• Windows 7 bootable flash drive. Five programs for creating a bootable flash drive

    Today, more and more laptop and PC manufacturers refuse to integrate an optical drive into their devices. This can be explained by the fact that CD and DVD media have lost their relevance. They have been replaced by smaller media such as memory cards and USB flash drives. Moreover, in slim body It is simply impossible to integrate a drive into an ultrabook. This trend has led to some inconveniences, for example when installing operating system. Creation bootable flash drive Windows 7 becomes simply necessary.

    How to create a bootable USB flash drive

    What is needed:

    • Flash drive
    • UltraISO program
    • DVD image with Operating System

    The storage capacity must be at least 4 gigabytes. This is how much a standard one weighs copy of Windows 7. Larger storage capacity can be used.

    If you have everything you need, we proceed to the actual creation.

    First, insert the flash drive into any free USB port. Make sure there is nothing on it that you need, as all information will be erased from it.

    If you are recording an image from a laptop, check the battery charge and, if necessary, connect to a charger.

    If the computer turns off during recording, there is a high probability that the flash drive will turn into a useless piece of plastic.

    Step by step instructions:

    1. Launch UltraISO program. This must be done as a computer administrator, otherwise the program will not be able to start the recording process. Click the right button. mouse on the program shortcut and select “run as administrator”.

    2. After the program starts, open your ISO image file in it. In the left top corner program, click on the file->open button or press the CTRL+O button combination.

    3. Select the file with the Windows 7 image in the window that opens and click “open”.

    4. The selected disk image will open in the program and you will be able to see all the files that it consists of.

    5. Then, go to top menu programs to the “Boot” item. In the drop-down list of actions, click “Burn Hard Disk Image”.

    6. Another window will pop up where you will need to select recording options. First you need to specify which device the image will be written to. Opposite the “Disc Drive” option in the drop-down menu, select the flash drive that you prepared.

    7. Opposite the “Recording method” parameter, select the “USB-HDD+” mode. Next to “Hide boot partition” put “no”. After this, you can safely press the “Record” button. The remaining parameters do not need to be touched.

    8. After this, the process of writing the selected image to removable media. This usually takes 10 to 15 minutes.
    You can check the status of the process by looking at the event log at the top of the window and at the progress bar. Above it will be indicated the percentage of the recording completed, as well as how much time has passed and remains.
    Do not close the program or turn off the computer during this time. If this happens, you risk ruining the flash drive.

    9. Once the recording is complete, you will see a message in the event log stating that everything is ready and the recording was successful.

    From a USB drive, installing Windows 7 is faster than from regular disk. This is because USB 2.0 speeds are much faster than an optical drive.

    10. The creation of a bootable USB flash drive has come to an end. All that remains is to check its functionality.

    To do this, insert it into the USB port of the computer or laptop on which the installation will take place. Turn it on and go to BIOS. To do this, hold down the DEL or F2 key. After the transition, check your download priorities. In loading priority (First Boot Device) should be your flash drive. Save the settings by pressing the F10 key and restart the computer. If the installation process starts, it means you did everything correctly.

    When purchasing licensed software, the buyer receives it on a DVD. Therefore, to install it on a PC that does not have an optical drive, you need to create a bootable flash drive. Our step by step instructions will help you with this.

    Load into Windows environment PE and roll back to a pre-created recovery point if Windows does not boot, or restore the computer from a pre-created image if it was not possible to resuscitate the system by returning to the recovery point. + creating a bootable USB flash drive is much easier than creating a disk. In general, I encourage everyone to use flash drives instead of disks.

    Friends! In the previous article about creating installation disk I dwelled on this in detail. Here I will go over the main points.

    1. I go to http://idimm72.ucoz.net/ and see which version of the assembly is current at the moment
    2. I'm looking for this assembly on torrent trackers - for example. and I shake her.

    After I have an ISO image on my hard drive that has converged checksums I'm moving on to creating a Windows 7 installation flash drive.

    You can read and see how and where to download the original image of Windows 7. How to edit a Windows ISO image can be viewed and read in this article.

    Windows 7 installation flash drive using UltraISO

    Using UltraISO, I am able to make fewer body movements and, accordingly, create bootable flash drives more efficiently. I hope you enjoy this method as much.

    Download and install UltraISO

    Choose additional features. I don't need a desktop shortcut and an emulator. I uncheck these boxes and press Next >

    Click Install

    Click Complete

    When starting UltraISO, select Trial period...

    UltraISO launches. Click File > Open...

    Click Format

    We check that we want to format the flash drive. By default I have it set to file system NTFS. This suits me, since I can then add a movie or image larger than 4 GB. I leave the Quick checkbox and press Begin

    Before clicking OK in the next window, it’s time to check and copy all important data from the flash drive. Once this is done, click OK

    My flash drive is used for ReadyBoost technology, so another warning is issued. I press Yes

    Wait for formatting to complete and click OK

    Checking what's in the field Disk Drive The flash drive we formatted was selected. Click Write down

    A warning appears that all information that you can still try to recover will be deleted or overwritten. Click Yes

    The process of creating a Windows 7 installation flash drive will begin.

    Close the image recording window with the button Back or with a cross at the top right

    Close UltraISO.

    The Windows 7 installation flash drive has been successfully created.

    Using UltraISO you can also create an installation disk.

    If you inserted a DVD-RW, you can erase it first, then select the writing speed. Typically, high-quality discs are obtained when recording at a speed two times slower than what is written on the disc itself. I have 8x on my disk, so I set it to 4x. Click Write down

    Must receive an installation disk.

    Bootable Windows 7 USB Flash Drive Using Windows 7 USB/DVD Download Tool

    Let's find and download this utility.

    From the drop-down list, select the desired flash drive (if you have several inserted) and click Begin copying

    Now is the time to check the flash drive for important data and copy it to a safe place (Dropbox for example). To erase the flash drive, click Erase USB Device

    Another warning about data loss on the flash drive is displayed. Click Yes

    Increasingly, USB drives are used to install or reinstall the operating system. They are not only easy to transport, but also more functional than CDs (for example, a netbook does not have a disk slot).

    Sometimes during the installation of new software a driver error may occur: “Not found required driver for floppy drive optical disks" In this case, you should connect the flash card to a different slot. Usually this problem occurs among users of new PCs equipped with 2.0 and 3.0 USB ports. The newer port is not supported by Windows 7. You can identify it by its blue color.

    We will tell you how to create a bootable Windows flash drive 7 in several ways.

    What do we need to create a bootable USB flash drive?

    To create a bootable USB flash drive, we need the following things:

    1. A disk with a recorded Windows 7 OS or its image.
    2. Empty flash drive, size 4 GB or more.
    3. Settings that make it possible to work with a flash card in the BIOS.

    If you do not have a boot disk, you can download the OS from the Internet. Use only trusted sites.

    Format flash drive

    As for the memory card, it must be completely cleaned. To do this, you need to resort to formatting. Save important files before starting this process. The formatting itself can be done as during recording boot file, and before that.

    To clean the flash drive, connect the USB to your computer. In the My Computer folder, right-click on the icon of the desired removable drive. Click "Format".

    When specifying parameters, select the NTFS file system. You can also change the name of the removable drive (Volume Label). Other indicators should not be changed.

    The flash drive can be formatted using the command line. To do this, write in it: format H:/FS:NTFS/Q/V:My_Fleshka and press Enter.

    Selecting boot in BIOS

    To select boot from a flash card, enter the BIOS. Typically this will be done by pressing Delete or F2.

    First, you need to make sure that the USB controller is turned on. The status can be checked in the Integrated Peripherals tab. Opposite USB Controller and USB Controller 2.0 should be Enable.

    Command line

    Burning a bootable Windows 7 USB flash drive using the command line is the simplest method, which does not require additional software downloads. However, you will need to enter enough large number tasks.

    Open the command line using the combination Win + R – cmd. Enter the following tasks using Enter:

    1. Diskpart. This command allows you to manage objects via the command line.
    2. List disk. After entering this command, a list of disks will appear in front of you. Determine which one is your flash drive. As a rule, it is located after hard drives. In addition, you can recognize it by its memory size.
    3. Select disk #. Instead of #, write the number under which the flash drive is listed.
    4. Clean. Deletes all information from the selected media.
    5. Create partition primary. Creates a primary partition.
    6. Select partition 1. Select the created partition for further work with it.
    7. Active. Enabling a section.
    8. Format fs=NTFS . This command will format the flash drive on the required system.
    9. Assign. Will be created new disk. If necessary, you can assign a letter to it by adding letter=N.
    10. Exit.
    11. Next, simply transfer the OS files to removable media and you can get to work.

    This method is only complicated a large number commands You may have noticed that the process of formatting a flash drive is included in the description of the steps. If you have done this beforehand, simply omit these items.

    Please note that the files you transfer to the flash drive must be unpacked. The program will not work if you just transfer the .iso file.

    Ultra ISO

    The utility is designed for developing and editing disk images. Making a bootable Windows 7 ultraiso USB flash drive is quite simple. To do this, you just need to download and install the program. You can purchase the full certified version or use the free trial mode.

    Install the program on your PC using the Installation Wizard. Run the application as an administrator by clicking Trial period. Next, follow this algorithm:


    Windows 7 USB/DVD Download Tool

    This application is located in public access and works on the ultraiso principle. It is offered by the official Microsoft developer.

    Go to the Start menu and launch the program. Find the image of the software you need. Click Browse, select a file and click Next.

    A window will appear asking you about your preferred media - flash card or disk. Select USB Device.

    Click Begin copying. If a pop-up window appears, select Erase USB Device – Yes.

    When the process is completed, the flash drive can be used.

    UNetBootin

    The advantage of this program is that you can simply download and run it. No installation required. Creating a USB flash drive with Windows 7 takes place in one step.

    There comes a time for every PC user when they need to reinstall Windows. But here's the problem. Disk drive is broken or is not in the device at all. What to do then, there is only one way out - create a bootable USB flash drive. How to make a bootable Windows USB flash drive, learn about it by reading this article.

    Preparation

    Before you create a bootable USB flash drive with Windows, you need to prepare. You need to have with you:

    • flash drive with sufficient memory;
    • Windows 7 ISO image;
    • ISO image burning program.

    The operating system required for reinstallation can be downloaded from the official Microsoft website. This can be done by paying a certain amount or by entering a special code that comes complete with a licensed bootloader. Windows disk. However, not every user can afford to purchase an operating system. In this case, the ISO image can be downloaded without special problems find in the open spaces World Wide Web. However, you should be careful. Attackers can insert various malware. Therefore, you need to download the image only from trusted resources.

    It is also worth noting that the storage device will be completely formatted when recording the image. If there is any valuable data on it, then it is worth recording it on a separate disk or any other storage medium.

    Creating a bootable USB flash drive

    Making a bootable USB flash drive is very simple. Anyone can cope with this simple task if you follow certain instructions. There are at least 4 ways to install Windows 7 from a flash drive. They differ from each other in the software that is used to install Windows on a flash drive.

    Windows 7 USB/DVD Download Tool

    To create bootable usb drive, you can use the official tool from Microsoft. The program can be downloaded directly from the Microsoft website. To create a bootable USB flash drive with Windows 7, you must follow the following instructions:

    When the image copying process is complete, you will have a bootable USB flash drive with Windows 7 ISO at your disposal. Now you can install Windows 7 on your PC.

    Ultra ISO

    There is another way to make a USB flash drive with Windows. This method implies the presence of a program called Ultra ISO. Ultra ISO- paid software to interact with images. You can download a 30-day trial version. The program has quite extensive functionality. With its help you can record, edit, convert images, etc. But it is the recording function that interests us. You can burn a Windows 7 image to a USB flash drive using the following instructions:


    As you can understand, the process of creating a bootable USB flash drive through Ultra ISO does not require any specialized knowledge. A bootable Windows XP USB flash drive can be made in the same way.

    WinSetupFromUSB

    To create a bootable Windows USB flash drive, you can use WinSetupFromUSB. The program has several functions for working with images. Nevertheless, we are interested in creating a bootable flash drive. The program consists of only one window and is quite simple to use. To create a flash drive, you need to do the following:

    Now the Windows 7 bootable USB flash drive is ready and can be used.

    Windows command line

    You can create a bootable Windows USB flash drive using Command line OS. Creating a bootable flash drive this way is a little more complicated. However, you won't have to download any additional programs.


    After preparation, you need to record it on the device installation files OS by simply unpacking the image downloaded from the Internet. And thus, you will have at your disposal a flash drive with Windows recorded.

    Conclusion

    This article examined the question of how to create a bootable Windows 7 USB flash drive to reinstall this OS. To solve this problem, you can use one of the four methods proposed above. Each user has the right to choose any of them based on their preferences or capabilities. To obtain the desired result, you must follow the instructions given above for the chosen method.

    Video on the topic

    Once again, when installing and reinstalling the system, many are faced with the question: “How to create installation flash drive with Windows 7? Today this topic is very relevant, since many laptop models are not equipped with a DVD drive, and netbooks do not have them at all.

    We'll start by preparing the flash drive itself. During the recording process, it will be formatted, so care must be taken to transfer the existing data to a safe place. The minimum size of a flash drive is 4 GB. Next important point– find out if it supports motherboard installed on your computer, loading the operating system from a flash drive. If positive, you will need to change BIOS settings, setting the appropriate download priority.

    Please note: if your netbook, computer or laptop is equipped USB ports 2.0 and USB 3.0, use to connect a flash drive USB port 2.0. Otherwise Windows installation 7 will fail. Windows 7 does not provide USB support 3.0.

    Bootable and installation USB flash drive with Windows 7 using the UnetBootin program

    Download UnetBootin; working with the program does not require installation. To start, select Download for Windows.

    In the window that opens, check the ISO image option and select the media.

    After the image is found, click open.

    We check if everything indicated is correct, click “OK”.

    The process of downloading, extracting and copying files will take some time.

    Bootable USB flash drive is ready!

    Creating a boot-installation flash drive using UltraISO

    UltraISO is not free, but you can use it trial period– Free Trial.

    Download the program, selecting the Russian language, launch it as an administrator and select a trial period.

    After starting the program we will see the following picture.

    In the taskbar menu, select “File” → “Open”. Specify the path of the iso image.

    After the image is found, click “Open”.

    On at this stage insert the flash drive into the computer. In the taskbar, select the “Startup” menu, → “Burn image of a tough disk."

    Before recording the image, you need to format the flash drive.

    Select the file system type.

    Once the formatting process is completed, click “Burn”.

    We are waiting for the recording to finish.


    Burning Windows 7 OS to a flash drive is complete!

    Creating a bootable USB flash drive using WinSetupFromUSB

    The WinSetupFromUSB program can be downloaded from the manufacturer’s official website. Select WinSetupFromUSB-1-3.exe.

    Extract the program files to a folder. If you are going to install 64-bit Windows 7, run the WinSetupFromUSB_1-3_x64.exe file.

    In the program window that opens, the first column already contains the name of our connected flash drive. You must check the Vista/7/8/Server 2008/2012 based ISO box. By clicking on the ellipsis on the right side, we open the Explorer window.

    Specify the path to the ISO image and click “Open”.

    After clicking the “GO” button, the process of creating a bootable USB flash drive will start.

    The process completed successfully.

    Creating a bootable USB flash drive using Rufus

    Download latest version programs.


    This program works without installation, just run it. In the window that opens, in the “Device” column, select the letter of our flash drive. The choice of system interface partition scheme depends on your BIOS version. Most often, for a regular BIOS, the item “MBR for computers with BIOS or UEFI” is used. The second and third points are intended for installing a system with a UEFI BIOS with transformation of hard disk in GPT.

    In the case of creating a regular bootable flash drive, not UEFI, a file one is used NTFS system. The cluster size remains unchanged. To select ISO Windows image 7 click on the DVD ROM icon.

    Read more: