today almost everything personal computers and laptops, if they are less than ten years old, support the ability to boot from USB devices. And in some cases (for example, a netbook), a flash drive may be the only boot device from an external drive.

By the way, the new Windows 10 operating system will be the first axis, the distribution of which will be officially distributed on a USB drive. And if you suddenly need to recover files from a flash drive, read about it. I also recommend paying attention to, which will help you take your mind off everyday work and lift your spirits.

With the help of additional software, a flash drive can be used not only as a boot device for installing, reinstalling and restoring the operating system, but also to create an emergency device (Multiboot). This is a kind of resuscitator, a tool from which you can boot at any time and cure your computer of viruses, restore system files or save important data. I described how to create such a flash drive-reanimator in the article “Creating boot Live CD/DVD/USB devices and its application.” You can read this article.

Despite all the obvious advantages and the growing popularity of a flash drive as a bootable device, there are not so many programs for creating it. Nevertheless, they exist, and today I will introduce you to them in more detail, but first a few words about the preparatory stage.

Preparing a flash drive

We will need the flash drive itself, plus knowledge of some important aspects. First, you need to make sure that your computer supports booting from USB devices. There is a misconception that if in bios ( boot section) there is no option to select boot from usb (only floppi, hdd and dvd-rom options are present), then boot from usb is not supported. This is wrong!

More precisely, this is not always the case. The only correct solution is to refer to the manual (user manual) of your motherboard or using specialized software (as an option - AIDA64) to obtain a detailed report on the hardware used.

The second point is the size of the flash drive. Here everything will depend on what we write on it. For example, to create a Live-USB, installation Linux disk or Windows 7, a 4 GB flash drive is enough. To create a boot device with latest versions For Windows, it is advisable to have a flash drive of at least 8 GB on hand.

The third point is transferring files from a flash drive. Typically, the process of creating a boot device involves full formatting. If there is one on the flash drive important files, transfer them to another device in advance. To create a bootable USB flash drive and then use it as a boot device, use the USB-2.0 port (Windows 7 does not support USB 3.0).

How to create a bootable USB flash drive

Let's consider five in various ways using the example of five free programs for Windows.

A small but quite functional utility with the self-explanatory name WinSetupFromUSB. Equally well suited for recording a bootable and/or multiboot flash drive (up to 10 operating systems) and creating Live devices. Official website.

Among the shortcomings is the lack of support for the Russian language. Among the advantages, as I already said, is its versatility. The utility can work not only with Windows distribution, but also suitable for recording installation disk with Linux.

The usual option for creating a bootable flash drive, for example, with a Windows distribution, involves selecting the flash drive itself, the option to automatically format the media, and the ISO image of the operating system in the appropriate boxes. The recording process starts after pressing the “Go” button. You can read more about how this program works.

To create a multiboot flash drive (several OS), you need to specify the path to the ISO images of the operating systems. Paragraph Windows selection 10 at the time of writing this article is not available by default, but in reality everything is written and works, you just need to select the appropriate column with the available versions - Vista, 7, 8.

2. Rufus

Perhaps the simplest solution for creating bootable USB drives. Everything is simple and intuitive. Suitable for working on systems that do not have an installed OS. Official website rufus.akeo.ie.

The main advantages are speed of operation, simple interface, Russian language. An excellent solution if you need to create a bootable Windows 10 USB flash drive with UEFI support. By the way, I wrote in detail about how to do this in.

Distributed in the format of a regular installer and portable version. To create a bootable USB flash drive, in the utility window you need to specify the path to the ISO image to be written and click the “Start” button.

On new systems that use UEFI instead of BIOS, set the Partition Scheme and System Interface Type menu to GPT for computers with UEFI.
In other cases, the default settings will be sufficient. The option to format a flash drive is assigned by default.

3. Windows 7 USB/DVD Download Tool

This utility is official app from Microsoft. The interface is minimalistic, simple and clear, it is easy to work with. Download from the official website wudt.codeplex.com.

Perhaps the name of the utility (Windows 7 USB) will mislead many that with its help you can removable media You can only record the Windows 7 distribution. However, this is not the case. In addition to the seventh version, Windows 8.1 and 10 distributions can be stored on a flash drive.

The downside is that the utility is not Russified, but the simple and intuitive interface is designed to offset this drawback.

All that is required from the user is to insert a USB drive in advance, select an ISO image with the operating system and specify the path to the media (flash drive) to which this image should be deployed.

The operating principle of this program is based on standard operating room tools Windows systems- this is “diskpart”, “bootsect /nt60”, ISO unboxing to a flash drive. The program acts only as a graphical interface.

UltraISO is one of the best and most functional programs for working with disk images. A universal “harvester” that supports work with almost any known formats. Can work in tandem with Nero Burning Rom and integrates with virtual emulators. It will help if the boot disk image is not in ISO format.

The program can convert other image formats into ISO files - NRG, MDF, MDS, IMG, CCD, etc. using UltraISO you can edit ISO files without extracting them. The UltraISO interface has been translated into many languages, including Russian. For downloading, you are offered several editions of UltraISO, adapted for individual Windows versions, as well as a portable version of the program. Download link www.ezbsystems.com.

By and large, the program does not care what boot devices will be created with its help, with what operating system, what software and from what manufacturer. The ISO image to be burned must be opened in the program window either using the Open command in the File menu or using the browse button on the toolbar. This can also be done using a combination Ctrl keys+ O.

Then in the window that appears, if the program automatically selects the desired flash drive, you should click the “Burn” button.

Daemon Tools Ultra is a professional tool for working with images. The program itself is familiar to many users free version Lite, which allows you to mount virtual drives for reading disk images. Its more functional version- Daemon Tools Ultra - among other features, offers the creation of boot devices.

Among the disadvantages, it is worth noting that it is paid, but to create a bootable flash drive, you can download a free 20-day trial version on the program’s official website. Official website of the program.

Go to the official website and download the program. During installation, you must select a trial license type.

The program works with a huge number of disk image formats and can be used both to create a boot device with subsequent installation of the operating system, and to restore it (Live disk).

To create a bootable flash drive, in the main window of Daemon Tools Ultra, select the “Tools” menu item, and among its commands - “Burn boot image to USB". Or the hotkey combination Ctrl+B.

In the recording parameters window, specify the path to the image, enable the MBR overwrite option and click “Start”.

When the flash drive is ready, all that remains is to boot from it. The easiest way is to use the boot menu keys. The table below shows a clear example of such keys.

Of course, this is not the entire list of programs designed to create bootable devices, but for the vast majority of users, the capabilities and functionality of the listed software will be sufficient.

For example, Rufus program can be used as the simplest and quick tool to create Bootable USB drive with one Windows distribution or for BIOS firmware from under DOS.

There comes a time for every PC user when they need to reinstall Windows. But here's the problem. Disk drive is broken or is not in the device at all. What to do then, there is only one way out - create a bootable USB flash drive. How to make a bootable Windows USB flash drive, learn about it by reading this article.

Preparation

Before you create a bootable USB flash drive with Windows, you need to prepare. You need to have with you:

• flash drive with sufficient memory;
• ISO- Windows image 7;
• ISO image burning program.

The operating system required for reinstallation can be downloaded from the official Microsoft website. This can be done by paying a certain amount or by entering a special code that comes with the license boot disk Windows. However, not every user can afford to purchase an operating system. In this case, the ISO image can be used without special problems find in the open spaces World Wide Web. However, you should be careful. Attackers can insert various malware. Therefore, you need to download the image only from trusted resources.

It is also worth noting that the storage device will be completely formatted when recording the image. If there is any valuable data on it, then it is worth recording it on a separate disk or any other storage medium.

Creating a bootable USB flash drive

Making a bootable USB flash drive is very simple. Anyone can cope with this simple task if you follow certain instructions. There are at least 4 ways to install Windows 7 from a flash drive. They differ from each other in the software that is used to install Windows on a flash drive.

Windows 7 USB/DVD Download Tool

To create bootable usb drive, you can use the official tool from Microsoft. The program can be downloaded directly from the Microsoft website. To create a bootable USB flash drive with Windows 7, you must follow the following instructions:

When the image copying process is complete, you will have a bootable USB flash drive with Windows 7 ISO at your disposal. Now you can install Windows 7 on your PC.

Ultra ISO

There is another way to make a USB flash drive with Windows. This method implies the presence of a program called Ultra ISO. Ultra ISO- paid software for interacting with images. You can download a 30-day trial version. The program has quite extensive functionality. With its help you can record, edit, convert images, etc. But it is the recording function that interests us. You can burn a Windows 7 image to a USB flash drive using the following instructions:

As you can understand, the process of creating a bootable USB flash drive through Ultra ISO does not require any specialized knowledge. A bootable Windows XP flash drive can be made in the same way.

WinSetupFromUSB

To create a bootable Windows USB flash drive, you can use WinSetupFromUSB. The program has several functions for working with images. Nevertheless, we are interested in creating a bootable USB flash drive. The program consists of only one window and is quite simple to use. To create a flash drive, you need to do the following:

Now the Windows 7 bootable USB flash drive is ready and can be used.

Windows command line

You can create a bootable Windows USB flash drive using Command line OS. Creating a bootable flash drive this way is a little more complicated. However, you don't have to download any additional programs.

After preparation, you need to write the OS installation files to the device by simply unpacking the image downloaded from the Internet. And thus, you will have at your disposal a flash drive with Windows recorded.

Conclusion

This article examined the question of how to create a bootable Windows 7 USB flash drive to reinstall this OS. To solve this problem, you can use one of the four methods proposed above. Each user has the right to choose any of them based on their preferences or capabilities. To obtain the desired result, you must follow the instructions given above for the selected method.

Video on the topic

In this article I will tell you how to burn an image to a flash drive (in in this case Windows image) for subsequent installation of the system on a computer. Nowadays, many people have laptops and netbooks that simply do not have an optical drive, or there is no way to install windows from a disk; this is where creating a bootable one comes to the rescue windows flash drives 7. This article is primarily aimed at these tasks.

We will write the image to a flash drive in two ways. The first method will be implemented using a very good ultra iso program, and the second using WinSetup From USB. We will start by considering actions to work with ultra iso, since this method less labor-intensive and the process of creating a bootable Windows 7 flash drive will be quite fast. The second method will remain for those who, for some reason, “didn’t work out” with the first option.

Method No. 1

So, let's go. First, download the program Ultra ISO. After the program has been downloaded, installed and launched (click on the trial period if you don’t want to buy), you can begin the fairly simple process of writing Windows to a flash drive:

1. You must specify the path to the image that should be placed on your hard drive:
Click “File” => Open (Fig. 1)

Fig.1

Rice. 2

Rice. 3

Method No. 2

This method will also tell you how to write windows to a flash drive. What you will need for this option:

1. A little free time;

2. Computer (with iron, which supports booting from a flash drive);

3. Program for preparing a flash drive ( download);

4. Actually the flash drive itself (even an SD card will do);

5. An image of the operating system that we want to install.

As an example, I will show how we will write an operating system image to a 4GB SD cardMicrosoft Windows 7Home Premium 64-bit. I would like to immediately draw your attention to the choice of operating system. If your computer has less than 4GB of random access memory (RAM), then you should install a 32-bit (x86) version of the operating system, since a 64-bit version will simply clutter RAM unnecessary processes.

Insert the flash drive into USB port and format it to FAT32 or NTFS using Windows. To do this, you need to go to My Computer, find the flash drive there and right-click on its icon. IN context menu You should select “Format...”. In the formatting window, select file system FAT32 or NTFS (The latter will be better if the flash drive has a capacity of more than 4GB), and also select the cluster size " Standard size cluster" and click the "Start" button. Everything is shown in the picture:

Next, we download a small program in which we will do all the operations we need. There are several programs of this type, but I chose WinSetupFromUSB because it does not require installation and takes up almost no space on disk and easy to use.

Let's launch the program. First, we need to select the device on which we will burn the image. This is done in the drop-down menu at the top (if the flash drive is not displayed in this menu, click on the Refresh button). Next, we need to prepare the flash drive for recording the image, because if we simply copy the image, it will be impossible to enter the system installer, because there is no boot sector. To create it, click on the Bootice button.

In the Bootice utility window that opens, click the Process MBR button, then see if the Grub4Dos checkbox is checked (if not, check it) and click the Install/Config button. In the Config Grub for DOS window, click on the “Save to disk” button, the program will display a window that boot record successfully written to the drive.

We return again to the Bootice utility window, where we click the “Process PBR” button and do everything the same, without changing anything in the last window, click OK.

That's it, now all we have to do is write the image to a flash drive, this is done in the main program window, which we saw immediately upon launch. You need to check the required box - if you are going to install Windows XP, then this is the first checkbox, but if Vista or Seven - the second. Next, click on the “…” button on the other side of the checkbox and set the path where our unpacked image is stored on the hard drive, or simply mounted in virtual drive using DaemonTools or Alcohol. Click on the “GO” button and wait until the process finishes.

Upon completion, the program will display the message “Job Done!” That's it, dear friends, you can reboot and start installing the operating system.

Also, I advise you to read the article regarding