• Quickly turn on your Windows 10 computer

    Many of the things we associated Windows with are slowly disappearing over the years as technology advances and we form new habits to adapt. For example, I remember the days when to download to safe mode I just had to press F8 repeatedly.

    It was such a little secret - something like a life hack that you could teach a friend at the right time over the phone. Those days are long gone, however, even if entering Safe Mode has become more confusing, it is also a hallmark of progress in the Windows boot sequence.

    Windows 10 Safe Mode

    In Safe Mode, Windows automatically excludes some programs and drivers that are not necessary for Windows to load and function properly. And he takes only what is necessary in minimal quantities. This way, the download process will be fast and safe.

    In Windows 10, booting your computer into Safe Mode is slightly different from previous versions Windows. Starting with versions 8 and 8.1, Microsoft changed the way everyone used to get into safe mode.

    If previously we simply used the F8 keys or the Shift + F8 combination to enter Safe Mode, then in Windows 10 these old methods rarely work. But this does not mean that you do not have another way to enter Safe Mode in Windows 10. In this post, I will show you 4 ways to boot your Windows 10 computer into Safe Mode. Let's take a look.

    #1 F8 or F8 + Shift

    IN in this case, most old method is not the best. Pressing F8 or F8 + Shift repeatedly during boot can bring back memories of your first Windows 95 or XP. But the truth is that these key combinations will rarely work in Windows 10.

    Since Windows 8, Microsoft has been able to significantly reduce boot times and therefore a large percentage modern computers too fast to register these keystrokes. Even if the method is still technically supported by the operating system, the system simply cannot react fast enough.

    Of course, first of all you should try to use this very easy way. If everything went well, you will be directed to the Menu additional options boot, where you can select and launch safe mode.

    Note: You must press the key quickly enough until the boot logo appears. The boot logo will look like a picture, which may be different for each user, depending on the equipment manufacturer.

    #2 Special download options

    The Custom Boot Options menu was introduced in Windows 8.1 and it provides a wide range of options for users who have problems with their computer. It also gave access to additional boot options, which is what we needed. Below are several ways to access the menu with special boot options:

    • One of the easiest ways to boot into a menu with special boot options is a combination of Shift and the reboot button. To do this, press the button Shift and press reset button. This can be done in Start Menu, V login menu And other places, where there is a reboot button.
    • Another way is to connect recovery disk. Immediately after connecting the drive, start the system. You will be asked to select a keyboard layout, after which you will be taken to a menu with specific boot options. Creating a recovery disk is very easy. Simply type "recovery drive" into the search field, plug in the flash drive, and follow the onscreen instructions.
    • Finally, you can boot into a menu with special boot options, via Settings > Update & Security > Recovery. There, click the "Restart Now" button under the chapter Special options download and your computer will restart.

    All three of these methods will take you to the same menu. There select Diagnostics > Advanced Options > Boot Options. Then click the reboot button, after which various download options will appear on the screen. Press F4, F5 or F6 to load one of the available Safe Mode options.

    #3 System configuration

    The System Configuration menu provides the most quick method, at least when you're already on Windows. Open the search field, enter msconfig.exe and press Enter. Then, in the tab, check the “Safe Mode” box. If you want to enter Safe Mode with advanced options, select the option Another shell, not minimal. Click OK and you will be prompted to reboot the system immediately.

    If you need to do something before rebooting, then simply select the “Exit without rebooting” option and you can restart your PC after.

    #4 Startup abort

    The last method is a little harsh, but necessary in some cases. For example, if you cannot boot into the desktop, then of all the options that I described above, only one is guaranteed to work on Windows 10 - the recovery disk. Pressing F8 or F8 + Shift simply won't work on most modern computers, and unless you have a recovery disk, there seems to be no way to get into Safe Mode.

    If this is your situation, then I want to reassure you that you can still get into safe mode. Do you remember that your computer crashed repeatedly and then displayed a message notifying you that Windows work was completed incorrectly, or the launch was interrupted (like the screenshot below)?

    You can do the same with your computer. Just start your computer and abort the startup before or during the appearance Windows logo. Do this three times and then allow your PC to start normally. Instead of booting to the desktop, your PC will ask you how to start the system, and Safe Mode will be among the available options.

    Many users are afraid to use to speed up their work. operating system optimization programs whose operating principle is unknown. Therefore, to improve OS performance, we recommend using built-in tools. Among them it is worth highlighting the fast Windows startup 10. This function allows you to speed up the loading of the initial window several times.

    How to enable Fast Start in Windows 10?

    To enable fast boot OS Windows 10, you should follow these steps:

    • Click “Start”, “Control Panel”. Set the viewing mode to “Large icons” and select the “Power Options” section.
    • In the left menu, select “Power button actions”.

    • In the next window, you need to click on the “Change settings that are currently unavailable” button.

    • In the new window, lower the scroll slider down and in the “Shutdown Options” check the box “Enable fast startup (recommended).”

    • Save the changes.

    IMPORTANT! If there is no “Quick Startup” item in the “Control Panel” section or you cannot enable it, this means that hibernation mode is disabled in the OS. It needs to be turned on. To do this, enter the command “powercfg /hibernate on” in the command line with administrator rights. Only after this the required item will appear.

    How to disable fast startup of the operating system in Windows 10?

    If you are satisfied with the boot speed of your operating system or this function causes errors, interferes normal operation some applications, you should disable it. There are several ways to do this.

    Method No. 1

    • We perform all the same actions as when turning it on quick start. Uncheck the desired item.

    • Click “Save changes”.

    Method No. 2

    • Press “Win+R” and enter “regedit”.

    • Go to the branch “HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager\Power” and find the “HiberbootEnabled” parameter. Its value must be "0" for the fast boot feature to be disabled. To enable it, set the parameter to “1”.

    After this, we restart the computer.

    The quick launch of Windows 10 is one of its features, so popular among users of old computers and netbooks. In this article, we will get acquainted with this technology, its intricacies and learn how to disable and activate it if necessary. Note that fast startup is only relevant when the computer is turned on after shutdown, and does not work if the system is rebooted.

    In general, the specifics of quickly starting a computer are not much different from the technology known with Windows XP for putting the PC into hibernation mode: when the user or any program sends a shutdown command Windows kernel 10, that is, the drivers and services necessary for its operation, is written to the hiberfil.sys file (hibernation file).

    During control transfer from UEFI to the operating system boot loader, it reads the contents of hiberfil.sys and places it in RAM. after which the download occurs custom applications and drivers peripheral devices. In general, an analogue of hibernation, but without saving the working state of the system.

    There are often situations when a video card driver (or other peripheral device drivers) refuses to work correctly or does not load at all when Windows 10 fast startup is enabled. For these cases you will need to disable this mode start of the operating system, as described below.

    1. Disabling the option occurs through the Control Panel, so we launch it.

    2. Switch the way of visualizing its icons to “Icons” and call the “Power Options” applet.

    4. In the next interface, click on the inscription “Change parameters that are not available.”

    Performing this action requires administrator privileges.

    5. Uncheck the box next to the “Enable fast startup” option.

    Everything is ready. Next times Windows 10 will start in classic mode with loading all necessary files from the place where they are physically stored on the HDD, and not from the hiberfile.sys file.

    Here you can also disable hibernation if the function is not needed or several GB are needed disk space.

    Through the registry editor, fast startup is deactivated by setting the value “0” to the “HiberbootEnabled” key, located at HKLM\SYSTEM\CurrentControlSet\Control\Session Manager\Power. When the value is “one,” the function is turned back on.

    Enable fast system startup

    One of the methods for reactivating the Windows 10 quick start option is described at the end of the last section. The second way is to use the Power Options applet (check the box next to the appropriate option), however in some cases the item may be inactive (grayed out).

    This means that hibernation is disabled in the system, without which the launch will not work due to the absence of the hubernate.sys file. Hibernation is enabled via Power Options (see previous section) or by executing the command “powercfg -h on” in a command line running with administrator privileges. After activating hibernation, the “Enable fast startup” item will become active, so call up the Power Options applet, go to the section for specifying actions for the power buttons, and in the subsection not available in at the moment parameters, check the “Enable fast startup” option and save the new settings.

    The next time you start the PC, it will boot by placing the contents of the hibernation file into RAM.

    In today's article we'll look at how to log into a secure Windows mode 10, if the laptop/computer is working properly or the operating system does not start for any reason. The point is that usual way Calling up a window to select the operating system startup option is no longer relevant. It has been replaced by several methods that allow you to turn on your PC in safe mode.

    Windows 10 Safe Mode, called Safe Mode, is a diagnostic boot mode of the operating system designed to find and solve many problems in the operating system in order to return it to a working state. This mode is used in cases where the computer refuses to start in normal mode, from the last known good configuration, or it is impossible to perform any action due to the use of target files and drivers of Windows 10 itself.

    When the PC boots into Safe Mode, only the components necessary for the launch and operation of the operating system, such as drivers, system services, Explorer, and the OS kernel, are placed in RAM. Applied software and drivers for peripheral devices that are not needed for computer operation are not loaded.

    Safe mode is useful for removing viruses, correcting errors with drivers that have arisen due to their imperfections or incomplete compatibility, eliminating the cause blue screens and freezes, uninstalling programs, system recovery, activating an administrator account, etc.

    The option to boot the computer into, familiar from the 7, safe mode- use of the utility for system configuration.

    1. Launch command interpreter, represented by a dialog box called “Run”, which is launched via “Win ​​+ R”.

    2. Enter system command“msconfig”, which launches a utility to configure the launch of Windows 10.

    By the way, the command can be run through the search engine Windows line 10.

    3. In the window that appears, activate the second “Boot” tab and select the operating system that should be launched in diagnostic mode.

    4. Check the box below the form with the list of OSes for the “Safe Mode” option.

    • “Minimal” - classic safe mode with a minimum of system components and Windows Explorer;
    • “Another shell” is the new name for the configuration, which was called “Command Line Support”;
    • "Network" - with launch network drivers in order to use the network connection.

    6. Click “Apply” to confirm your intentions and click “OK” to close the window.

    7. Using the Start menu or other convenient option turn off the computer and reboot it.

    8. After we launch the system configuration window, and on the “Boot” tab, uncheck the previously checked box in order to return the computer startup to normal mode.

    Special launch options

    Another method that allows you to start Windows 10 in safe mode if it starts. As in the previous version, all actions consist of performing simple operations.

    1. Open the “Options” window using search bar, the combination “Win+R” or the “Start” button.

    2. Click on the title of the “Update, Security” section, where we go to the “Recovery” subsection.

    3. Find the item “Special options...” and click on the “Restart now” button.

    4. After the equipment self-test, a screen of additional computer startup options will appear, where we select the “Diagnostics” option.

    5. Then click on “ Additional options", "Boot options" and click "Restart".

    6. In the launch options menu, select desired mode start the computer using the F4 - F6 keys.

    In order to launch “Special options” in the case when the “ten” does not load, but the lock screen is displayed, while holding down the “Shift” button, select the “Restart” option after clicking on the button to turn off the computer.

    Using the boot device to invoke safe mode

    Don't know how to enable safe mode on Windows 10 when it won't start at all? Read the current section to the end.

    The only thing you need to run the “tens” in diagnostic mode is bootable media with operating system installation files. An OS recovery disk is also suitable, but it is available to a limited number of users.

    1. Start with bootable flash drive using Boot Menu your BIOS.

    2. Press the “Shift+F10” keys to launch the command line or click on “System Restore” in the window with the “Install” button, where we call “Diagnostics”, go to additional options, call the command line.

    3. Using the command line, run the command: “bcdedit /set (default) safeboot minimal” to launch the classic debugging mode, and then replacing “minimal” with “network”, we boot into diagnostic mode with the launch of network drivers.

    4. Close the command line window and reboot.

    5. After solving the problems, reboot the OS, launch the command line as before, and enter and execute: “bcdedit /deletevalue (default) safeboot” to disable safe mode.

    Last method

    This method will display a window where you can select one of the advanced Safe Mode options. Moreover, it is applicable to any operating system installed on a PC.

    • Call the command line by booting from the installation flash drive.
    • Enter a long command: “bcdedit /set (globalsettings) advancedoptions true”.
    • After a notification appears about its successful completion, reboot, closing the command line.

    After the computer restarts, a window will appear with a list of advanced OS boot options.

    Next, to deactivate this method of turning on the computer, you need to run: bcdedit /deletevalue (globalsettings) advancedoptions. The command is entered into the command line, called with administrator privileges.

    We return the menu called by the “F8” key

    If you want to know how to enter Windows 10 safe mode using the classic method - the “F8” key, read the lines below.

    Returning the call to the window with a list of computer startup methods is carried out by editing the “tens” launch configuration file.

    1. Launch the command row with the privileges of an administrator account.

    2. Execute “bcdedit /deletevalue (current) bootmenupolicy”.

    3. After the text “Operation Complete” appears, restart the computer.

    4. After self-testing the hardware shell, press “F8” until we see the familiar window with an expanded list of options for launching “dozens”.

    To cancel calling the extended list of PC startup options, use the command “bcdedit /set (current) bootmenupolicy standard”.

    Choose an acceptable option and fix errors in the functioning of Windows 10 without having to reinstall it.

    Many users who once worked with Windows XP remember that in this version of the system, compared to earlier modifications, quite a lot of innovations were introduced. One of these was the ability to create a quick launch panel for selected user programs. A hibernation mode was also provided instead of sleep. Then some innovations disappeared. Further consideration is given to questions related to fast startup in Windows 10 in general, and how to turn it on or off (in several options). But let's start with understanding the processes themselves related to a quick start. There may be only two of them. And that’s exactly what we’ll be talking about.

    Quick start What is it?

    Basically, today most users working with computer systems under tenth control Windows versions, by fast startup we mean exclusively exiting hibernation mode. Clearly misleading! The fact is that the “top ten” also returned the ability to activate the program quick start panel, which was absent in the system versions between XP and 10.

    But what is fast startup in Windows 10 specifically in relation to hibernation? Without going into technical terms, these processes can be characterized as follows. When the computer is immersed in this mode, program data and the system kernel are written to special file hiberfil.sys. When exiting this mode, the contents of this file is immediately transferred to RAM, which allows the system to “come to its senses” much faster than when using sleep, and all applications (and the system itself) are in the working state in which they were at the time hibernation was activated.

    Why might I need to disable Quick Start mode?

    But why, then, in some cases may it be necessary to disable Windows 10 fast startup, if this mode has seemingly such undeniable advantages?

    The point here is that when exiting hibernation, some drivers (most often control software graphics adapters) may not work correctly and cause conflicts at the system level, causing the entire system to freeze. Sometimes this happens immediately after exiting, sometimes after a short period of time. It would seem that you can simply reinstall or update the driver package, and the problem will disappear. However, as practice shows, Windows 10 is such that such actions do not always help. In addition, when accelerated start is deactivated, the difference in the time required to “bring the system to life” increases quite insignificantly, and the user practically does not feel it.

    For that matter, standard means It is better not to use driver updates, but to install automated programs like Driver Booster. Perhaps this will give the desired result (absolutely all system drivers that require such procedures will be updated or reinstalled, without much user participation in the installation or update process).

    Deactivating Quick Launch

    Now directly on how to disable fast startup in Windows 10. To do this, use the power section located in the “Control Panel” (the view must be switched to displaying icons, and the panel itself must be called with the control command in the “Run” console). On laptops, access to these settings is much faster using the menu by right-clicking on the battery icon in the system tray.

    In the options window, you first need to use the item for setting up the power buttons, and then in the new window, click on the hyperlink for setting up parameters that are not currently available.

    After that, in the shutdown options section, you just need to uncheck the Quick Launch line and save the changes.

    If hibernation mode is never used, it can be disabled completely by running the command powercfg -h off in command console. In addition to deactivating hibernation, the hiberfil.sys file will be removed from hard drive freeing up a significant amount of disk space. After this, in the power section, it is advisable to check the sleep mode options so that when the battery charge is critical (for laptops), the hibernation option is not set.

    Enabling Quick Start

    You can enable Windows 10 fast startup, as is already clear, in the same section by running reverse action. However, sometimes when entering the appropriate settings, the option may not be available (there is simply no such item there).

    In this situation, the reason can be called the disabled hibernation mode (disabling it was described above). Here you will have to use it again command line and enter the above command in it, replacing “off” with the parameter “on” (without quotes), or run the command powercfg /hibernate on, after which the option will appear in the settings of the current power supply scheme.

    Actions with the registry

    In principle, Windows 10 fast startup can be turned on or off by setting key values system registry, the editor of which is called through the “Run” menu with the regedit command.

    Here you need to go through the HKLM branch, and then through the SYSTEM directory and control sections find the Power folder, which is located in the Session Manager directory. On the right there is a parameter HiberbootEnabled. A parameter value set to zero corresponds to disabled fast loading, unit - included.

    Quick Launch Bar in Windows 10: Activation

    Finally, let's see how to activate the corresponding panel, designed to quickly launch programs selected by the user.

    First of all, through RMB on a free area of ​​the “Taskbar”, select the panel section from the menu, and then use the creation of a new panel. Next you will be asked to select a quick start folder.

    In the folder name field you need to enter the abbreviation shell:Quick Launch and press the select button. After this, the corresponding panel will appear on the right side of the “Taskbar” after the separator. In the RMB menu on the created panel, you need to deactivate the item to pin it and uncheck the boxes for displaying the button for viewing tasks, searching and signatures.

    Setting up the panel

    Now you can quickly launch programs in Windows 10 from the panel by dragging application icons onto the panel, similar to how program shortcuts are added to the standard “Taskbar”. You can also add shortcuts to the created folder (usually located in the My Documents directory by default). After making all the necessary settings, the panel can be fixed if you no longer need to move it or replace the elements present in it. How advisable its use is, everyone decides for himself. By and large, it is created complete analogue the usual “Taskbar”, only with a different location.

    Instead of a total

    To summarize, we can only note the fact that deactivating fast startup is required only if the system has problems with freezing when exiting hibernation mode. There is no fundamental difference in the time of “waking up”. The user simply will not feel it. Increasing space by deleting the file responsible for saving settings can also be attributed to controversial issues. As for activating quick launch of programs when creating additional panel accelerated start, there is no particular point here either. It may be required only in cases where all the application icons on the “Taskbar” do not fit, and in quick start will be hidden. Saving space is the only plus. So, the user must decide for himself whether to activate this panel or not.

    Read more: