• The sensor on the iPhone is partially not working. Touch Screen not working on iPhone? We'll tell you how to fix it

    What can you do if the sensor on your iPhone 5s doesn’t work well after replacing the screen?

    If touch iPhone screen works intermittently or does not respond to touch at all - this is one of the most unpleasant and complex problems, which only smartphone owners can encounter. This is due to the fact that working with iPhone and other Apple devices It is completely touch-based and is the primary way of interaction between the user and any type of apps installed on the smartphone.

    Apple has taken note of the increasing incidence of sensor malfunctions in its products and this happens much less frequently in new models. However, the problem has not disappeared completely. Some users, quite a short time after purchase, notice that the sensor responds with a long delay or does not respond to touch at all. In most cases, these problems arise from the LCD screen, but in some cases, simply rebooting the device or cleaning the connectors will help resolve the situation.

    Possible causes of sensor malfunctions

    If the sensor on your iPhone 5s doesn't work well after replacing the screen, it's worth figuring out what caused this problem.

    Causes of sensor failure:

    • Too many programs and applications are running at the same time, which causes problems with RAM devices, which in turn slows down the sensor;
    • Liquid getting on the phone;
    • Accumulation of debris and dirt on the screen;
    • Dry soldering of touch screen connectors;
    • Malfunction of the primary or secondary touch screen control system;
    • The touch screen has received physical damage.

    Ways to solve the problem:

    1. No need to worry if touch screen your smartphone is not working properly. This problem, like any other, has a solution.
    2. First of all, you can try to remove the screen protector of your device, as this could be the obstacle.

    If this does not help, you can try the following logical steps:

    • Reboot your iPhone. If the sensor problem was caused by your phone's memory being overloaded as a result of too many running applications, then the simplest solution to the problem is to reboot the device. To restart your iPhone 5s, simply press and hold the sleep/power button, which is located at the top of your smartphone.
    • Reset. If a simple reboot doesn't help, you'll need to reset your iPhone. To do this, press and hold the Sleep/Power button and the Home button simultaneously until the Apple logo appears. Release both buttons. The phone will turn on and should work. No data will be lost.

    It's rare for an iPhone's touchscreen to stop working or respond to touch. Obviously, if this does happen to your device, you will touch the screen, but nothing will happen, when you try to perform the “swipe” action, nothing will happen either, or the device will not respond to taps and other actions. If the phone screen stops working, it stops responding to touches, this will annoy you.

    If your iPhone's touch screen has stopped working, read below useful instructions on how to troubleshoot and help resolve this problem. There are several reasons why screen problems occur, sometimes they are related to software problems, dirt on the screen or damage to the touch screen or the iPhone itself, but there may be other reasons as well. Read on to find out more.

    Troubleshooting frozen touch screeniPhone

    There are several steps to troubleshoot touch screen not working on iPhone 8, if your iPhone is not responding to touches and screen then follow the steps to fix the problem. I had a similar problem on my device and I used these steps to fix it, in my situation it was just a matter of rebooting my iPhone and freeing up memory for the touch screen to work.

    1. Clean the screen and wash your hands

    First, you'll need to wipe down your iPhone's screen and wash your hands (or clean your other input device). If you have a case or other screen protector, remove it as it may be the reason your screen is not working.

    Look at the device underneath good lighting and tilt it in different sides to make sure there are no stains, oil, liquid, moisture, crumbs or anything else that could interfere with the screen's operation. In sunny weather, sunscreen that may get on the screen can cause the screen to not work or work properly. Make sure your iPhone screen is clean, clearing it of anything that might be interfering with its operation. Wipe it with a soft cloth to remove everything from the screen, you may need a slightly damp cloth (just a slightly damp cloth is enough) to wipe the screen.

    When it comes to your hands, stylus, or other input devices, make sure they are dry and clean. Wash your hands if you are unsure if they are clean enough. Dry skin or calluses are not typically the reasons why your screen won't respond to your touch, but touching the screen with wet hands can cause it to become unresponsive. Just make sure the screen is clean and your hands are clean and dry.

    2. Perform a system-wide reboot

    It's easy to do a hard reset, but it all depends on your device model:

    • To force restart iPhone 7 and later without pressing the Home button: Press and hold the Volume Down button and the Power button until you see the  Apple logo
    • To force restart iPhone 6s and later by pressing the Home button: Hold the Home button and the Power button until you see the  Apple logo on the screen.

    When the iPhone turns on, the touchscreen should work again if the problem was due to a simple error or freezing software iOS or apps.

    From personal experience I can say that the screen of my iPhone 7 Plus can sometimes stop responding to touches and full reboot always helps.

    3. Uninstall or update/reinstall the problematic application

    Sometimes the iPhone touch screen does not respond only in specific application. If this happens to you, then most likely the problem is in the application itself, and not in the screen, but when you open the application, the screen stops responding because the application freezes. A frozen app won't respond to any touches, but pressing the Home button will exit the app and return you to the home screen.

    If the touch screen is not working on an app, try updating it. Open the application and check the updates available for it, if an update is available, install it.

    If the screen still doesn't work after updating the app, the best solution will uninstall the application and reinstall it. Run the application again to make sure everything works. If the problem persists, it is obvious that there is a bug in the application that should be reported to the developers. If the touch screen does not work only when you launch one application, but otherwise works fine, then it is obvious that the problem is in the application, and there is no need to take any action on the screen itself or the iPhone.

    4. Free up memoryiOS

    When an iPhone runs out of memory, it tends to crash and therefore the touch screen may freeze.

    Make sure your device has free memory. You can check this by going to Settings > General > Storage & iCloud > Storage. The main thing is to have at least a few hundred MB; iOS begins to work less efficiently if there is little free memory on it.

    Uninstalling apps you don't use is the easiest way to free up memory.

    I noticed that indeed in the new iOS versions, if the storage is full, many applications stop responding and the screen does not work. Sometimes even Home button may not respond for a while on an iPhone with full memory until you delete apps or clear the cache. This is easy to check. Just fill your memory completely and then try to use the application that is consuming large number memory, such as Instagram, Twitter, Facebook, Spotify, and so on, when this app fills up the cache, you will notice that the screen will become unresponsive for a while as iOS tries to cope with the lack of memory in the storage. In this case, simply free up some space and reboot your device, after which it should start working again.

    5. Broken touch screen? Damaged or droppediPhone?

    In such a situation, it is obvious from the very beginning that if the touch screen is cracked, there may be problems with its functioning, or the screen may stop working altogether. Also, if your iPhone is damaged, the screen may stop working completely or work inconsistently.

    In case the iPhone got wet, the touch screen could break and the entire phone could also break.

    If your iPhone has been wet, it is possible that internal components could have become loose, which caused the screen to fail to work.

    If your iPhone has visual damage and your iPhone screen is not working, the most likely cause is damage to your phone. The solution in this situation would be to take the phone to an Apple service center or an Apple store.

    6. Touch screeniPhone still not working? It's time to take serious action

    If your iPhone screen still doesn't work, you can try backup and recovery via iTunes. Just don't forget to do it first backup copy iPhone files in iCloud or in advance in iTunes. If you contact the official technical support, the staff will most likely restore your device. Since it is part of their job to eliminate any malfunctions.

    If your iPhone isn't responding because it's stuck on Apple logo, this is a completely different issue that is not related to the touch screen, on all devices you can fix this by restoring the device or using DFU mode recovery.

    Touch screeniPhone STILL not working? Seek professional help

    If all of the above troubleshooting methods have not solved your problem, then it is time to seek professional help from Apple support, go to an Apple store or visit an official Apple service center. There, your phone will be checked and the reason why the screen is not working will be identified; the device may need to be repaired. There may be a hardware problem or some other problem that you missed.

    Did these tips help you troubleshoot your iPhone? Do you know other ways to solve a similar problem? Tell us about it in the comments.

    Products Apple today it is very popular, as it is one of the most reliable and high-quality. But still, these systems are not ideal and sometimes they begin to fail, which entails repair work.

    There are a lot of breakdowns similar devices, which are initially very difficult to fix on your own. Learn more about how best to perform iPhone repair available on the website service-iphone.kh.ua.

    Main types of faults

    Touch screens on almost any modern gadgets Quite fragile and have a limited lifespan. It should be noted that on iPhone problem This part of the system can manifest itself in several different variations:

    1. The sensor may not respond completely to your touch, regardless of the point of contact.
    2. Job this mechanism slows down or it just freezes, and the image is played back with a delay.
    3. The touch screen responds to touches only at certain points.

    There may be several reasons for this behavior, and identifying them on your own is quite difficult without some experience.

    We carry out repairs

    It should be understood that correcting the performance of the sensor is often quite difficult.

    There are several simple manipulations that can sometimes slightly prolong the performance of this part of the mechanism:

    1. One of the very first operations when the touchscreen freezes is reboot iPhone. This can be done simply by holding the Home button for a certain number of seconds. However, there is no guarantee that this will help.
    2. One more in a simple way is the removal of all types of protective films or glass, as well as special bumper covers that cover part of the monitor. In this case, you should wipe the screen itself clean and then check its functionality.

    If after the above operations your device does not work, then the only option is complete replacement sensor for a new one. It should be understood that it is advisable to buy such parts only as original ones or entrust their repair to an official service center.

    The problem with iPhones is that the manufacturing company almost never produces spare parts for them. In such cases, you will either have to look for a donor or buy a non-original part. But still, try to do this only at verified and certified repair centers.

    And if you want to try to fix the sensor yourself, we recommend watching this video:

    The products of the American company Apple are of high quality. It fully justifies the prices at which the manufacturer offers its devices on the market. However, iPhone owners often encounter problems with the screen not working. Of course, a hail of questions immediately pours in about what to do if the sensor on the iPhone, or, as it is otherwise called, the touchscreen, does not work. Initially, we note that the display may either fail completely or cease to perform its functions partially.

    Reasons

    Most often the reasons are mechanical in nature. It is clear that in this case some object must act on the display. It is not without reason that they say that it is better to purchase one for your device immediately after purchase and install it. If this is not provided, then be sure to stick protective film. Without additional protection, when dropped from a great height, the touchscreen of a fifth-generation iPhone, for example, stops working in 98 percent of cases. However, it is not excluded that the sensor does not work on the iPhone, software reason. That is, a failure within the operating system.

    Manifestations

    What signs clearly indicate that we have problems with the device’s sensor module? Probably, first of all, this should include the lack of response to touch in one or another area of ​​the screen. Secondarily, this also includes a delay on touches, although in fact the response is still present.

    A manifestation of the fact that the sensor on the iPhone does not work can be a complete disregard for all touches and simply refuses to process them. By the way, when problems arise with the touchscreen, this becomes a real source of problems for beginners just getting acquainted with Apple technology. So they start looking if the sensor doesn’t work. Another sign that clearly indicates the need for sensor repair is the random life of the device. That is, it can type a sequence of characters on its own, applications open and close in the same way, and documents scroll through by themselves. A little creepy, if you think about horror films.

    What to do and how to turn off the iPhone if the sensor does not work?

    Let's imagine the following situation. Let's assume that the touchscreen of your device still functions, albeit with a large number errors and inaccuracies. In this case, we can solve this problem quite simply. To do this, we perform a complete reboot of the smartphone. To do this, follow simple instructions. The first step is to press two buttons at once. This is the power button, as well as a key called “To Desktop” or “Home”. They need to be held in this state for about twenty seconds. After this time, the device should begin rebooting. At the end, you will see the corporate logo of the American company, which will notify you that the reboot operation was performed correctly. By the way, this instruction is one of the answers to the question of what if the sensor does not work.

    Check accessories

    There are cases when they interfere with correct operation touch display. For example, if it was pasted incorrectly, it can contribute to this matter. In addition, there are now a huge number of undeniably cool bumpers for smartphones on the market, but not all of them are made well. If the bumper partially covers the display, it may prevent it from working properly. To check whether this is the reason, simply remove it from the device and use the touchscreen again a little. If normal operation will be restored, the problem is really in the bumper, and something will have to be done about it. If nothing has changed at all, then you need to move on and look for the reason for the incorrect functioning.

    The answer to the question of how to restart an iPhone if the sensor does not work is quite simple. To do this, you need to use the appropriate key combination. Well, what to do next if the advice on rebooting the device did not help? What if the sensor continues to work incorrectly, or even does not respond to touches at all? In this case, everything is much more serious, and we are not dealing with a single failure, which, in fact, is just an exception to the rule, but with a technical malfunction.

    In this case, you need to schedule and carry out a visit to the service center as quickly as possible, where specialists will inspect the screen and, if possible, return it to normal life. Don’t be tormented by the question “The sensor on your iPhone doesn’t work, what should I do?” when even a full reboot doesn’t help. Here we are talking about the need to act as quickly as possible so as not to aggravate the situation.

    Why a service center?

    If the sensor on your iPhone 5S or other device from this American company does not work, specialists with relevant experience will always be able to first recognize and identify the cause of the malfunction, and then localize and eradicate it. At the service center you can find out what condition the phone is in. If necessary, specialists will replace the screen on the device for an additional fee.

    How long will it take?

    Most often, replacing the display on an iPhone of any generation takes about one hour. There may be slight variations in both directions, but usually within an hour. One should not think that such a short period of work means their low quality.

    If severe damage occurs

    Screen deformation or even damage motherboard, which occurred as a result of high-intensity mechanical impact, will be the reason why you will need to part with your device for a longer period of time than an hour. Serious problems always require more thorough diagnosis. This is not just a sensor replacement, but a whole set of measures that together make up the single required for further correct operation complex.

    If your sensor stops working, there are various reasons. But most likely the update to iOS 11/12 is causing it. In addition, software failure, iPhone overheating, and display contamination also lead to various breakdowns. The following situations are listed:

    • The sensor stops working after a while
    • The sensor stops working after locking the screen
    • Sensor stops working after 10 seconds
    • The sensor on the phone does not work after a fall
    • The sensor on the phone does not work after water
    • The sensor stops working in the cold

    And when the above occurrences occur, they should be corrected. If, after a fall and water, the screen does not respond or is broken, then you need to change it to a new sensor at the service center, and in advance, avoiding the loss of files. In other cases, system failure or breakdown, it is recommended Tenorshare program ReiBoot will allow you to fix for free the fact that the touch screen does not respond to touches.

    What to do if the sensor does not respond to touch

    Free app is a professional utility, capable of entering and exiting recovery mode. And entering and exiting recovery mode can resolve most freezes.

    1. Download and install Tenorshare ReiBoot, connect your iPhone, iPad and iPod to your computer.

    2. Click "Log in" recovery mode", and enter the device into recovery mode,


    3. Click "Exit Recovery Mode" and exit the device from recovery mode.


    Plus, Tenorshare ReiBoot can fix iOS 11 issues like . If you have an iPhone, you can reset the lock password using Tenorshare ReiBoot.

    How to restart your phone if the sensor does not work

    iPhone 5s sensor stopped working, and then the screen turns black, in this case, how to restart the iPhone? Simple and quick way– force reboot. Press and hold the Power button and the volume down button on the left at the same time for 15-20 seconds, after which the Apple logo will appear on the screen.

    How to revive the sensor on your phone

    1. Launch Tenorshare ReiBoot, after connecting the gadget to the computer, click “Fix Now”.



    3. After downloading, start restoring, and wait a little, the restoration is successful.


    If it was not possible to restore iOS system, then change the download path and try again. If the sensor still does not respond well to touches, contact the service center. The reason may be that something unpleasant happened to the hardware.

    Read more: