Sending MMS Beeline. How to set up MMS on Beeline automatically? All about MMS from Beeline

Sending multimedia messages is one of the ways to transfer files to another subscriber on mobile phone or email. Messages contain audio, video, photos or other files, the maximum size of which does not exceed 1 MB.

MMS can be sent not only to Beeline Russia subscribers, but also to users of any operator located both in the Russian Federation and abroad.

To access the Internet and enable the MMS function, you need to activate a package of three services. It includes MMS, GPRS, WAP. The last service will not be needed, since it is only relevant for outdated phone models.

You can check whether your phone supports receiving/sending MMS messages by reading the instructions for your mobile device.

Connection mobile internet and multimedia messages - required options. To activate the MMS service without the Internet, dial the toll-free number and follow the instructions.

To install the MMS service from Beeline using a USSD request, use the connection command: * 110 * 181 # . Next, follow the instructions written on the phone screen.

Setting up MMS messages on Beeline

You can set up receiving and sending MMS messages by calling the number. You can also activate the service in your personal account (personal account) on the Beeline website. The name of the service is Internet access and MMS.

The mobile phone should be connected to the Internet automatically after activating the SIM card. However, if it is not available, it is recommended:

dial the combination * 110 * 181 # . The phone screen will display information about whether the Internet Access service is activated;
call the number where you can receive automatic MMS settings. To save them, enter the password - 1234 .

Automatic configuration of MMS messages on Beeline

Once you have set up multimedia messages, you must enter the correct data to be able to read and send MMS.

The following series of actions are required:

Follow the link. Here you can order automatic MMS settings on the official Beeline website.
To get the settings, you need to know your phone model. Enter the model name or select it from the drop-down list.
Press the MMS key, then press Yes, go to settings.
You can receive them by clicking on the “send settings” button. If your mobile phone does not support this function, use manual setup, having first studied the instructions and strictly followed them.

The received data should be applied and then reboot the phone. To download automatic Internet and MMS settings, you need to call the number -. The call is free.

After the device restarts, you can send and receive MMS.

Manually setting up MMS messages for Android phones

You must enter the correct information to send and receive multimedia messages. MMS settings are set in automatic mode when installing a SIM card into a mobile device.

However, there are certain reasons why the message could not be created. In this case, you need to manually configure MMS on Android. In the mobile device settings you should create new profile and enter the details below:

profile name - Beeline MMS;
source page - http://mms/;
data transmission channel - GPRS;
access point - mms.beeline.ru;
proxy server address - 192.168.094.023;
for outdated phone models, the proxy port address is 9021, for new ones - 8080;
the authentication type is selected automatically - it is PAP;
user and password - beeline.

MMS is an instant multimedia messaging service that allows users of mobile communication services to use the ability to send texts, photos, video and audio recordings to other subscribers. Maximum size files available for sending is 500 kilobytes, and the number of text characters should not exceed 1000 characters. You can send multimedia messages not only to a phone number, but also to an address email. You can send MMS both within the territory of Russia and abroad. The cost of sending one message depends on the tariff and averages 7.95 rubles.

Sending MMS from Beeline via the Internet has recently been blocked, so in order to be able to communicate with subscribers via multimedia messages, you need to connect and configure this service on your mobile phone.

How to connect MMS to Beeline?

You can check whether the MMS service is connected or not by contacting the Beeline support service at 8-800-700-0611, or by visiting home page your personal account where a list of connected options is displayed. If the option is disabled, you can activate it in one of several available ways:

Dial and send the command *110*181# call from your phone. It includes a package of three services, which includes support for sending and receiving MMS messages.
Go to yours, open the “Available” list in the “Services” menu, and then select the MMS connection. In the same way, you can activate the service via mobile application from Beeline for Android and other mobile platforms.
Contact an employee at one of the Beeline offices with a request to connect MMS - they will help you completely free of charge.

Automatic MMS setup

After MMS connections You must configure the option correctly to be able to read and send multimedia messages. To do this, follow these steps:

Follow the link: MMS settings to get to the menu for automatically receiving MMS settings for your phone model.
Select your phone model in the drop-down list, or enter its name yourself.
Click on the “MMS” button, then select “Yes, proceed to MMS settings.”
If automatic setup is possible, enter the phone number in the window and click the “Submit settings” button. If only available manual setting MMS, carefully read the instructions provided for your phone model and strictly follow its instructions (for various phones steps may vary).

The MMC configuration files received automatically must be applied, and then the phone must be rebooted. In addition to the above method, you can get automatic settings for your phone for free by calling 060432.

After the reboot, the MMS service should be activated and become available for use.

Manual MMS setup

If for some reason you cannot go to the site and find out the manual settings for your phone, create an MMS profile in the phone settings menu with the following data:

Save the profile with the above MMS parameters and reboot the phone. After this, you will be able to send and receive multimedia messages.

Despite the fact that text and, in particular, multimedia messages are slowly becoming obsolete, being replaced by the use of various instant messengers, such services are still in demand among subscribers cellular communications. They are simple, fast, and quite affordable. At the same time, if you need to install, configure and search for your friends/acquaintances/colleagues in messengers, messages are available to us, it would seem, by default, and they can be sent to any number from the contact book or outside it.

However, sometimes problems arise with sending MMS and SMS, and in such cases additional configuration may be required. And today we will just look at this question, and we’ll also figure out how to get SMS and MMS settings on Beeline.

Setting up SMS messages on Beeline: step-by-step instructions

If suddenly you encounter any problems when sending text messages, or they are not sent at all, fix this situation possible by checking the correctness of the settings specified in the phone. To verify that the settings are correct, follow these steps:

Go to the message folder on the device you are using.
Click on the "Settings" button.
Find the item with the SMS center number.
Enter the number in the appropriate field +79037011111 .
Save your changes.
Reboot your device.

After completing these steps, SMS messages will be sent correctly. If you use iPhone device, the SMS center number for sending messages correctly can be configured in another way:

Open the Phone application (standard dialer).
Go to the “Keys” tab in the status bar to dial a phone number.
Enter the combination in the format *5005* +79037011111# .
Reboot your device.

Automatic setup of MMS on Beeline

If you are faced with the task of configuring multimedia messages that do not work correctly on the device, then the most rational thing to do first is to try to order configurations in automatic mode.

To automatically configure mms messages, Beeline subscribers need to enter a USSD format combination on their phone *110*181# . The settings will be sent to your phone in a response message and will need to be applied. In addition to settings for MMS, the phone will also receive configurations for the correct functioning of the mobile Internet.

Manual setup of MMS on Beeline

If suddenly the automatic settings do not “make” multimedia messages work correctly, you will need to configure the device yourself. To do this, you must manually set the parameters for correct operation mobile internet.

Manual setup of mms on Beeline for Android devices

To complete the setup procedure, subscribers need to go to the following points on their gadget:

Go to the main menu of the device.
Open the configuration section.
Go to the “More” tab.
Launch category " Mobile communications».
Open “Data transfer.
Launch "Access Points".
Create a new access point.

For a new access point, you must specify the following parameters ( all data is entered without using quotes):

The first parameter that needs to be filled in is the name new setting. Here you should indicate " Beeline Internet »;
Next, you should go to the section for entering the APN point, for which you need to specify the address internet.beeline.ru;
Fields such as “Proxy” and “Port” should be skipped, leaving the fields as standard;
The same parameter is entered as the user name and password “ beeline»;
The next 5 points must also be skipped, leaving the fields in the standard form;
The identification type is specified by the parameter “ PAP»;
In the field below, assigned to the ALP type, the parameter “ default»;
The protocol used for the APN point is IPv.

After entering all the parameters, you must save them and reboot the device.

Manual setup of MMS on Beeline for iPhone

If you are using a device running operating system iOS, that is, iPhone or iPad, the procedure for setting up MMS will look slightly different. Before you start entering settings, you need to get into the appropriate menu, and you can do this like this:

Go to the settings of your phone or tablet.
Open the main settings section.
Go to the “Network” subcategory.
Tap on " Cellular network data transfer" and start filling out the settings.

To configure MMS correctly, you need to specify significantly fewer parameters, namely only three:

You must enter the same address as the APN point internet.beeline.ru.
As login or username – beeline.
As a password – a similar parameter “ beeline».

Video instructions for setting up MMS on Beeline for iPhone

After saving the settings, you can start using MMS on Beeline.

Let in modern world This option is rarely used, but clients of the “yellow-white” operator are regularly interested in how to configure Beeline MMS, because sometimes only this method of transmitting multimedia content is available. Here is one case of using the service: a grandmother asks her grandchildren to teach her how to send photos. Using advanced communication methods through smartphone applications is already too difficult for her, and sending photos via MMS from a regular push-button telephone- just right.

Receiving MMS (in the form of a text link that can be opened in a browser) is available to any Beeline subscriber, even if he has not activated the service or configured the phone. But to send multimedia messages, these steps will have to be completed.

Activation of the option is available in a special “Package of three services”, which is a combination of 2G-4G Internet access and MMS transmission (the third service is the WAP protocol, but it is outdated and not used).

"Three services" are available by default for everyone new SIM. If they were once deactivated and you want to enable the package again, just type on your keyboard USSD request*110*181# and press the call button. Now all that remains is to set the “cellular” access parameters to the MMS system.

How to set up MMS on Beeline automatically

Most operational method start using multimedia messages - get Beeline MMS settings on your smartphone ready-made. This is done on the “yellow-white” website using the link:

Open the section " MMS settings» Beeline website or just follow the link above.
Enter the manufacturer and then the device model.
Click on the inscription “MMC”, make sure that the operator offers auto settings for your device.
Specify subscriber number, click “Send” and wait for a service SMS from the operator.
If there is no option to request automatic tuning for this device, the manual tuning algorithm will be displayed on the screen.

Another way is to dial 0880, then this number An SMS will also be sent. When a service message arrives, a request to apply the received parameters will appear on the device display, followed by a field for entering a password. Agree with the request and enter the code “1234”. Reboot your phone. Hurray, now you can send MMS!

Settings for MMS Beeline manually

If the auto settings for your model are not presented on the website, or the device does not want to accept them for technical reasons, the settings MMS Beeline also available for self-installation.

Here are the main parameters that are enough for the option to work:

Profile name: BeelineMMS
Access Point Name: mms.beeline.ru
Name/password: beeline
ProxyServer: 192.168.094.023
Port: 8080 (for very “ancient” devices - 9201)
MMSC: http://mms

Suggested manual settings are indicated in the communication section on different phones items may be named differently. Let's look at examples for common operating systems.

Beeline MMS settings for Android

An approximate algorithm for this “OS” would be as follows:

Select Settings in the main Android menu, then tap on “More...”.
Find the “Mobile” section. network" and check the box next to the "Data transfer" option.
Open the list of access points and create a new one.
Enter all connection parameters specified above.
Save the changes and reboot the device.

How to set up MMS for iPhone

Let the settings on your phone be under iOS control a little different:

Open “Settings”, go to the “General” menu.
We look for the inscription “Network”, and then the subsection “Cellular”. data network."
Activate the “Cellular Data” item.
Enter everything required parameters, save.
We send the smartphone to reboot.

A useful Beeline MMS option provides the user with a convenient opportunity to send and receive multimedia messages various formats(video, audio, pictures and photos, test files). In this case, the operator allows you to use both the SIM card telephone number and an email address as the final address. Against the backdrop of the recent blocking of the Internet forwarding system emails through global network More and more subscribers are interested in how to set up receiving MMS on Beeline in order to always have it at hand fast service transmitting and receiving important information.

In the article:

The online assistant site will tell you in detail how to set up MMS on Beeline yourself, manually or automatically with the help of your provider. We will also touch on the terms of provision and functionality services. In this case, we will take into account the differences in the settings interface in mobile devices ah with Android and iOS OS.

Features of MMS Beeline

The multimedia messaging service uses the operator's WAP servers as an intermediate storage for forwarded data. If one subscriber sends another MMS (picture, photograph, music file), the recipient receives a text notification from the operator with an offer to download the sent information to his phone. This procedure is only possible if you first connect to the device “Package of three services”, which allows you to use the main data transmission channels - MMS, GPRS-Internet and WAP.

The cost of an outgoing multimedia message depends on the current tariff plan and can vary from 1.60 to 7.95 rubles. However, the service does not provide subscription fee for postpaid and prepaid tariffs and any charges for its activation by the user. An exception is the situation with trips around Russia or being in international roaming. Here the sender will also have to pay for GPRS traffic, taking into account the nuance that the networks of some mobile operators limit the size of one multimedia message to 300 KB.

In this Beeline plan much more democratic and imposes less strict limits on MMS size for its users:

to a phone from another provider – up to 500 KB;
sending within the network – up to 1 MB;
sending text – up to 1000 characters.

Very often, when setting up an Internet connection on your phone, the Beeline MMS service is disabled by default to optimize the device settings. Many mobile device manufacturers consider the Internet universal communication channel and adhere to the rational point of view that an experienced subscriber will always activate additional data exchange technology if he really needs it.

How to set up MMS on a Beeline phone

The first step of setup is to check if the Triple Pack is available on your device. To do this you can:

call the customer support center at 0611 or 8 800 700 06 11 ;
use USSD command * 110 * 09 # , which will send an SMS message to your phone with a list of all active options;
ask a question via SMS and send a message to 0611 ;
visit the Services section in your Personal Account.

If the query reveals that a key option is missing, you must activate it immediately. To activate the “Package of three services”, it is most convenient to use a special USSD request * 110 * 181 # . You can also contact a consultant at 0611 or visit the nearest provider office.

The online service Personal Account is also becoming increasingly popular, where you need to go to the Services section, select the Available category, find the “Package of three services” option and click the Connect button. Has the same capabilities special version Personal account for smartphones and tablets – the “My Beeline” mobile application, which is available on the provider’s website in modifications for various OS.

After activating the “Package of Three Services” you will need to perform automatic or manual configuration of MMS Beeline for a specific mobile device.

How to set up MMC on Beeline automatically

A convenient option for obtaining automatic settings is free call on special number 0880 . In response to this action, the operator will send a service SMS message with network access parameters. To save the settings, you will need to enter a four-digit password, which by default is represented by a simple set of numbers - 1234. You can also use a separate technical number 06 04 32 or 06 74 10 15 .

Please note that new phone settings may not be accepted by the OS and SIM card until the device is rebooted.

Another way to gain access to sending and reading multimedia messages is the operator’s website. Here you need to open a special page “Getting settings for your phone” (moskva.beeline.ru/customers/help/mobile/mobilnyy-internet/nastroika-telefona).

In the form that opens, the subscriber will need to enter manually or find his device model in the Entire list and click the Select button. After this, you need to successively click on the MMS and Yes, go to MMS settings.

If for a specific modification of the device the operator has an automatic MMS configuration, you will have access to a line for entering the phone number to which a service SMS message will be sent. To confirm your action, click the button Send settings. After you read the SMS and save the received configurations, do not forget to reboot the device.

How to set up MMS on Beeline manually

In a situation where the provider does not have a file with automatic settings MMS, the subscriber will need to change the configuration account manually, using information from the table we propose:

When entering data, it is important to avoid spelling errors, place periods, colons and slashes correctly, and not rearrange fields. Then all you have to do is save the entered parameters, reboot the device and send a verification MMS to another number.

How to set up Beeline MMS on Android

To correctly use the data from the table for devices with Android OS, you must adhere to the following algorithm of actions:

sequentially select the Menu and Settings icons;
go to the Other networks or More section;
activate the item Mobile networks;
tick Mobile data and select the Access Points section;
activate the item in the pop-up menu New point access;
sequentially enter data from the table in the fields Name, Access Point, Proxy, etc.

How to set up MMS Beeline on iPhone

A similar algorithm is provided for devices running iOS. But due to serious differences in the names of menu sections, manually setting up the Beeline MMS service on an iPhone or iPad requires separate instructions:

sequentially select Settings and Basic items in the menu;
open the Network tab;
activate section Cellular data network;
enter data from the table by filling in the APN fields, Username, Password, MMSC, etc.

To send multimedia messages without problems, you will need to add your SIM card number to your MMS profile settings. To do this, go to the Settings menu item, open the Phone section and activate the My number bookmark. Please note that the input phone number must start with +7. At the last stage of changing configurations, it is important to reboot the device.

In conclusion

Internet assistant Tarif-online.ru hopes that our review on how to set up MMS on a Beeline phone was useful to you and helped eliminate any difficulties encountered with transmitting multimedia messages. Finally, let us point out important point with receiving qualified assistance through the “My Beeline” mobile application, which features an online chat with the operator’s consultants.

Be sure to check out the thematic video lesson, which will help you better understand and systematize the material you read.

Video: how to set up MMS on Android

If you have any unresolved questions, you can always use the help of our website by describing the problem in the comments line to the article. We will also be glad if you share yours interesting experience as a Beeline subscriber.