Logging into your TP-Link router personal account. You are already an ITNET subscriber

TPLINKLOGIN.NET- This standard address, where the entrance to the TP-LINK router is located. To enter the control panel settings, use the login and password “admin-admin”. Go to personal account TP-Link router can also be accessed by its IP - 192.168.0.1 or in some models 192.168.1.1. But what if you open http://tplinklogin.net, an error occurs - how to solve it? Let's figure out together how to log into a TP-LINK router.

tplinklogin.net - login to the personal account of the TP-Link router at 192.168.0.1

This instruction connection is universal and suitable for setting up any TP-Link routers - TL-WR740N, TL-WR840N, TL-WR841N, etc.

Friends!
Read this important information- today login to your TP-Link router personal account at " tplinklogin.net» is no longer available due to simple carelessness - the company forgot to pay for the domain, and it went into other hands. The router's web interface is now located either at the address " " or at the IP "192.168.0.1". Login and password for connection remain the same - admin-admin

Let's start, as they say, “from the stove,” and one of the most affordable routers TP-LINK TL-WR741N will help us with this today.

After this, most users open a browser and enter the address http://tplinklogin.net and in 50% of cases they receive an error that it is impossible to log in.

How to configure a computer to log into the TP-Link router using the TPLINKLOGIN.NET administrator address?

The whole point is in incorrectly set Windows settings connections network card PC to router. Therefore, we go to the computer’s network connection settings using the following chain: Start - Control Panel - Network and Internet - Network and Sharing Center shared access— Changing adapter parameters.

Right-click on “Connect by local network" and open the section "Properties - Internet Protocol Version 4"

Here you need to set the checkboxes on the IP address to “Automatically receive” and DNS servers— the router will give them to us automatically. Pay attention to the last point - in the event that certain public servers, for example, or 4.4.4.4, then you will not be able to access the address “tplinklogin.net” or “tplinkmodem.net”. Another possible option— write here, by default it looks like “192.168.0.1”

If you need, then the path to selecting a network adapter is slightly different - you need to right-click on “Start”, select “Network Connections” and then open the “Adapter Settings” section.

Save the parameters with the “OK” button.

TP-Link login error - 192.168.o.1/192.168.0.l/192.168.1.1

• Another very popular mistake lies in the user’s carelessness, when instead of the purely digital value “192.168.O.1”, the letter “o” is entered into the address bar instead of “zero”. Of course, you won’t be able to access the control panel using an incorrect address.
• The same applies when the letter “L” is written at the end instead of the number “1”
• Finally, it is possible that the IP was simply chosen incorrectly - instead of 192.168.0.1 they indicate 192.168.1.1 and vice versa

How to log into the personal account of a TP-Link TPLINKLOGIN.NET router via admin-admin?

We get to the admin panel - there are many menu items for configuring the TP-LINK router, but the easiest way is to start with “ Quick settings».

First you need to select the type of your Internet connection. Rely on automatic mode It’s not worth it - it’s better to find a paper contract for the provision of Internet access services and see there all the data necessary for connection. My Internet works in PPPoE mode - that’s what I’ll choose.

Next, set the TP-Link settings for wireless connections. On initial stage just come up with your name WiFi networks(SSID) and 8 character password. Select “WPA2-Personal” as the encryption type. The rest can be left as default.

In the last step, reboot the router.

These steps are enough to log into your TP-Link router’s personal account via the web interface at tplinklogin.net or 192.168.0.1 and configure it to work with the Internet. By the way, you can also use mobile application- a separate article is devoted to this. Start using it, and you can master the rest of the settings by reading other articles on our blog.
Good luck!

A router is a device that does not require constant control by the user. Usually, after the initial setup of the router, you can forget about it. for a long time. It will work according to the configured settings and will not disturb you in any way.

However, sometimes there is a need to go into the router settings. For example, in order to forward a port or. In this article you can find step-by-step instructions on how to enter the settings of your TP-LINK router.

Step #1: Open any browser.

Access to the router settings is made through the so-called web interface. The web interface is a small website that is located directly on the router and provides the user with convenient access to all parameters of the router.

To access this web interface you will need a browser. You can use any browser that is convenient for you. For example, Google Chrome, Mozilla Firefox, Opera or any other.

Step No. 2. Enter the IP address of your TP-LINK router into the address bar of your browser.

Step No. 3. Enter the login and password for the router.

After you have entered the IP address of the router into the address bar of your browser, a window for entering your login and password should appear in front of you. After entering your login and password, the router’s web interface will open in front of you, and you will be able to access the settings of the TP-LINK router.

At this stage, you may experience difficulties entering your login and password. If you are entering the settings of the TP-LINK router for the first time, or you have not changed your login and password yet, then you need to enter the standard login and password. In most cases, TP-LINK routers use the admin login and admin password. If this data is not suitable, then you can look at the instructions from the router or the sticker on its bottom.

If the standard login/password pair does not work, it means it has been changed. In this case, you need to remember what login/password you used. If you can’t remember your login/password, then you can do it. This is done using the RESET button, which is usually located on the back of the device. But, you need to take into account that after resetting the settings, the router will have to be configured from scratch.

In this instruction I will show in detail how to configure a TP-Link Wi-Fi router to work with the Aist Internet provider. It is equally suitable for the following router models and their modifications:

• TP-Link TL-WR740N
• TP-Link TL-WR741N
• TP-Link TL-WR841ND

The step-by-step guide describes the following steps: how to properly connect a TP-Link router for subsequent configuration, how to log into the router’s web interface, setting up an Stork PPTP Internet connection, and setting a password for a wireless Wi-Fi network.

How to connect a TP-Link router

There are five ports on the back panel of your device, one of which is designated WAN - you need to connect the Stork Internet cable to it.

Connect one of the ports marked with numbers using the supplied cable to the network connector of your computer or laptop. During initial setup, it is better to use a wired connection, this will reduce the number of nuances that may cause difficulties.

In addition, pay attention to the following points:

1. In the local network connection settings on the computer, the TCP/IP protocol parameters should be set to “Obtain IP automatically” and “Connect to DNS server automatically”.
2. Your Stork Internet connection must be disconnected during setup, as well as after it (the router will establish the connection itself). If you have the Aist Online program installed on your computer, disable automatic connection to the Internet and disconnect the Stork connection.

Hopefully the router is already plugged in, let's move on to the next step.

How to enter the settings of a TP-Link router

To enter the router settings, launch any Internet browser and enter tplinklogin.net or 192.168.0.1 in the address bar.

After this, you will see a window to enter your password. The standard login and password for a TP-Link router is admin. Also, information for entering the settings web interface is available on a sticker on the bottom side of the Wi-Fi router. If for some reason the standard password does not work, you may have changed it during previous setup attempts, in which case you can either try to remember it or reset TP-Link to factory settings.

As a result, you should be on the main page of the web interface, where all subsequent actions will be performed.

Setting up Internet Stork on TP-Link

First of all, it should be noted that when setting up a router for Stork there is one nuance, namely the need to change the LAN address in the router from 192.168.0.1 to 192.168.1.1 and here’s how to do it.

In the menu on the left, select “Network” - “Local Network” and in the “IP address” field enter 192.168.1.1, and then click “Save”.

After rebooting the device, the connection with it will be lost. Wait a little and go to the TP-Link settings at the new address (enter it in the address bar, if necessary, reconnect to the wireless network if the settings are made via Wi-Fi).

The next step is to configure the Stork PPTP Internet connection in the router’s web interface. To do this, go to the menu item “Network” - “WAN” and fill in the fields as follows:

• WAN connection type - PPTP/Russia PPTP
• Username - your login from the Internet Stork
• Password and password confirmation - your Internet password
• IP address/Server name - server.avtograd.ru

There is no need to change any other parameters. Click "Save". If everything was done correctly, and the Internet connection in Aist Online is disabled, the router will establish a connection (to see the status change from “Disconnected” to “Connected”, you can simply refresh the page in the browser).

Setting up Wi-Fi on a TP-Link router

The last step is to set up a wireless network and set a password for Wi-Fi, to do this:

This completes the setup of the TP-Link router for Aist, and you can connect from your phone, laptop or tablet to your own wireless network and use the Internet.

– one of the most successful models for simple home networks.

Today we will dwell in detail on the very popular question “where to find the router settings on the computer” and tell you how to reset the tp link router settings to factory settings.

How to enter the tp link router menu?

In order to enter the tp link router settings, you will need:

• - First, turn on the router to a 220V power supply and connect it to the computer using a special network cable (which, as a rule, is included in the basic package of the device). In principle, you can connect a PC to any port of the device, but it is recommended to use the first connector.
• - To access the router settings from a computer, you need to between the router and this PC. To do this, your computer should be assigned the IP address of the router (each router initially has its own IP), which can be found on the label on the back of this router. In most cases, this is a combination of numbers 192.168.0.1 or 192.168.1.1.

Accordingly, the computer being configured must be assigned an IP address of 192.168.0.2 or 192.168.1.2, a subnet mask, etc. (You can read more about setting up a local network in the article: )

- Next, to go into the tp link router settings:

Open any Internet browser on your computer (Opera, Google Chrome, Internet Explorer, etc.);

• - IN address bar(where it says http://www...) erase everything, enter the IP address of the router 192.168..1.1 (the one indicated on the device label) and press the Enter key.
• - If the previous steps were completed without errors, then a settings login window should appear in the browser this router. Here, to enter the menu, you will need to enter your username/password, which can also be found on the router label. As a rule, the default pairs are login-admin, password-admin or login-admin, password-1234, but in the future it is recommended .
• - After entering your login and password, click the “Login” button (or the corresponding one) and the web interface of your router will open in the browser window. By the way, you can enter the settings of a d link router, or any other router from different manufacturers, in the same way.

How to reset a tp link router?

It is also necessary to mention how to reset the router to factory settings. This operation may be required if the authentication data specified on the label is not suitable and the user does not know the new router login/password.

In this case, it makes sense to reset the router settings to factory defaults and reconfigure your router. To do this, on almost all types of routers, next to the power button there is a small hole labeled “Reset”, inside which there is a button to reset the router settings.

To reset the settings, just gently press this button with something thin (for example, a needle), hold it in this state for 5-15 seconds and wait for your router to reboot.

On different models For routers, pressing the reset button should be done:

• - either with the device plugged in,
• -with the router disconnected, which should be connected to power with the reset button pressed: it’s okay if you try both options.

Also, if you can enter the router settings, you can reset the router settings in the web menu of this device. To do this, find the “settings” tab, then “reset” and wait until the device reboots.

Many owners of home wireless and wired routers They don’t know how to go into the router settings. In our article we will look at all the features of logging into the router and tell you how to log into the router yourself, on your own. It is worth noting that there is nothing complicated about logging into the router and any untrained user can figure out this procedure.

Today there are quite a lot of router manufacturers: ASUS (Asus), D-link), Huawei, Linksys, MikroTik, NETGEAR, TP-LINK, TRENDnet, Ubiquiti, Upvel, ZyXEL and others. But in fact, everything is simple and you most likely could do without our instructions, because the answer to the question of how to enter the router settings is described in the manual, which can always be downloaded from the manufacturer’s website specifically for your router model. It is enough to know the model and ask the correct query in the search engine. But there are some features that beginners computer users and it’s just that people who are not particularly versed in configuration don’t pay attention. Or they don’t know what to pay attention to. So, let's figure out how to log into the router quickly and independently.

What is a router

Since some novice users do not quite understand what a router is, we will try to explain the difference between various home communication devices for accessing the Internet. The first group of devices are USB 3G modems, which are mainly sold by mobile operators Yota, MTS, Beeline, Megafon and Skylink, and allow you to access the Internet via wireless technology 3G. These modems do not have an internal interface with settings, but only an external software shell, which is installed as regular program. Therefore, you can go into the settings of such a modem quite easily. Here's what these 3G modems look like:

Next category of home digital devices, allowing you to access the Internet - ADSL modems and access points, which are very similar to routers, but work on a different ADSL technology, allowing you to connect via a telephone line without occupying it. Such modems usually have their own internal interface. Often providers (for example MGTS) provide such modems for rent and block access to the settings or simply do not tell you how to get into the settings. This is what it looks like back panel ADSL modem:

The last group of devices, which is probably the most common among home Internet users, is ordinary routers, or as they are called in narrower circles, routers. Routers have much more settings, unlike the 3G and ADSL modems mentioned above. Currently, the most common are routers with Wi-Fi technology, which allows you to connect devices to Wi-Fi modules wirelessly. There is also pitfall, - if your router was installed and configured by your provider (for example, Beeline or Rostelecom), then entering the router menu may be problematic. Such routers are also called Wi-Fi access points:

Preparing and connecting the router

This chapter of our instructions will be dedicated to those users who have just purchased a router and are planning to connect it. We would like to recommend our other instructions for connecting and configuring routers - and how to do it yourself. Now let's look at what you need to log into the router:

• The router itself, whether it supports Wi-Fi or not.
• Network cable, which is usually included in the kit. If you don’t have such a cable, then buy it at a computer store.
• Computer or laptop with a network card. On modern laptops and computer motherboards, network cards are usually present.

We connect the network cable with one end into the computer’s network card, and the other into one of LAN router ports. It all usually looks like this:

The blue arrow shows the LAN port, that is, the port of your internal network, while the blue cable connects the LAN port and the network card of your computer or laptop. The red arrow points to the WAN port of the router. This port is responsible for connecting to the provider and a wire coming from the provider is plugged into it. Pay attention to the connectors located to the left of the cables on the router. These are standard RJ-45 connectors; the same connector needs to be found at the back of the computer or on the side of the laptop and connect the wire leading to the LAN port of the router into it. After this, you can enter the router settings through your computer.

At this stage, an unprepared user may begin to look for router settings in the operating system (usually Windows). Therefore, keep in mind that there are no router settings in the control panel, device manager, or Start menu item. The second mistake a newbie makes is searching for a driver for the router. This is also impossible, since there are no router drivers that are installed in the operating system. The exception is automatic USB configuration when you plug in a 3G or ADSL modem into a USB port. We will now tell you how to enter the router settings.

How to enter the router settings

First, you need to check what settings are included in your network connection. The network connection responsible for communication with your router appears after you connect the network cable from the router to the network card of your computer or laptop. In order to access a network connection, you need to find it using the following path in Windows:

Start > Control Panel > Network and Sharing Center > Change adapter settings

Or there are Windows console commands that allow you to quickly get to “Network Connections”. Console commands are executed through the executive command prompt in the Start menu, which is called "Run" or says "Search programs and files." There are two commands that have the same effect. First team - control netconnections:

Second team - ncpa.cpl, which will also allow you to get into network connections:

Select the network connection responsible for communication with the router and go to its properties (right-click on the connection and select the “Properties” menu item). In the connection properties, find the item “Internet Protocol version 4 (TCP/IPv4)” and click the properties button, which is located just below.

Typically, after entering the properties of the Internet protocol, you can see the following picture:

If the point is not on automatically obtaining IP and DNS, but some specific values ​​are written down that are left over from your provider, then you need to write them down and put points on automatically obtaining an IP address, as shown in the picture above. This is done so that the router issues an IP address to the network card and this network connection. After that, launch an Internet browser, any will do. We try to enter the IP address of the router into the address bar. Depending on the manufacturer, the address can be either 192.168.1.1 :

Or the address will be 192.168.0.1 :

After pressing the key Enter An authorization window should appear that looks something like this:

Naturally, neither the login nor the password will be indicated in the required fields. If you don’t know them, then there are two options for how to enter the router settings:

1. Find the instructions for your router model and look at the login and password that are set to log into the router interface by default. Usually the login is admin, and the password can be admin, empty string or numbers 1234 . But in order not to guess at the tea leaves, it is better to find the instructions.
2. If the router has already been configured before, then the password and login may have been changed. IN in this case, you can only get to it by resetting the settings using the “Reset” button, which is located on the back of the router.

Attention! When you use the “Reset” button, all settings on the router will be lost and you will have to configure it again.

If you can’t enter the router settings

It may happen that your router does not distribute IP addresses automatically and you will not be able to enter the router menu right away. You will have to establish a connection with it manually. What to do if you do not know the address of the router, but in the browser when you enter 192.168.0.1 or 192.168.1.1 Do you get the message "The page cannot be displayed"? First, find out the IP address of the router. To do this, right-click on the network connection and select the “Status” menu item:

As you can see in the picture, you need to find the line “Default gateway IP”, the value of which will be the address of the router. After this you need to go to properties again network connection and in the properties of the TCP/IPv4 protocol, as we described above and install following values(for router address 192.168.0.1 ):

• IP address - 192.168.0.2 (or any other IP up to 192.168.0.254)
• Mask - 255.255.255.0
• Gateway - 192.168.0.1
• Preferred DNS Server - 192.168.0.1

For a router with an address 192.168.1.1 the settings will be as follows:

• IP address - 192.168.1.2 (or any other IP up to 192.168.1.254)
• Mask - 255.255.255.0
• Gateway - 192.168.1.1
• Preferred DNS Server - 192.168.1.1

Finally, a few popular questions on the topic of how to access the router settings:

• Question: Tell me how to log into the Asus router? Answer: The IP address of most Asus routers is 192.168.1.1 . However, the address is mine
• Question: Tell me how to log into the tp link router? Answer: The IP address of most TP-Link routers is 192.168.1.1 .
• Question: Tell me how to log into the d link router? Answer: The IP address of most D-Link routers is 192.168.1.1 , used on older models 192.168.0.1 .

Of course, the easiest way is not to guess, but to find out the address and log into the router using the methods that we described in this article. We hope it was useful. If you have any difficulties, ask questions in the comments, indicating the router model.

TPLINKLOGIN.NET- this is what the standard address looks like where you need to log in to the browser to configure the TP-LINK router. Depending on the router model and device type (modem, router, access point), it may also look like tplinkwifi.net or tplinkmodem.net. But this problem often happens when you open an address tplinklogin.net, an error occurs. Let's figure out together how to get to the administrator section and configure TP-LINK.

Let's start, as they say, “from the stove,” and one of the most affordable routers TP-LINK TL-WR741N will help us with this today.

We connect the router to the computer using a network Ethernet cable, which usually comes with the router. This cable must be connected to the RJ-45 network connector of the motherboard or a separate network card of the computer.

The other end goes to the “LAN” port on the router - it is yellow on TP-LINK. And in the blue connector is a cable from the Internet provider.

After this, we connect the power to the router, turn on WiFi with the “ON” button on the case and reset the settings to factory settings using the small in-depth “Reset” button - to press it you need to take a pencil or any other thin object, press and hold for 10 seconds.

Next, go to the computer’s network connection settings. We will get to them by going through the following chain: Start - Control Panel - Network and Internet - Network and Sharing Center - Changing adapter settings.

Right-click on “Local Area Connection” and open the “Internet Protocol Version 4” section

Here you need to check the “Automatically receive” checkboxes on the IP address and DNS servers - the router will give them to us automatically. Pay attention to the last point - if certain public servers are registered as DNS, for example 8.8.8.8 or 4.4.4.4, then you cannot go to the address “tplinklogin.net”, “tplinkwifi.net” or “tplinkmodem.net”. it will work out. Another possible option is to enter the IP address of the router here; by default it looks like “192.168.0.1”

We apply the settings with the “OK” button and open the browser, where we enter the treasured address “tplinklogin.net”. A window for authorization will open - enter the login-password pair “admin-admin”.

We get to the admin panel - there are a lot of settings for the TP-LINK router, but the easiest way to start is with “Quick Settings”.

First you need to select the type of your Internet connection. You should not rely on the automatic mode - it is better to find a paper contract for the provision of Internet access services and see there all the data necessary for connection. My Internet works in PPPoE mode - that’s what I’ll choose.

Next, set the Tp-link settings for wireless connections. At the initial stage, all you need to do is come up with the name of your WiFi network (SSID) and an 8-character password. Select “WPA2-Personal” as the encryption type. The rest can be left as default.

In the last step, reboot the router to apply the settings.

This is enough to work with the Internet. Now you can go to the WiFi settings from any smartphone and connect to the created network using the specified password. Start using it, and you can master the rest of the TP-LINK router settings by reading other articles on our blog.
Good luck!

The tplinkwifi.net address is used to enter the settings of TP-Link routers. Web interface, router website, personal account, settings page, system - as they name it, the router control panel, which can be accessed through a browser by going to the address indicated on the router. If you are unable to access the settings of your router, now I will try to explain in detail what and how to do to access the router settings.

Not long ago, TP-Link began using the address to enter the settings of its routers tplinkwifi.net. Including for models: TL-WR841N, TL-WR741ND, TL-WR940N, TL-WR840N, TL-WR720N, etc. You most likely saw it on the case of the router itself, or in the instructions. Also pay attention to the factory login and password (admin and admin). They are also required to enter the settings page. This information will look something like this:

Previously, the IP address was 192.168.1.1, or 192.168.0.1. But even now, at 192.168.0.1 you can enter the settings. So, if your tplinkwifi.net address does not work, you can try going to 192.168.0.1.

Now let's try to figure out why you didn't go to the page with your settings at tplinkwifi.net Wi-Fi router, and to this site.

How to log into tplinkwifi.net and enter the username and password admin?

You just need to type the address in the browser and go to it. Next, the authorization page should open, where you need to specify your login and password (admin, if you have not changed them), and log into the web interface. But, if you are reading this article, then most likely you were not able to do this. Let's try to find out why.

Another important point here is that there may be no access to the Internet. (yellow exclamation mark near the connection icon), since your router is most likely not yet configured to connect to the Internet. But this is not a big deal, since you don’t need the Internet to access tplinkwifi.net.

You need to do two things:

• Go to tplinkwifi.net (or 192.168.0.1).
• Enter your username and password. Factory settings: admin and admin.

After this, the control panel should open. The page itself may differ depending on the firmware.

Some more tips and links to useful articles:

• Check your connection to your TP-Link router. Is it turned on? It is possible that your computer or laptop is connected to the Internet in another way, for example, via Wi-Fi. Disable all connections, leaving only the router whose settings you want to go into.
• Try visiting tplinkwifi.net from a different browser. Or better yet, from another phone, computer, tablet. Try it.
• It is possible that the router address or login and password have been changed. In this case, either the settings page will not open at all, or the error that the password and/or login is incorrect will not appear. In this case, you need to do.
• If you still cannot access tplinkwifi.net, then see the recommendations from the article:.
• There is no need to rule out a hardware failure of the router. Pay attention to the operation of the indicators.

If you did not find the answer to your question in the article, or something is not clear, you can leave your question in the comments. There you can share some useful advice on the topic.

Tplinklogin.net - url address for logging in and setting up your personal account for TP-Link routers using login and password: admin - admin (out of the box), synonym for IP addresses: 192.168.0.1, 192.168.1.1; and tplinkwifi.net. Tplinklogin.net is designed to make it easy to remember the router login address - the text address is easy to remember, unlike the digital IP. By typing this address with a correctly connected router via Wi-Fi or local network, you will be logged into the management system of your own router. When typing an address in a browser through a device that is not connected to a TP-Link router, you will be taken to another website and not to the router settings.

Figure 1: sticker of the router indicating its address, login and password.

The address http://tplinklogin.net is supported by TP-Link routers with firmware from 2011, including the popular TL-WR720N, TL-WR741ND, TL-WR840N, TL-WR841N, TL-WR940N, new routers, modems and TP routers -Link: C2, C7; C20, C30, C50, C70 and older models. Difficult to find work modern device without the support of this address.

How to log into the router at Tplinklogin.net

If the connection is made according to the instructions and the equipment of the computer, laptop, tablet, phone and router is working properly, then after connecting the router, open the browser and type the address tplinklogin.net, having previously connected to the created local network or via Wi-Fi. When connecting for the first time, the login and password for logging in are: admin and admin. If the device is not new, then indicate the login and password to which the admin-admin pair has been changed. Step by step instructions in Figure 2.

Figure 2: browser with the address tplinklogin.net, login field admin, password field admin.

1. Open a browser: Internet Explorer, Opera, Firefox, Google Chrome, Safari or another;
2. go to tplinkwifi.net or 192.168.0.1, 192.168.0.1;
3. fill in the login and password fields, default admin-admin;
4. Click the "sign in" button or press "enter" on your keyboard.

That’s it, the login to the router’s personal account via tplinkwifi.net has taken place. If a mistake was made and you couldn’t log in, read on.

Problems logging into the router's personal account

• Make sure you spell it correctly:
  Right: Tplinklogin.net, https://tplinklogin.net, www.tplinklogin.net or http://tplinklogin.net, http://www.tplinklogin.net, http://www.tplinklogin.net;
  wrong: tplinklogin. net, tp-linklogin.net, tplinklogin, tplinklogin net ru, tplinklogin net.
• check the connection of the router to the computer via WAN or WiFi to the smartphone (device via wireless communication). Connect the device not just to the Internet, but to the network specified on the router. The tplinklogin.net site works locally, setting up the Internet is unimportant;
  
• Make sure you enter tplinkwifi.net in your browser's address bar. If you enter the address into the search window, you will see a message that there is no connection to the Internet, or search results, if the router is connected to the Internet. Try using another browser: Firefox, Chrome, Mirosoft Edge, IE, Opera, Safari, Tor;
• IPv4 protocol property settings block the operation of the TP-Link router. To operate the router, specify “automatically obtain IP addresses and DNS.” IPv4 settings on Windows are discussed in the article and;
• the router uses something else local connection, for example, via a WAN cable and via Wi-Fi at the same time;
• the router is not connected to the network;
  
• try to specify not Tplinklogin.net, but tplinkwifi.net, 192.168.0.1 or 192.168.1.1;
• change input device. It was not the router that could have broken down, but the hardware responsible for transmitting network data in a computer, tablet or smartphone.

If the router panel opens, but you cannot log in, then the problem lies in the password, it has probably been changed from admin.

List of addresses for setting up TP-Link equipment

• tplinkwifi.net - WiFi routers TP-Link latest generations;
• tplinklogin.net - Wi-Fi router produced by TP-Linkl
• tplinkap.net - TP-Link access points;
• tplinkextender.net - TP-Link repeaters and signal amplifiers;
• tplinkmodem.net - TP-Link ADSL modems and routers.
• 192.168.0.1 or 192.168.1.1, depending on the model.

List of default passwords and IPs

If you still haven’t been able to log into your personal account, read the article where all the potential problems are discussed:.

Video on the topic (in English):

Most citizens have a router at home that allows them to access the Internet in normal mode(via a network cable) and wirelessly. From time to time, users need to log into their network device and change, for example, the password to Wi-Fi networks. Unfortunately, sometimes errors occur in the operation of the router. Let's look at how to go into the tp-link router menu settings and solve existing problems.

Before entering the tp-link router settings, you need to connect it to workstation. The router usually comes with everything you need to connect it.

First you need to decide on the installation location. It is best to place the network device in the center of the living space as far as possible from household appliances. Otherwise, even an ordinary microwave oven with its radiation can disrupt the stability Wi-Fi signal. As a result, there is a constant loss of connection to the Internet and a temporary inability to enter the router configuration menu.

After installing the equipment, you need to connect it to electrical network. Within a few seconds the device is activated. Next, use one of the methods below to go into the settings of the tp-link router.

By wire (LAN)

The first method is necessary to connect it directly to the computer. For this you need network cable connect one of the connectors on the TP device to the network card connector on the computer.

The cable looks like this:

TP router:

Card connector:

If the connection is made correctly, the indicator light on the device will light up under the number of the socket where the cable was connected:

Now we go to the TP modem.

Via wireless network (Wi-Fi)

An alternative option is to connect via a wireless network. This will require availability wi-fi module on the computer. Turn it on, find the network and connect. Depending on the model, the communication password is either missing or is set by default as a set of randomly generated numbers.

If when using wireless connection It was not possible to establish a connection with the TP equipment, you should use the first option.

The second method has advantages over the first in that connection to the TP-Link router menu is carried out not only using a computer, but also via a phone/tablet. That is, it is possible to enter the configuration menu from a mobile device.

Logging into the settings of TP-link routers

After the connection to the router has been established, you enter the settings of the tp-link router. To do this, you need to open your browser and enter the numbers in the address bar that are indicated on the case.

The numeric codes look like this: 192.168.0.1 or 192.168.1.1, and the letter key: tplinklogin.net.

It all depends on the model of the purchased TP device. It also contains the login and password in order to log into the router.

Having specified the correct address, the user sees an access dialog box on his computer:

Factory settings for login and password are admin. After entering the login and password, the user is allowed to enter the configuration panel, or “admin panel” of the TP router.

Possible problems and solutions

Below is a list of the most common typical problems that the user encounters when trying to log into settings home router"Tp-link." Let's look at each of the errors in more detail.

Invalid IP address

A common problem that occurs when a user tries to access settings tp-link modem– this is an invalid IP address. The error is as follows. The IP address in your browser's address bar does not match the router's IP address.

To understand what address the router has, you need to do the following. Left-click on the network connection sign in the lower right corner of the computer screen and open “Network and Internet settings”:

In a new window, go to the “Network and Sharing Center” menu:

By default, the current connection is named “Ethernet”. To find out the required information, you need to go to information window. Right-click on it and select “Information”:

The current address of the equipment is contained in the “Default gateway” field:

Close the current dialog and run to the router tp-link input with the specified address.

Now access to the router settings is open.

The router's IP is on a different subnet

A special case - problems with an incorrect IP address - is when the router and computer are on different subnets. For example, the IP address of the user's computer is 192.168.0.3, and the router is 192.168.1.1. In this case, the question arises: how to enter the basic Wi-Fi settings of the tp-link router. To correct this situation, you need to do the following. Go to the “Network and Sharing Center”, as described in the previous paragraph. The current connection, by default, is named “Ethernet”. Right-click on it and select “Properties”:

A non-standard port is used to enter the router settings

A rare case is when, in order to enter the current settings of the TP-Link router, they use a different port. This situation arises if someone has already used the router and changed its configuration for themselves.

You can try to go to the universal address for network devices from TP – tplinkwifi.net, but, unfortunately, it is not available for all models. If the browser opens a window as a result, it means that you will not be able to access the equipment and you should simply return to the factory configuration:

To return the settings to factory settings, you should use the instructions for resetting the configuration specified in the “Problems with the router” section.

Network interface is disabled

Shutdown network interface possible both on the equipment side and on the workstation side. If the interface on the TP router is disabled, you should simply connect the cable to another connector:

Depending on the models there are four, two or sometimes one network port. Accordingly, in the latter case, this option will not work, and the user will not be able to access the settings of the tp-link wifi router.

If the problem is on the user’s computer, first of all, you should disable the antivirus and firewall. Situations arise when the program simply blocks all connections and accepts them as a false threat.

Another option for the network interface to be unavailable from the user’s side is a driver problem. To check, you need to go to the device manager. Right-click on the “Start” button and select the required section:

There should be no yellow exclamation marks or red cross in the dialog box that opens. network adapter. If all drivers are installed correctly, the window looks like this:

After completing all the points, you should try to go to the main menu of the equipment.

Problems with the router

When the owner of the router says: “I can’t access the settings of the tp-link router and have tried all the above methods,” perhaps the reason lies in physical damage to the cable. For example, network wire pinched by a chair. Another option: the cable from the provider fell out of the router connector.

If the user still does not enter the settings of the tp-link router, it is worth trying to change the IP addressing settings of the device itself. To do this, reset the TP router settings to factory settings.

On the reverse side there is Reset button. It is noticeable to the touch, and sometimes is recessed into the router body. In the first case, just pinch it with your finger, but in the second, you will need thin instrument, for example, a needle or a thin screwdriver. Keep the button pressed for 10-15 seconds.

After a successful reset procedure on the router, all of them should blink at the same time. indicator lights. Next, the device reboots within one minute. After this, you should open the browser and go to the configuration menu again.

It's almost universal method solutions to many problems that arise when working with a router. But if resetting the settings does not help, then you should contact a service center.

Forgot your router password

Another option: the user has forgotten the password in the network device menu. You should try to log into the network device by trying possible passwords. But it is better to use separate instructions that tell in detail how to solve this problem.

An alternative option is to reset the TP equipment configuration to factory default. The method is described above.

Forgot your network password

Users also forget their wireless network password from time to time. But it is easy to find out using the router control panel or using special programs. There is another instruction about this in more detail.

Conclusion

After reading this article, the user will no longer have problems with tp-link and the question of how to enter the router settings. The main problems are considered and recommendations are given on how to solve the problem on your own. If the user still does not enter the settings of his tp-link home router, he should contact specialists who can help solve his problem.