• Digital TV set-top boxes DVB T2: what they are and how to choose. What is digital terrestrial broadcasting DVB-T2

    TV), it's time to move on to the most important part - setting digital television . How to set up digital television yourself? Read more about this.

    I will show the example of a receiver Mystery MMP-71DT2, and like me, his software is completely identical to Rolson. If you have a different console, the principle will be the same, but you may have to look at the instructions.

    How to connect everything

    First, let's connect antenna to the receiver, and the receiver to the TV. Preferably through, so the image quality will be as clear as possible. If there is none, then through ordinary “tulips”, they usually come complete with the console. Look at the connectors in the instructions, you will get something like this. If the antenna has an amplifier, first turn it off, then you can always turn it on.

    We launch all this equipment, set-top box, antenna, TV. Select the desired video input. If everything is done correctly, you will see a start menu like this:

    How to set up digital television through “auto search”

    By default, the set-top box is not configured for anything, and you yourself will need to catch the channels that are broadcast in your region. The easiest way is to run an auto search.

    After launching the auto search, the set-top box will think for a long time, and should find something in the end. Important: since each one is transmitted at the same frequency, you will catch channels not one at a time, but in packs of ten at once. So be patient. If in analog TV channels are caught one at a time, then a few minutes may pass, and the set-top box will search. But then all 10-20 channels will pop up immediately.

    After the search is over, the set-top box will prompt you to add the found channels. If you find all 20 pieces, congratulations, the process is complete!

    List of tuned channels, TV Guide function

    How to check signal quality when setting up digital TV

    Check that the signal is strong enough and everything is set up well.

    It's very easy to do. You should have an INFO button on your set-top box; pressing it three times displays data on the quality and intensity of the signal. Look in the instructions, it may be called differently, but it will do the same thing:

    The higher the signal, the better. Optimal - from 60% onwards

    If both indicators are high, above 60%, everything is fine.

    Check on both multiplexes, say, on Channel One and TNT.

    Since different multiplexes are transmitted, you can catch the first one well, and the second one poorly, or vice versa. Your task is to rotate the antenna so that both are caught well.

    But in practice it happens a little differently. For example, you can catch duplicates. When identical channels will occupy several places at once. It doesn't seem critical, but it's annoying. How to treat, I.

    What to do if you caught duplicates or didn’t catch anything

    The second option is when not everything was caught, or nothing was caught. Fine tuning and manual mode will help us here. We read about it. However, if you live in a city and there are towers near you, then in 90% of cases an automatic search is enough for you.

    To sum it up

    As you can see, setting up dvb t2 digital television with your own hands is not a difficult task. And you certainly shouldn’t call a specialist who will do the same thing for you for a thousand rubles)

    A package of channels broadcast on the same frequency is called multiplex. The number of channels in one multiplex can be from 1 to 10. The composition and number of channels is determined by the broadcaster, for example, the state.

    There are now 3 multiplexes operating in Crimea so that they do not interfere with each other, as in analogue broadcasting, in each region broadcasting is carried out on different frequencies (CHANNELS).

    DVB-T2 broadcasting in Russia, Ukraine and a number of other countries is carried out only in the decimeter frequency range - these are from 21 to 69 UHF (UHF) channels.

    List of transmitters and frequency channels broadcasting in Crimea

    Alupka – 21, 30, 43 (Lenin St. 64)

    Alushta – 30, 32, 56 (Sergeeva-Tsensky St. 13)

    Annovka (Belogorsky district) – 22, 32, 41

    Belogorsk – 36, 37, 58 (Nizhnegorskaya St. 33a)

    Dzhankoy – 24, 28, 30 (Kraynyaya St. 20)

    Evpatoria – 23, 29, 32 (Razdolnenskoe highway 17)

    Zavodskoye (Leninsky district) – 27, 26, 30

    Kerch – 24, 41, 43 (Ordzhonikidze 144)

    Kirovskoye (Chernomorsky district) – 21, 24, 40

    Krasnoperekopsk – 24, 31, 43 (Tavricheskaya 105)

    Parthenite – 26, 27, 37

    Sevastopol – 30, 40, 47 (96 Pobeda Avenue)

    Simferopol – 36, 37, 51 (Studencheskaya st. 14)

    Sudak – 32, 49, 60 (Eastern Highway 33)

    Feodosia – 26, 27, 30 (Simferopol highway 45a)

    Foros - 21, 43, 44 (Cape Sarych)

    Yalta – 26, 35, 37 (Yuzhnoberezhnoye Highway 55)

    To receive DVB-T2 you need (preferably) an external decimeter television antenna without an amplifier with modern cable with minimal signal attenuation in it. It is possible to use all-wave antennas. More often the antenna with good cable Receives a signal better than an antenna with an amplifier and an old cable. The use of the Soviet RK-75 cable is not allowed; such a cable was not designed to receive signals in the UHF range, so it has high signal attenuation.

    It also happens that in the same locality, for example, Nikolaevka, Zuya, depending on the place of reception, reception can be carried out from different directions. So, on one side of the lowland in Zuya, the signal can only be received from Simferopol, and on the other side of the settlement only from Belogorsk.

    If reception is carried out outside the line of sight of the direction to the transmitter, then maximum signal possible even in the opposite direction from the transmitter. In this case, the reflected signal is received. To determine the ideal orientation of the receiving antenna, select the manual channel search mode on your TV or set-top box, then enter one of the channels (preferably with a lower number from the list above) from the transmitter from which you want to receive the signal. Now you can see the scale of the received signal level and orient the antenna according to it.
    Rotate the antenna 5-10° in any direction, count to 10 in your head, and record the signal strength. Rotate the antenna another 5-10° in the same direction
    (further) and again count to 10 and record the received signal level. Thus, rotate the antenna a full 360° around its axis.
    After this, you will see from your recordings which direction the maximum signal is coming from.

    With the advent of the era of digital terrestrial television, many subscribers of cable and satellite networks began to increasingly think about connecting free broadcasting. Indeed, according to the Federal Target Program on the development of a digital broadcasting network, in open access will appear more than twenty television channels in excellent quality absolutely free. Which includes mandatory federal television channels.

    The question arises - how to connect digital terrestrial television at home?

    There's nothing complicated about it. To receive digital terrestrial television you will need any standard subscriber equipment DVB-T2/MPEG-4 with mode support Multiple PLP and UHF antenna ( UHF) range. The antenna can be either collective (installed on the house, also called a common antenna) or individual, installed directly in your house or apartment. Depending on the distance to the transmitting center, you must select the desired antenna. They are divided into active (with an amplifier) ​​and passive. When purchasing an antenna, you can first check the power of the transmitting equipment installed in your region and the distance to the transmitting center. Based on the data obtained, select an antenna.

    Approximate coverage radius of transmitting stations:
    10 W– about 3 km;
    50 W– about 5 km;
    100 W– about 15 km;
    500 W– about 25 km;
    1 kW– about 30-35 km;
    2 kW– about 35-40 km;
    5 kW– about 40 – 50 km.

    Let's move directly to the reception equipment. Three main groups can be distinguished: televisions with a built-in DVB-T2 tuner, set-top boxes of the same standard, and digital computer DVB-T2 tuners. Their settings are similar, if not the same.

    Video: how to set up DVB-T2 digital terrestrial television

    It is best to connect a digital terrestrial set-top box according to the manufacturer's instructions; it is practically impossible to make a mistake there. Also, you can look official video from RTRS:

    A few recommendations, also from RTRS:
    connect the antenna cable plug and, if necessary, the digital set-top box to the TV;
    connect auto channel search - the TV will tune to the corresponding digital broadcast channel, when tuning to channel in manual mode it is necessary to indicate the channel frequency (for example, 35 TV channel, 685 MHz);
    Most digital TVs (and set-top boxes) have a built-in signal level and quality indicator, which will allow you to optimally configure your antenna for digital reception air signal(see the operating instructions for the TV).

    On TVs with a built-in DVB-T2 tuner, all manipulations are carried out through the TV menu. There shouldn't be any difficulties there either.

    We recommend updating the software of your subscriber equipment to the most current one. This can be done in specialized services, or yourself (if you are confident in your abilities). The software can usually be downloaded from the manufacturer's official websites.

    Frequencies of DVB-T2 digital channels:

    21st television channel - reception frequency 474 MHz;
    22nd television channel- receiving frequency 482 MHz;
    23rd television channel- reception frequency 490 MHz;
    24th television channel- reception frequency 498 MHz;
    25th television channel- reception frequency 506 MHz;
    26th television channel- reception frequency 514 MHz;
    27th television channel- reception frequency 522 MHz;
    28th television channel- receiving frequency 530 MHz;
    29th television channel- reception frequency 538 MHz;
    30th television channel- receiving frequency 546 MHz;
    31st television channel- reception frequency 554 MHz;
    32nd television channel- reception frequency 562 MHz;
    33rd television channel- reception frequency 570 MHz;
    34th television channel- receiving frequency 578 MHz;
    35th television channel- receiving frequency 586 MHz;
    36th television channel- receiving frequency 594 MHz;
    37th television channel- receiving frequency 602 MHz;
    38th television channel- receiving frequency 610 MHz;
    39th television channel- receiving frequency 618 MHz;
    40th television channel- reception frequency 626 MHz;
    41st television channel- reception frequency 634 MHz;
    42nd television channel- receiving frequency 642 MHz;
    43rd television channel- reception frequency 650 MHz;
    44th television channel- reception frequency 658 MHz;
    45th television channel- receiving frequency 666 MHz;
    46th television channel- reception frequency 674 MHz;
    47th television channel- receiving frequency 682 MHz;
    48th television channel- receiving frequency 690 MHz;
    49th television channel- receiving frequency 698 MHz;
    50th television channel- reception frequency 706 MHz;
    51st television channel- reception frequency 714 MHz;
    52nd television channel- receiving frequency 722 MHz;
    53rd television channel- reception frequency 730 MHz;
    54th television channel- reception frequency 738 MHz;
    55th television channel- reception frequency 746 MHz;
    56th television channel- reception frequency 754 MHz;
    57th television channel- reception frequency 762 MHz;
    58th television channel- reception frequency 770 MHz;
    59th television channel- reception frequency 778 MHz;
    60th television channel- reception frequency 786 MHz;
    61st television channel- reception frequency 794 MHz;
    62nd television channel- receiving frequency 802 MHz;
    63rd television channel- reception frequency 810 MHz;
    64th television channel- reception frequency 818 MHz;
    65th television channel- reception frequency 826 MHz;
    66th television channel- reception frequency 834 MHz;
    67th television channel- reception frequency 842 MHz;
    68th television channel- reception frequency 850 MHz;
    69th television channel- reception frequency 858 MHz.

    Let us clarify that the standard equipment DVB-T is not compatible with the equipment DVB standard-T 2 .
    You can ask questions about broadcasting digital terrestrial television by calling the toll-free number of the RTRS unified information center 8 800 220 2002 .

    Digital terrestrial television channels (DVB-T2 standard)

    Channel One;
    Russia 1;
    Match TV;
    NTV;
    Channel 5;
    Russia-Culture;
    Russia 24;
    Carousel;
    OTR;
    TVC.

    Ren-TV;
    Saved;
    STS;
    Home;
    TV3;
    FRIDAY;
    Star;
    World;
    TNT;
    MuzTV.

    These channels are open and broadcast absolutely free.

    When a new level of data transmission quality appeared, it was launched digital network television DVB-T2. Digital television provides high quality pictures and an excellent transmission signal. But to set up a connection to this network, you need to have the necessary knowledge, select correct receiver and set it up well.

    How to connect the T2 module and configure it will be described below.

    How to connect a T2 set-top box to a TV

    The T2 tuner is quite easy to connect to your TV. If you have experience connecting players, antennas and other devices to your TV, then connecting the receiver will not be difficult.

    We connect the antenna to the receiver, and from it we connect the wires to the TV. This can be done using standard HDMI, tulip or SCART cables. The most important thing is that you don’t have to pay to call a specialist. However, if the master can connect the set-top box to the TV for free, then it’s worth leaving the matter to him.

    How to connect DVB-T2 to a TV without a set-top box

    To connect your TV directly to the DVB-T2 network without purchasing a receiver, you can immediately purchase a TV with a built-in DVB-T2 tuner. This saves space, time and costs. Among other things, you can control T2 channels with one TV remote control, while the receiver will have two remote controls.

    Today, almost all LCD TVs have a built-in tuner, making connection easy. Simply insert the antenna into the desired socket.

    How to set up DVB-T2 using a receiver

    After installing and connecting the receiver, you need to set up the television. To do this, follow simple steps:

    • We go to the console menu.
    • Click “Quick setup”.
    • If the default is another country, then set it to “Russia”.
    • Then you must select the “DVB T2” standard. It often appears in the DVB T/ DVB T2 standard field, which leads to the receiver looking for DVB T quality channels, and only then DVB T2. We need DVB T2 and its excellent quality.
    • Then click “Auto Configuration” and everything will be done automatically.
    • After finding the channels, you can also watch detailed information by connection quality by clicking the “Info” button.

    This way you can set the receiver to receive all the right channels. But the setup does not always go smoothly. Sometimes problems arise.

    What to do if DVB T2 setup does not occur

    There are several options why the setup does not occur:

    • The problem is in the receiver;
    • The problem is in the antenna;
    • The problem is with the TV.

    First, try setting up using a different antenna. If it helps, then the problem is in the antenna, and if not, then the receiver is to blame.

    If the antenna is to blame, then only a specialist can help. If the receiver, then several options are possible. Firstly, the receiver may have wrong firmware. Then you need to reflash the console. To do this, go to the manufacturer’s website, download the new firmware, write it to a flash drive and insert it into the receiver. It will update itself and the problem will be fixed.

    If updating the firmware does not help, then the problem is most likely in the electronics. In this case, it is better to return the set-top box for service or replace it under warranty.

    You can also check the TV itself. To do this, use the set-top box on another TV, and if it works, then the problem may be in the TV settings. In this case, you should contact the manufacturer. There they will be able to tell you how to correctly set the TV settings to connect the receiver.

    How to choose a set-top box for DVB-T2

    The choice among receivers is quite large. Here are the most popular receivers that are recommended to buy:

    • Trimax TR-2012HD
    • Strong SRT-8500
    • Strong SRT-8502
    • Thomson THT702
    • Trimax TR-2012HD PVR (TR-2013HD PVR)

    Their price starts from 1000 rubles and above, depending on the functions. More expensive receivers have more fine-tuning options, better signal reception, more various inputs to connect additional devices, and they also work faster. Compared to satellite set-top boxes, the DVB-T2 receiver is inexpensive.

    You can also go to any hardware store and there, on the spot, choose new receiver, after consulting with a specialist.

    The introduction of terrestrial digital television of the DVB-T2 standard on the territory of Ukraine made it possible to significantly expand the zones confident reception signal from TV towers, compared to analog signal. Also, the ease of setup and installation of T2 did their job; they became much more popular than satellite television with MFA channels.

    Let's move on to the practical side and talk about the direct installation of all the equipment necessary to receive DVB-T2. Many modern televisions are already equipped with an integrated DVB-T2 receiver, in this case it is enough to find out the position of the repeater, point the antenna at it and scan the available channels using the TV. In the case of simple TV, installation and connection of T2 occurs somewhat differently, we will discuss it now. To install T2 in the standard version you will need:

      1. Digital DVB-T2 receiver , the form factor you need, for example for hidden installation with a remote IR sensor, etc. The choice is now huge, there is practically no significant difference, everyone can choose for their needs. Practice shows that it is worth purchasing from a reliable store with a guarantee; we suggest you buy a receiver from our partners who will provide you service, warranty and repair.

        Buy MINI DVB-T2 digital set-top box with delivery from China

    1. UHF antenna , in practice, so-called “Polish antennas” are often used, you can also purchase an antenna manufactured by Konvalia, Margoon, etc., you just have to take into account that the antenna must be taken with a gain margin, since you can predict how the signal will be received in specific case hard to say. It is also desirable that it contains an amplification board that can receive power from both external unit nutrition.
    2. Cable, regular TV , almost any will do, but it’s better to take one with a braid filling percentage of 50% or more.
    3. RCA or HDMI cable for connecting the receiver to the TV , may be included or must be purchased separately.

    Connecting digital T2 using the example of the World-Vision T38 receiver

    First you need to install the antenna, if it has not been installed before. It’s probably stupid to advise anything here, I’ll just say that follow the manufacturer’s recommendations, and at least first turn it in the required direction. You can find out which direction to point the antenna by looking at neighboring antennas or calculate the direction, for example, using Google or Yandex maps.



    Connecting a T2 digital receiver to an antenna will also not cause much difficulty; the manufacturer and standardization make this process simple and it’s quite difficult to make a mistake.


    When connecting, it is difficult to confuse something, the RCA cable is easy to connect, you just need to follow the color on the plug and socket, yellow to yellow, white to white, red to red. The antenna connector also will not allow you to connect other plugs to it; in this receiver model it is located on the left edge. It is also possible to connect via HDMI, everything is simple here, the COAX connector is used to connect a digital audio amplifier and is practically not used in standard configurations.

    After all the cords are in place, we connect the last one - the power supply connector, for this model it is located on the side panel.


    At this point, the connection of the T2 receiver is almost complete. Next, you need to turn on the TV and receiver. By pressing the “AV-TV” switch button on the TV remote control, we switch from the antenna socket to the “tulips”; on newer TVs, we select the input to which the receiver is connected. The following should appear on the screen:




    The receiver will restart and a menu will appear with searching for channels and setting the initial parameters of the receiver:


    We select the parameters and click “Auto search”, the receiver will scan and display the found channels.


    If not all channels are found or there are none at all, adjust the antenna and repeat the search from the receiver menu until the number of channels and reception quality satisfy you. Enjoy watching!

    The federal program provides for digital television coverage of the entire territory of Russia by 2015. Today, many areas of our country can enjoy high-definition television in HD format. But this pleasure is not available to everyone (everyone can watch it, but not everyone sees it))).

    How to find out if there is DVB T2 coverage in your area

    Very simple! To do this, go to the official website federal project, in the section “Network coverage map”. You get interactive map, where you can find your location or the nearest town by entering them in the search bar and selecting from the drop-down tips:

    At first glance, nothing complicated, but there are some nuances here ( did it on my knee and didn’t explain how to use it ) . Let's pay attention to the right one top corner digital TV cards, and let's see what's there.

    By default, the " Broadcasting points"- essentially these are TV towers that broadcast in DVB T2 format, and RTRS-1 TV channel package. This is the first ten information channels digital television. To see if you are in the broadcast zone of a TV tower, check the “Broadcast zones” box, as well as “TVC, frequency”, the map will be painted in cheerful colors:

    “Green” towers are working. Here is the frequency and channel number on which the signal is transmitted

    If your area is colored, and there is a “green” tower nearby, then everything is probably fine. At least you will definitely catch the first ten channels. The frequency of the towers will be useful to you when, so remember it, or better yet, write it down, as well as the number of the channel on which your “digital” broadcasts.

    But that's not all.

    The fact is that the first and second multiplex are transmitted by different towers and at different frequencies.

    This means that, for example, the first ten channels may already be working for you, but the second ten – the tower is still being built and this often happens. It’s easy to check this, go to the “RTRS-2 channel package” tab:

    The second multiplex - as we see, there are much fewer “green” towers

    They will show us the towers again, and most likely, not all of them will be green, as in the first case. Since the first towers were built for the first multiplex, they have already been built a long time ago and are broadcasting the first ten channels. But with the second multiplex it’s worse. However, if there are no “green” towers near you, do not despair, click on the gray ones, there will be information about the stage of construction and approximate commissioning.

    From personal experience I’ll say that my mother’s first multiplex in the region arrives from the tower 10 km away, but the second one comes from the neighboring region, 45 km from her house. True, it is used here outdoor antenna“dryer”, with an amplifier, on a high pole. Naturally, without an amplifier it does not catch anything.

    We receive detailed information on the tower. At least it's already built, which means it's launching soon!

    At times they skip friezes" However, judging by the map, a tower with a second multiplex is being built nearby, so everything will be great soon.

    I hope you have now figured out how to determine the coverage area of ​​digital television, and have learned how to correctly interpret the digital TV map on the official website of the project. It's time to move on to the next step.

    When it comes to buying a new TV, most people pay attention only to quality transmitted image, as well as those technical specifications, on which it depends. The price of the device is also important. But the presence or absence of a digital tuner, as well as its type and quantity, interests few people. Not many people pay attention to this. As a result, when you want to connect and watch DTV for free, problems arise and you have to spend money on buying a DVB-T2 tuner separately.

    Today we will look at what it is digital tuner what it can be and how it works. This will allow you to approach the choice of a new TV more carefully and decide for yourself whether you need such a device, built into the TV or not. Moreover, as already mentioned, a digital tuner can always be purchased separately.

    What is DTV T2

    Before considering the features and types of tuners that exist on TVs today, you need to understand what, in principle, is this device and why it is needed. A digital tuner is a receiver or, as it is also called, a decoder that allows the TV to directly receive signals various types broadcasts and decipher them.

    Many new TV models already have built-in digital receiver T2. In addition, there are sections in which there are two tuners at once - T2 and S2. You can find out what type of device is built into your TV by looking at its technical specifications. If you have a built-in decoder that receives a signal of a different format, then the necessary tuner can always be purchased separately.

    External tuners are very popular today, since not many Russian citizens have the opportunity to spend a large sum of money on buying a new TV, and such a set-top box allows you to expand the capabilities of your existing device. The most popular are T2 format set-top boxes, which allow you to connect and watch, as well as a DVB-S2 set-top box. They buy it if they decide to install a satellite TV antenna, but the TV does not have a decoder of this type.

    Broadcast Standards

    As already mentioned, the tuner built into the TV can receive one or more signals different formats broadcasting. Let's look at the most common options.

    • DVB-T. Such a receiver can receive digital signal television, which transmits a picture more high level quality and clarity. To connect it, you need a regular TV antenna.
    • DVB-T2. This is the second generation of DVB-T decoders, which differs from its predecessor in increased throughput channel, higher signal characteristics and its architecture. In Russia, this DTV signal format is mainly used. It is impossible to receive it through a DVB-T decoder, as these formats are incompatible.
    • DVB-C. A very popular format capable of decoding a digital signal cable television. To start using it, you need to insert your provider card into the appropriate slot.
    • DVB-S. With it you can directly connect satellite dish to your TV.
    • DVB-S2. Like T2, S2 is the second generation DVB-S receivers. S and S2 are also incompatible, so to receive the signal of this type you need a corresponding decoder. Different this format increased channel capacity and the use of new types of modulation.

    When purchasing a TV, you should pay special attention to the labeling. So, you can see the inscription DVB-T2/S2. This means that the TV will be able to receive both terrestrial and satellite digital channels.

    Features of DVB-S2 and DVB-T2

    The built-in digital satellite TV tuner has certain features. In order to watch freely available TV channels, it will not be enough for you to simply connect the satellite dish to the TV directly. You will also need to additionally purchase a CAM module.

    The fact is that without it you will not be able to view encrypted channels, but only those that are fully open. This is due to the fact that the companies producing such TVs do not think much about this. In addition, it will be impossible to change the firmware or enter the code. External ones satellite tuners, sold by us, have firmware in which all the necessary codes are already written.

    The Geneva Convention of 2006 stipulated that the transition to digital broadcasting should take place before 2015, which will entail the shutdown of analogue TV.

    As of 2011, in Ukraine it was built and launched National Network digital television, which covers about 95% of the country's settlements. It is planned to switch off analogue broadcasting in the country by 2015.

    There are three formats for broadcasting terrestrial TV:

    1. DVB-T/MPEG2
    2. DVB-T/MPEG4
    3. DVB-T2/MPEG4

    DVB-T2/MPEG4, the newest broadcast format, was introduced in Ukraine. Digital format Broadcasting has greater noise immunity than analogue. This means that the coverage will be greater, and the signal itself will be available where it was not before, while maintaining picture and sound quality.

    This also entails a reduction in the size of the antenna, all other reception conditions being equal. Receive video excellent quality on indoor antenna? Watch TV high quality in nature or in the car - now it has become a reality!

    With all this, transmitting stations that broadcast digitally have less power than analogue ones. Consequently, they consume less electricity and are more environmentally friendly.

    The system assumes the presence of a basic 32 channels: 28 national + 4 regional and local. Viewing all 32 channels is free. Currently, all channels are broadcast in SD quality (standard), however, the project assumes that 22 channels will be in SD format, the remaining 10 - high resolution HD.

    Preliminary list of HD channels:

    • MTV-Ukraine
    • TONIS
    • Ukraine
    • Cinema
    • Inter
    • Bank-TV
    • Enter music

    Digital broadcasting involves a number of additional features. Along with the old teletext, there is a transmission of various additional information: current program, next program, channel name, current time, subtitles and their language (if available), etc.

    In turn, the tuners themselves are capable of receiving new version software(firmware) centralized, directly from the air.

    From theory to practice

    No matter how attractive DVB-T2 may look, it is not yet fully functional in Ukraine. The fact is that Zeonbud receives signals from television companies in MPEG-2 format with a flow rate of up to 2.5 Mbit/s, and then converts it to MPEG-4.

    Although, this should be considered as a temporary solution, since not all television companies are able to quickly switch to MPEG-4. If Zeonbud limited itself to MPEG-4 only, it would create great difficulties for television companies.

    The digital TV receivers themselves, as well as their market value (~550 UAH), leave much to be desired. Well, let's hope that over time all these nuances will be eliminated.

    The very fact of Ukraine’s transition to digital broadcasting should already make you happy.

    IN next topic we will talk about regional features digital broadcasting in the Transcarpathian region.

    Equipment for digital television is what you can buy in our store. Our company operates in the market of broadcast and satellite equipment since 2003 and we already know most of our clients by sight.
    For regular customers of our online store there is a system of discounts, which are calculated automatically according to the coupon number assigned to you personally.
    All equipment passes pre-sale preparation, namely, it is installed latest version Software for satellite and broadcast consoles. All receivers are tested for functionality.
    Our company delivers equipment both in Moscow and throughout Russia. Most courier delivery companies have agreements on preferential delivery prices.
    In our online store you can find almost any equipment that you may need to receive satellite and terrestrial television. We have tried to make the ordering process convenient for anyone. If you plan to order not one item, but several, then you can use the store search and pay attention to the accompanying equipment. If you want to pick up equipment for receiving satellite TV, then you should go to the tab menu " Satellite TV", if to receive terrestrial or cable TV, then "Terrestrial Television", etc. If during the ordering process you have questions, then you can use online chat, which is located on every page of the online store or order call back.
    We hope that in the online digital TV store you can spend a minimum amount of time ordering the required equipment.

    Read more: