How to set sleep mode on Windows 7. How to set up sleep mode on a PC or laptop

What is the difference between sleep mode, hibernation mode and hybrid sleep mode?

Sleep mode is a low-power mode that allows you to quickly resume operation at normal power consumption (usually within a few seconds) upon user demand. Putting your computer into sleep mode is similar to pressing the Pause button on your computer. DVD player: The computer immediately stops all operations and is ready to continue working at any time.

Hibernation Mode- this is a mode of reduced power consumption, designed primarily for laptops. When you enter sleep mode, all open documents and settings are saved in memory and the computer enters a low-power mode, and when you enter hibernation mode, all open documents and programs are saved to the file hiberfil.sys on your hard drive, and then the computer turns off. Of all energy saving modes, used in Windows OS, require the least amount of power to maintain hibernation mode. If you do not plan to use the computer for a long period of time and there is no way to recharge the battery, it is recommended to put the laptop into hibernation mode.

Hybrid sleep mode- this is the mode that designed primarily for desktop computers. Hybrid sleep mode combines sleep mode and hibernation mode because all open documents and programs are stored in memory and on the hard drive and the computer is put into a low-power mode. If Hybrid Sleep is enabled, entering Sleep mode automatically puts the computer into Hybrid Sleep mode. On desktop computers, hybrid sleep is usually enabled by default.

As in normal sleep mode, during hybrid sleep the computer should not be de-energized. In the event of an unexpected power failure, the Windows operating system can recover data from the disk, but such recovery is not standard and is usually accompanied by an intensive load on the computer. hard drive- do not abuse it.

How to switch the computer to one of the modes?

Start---> click the arrow next to the "Shut down" button and select the desired mode:

If hybrid sleep is enabled in your power settings, selecting sleep will place the computer in hybrid sleep mode rather than in sleep mode. normal mode sleep.

Selecting which item will be displayed by default is also very simple - right-click on the button or on the free part next to it and click “properties”. Select the desired item from the "Power button action" menu. It is described in the pictures.

How to wake up a computer from sleep or hibernation?

On most computers, you must press the power button to resume operation. But because All computers are different, and the methods for resuming operation may also differ. To return your computer to normal operation, you may need to press any key on the keyboard, click the mouse button, or open the lid of the laptop.

Why is there no sleep or hibernation command in the shutdown menu?

The Hibernation command will not appear if Hybrid Sleep is enabled in the advanced power plan settings. If "hibernation" in the shutdown menu is necessary, hybrid sleep mode will have to be disabled.
The video card does not support sleep mode. Update your video card driver.
These modes are disabled in Computer BIOS. Restart your computer and enter the BIOS (Del or F2 key, usually), and turn them on in the power settings. Because BIOS version Almost all computers are different; read more about enabling these modes in the instructions for the computer (motherboard) or on the manufacturer’s website. To check whether your computer supports sleep modes, click Start---> in the search box type cmd and press Enter. In the window that opens, run the command: powercfg /a Some previous versions BIOSes do not support the ACPI interface, so computers cannot successfully transition to additional modes nutrition. IN in this case you need to update your computer's BIOS.

I don’t use hibernation, how can I turn it off so that the hiberfil.sys file is deleted? How to enable hibernation?

IN hidden file hiberfil.sys (root system disk) the copy is reset RAM when going into hibernation.

To turn off hibernation, run:

Powercfg /h off

To enable:

Powercfg /h on

The computer automatically goes into sleep mode, how can I disable this?

Setting options

How to configure sleep/hibernation when the computer is idle?

Start---> Control Panel ---> Power supply --->

You can configure the transition to sleep in the first window:

To change the transition to hibernation, press "":

How do I configure hibernation when the batteries are low? How to enable/disable low battery notification?

By default, the low battery notification appears when the battery level reaches 10 percent, and the battery backup notification appears when the battery level reaches 7 percent. When the battery level reaches 5 percent (critical battery level), the laptop enters hibernation mode. If your laptop has an older battery that has less power, the remaining 10 percent (when the low battery alert appears) and 7 percent (when the battery reserve alert appears) may not be enough to save documents and log out. . In this case, you should increase the values of the Low Battery Level and Backup Battery Level parameters.

A desktop computer with a source will have similar settings uninterruptible power supply(UPS).

Start---> Control Panel ---> Power supply ---> Setting up a power plan ---> Change advanced power settings

How to put the computer into sleep/hibernation using the power button on the computer or when closing the laptop lid?

Start---> Control Panel ---> Power supply ---> Setting up a power plan ---> Change advanced power settings

On laptops, it becomes possible to select an action when closing the lid:

The computer wakes up from sleep/hibernation mode on its own, how to fix this?

Start---> Control Panel ---> Power supply ---> Setting up a power plan ---> Change advanced power settings

Start---> Control Panel ---> device Manager and disable the "Allow this device to wake the computer from standby mode" checkbox in the properties of some components.

Most often, the computer is “woke up” by: keyboard, mouse, network card.

To view a list of all devices that can wake your computer from any sleep mode, click Start---> in the search field type cmd and press Enter. In the window that opens, run the command:

Powercfg -devicequery wake_from_any

The problem also occurs due to the use outdated drivers these components or the video card driver. They need to be updated.

How to eliminate waking up at the same time every day?

Known issue with update Windows Media Center , if express setup was performed.

Run task scheduler (Start---> All programs ---> Standard---> Service---> Job Scheduler).

Go to: Job Scheduler Library ---> Microsoft ---> Windows ---> Media Center ---> double click open the building mcupdate_scheduled

go to the tab Triggers---> click Change---> set a new (convenient) time for updating WindowsMedia Center.

Automatic reassignment

Microsoft has released an automatic fix, Microsoft Fix it 50448 - the update will run when you log in.

How can I disable the password prompt when resuming from sleep and hibernation?

How do I create shortcuts for sleep or hibernation?

Because standard Windows commands are not always executed correctly, I recommend using the PsShutdown utility. Read more about it.

How to put the computer to sleep/hibernation and resume work according to a schedule?

As in the previous question, we will use the PsShutdown utility (download) from Mark Russinovich’s PsTools. Download it and unzip it to any folder.

Let's launch task scheduler (Start---> All programs ---> Standard---> Service---> Job Scheduler).

Transfer to sleep/hibernation according to schedule

Click " Create a task":

We indicate Name For new task and check the box " Run with highest rights":

Go to the tab " Triggers", press " Create

Click " OK". Go to the " tab Actions", click " Create". In the next window, click " Review", indicate the path to the PsShutdown utility, and click " Open". As arguments we indicate:

-d - sleep mode
-h - hibernation mode

Click " OK", in the "Create task" window - again " OK".

The computer is configured to go into sleep/hibernation mode according to a schedule.

Wake up from sleep/hibernation according to schedule

To successfully remove the computer from extended power modes on a schedule, the computer's power supply ( motherboard) after being sent to sleep/hibernation was not interrupted.

Click " Create a task":

We indicate Name for a new task:

Go to the tab " Triggers", press " Create", in the next window we set the desired graph:

Click " OK".

To wake up your computer from sleep/hibernation mode, you need to schedule some task. This could be something useful, such as starting the Internet, or something less useful, such as displaying a message. Let's focus on the last option.

Go to the tab " Actions", press " Create", in the next window select the desired action and write a message:

Click " OK", go to the tab " Terms"and check the box" Wake up the computer to perform a task":

Click " OK".

The computer is configured to wake up from sleep/hibernation according to a schedule.

Still have questions? Ask them on our.

Windows 7 allows you to put your PC into sleep mode, which significantly reduces power consumption and also speeds up the process of resuming work on the computer, because exiting it is much faster than if you turn off the PC, you will need full load systems from scratch.

Settings operating system allow you to turn on the mode automatically, but the user can also manually put the computer to sleep. The PC automatically goes to sleep, provided there is no manipulation with it within the time interval specified in the settings. Sleep for a computer means turning off the functioning of the hard drives, display and other PC components, that is, energy consumption at this time is minimal.

Ways to save energy that Windows 7 has

The developers equipped the “Seven” with three standby modes to save energy:

Dream. Before “falling asleep,” it provides for preliminary storage in memory of the state in which the user left the computer. Thus, when exiting this state, all files, applications, etc. remain open. The user can quickly continue working as if he had never left the computer.
Hibernation. Typically used in laptops, because... allows you to save more energy during inactivity. The main difference with sleep is that the storage is not done in memory, but on the computer’s hard drive.
Combined mode. The parameters are saved on the hard drive and in the PC memory simultaneously.

All methods have in common an easy process of exiting modes - you just need to click any keyboard button.

Methods for canceling sleep mode

No matter how many benefits there are to energy saving, some users often want to turn it off. Windows feature 7.

There are three ways to disable sleep mode in Windows 7:

Using the control panel;
Using the command line;
Making the necessary adjustments in the register.

Method 1: Using the control panel

Removing it using the control panel is the easiest method. You need to perform the following sequence of simple steps:

Method 2: Using the Command Line

To disable the sleep function, you must perform the following sequence of actions with administrator rights:

Via the "Start" button in search bar enter “cmd.exe”, then press “Enter”;
The “cmd.exe” window will open, where you enter “powercfg.exe -h off”;
Then press “Enter” again;
Ready.

When the need arises to use energy saving, you will need to perform the above steps again, only instead of “powercfg.exe -h off” type “powercfg.exe -h on”.

Method 3: Make the necessary adjustments in the registry

To cancel the standby mode in the registry, you will need to adjust the “HibernateEnabled” and “HiberFileSizePercent” file entries. The following sequence of actions must be performed:

While holding down the “win” key, click on “R”;
The Registry Editor will open;
Next type “regedit”;
Then go to “HKEY_LOCAL_MACHINE” and to “SYSTEM”;
Click on “CurrentControlSet” and open “Control”, from where go to “Power”;
Adjust the file “HiberFileSizePercent” - for this, in its context menu Click on “Change” and put “Zero” in the opened window.
Then adjust “HibernateEnabled” in exactly the same way;
Next, restart the PC.

Sleep mode in Windows 10 allows you to save energy when you're not working or playing games on your PC. All users know that if you stop activity for a while, the computer “falls asleep.” Pressing any button launches all previously open windows and applications.

Sleep in Windows 10 VS Hibernation

Often these two concepts are replaced by each other, but there are differences.

When you turn off the PC from the power supply during sleep, its state is reset. A full reboot is taking place.
If the PC is in , then even with complete shutdown All data is saved. In this case, when loading, all windows and applications that were used before it was turned off will open in front of you.

Reduced power supply - that's what hibernation mode is Windows computer 10. The processor, hard drive and other components stop consuming electricity, only the RAM remains active. During hibernation, all devices “sleep”.

How to set up sleep mode on Windows 10

To make sleep mode in Windows 10 happen automatically or by pressing a button, you need to change its settings. First of all, let's check what parameters are generally available on a PC. The fact is that the hardware and BIOS do not always support hibernation or sleep.

Using the main menu (Start), open command line on behalf of the administrator.

Type powercfg /a and press Enter.

Waiting is synonymous with sleep.

Now we’ll tell you how to set up sleep mode in Windows 10. To get to the settings window, you can use different methods.

Control Panel

Enter the name in the search and open.

In the window, click on the “Power Options” option.

Options

From the main menu, open the window with computer settings.

Open the system. In the Power and Sleep section you will find quick settings. You can specify a time period for the operating system during which no action is taken. The OS will automatically perform the sleep procedure.

When you need more fine settings, click on "Advanced power options".

Run window

Press the WIN+R key combination and enter the line control powercfg.cpl.

In any case, a window will open. Here you can select the type of saving and configure the scheme.

And you can choose fine settings for the sleeper Windows mode 10 by changing additional parameters.

Here you can see how to increase Windows 10 sleep time individually for different components.

In the settings window, click on the “Power button actions” link.

Select actions for the power button on the case and the month key on the keyboard.

You can use unavailable options by simply clicking on the link.

They will become active.

By checking the box, you will add the desired item to the Start menu. For example, hibernation.

Thus, it is clear how to enable sleep mode in Windows 10: just use the Start menu or a key on the keyboard. If it is not there (an old or simplified model), then you can install this function on the PC power button.

For convenience, when you know how to set sleep mode in Windows 10, but its time varies depending on different parameters, you can create your own scheme.

Customize and create.

Now you can easily switch to the desired option.

This option can be used at different work intensities. For example, when downloading files, sending large amounts of data (quarterly, annual report, etc.), sleep can be canceled or set for a long period of time. This is convenient for administrators - leaving the system overnight, they will be sure that the PC will not go to sleep. And choosing the right scheme is faster than changing settings.

Instructions

To access all sleep mode settings, right-click on the desktop and select “Personalization” from the context menu (for Windows Vista and 7) or “Properties” (for Windows XP more than earlier versions).

Select the “Screensaver” section and click active link"Change power settings." In the new dialog box, open the “Hibernate Settings” menu and select the desired value for the “Put the computer to sleep” command. This will enable the laptop to automatically switch to this mode.

You can configure your laptop to go into sleep mode when you close the lid and return to working mode when you open it. To do this, in the Screen Saver section of the Personalization dialog box, go to the Power Options settings.

From the menu on the left side of the window, select “Action when closing the lid”, and then activate the “Sleep” value for the corresponding option. If you need to protect data on your computer from unauthorized persons, here also activate the command to request a password upon awakening. Then, when the laptop wakes from sleep mode, it will be impossible to start the system without entering the password.

In addition, you can assign the system action “Go to sleep mode” to the laptop’s power button. To do this, set the corresponding option to “Sleep” in the same dialog box in which you configured what the operating system should do when you close the laptop lid.

Please note

Setting automatic sleep mode can be done not only on a laptop, but also on desktop computer. The user's actions in this case will not differ from those described above.

Useful advice

After making all the necessary settings, do not forget to confirm the changes made by clicking OK or “Apply”, otherwise the new settings will not take effect.

Sources:

notebooks translation

If you need to urgently, turn off the computer as quickly as possible without resorting to simply unplugging power cord, or are you working with a large number programs that take a long time to save and open, or your computer takes too long to load when you turn it on, you can use the “Sleep” regime».

Instructions

Video on the topic

Scientists have calculated that a person spends about a third of his life on dream. It is also known that the great inventor Leonardo da Vinci devoted only 15 minutes a day to bliss. You can reduce the number of hours spent in bed by qualitatively increasing the level of your energy potential.

Instructions

The change can dramatically affect the need for rest. Changes must be made towards increasing the quality and decreasing the quantity of food. The fresher and more natural the products on your table, the less energy your body needs to spend on processing them. The fact is that natural, raw foods that have not been subjected to heat or chemical treatment contain special enzymes that allow food to digest itself. Consequently, the body has more energy for more useful activities.

Movement is life. We all know this golden rule from childhood, but we don’t always follow it. Meanwhile, the increase in movement is directly related to the number of “ dream new hours. Paradoxically, the more we move, the less time the body needs to spend sleeping in order to saturate the brain and other cells of the body with oxygen. Moreover, training, walking and any other physical activity can make dream deeper, which allows you to spend significantly less time on it.

By devoting at least 15-20 minutes a day to conscious breathing, you thereby prevent oxygen deficiency, which often becomes the reason for spending long hours in bed.

They say that advanced yogis who meditate for long periods of time during the day completely lose the need for sleep. Therefore, if you devote at least a small part of your time to sitting in silence, it will more than pay off with sobriety of thinking and extra hours of wakefulness.

Completely give up stimulants that promise you energizer activity. Energy drinks, coffee and even seemingly harmless tea give a false feeling of vivacity, for which you will have to pay with your health one way or another. The most effective drinks that can energize you without consequences are freshly squeezed juices. A glass of water with lemon in the morning is a great start to a vigorous day full of energy.

Video on the topic

Please note

Any changes at first can give a completely different result than you expect from them. Don't stop - after your body goes through a period of ridding itself of accumulated toxins, your body's strength will increase significantly.

Useful advice

Before moving on to any practices related to reducing sleep time, make sure that you really have something to do with yourself in the free hours that appear.

Sometimes it’s convenient to pause work for a while computer(for example, during a lunch break), and then turn it on exactly at the moment of work when you left it - with running programs And open documents. To do this in the operating room Windows system sleeper provided mode.

You will need

- computer;
- administrator rights.

Instructions

Go to the Start menu and find Control Panel. Click on the “Hardware and Sound” section, and inside it, find the “Power button action” item. It is in the list in the left area of the window. You can also click on the “My Computer” shortcut on your desktop and select the tab called “Control Panel” on the left side.

Set what action you want the computer to perform when you press the power button - namely, “Sleep”. Now every time you press the power button on system unit, the operating system will pause and shut down. Set the necessary settings in the “ Password protection upon awakening." If you select "Request password" and the password itself is on your account is not specified, the operating system will ask you to set it.

Try to create a difficult password so that it is not connected to anything, but is some combination of upper and lower case characters. Click on the "Save Changes" button and you will be returned to the previous section. Go to the section “Setting the transition to sleep” mode» and set the necessary parameters. This way you can leave the computer while it is sleeping mode it will go away on its own after a certain period of inactivity.

When a sleeper is activated mode and the operating system saves the current data to the hard drive. When frequently “visiting” a sleeping person mode and on a hard drive, a lot of space on the hard drive will be spent on storing temporary files, so you shouldn’t constantly keep the computer on mode e sleep - wakefulness. Try to use this function on the computer in extreme cases. As a rule, the computer should regularly “rest” so that all components do not overheat and work normally. mode e.

Often the input password to enter the operating system becomes unnecessary function. How can I turn it off? It won't take you long to remove this customization option.

Instructions

Open your computer's control panel. Find the user account settings menu, there you can change all the login information for the operating system, set or delete a password, change the system user name, add a new one, and so on.

Select the "Change Account" option on the right side of the window. To navigate through the menu, use the left and right arrow buttons and the Backspace key. Click once on the account whose login settings you want to configure.

Click on "Remove" password" To complete this procedure, you will need to enter it in the setup window that appears to confirm that you are the owner of the computer.

If you want to log into Windows without entering the installed account password, start your computer in safe mode. To do this, when you turn on the computer, press the F8 key. In the operating system boot options that appear on the screen, select safe mode. Log in to Windows using a different account.

If you do not use a computer or laptop for a while, the display turns off and you get the feeling that the machine is turned off. This situation indicates two situations: either the screen turned off, or the PC went into sleep mode. The given framework is not always suitable, and it is often required change sleep time on Windows 7.

A small digression. All modes are divided into 3 categories:

Sleep mode (sleep) is a state of the PC in which there is no shutdown, but reduced power is supplied. All open objects continue to be stored in RAM, allowing you to continue working instantly.
Hibernation – designed more for laptops. The entire contents of the RAM are flushed to the hard drive, then the power is turned off. Resumption of operation takes much longer, but battery savings increase. This is what distinguishes hibernation from sleep.
Hybrid mode – combines the characteristics of sleep and hibernation.

Methods to open the power option

To change the sleep mode transition time in Windows 7, there is an option called “power”, which can be found in 4 ways:

1. Click “start”, enter “power supply” in the search and select the item shown in the picture.

2. Hold down the Win + R keys and copy into the “Run” command input window powercfg.cpl. Click OK or Enter.

3. The most long way. Go to the start menu, select control panel. Make sure that there are large or small icons in the “view” field. On the list Windows settings 7 Find the "power" option.

4. On a laptop, when you click on the button with the triangle icon in the tray, the hidden icons. Among them, find the icon in the shape of a battery and a power plug, click on it with the left button. In the pop-up window, click on any of the 2 links at the bottom.

Changing the Sleep Mode Transition Time

After selecting one of the methods, the power consumption and sleep mode settings window in Windows 7 with adjustable configurations will open in front of you. In the window, click the link to go to sleep mode, it is located on the left.

Here you will be prompted to change the settings of the installed power plan. In my case, this is the “energy saving” plan. It will always be possible to reset the settings to default, so don't be afraid to experiment.

On the laptop you will see 2 columns:

On battery
From the network

Each column is given individual parameters. On a regular PC, accordingly, there will be 1 column.

To reduce or increase sleep time and turn off the display, click on the button located opposite the corresponding option. Set your time frame and click “save changes”.

If you always don't leave your PC idle for long periods of time, then select "never". This will disable sleep mode on your Windows 7.

To set your own transition time, click the change link additional parameters.

In the window We are interested in 2 sections:

Screen

Click on “sleep”, then “sleep after” and set your own time, down to the minute.

Click on “screen”, then on “turn off screen after” and also set the time period.

You can set other parameters, but after making changes, be sure to click the “apply” button and OK.

With such manipulations you can change sleep time in Windows 7. Basically, sleep has practical benefit on laptops or other devices that use a battery. On desktop computer This option is practically useless.