How to strengthen the reception of a wifi antenna. How to strengthen the signal of a Wi-Fi network? Increasing Wi-Fi range

Strengthened wi-fi is necessary to improve the quality of reception and transmission of various data and watching videos over a wireless network. Since the quantity various devices(smartphones, tablets, laptops), the operation of which depends on the availability of Internet access, is increasing every year, then a weak or unstable radio signal worries almost every router owner.

The reasons for the decrease in Internet speed may be interior partitions, load-bearing walls, mirrors, household appliances or other nearby access points to the World Wide Web. There are several ways to solve this problem.

Changing the channel used by the wi-fi router

• select the section “ Wireless mode"("Wireless network" or "Wireless");
• click on “Wireless Settings” and change the value of the “Channel” parameter by selecting a free (or least loaded) channel.

Changing the Router Location

Setting the maximum power value in the router settings

Before using this method of strengthening a Wi-Fi signal, you must study the instructions supplied with the router, since the procedure depends on the model and manufacturer. Most often, to increase the power of a router at home, you should change a parameter such as “signal strength” in the “Settings” (or “Advanced settings”) section by setting the highest value (“100%” or “High”).

Systematic router firmware update

Replacing the standard router antenna with a more powerful one

Installing a wi-fi repeater

Purchasing a router that supports the 5 GHz band

Using the above effective ways, you can significantly increase the speed home internet via Wi-Fi, and you don’t need to purchase expensive gadgets for this. You just need to study the router settings in detail or use additional inexpensive devices.

Every year there are more and more different gadgets that have access to the Internet. Almost every apartment has a laptop, smartphone, tablet or TV, and maybe even a refrigerator with Wi-Fi module. At the same time, users often face the problem that it is not possible to “catch” a connection to the Internet everywhere. The reason for this may be that the distance from the router to the device is too large. The coverage radius of the router is about 30 meters, and sometimes more. However, there are a number of other factors that can affect the signal level.

Interference can be caused by:

There are software and hardware methods that can help solve this problem. The following recommendations will help strengthen Wi-Fi and make Internet use more comfortable.

Software Gain

The most common mistake when using wireless access points is that owners pay too little attention to setting up the network. Often, users set a security key and change the SSID. This is where all the shenanigans end. At the same time, there are still a lot of parameters that remain by default. Setting them up will help increase the coverage area. Let's consider the main methods of programmatic signal amplification.

Video: Boost WiFi signal

Correct location

First of all, you need to pay attention to the location of the router in the apartment. It is recommended to place the router closest to the device from which you access the Internet. If it is difficult to figure out such a place, and the connection is made from different rooms in the house, then it would be best to install the router in the central part of the apartment.

Photo: location of the router in the apartment

This way, as much space as possible will fall within the range of action.

If the apartment or house has two levels, then the router must be placed on the ground floor at the highest point, this can be a mezzanine or a closet. You should not litter the area where the router is located with various objects (including metal ones). This will allow the signal to travel unhindered.

Device frequency matching

In apartment buildings, there may be up to 20, or even more, wireless networks in the accessibility zone. It's not good for working alone specific device. All available networks tend to overlap and use the same frequency channel. As a result, the network supply level deteriorates even at a relatively close distance.

In this case, strengthening the Wi-Fi signal is very simple and easy; even the most inexperienced user can figure it out. First, you should install on your laptop special program, which is used to determine free channel. The most commonly used is inSSIDer. After launching the program, the screen will display a list of all available wireless networks and the frequency channels they occupy. You must select a free channel. To do this, perform the following steps:

If all channels are already used by other people’s routers, you should choose the least loaded one. For the settings to take effect, click “Save/Change”.

Modern Wi-Fi protocol – 802.11n

Today, the 802.11n standard is the newest. In addition, it is also the fastest due to its increased coverage radius. If all devices in the apartment that access the Internet support this standard, in this case it is possible to switch to 802.11n.

In order to switch to the 802.11n operating mode, you must:

Low transmitter power

Many router models are equipped with a function for adjusting the supply power Wi-Fi signal. You need to make the appropriate changes in the router settings:

Transition to 5 GHz

Most routers operate in the 2.4 GHz band. However, more expensive models Routers can send signals in the 5 GHz band. Therefore, it is recommended to switch to this particular range, since it is practically free and not occupied by other devices. In this case, the coverage will spread over a larger area.

The transition to the 5 GHz band is possible if the connected devices can operate in this range.

Hardware Wi-Fi signal booster

If all the above steps have been carried out, but access to the network is interrupted, do not despair. Perhaps all is not lost yet. There are several tricks that can help solve this problem. To do this it is necessary to modernize wireless device. You can increase the coverage radius using a second router. To do this, you need to configure between the two devices wireless bridge, using Wireless Distribution System technology. It will allow you to increase your coverage area by combining several routers into one network.

You can also do some tricks with antennas. Most routers are equipped with external removable antennas. They are often underpowered by about 2 dBi, sometimes 5 dBi. They can be easily replaced with stronger ones. To do this, it is worth unscrewing the old ones and placing new ones with a higher coefficient in their place. In addition, you can purchase an antenna with a cable and a special stand. It connects to the router. At the same time, it can be moved around the apartment, thus providing coverage without changing the position of the router.

If a device has more than two antennas, then replacing them will be too expensive. It will be cheaper to purchase a repeater. It is also called a repeater. In other words - a repeater.

Using a repeater

Users often encounter the problem that in large apartments the range of the router signal is not enough to provide coverage in all rooms. To solve this problem, aids will be useful. A repeater can be used as a signal amplification device. This device connects to an already existing network as a client. With its help, the coverage area expands. It must be installed between the router and the work computer.

The repeater is compact in size and relatively inexpensive. The repeater looks like a small power supply and operates from the network. There are many options for such devices on the market.

Improving the adapter on your computer

The reception of the distributed signal can also be enhanced on the client device. This advice will be useful to those users whose computers have adapters connected via a USB port. However, this option will be useless for owners of tablets, smartphones and laptops, since the antennas in such devices are built-in. When using a USB adapter to access the Internet, do not connect it directly to the computer. To begin with, you can use an extension cord,

and connect the device through it. A long cord will allow you to move the modem around the house, searching for a network.

You can also purchase a USB adapter booster. It is capable of providing network access in areas with weak signal. TO this device The modem is connected and placed in a place with Wi-Fi coverage.

Rebooting the Router

A weak signal and interference may occur due to outdated router firmware or if the installed drivers require updating.

There is no financial cost required to update drivers. They can be downloaded for free on the official website of the router manufacturer. Install them on your computer, the level and quality of the signal will increase.

Antenna upgrade

This method will help you upgrade your device using a reflector. To make it you will need foil and thick paper or cardboard.

A parabola with two holes for the antenna is cut out of paper and attached to a rectangle made of foil. The resulting device must be secured to the antenna. Thus, the signal will become directional. You can also use a drink can as a reflector by cutting it lengthwise, cutting off the bottom, and placing it behind the router. The reflector is directed in the direction where it is necessary to provide coverage.

By following these simple tips, you can significantly strengthen the Wi-Fi signal on your laptop. To do this, you don’t have to spend a lot of money on buying new devices. You just need to take a little time to study the router settings or use available tools and upgrade the device yourself.

How to strengthen wifi signal Almost every user thinks about a router at one time or another. As a rule, such a brilliant thought occurs to a “user” when, at the most inopportune moment, the WiFi signal disappears in an unknown direction: for example, there is an urgent need to send a message on a social network, or the climax has arrived in a favorite movie.

However, strengthen the signal wifi router It’s quite possible to do it yourself in an apartment, and you don’t need to be a “hacker in a Guy Fawkes mask” to do it.

How to strengthen the signal of a wifi router with your own hands?

1. One of effective ways WiFi signal improvement is . Let's say you have a 4-room apartment, and in each room there is a device that requires wifi connection(for example, a laptop, smartphone, phone and tablet): in this case, the optimal solution would be to install the router in the center of the apartment so that there is an equal distance between the wifi transmitter and the devices.

Yes, modern router models will not be frightened by small obstacles in the apartment (such as tables, headsets, refrigerators or thick walls), but such “obstacles” have a significant impact on the propagation of the wifi signal from “early” router models.

2. A special device - a repeater - will help to strengthen the signal of the wifi router in the apartment.

This inexpensive device will cost several times less than buying a new, more powerful router, and by “cloning” the router signals, the repeater allows you to improve the wifi signal several times.

To configure the repeater correctly you need:

• - turn on the repeater and connect to it via cable or wifi connection;
• - go to the repeater interface from your computer: to do this, enter and specify your login and password in the browser;
• - on home page go to the “Repeater” section: after activation, the device will find all available wifi points access;

To strengthen the wifi signal in the apartment, select your access point and click “Apply”.

3. Special influence on wifi speed renders the network standard set in the router settings.

Today, the most common is 802.11n, which replaced 802.11g (we will not take the absolute leader 802.11ac as an example, since it has not yet entered mass production).

Setting the required standard is not difficult: the main thing is that your router fully “supports” it.

How to strengthen the wifi signal on a router?

4. On some models D-link routers and Zuxel provides the ability to manually adjust the signal strength. To strengthen the wifi signal yourself, you need to find the “Transmit Power” (or “Wireless Transmit Power”) item in the router interface in the “Advanced settings” section and set it to 100%.

To do this:

Let’s take as a basis that , and the main router (let it be “1”) successfully distributes wifi;
- go to router settings “2”;

Select “Wireless mode” and fill in the fields in the same way as on router “1”;

Go to the “Enable WDS” section: a window with available networks WiFi;

Here you will see the SSID (network name of router “1”) and BSSID (router “2”): click “Search” and in the “List of Access Points” window that appears, select the network distributed by router “1”.

This option for strengthening the wifi signal is suitable for routers equipped with WDS standard technology. If your router does not support it, then simply connect the routers with a cable and set up a “bridge” between them:

Connect the cable on router “1” to LAN input and on router “2” in the WAN;

In router settings “1”, enable DHCP;

On router “2” go to “WAN” - “Connection type” - “Dynamic IP address”;

The parameters “Ip address”, “ ”, “ ” must already be specified: this means that router “2” acts as a “client” of router “1”, and the bridge is configured.

All these methods can be used individually or in combination. Particular attention should be paid to the “repeater” - the device famously burst onto the market and quite quickly “picked up” it for itself. And this is deserved: for its low price (for example, a decent option from TP-LINK TL-WA850RE can be purchased for no more than 1,500 rubles), the device will fully work out the money spent.

And, of course, you can increase the distribution of the wifi signal by purchasing a more powerful router: for example, the Tp-Link Archer C60 router, the price for this “miracle” varies around $100.

Each router has its own maximum range, initially set by the manufacturer. But usually the router does not work on full power for some reasons. Its capabilities can be increased not only by reconfiguration, but also by additional equipment.

What determines the strength and range of the signal?

Everyone has modern models routers have the same operating principle. There are two main characteristics of the signal:

• strength - maximum speed receiving and sending bits per second;
• range - the distance from the router at which you can catch a stable Wi-Fi signal.

For all routers, the strength and range of the signal are affected by the following factors:

• speed of the supplied Internet connection. It affects the maximum possible Wi-Fi speed-networks The router cannot transmit data to the Internet faster than an Internet cable or Internet modem. At the same time, the maximum Wi-Fi speed is sometimes lower than the maximum Internet connection speed;
• maximum throughput. The router is a router, that is, it redirects incoming and outgoing data to the desired stream, but the speed of sorting information is limited. In most cases, it is higher than the maximum Internet connection speed, but in cheap or older models it may not be sufficient;
• router settings. There are several characteristics, discussed in a separate paragraph, that affect signal quality;
• antenna. She plays the most important role in signal propagation. It determines how far and in what direction the signal will be heard;
• receiver. Each device has a built-in Wi-Fi receiver and a small antenna. If you don't have enough signal strength, it may be the device and not the router. It may have a receiver installed that is too weak or an antenna that is not powerful enough to receive an average Wi-Fi signal.

The speed of the connected Internet connection and the maximum throughput of the router cannot be changed in any way without replacing the equipment. But other parameters can be adjusted manually, thereby achieving maximum effect.

Video: how to strengthen the Wi-Fi signal

How to improve your signal without buying equipment

There are several ways you can change signal characteristics for the better without having to buy new equipment. Let's consider them in order of increasing complexity and time-consuming implementation.

Moving the router

If you have the opportunity, move your router to the place where you spend the most time on the Internet. Since most routers have a circular antenna installed, they distribute the signal over a certain radius around themselves. And the further the distance from the center, that is, from the router, the weaker the signal. It does not stop abruptly, but decreases gradually until it becomes too weak for stable transmission of information.

The signal is heard in all directions

Changing the location of the router can also help if the Internet connection is via a modem. Perhaps in a new location the modem will catch the signal better, which means the connection speed and Wi-Fi network will increase.

Setting up the router

The network distributed by the router has two characteristics that can be changed in any router model:

• a channel is a specific frequency at which the network operates. If you live in apartment building or you are in an office with several routers, they can coincide, several routers will work in the same channel. As a result, the signal speed will drop due to the fact that the router will have to filter signals intended for other routers;
• frequency - modern routers can operate in two types of frequencies (2.4 GHz and 5 GHz). Most often, the first version is used by default, but some models allow you to switch to the second. Since most routers operate in the 2.4 GHz band, after switching to another mode the amount of interference will decrease. It should be taken into account that 5 GHz is suitable for distributing a signal to long distances, but in a small room, especially if there are obstacles, they may lose in quality. Only by experience, by checking the speed and range of the signal at both frequencies, can you find out which option is better in your case.

Some models allow you to manually adjust the signal strength. Sometimes this parameter is set as a percentage, and sometimes in three values: low, medium, high.

Search for used channels

In Russia, you are allowed to use 13 channels (from 1 to 13 for 2.4 GHz), in America - 11. Therefore, the channel number available to you will be limited by your country of residence. Be sure to check this information before changing the channel. After setting a prohibited value, the device will not be able to connect to the network.

Before changing the channel, you need to understand whether it is worth doing and which channel you can switch to. To do this, follow these steps:

Change channel

Having found out which channel is least loaded, you can proceed to setting up the router. It will be carried out through the control panel, accessible from any device connected to a Wi-Fi network or via a LAN cable to the router:

Frequency change

If your router supports frequency change, then in the control panel this function can be found in the wireless network settings. To activate a 5 GHz Wi-Fi network, you need to switch to one of the following channels: 36, 40, 44, 48 (data for Russia, may differ in other countries).

Choosing what frequency the router should operate at

After switching to a new frequency, check whether the Internet has become more stable and faster, and whether the range of access to the network has increased.

Power change

Some models allow you to change the signal strength in the router control panel. If this item is in the settings of your model, then set the maximum available value.

We indicate the maximum power

After changing the settings, save the entered information and reboot the router.

Disable Power Saving

This item concerns setting up a device connected to the network. If the battery saving mode is activated on a laptop, phone or tablet, this may affect the stability of signal reception.

Since working with a Wi-Fi network requires a lot of energy, when energy saving is activated, the device tries to stop exchanging information over the network at any convenient opportunity. Because of this, Internet speed may drop.

Windows

To deactivate the power saving mode in Windows 10, click on the battery icon located in the lower right corner of the panel quick access. In the expanded block, move the slider towards maximum performance. Optional to install maximum value, the main thing is that the maximum long operation mode is not activated.

Moving the slider towards performance

Android

Swipe down from top to bottom of your device screen. Find the battery icon. If the mode is activated, the icon will turn red or turn into a battery with a plus (depending on the firmware version). Click on the icon to deactivate the mode.

Click on the battery icon to deactivate the power saving mode

iOS

To deactivate the mode on operating system iOS you need to do the following:

How to improve your signal with new equipment

To solve the problem, you can resort to replacing some components or purchasing additional devices.

Replacing the receiving device

Study the characteristics of the device from which you connect to the Wi-Fi network. Information can be found on the developer's official website or in the documentation that comes with the device.

The manufacturer may have installed a bad Wi-Fi receiving adapter or a weak antenna. By reading reviews, you can find out if anyone has encountered a similar problem. If the model has a problem with the adapter or antenna, it will be possible to replace these components by installing higher quality components.

You can replace the device antenna

But you should only replace components if you have sufficient experience in this. Replacing the internals will void the device warranty. If you are not confident in your abilities, contact the service center.

Antenna replacement

The task of the antenna is to distribute and receive a response signal. The distribution range depends on the power of the antenna, and the sector into which the signal will be received depends on the direction. There are two types:

You can buy a more powerful circular antenna if you want the signal to be heard in all directions. This is convenient if the router, for example, is located on the second floor, but devices from the first floor, and from the third, and from rooms located on opposite sides of the router are connected to it.

If you have the opportunity to position the router so that all devices are located in one line relative to it, then you can purchase a directional antenna. This way you will achieve a high signal propagation range.

Antenna modification

If you don’t want to buy a new antenna, you can remake an existing one or make a new one yourself. There are instructions on the Internet for different models and descriptions of how to make an antenna from scratch. Universal method no, since it is necessary to take into account the characteristics of each router, the conditions in which it will be located, the tasks it faces, as well as other characteristics of the antenna: length, width, material of manufacture, shape.

For example, you can make a special nozzle from pumpan foam or a wooden plank and nails. This attachment turns a circular antenna into a directional one, so the signal in a certain direction is amplified and weakened in others (see paragraph “Replacing the antenna”).

The antenna can be modified

The distance between the nails will increase in proportion to the distance from the antenna: 19, 24, 29, 33 mm. These distances are suitable for a router operating at 2.4 GHz.

The nozzle should be made, observing the dimensions

Purchasing repeaters

A repeater (or repeater, or access point) is a device that forwards a Wi-Fi signal sent by someone. The repeater catches the signal from the router and distributes it around itself with increased strength, that is, it relays it further.

It is convenient to use a repeater if the distributed network does not reach some point in your home or office. By installing a repeater at the extreme edge of the Wi-Fi signal, you will extend the range of the main Wi-Fi network. Setting it up is simple: one button is pressed simultaneously on the router and on the repeater, after which the devices are connected, and from that moment they begin to work in pairs.

Some routers have a “Boost” feature that turns the router into a repeater. If you have two routers, you can make one a Wi-Fi point, that is, leave it as a router, and turn the second into a repeater.

When buying an access point, you need to consider the compatibility of the router with this repeater model. It is recommended to purchase a repeater and router from the same manufacturer. For example, if you have a TP-Link router, then it is better to buy a TP-Link repeater.

Video: how to strengthen the signal through a repeater

There are many ways to improve your wireless network signal. If you don’t buy equipment, you can achieve results by changing the router settings, moving the device, or turning off the battery saving mode. With a small investment, you can replace the components of the receiving device, the router antenna, or purchase a repeater.

Instructions

First, try strengthening your Wi-Fi signal reception. It's better without technical intervention. Disable features that allow you to enable economy mode adapter operation. Open the Control Panel menu and go to System and Security. Now find and open the Power Options menu. Select the plan you are using when connecting to wireless hotspots.

Click the "Set up power plan" button. Now select "Edit" additional options nutrition." Find the Wireless Adapter Settings menu and expand it. Now open the "Power Saving Mode" menu. Select the option " Maximum performance» when operating on battery power or mains power. Save your power settings.

Now try increasing the work power Wi-Fi router A. Naturally, the easiest and most logical way is to purchase a more powerful device. Unfortunately, this approach requires large financial costs. So start by purchasing a better quality antenna. Most routers have their own antennas that are fairly easy to remove.

Examine the type of antenna mounting to the equipment. Buy a device with a similar mount and connect it to your router. If you are not satisfied with the result obtained, then try using available means to enhance the signal. Bare top part antenna in order to be able to connect a wire to it.

Take a piece of metal cable and solder it to the bare part of the antenna. Connect its other end to the computer system unit. IN in this case it is better to connect with back block so that the signal propagates in the direction opposite to the wall. As an alternative to the system unit, you can use a metal curtain.

Sources:

• how to strengthen wifi reception-signal

The quality of television and radio signals does not always satisfy viewers and listeners. Moreover, there can be interference even in the case when there seems to be powerful antenna. In order to improve quality reception, the antenna must be configured correctly.

You will need

• coaxial cable, portable radios or cell phones.

Instructions

If the antenna is directional, try repositioning it so that there are no obstacles between it and the signal source. Such obstacles can be high-rise buildings or other structures, power lines, and so on. You can try the exact direction to the signal source. To do this, you can use the help of an observer monitoring the signal at the receiver. To communicate with it, you can use portable radios or.

If you have a directional antenna with flat polarization (such as “Wave Channel” and the like), check the polarization of the received signal. Adjust it according to the received data. To do this, you need to rotate the antenna relative to the axis directed towards the signal source. Most often, just trying to rotate the antenna 90° is enough.

Efficiency antennas can be increased by antenna amplifier. But in this case, the gain limit is set based on the noise level. To reduce their level, use shielded reduction, that is, the antenna is best using coaxial cable.

Efficiency antennas, especially when taken on long, medium and short waves ah, you can increase it by installing additional grounding. It should also be borne in mind that the antenna must be impedance matched with input circuit radio receiver That is, it must be connected with the type and cable recommended in the instructions for the receiver or.

Please note

Long, medium and short wave antennas can be long lengths of wire. It is also recommended to install the mounting points of such antennas based on the highest reception volume of the desired stations. That is, it is necessary to change the position of the antenna.

Useful advice

If we are talking about an indoor antenna, then the best solution There will be installation of a stationary external antenna. This will dramatically improve the quality of reception. It is also recommended to connect portable mobile receivers and televisions to an external antenna when operating them in stationary conditions.

The coverage area of ​​the Yota provider is significantly smaller than that of operators cellular communication. For a subscriber living on the border of the confident zone reception, you have to take measures to increase the signal level at the modem input.

Instructions

Do not attempt to connect any amplifiers to the modem. Output power any wireless equipment, including the 4G (WiMax) standard, is limited by law. In addition, the amplifier may produce out-of-band harmonic emissions, which is also a violation.

Radio waves at frequencies used for data transmission in the Yota network are delayed, capable of conducting current. In a house whose walls are reinforced concrete, it makes sense to bring the laptop along with the modem to the window. Even if it does not go towards the base station, the signal strength may increase. You can simply walk around the room with a laptop - due to the presence of interference maxima and minima of the point with high level signals can be located anywhere.

Move the laptop to find places confidently reception not always convenient, and even more so if the computer is stationary. An extension cord will solve the problem, allowing you to carry the modem from the USB port to a distance of up to 2.5 meters. It must comply with the USB 2.0 specification, otherwise the data transfer speed will be reduced. Move the modem slowly because quality information is updating reception occurs with a delay.

To focus microwave radio waves, you can use parabolic mirrors similar to those used in satellite dishes. Best results provide reflectors precisely from such receiving devices. Place the modem at the focus of the mirror instead of the converter. You can also use surrogate reflectors in the form of ordinary metal cans, including painted ones. The modem cannot be placed outside the room, since it is not sealed. The entire structure will have to be placed directly in the room. The antenna must be pointed at the nearest base station Yota networks. If you don't know where it is, find out the best direction through experience.

Installing and configuring a Wi-Fi router in your own apartment is not difficult. But sometimes this is not enough because the standard coverage area of ​​the wireless access point is not enough.

You will need

• metal wire, soldering iron.

Instructions

To enhance signal Wi-Fi there are several proven methods. Some of them require purchase additional equipment, others - technical intervention in individual parts of the device.

Let's look at the boosts signal Wi-Fi router, changing it. You can simply purchase similar device different format. If you carefully study the structure of the router, you will see: it is attached to the device through a threaded bushing, i.e. replacing it is not difficult.

If you need to significantly increase the range signal, then you will need an existing antenna. Release its upper part from the insulating layer. Solder a metal wire to the open part of the antenna. Pull its other end out into the open.

If this was not enough, then solder the free end of the wire to the indoor television, having previously disconnected the latter from other devices.

Connect both Wi-Fi routers with a network cable. Connect one end of it to the LAN port of the device that you have already installed, and the other end to the Internet (WAN) port of the second equipment.

Open the settings of the second router and create a wireless access point with parameters similar to the first network. In settings network connection to the Internet select transfer type signal WAN.

Be sure to enable DHCP function in settings local network first Wi-Fi router. If you did everything correctly, then laptops connected to any of the two wireless ones will be able to access the Internet.

Related article

Sources:

• how to strengthen wifi signal

Tired of low Internet speeds, but don't know how to strengthen your Wi-Fi signal? Take advantage simple tips on setting up and installing equipment to bring the Internet speed closer to what is stated by the provider.

Low signal not necessarily related to network problems and technical work provider. Internet speed can be affected by the settings and location of the router, electronics operating in the house, especially garlands of light and microwave ovens. To strengthen the Wi-Fi signal, just follow the following recommendations.

Update your router. The capabilities of the device could become outdated over time, which means that the signal reception and transmission rates will be lower than those declared by the provider.

Change the router location. The higher the device is installed, the stronger the signal you will receive. You should not place the router on the floor, behind a load-bearing or insulated wall, a metal door, or in the far corner from the computer. Try to move the router away from the power cable. You will not be able to strengthen the Wi-Fi signal if there is an aquarium, a large mirror, a cabinet with glass shelves or doors, a mirror on the way to the router, and halogen lamps are used as lighting.

Change the frequency of your router and you will immediately notice Wi-Fi boost signal. To do this, choose a frequency of 5 GHz instead of 2.4 GHz. This way you will reduce the impact of all electronics on Internet speed. This is especially important if you have a nanny radio on all the time, are running video surveillance, or often use Bluetooth.

Don't forget to update the software on your computer and smartphones. Developers are trying to improve the performance of devices, including when working with a wireless network.

Effective Wi-Fi booster signal repeaters can become. The routers you have used before may also be suitable for this. It is enough to update the antennas in such a router and use it as a repeater.

If you have a common router in your house with your neighbors, you can configure Quality of Service (QoS) by setting a certain priority for traffic. This is true if your neighbors are streamers, gamers, or families with several children. Without prioritization settings, they will take up most of the speed.

Change the protocol network protection to WPA / WPA2 instead of WEP or limit the number of possible gadgets for simultaneous connection. If you have a checkmark on the Enable SSID Broadcas item in the router’s wireless network settings, then it is better to uncheck it. This way you can hide your Wi-Fi. Don't forget to set a password for your network.

Many users also wrap with foil rear housing router and put shields made of metal objects behind it. In some cases, this method allows you to strengthen the Wi-Fi signal without any additional settings.

A huge number of users abandoned wired internet in favor Wi-Fi technologies. Even some computer owners prefer to use a Wi-Fi adapter to get rid of network cables.

You will need

• indoor antenna, USB extension cable.

Instructions

There are several ways to improve Wi-Fi quality. This applies not only to routers, but also to the equipment that receives . The fact is that most Wi-Fi routers and similar devices have a very poor coverage area. Sometimes it is not enough even for a medium-sized house.

If you need to provide a high-quality signal over a large area, then it is best to use several routers to achieve this goal. They can be combined with each other, thereby creating several access points. In this case, you will still use only one cable with the Internet.

If this option you are not satisfied, try increasing the coverage area Wi-Fi adapter. To do this, replace its antenna(s). Find a better analogue or strengthen the antenna yourself. Select the equipment with which you will increase the antenna. For these purposes, both regular wires and a small indoor antenna are suitable.

Ideally, you should use an antenna "". Remove part of the router's antenna protective layer. Solder a metal wire to the exposed part. Connect its other end to the grille indoor antenna. This method allows you to enhance the signal by 20-30%. At the same time, you have the opportunity to hide the Wi-Fi router without losing signal quality.

If you want to strengthen the Wi-Fi of the USB adapter, you will need an extension cable. More often system units put away under the table or in hard-to-reach places. Naturally, reception and the signal in such places will not be the best. Buy a USB extension cable the right size. Connect it and plug in Wi-Fi. Place the adapter in an open space, such as on a table.

Every country has its own craftsmen, inventors and simply inventors. It would seem that for improvement reception signal of wi-fi equipment, you will need to buy the appropriate equipment or move to the best places reception signal, but you can enhance the signal quality using improvised means. No need to run to the hardware store to buy these materials; you most likely have them at home.