• iOS firmware for samsung galaxy s3. Installing official firmware on Samsung Galaxy S3

    Full instructions by phone firmware Samsung Galaxy S3 on CyanogenMod 11 with Android 4.4 KitKat.

    Follow the instructions exactly and you will succeed! At the beginning of the process, make sure that your smartphone is charged more than 50%! Those who already have custom recovery installed can immediately proceed to point No. 8.

    1. Immediately create a folder on the disk with in English letters or numbers for

    the necessary files (for example: C/:i9300).

    Download touch recovery-clockwork-touch-6.0.4.4-i9300.tar.md5

    Download Odin PC Odin3_v3.09.zip

    Download Google app kit gapps-kk-20140105-signed.zip

    Download SAMSUNG USB Driver for Mobile Phones v1.5.29.0.exe

    Download the rootkit CF-Auto-Root-m0-m0xx-gti9300.tar.md5

    Download the standard recovery-clockwork-6.0.4.3-i9300.tar.md5

    Download latest firmware CyanogenMod 11

    3. Disable everything unnecessary on your computer:

    If the Kies utility is installed, then you have 2 methods:

    Remove Kies

    Go to the application manager (ctrl+alt+del) and end all processes that say Kies

    Disable the installed antivirus.

    4. Install the programs needed for the firmware:

    Install drivers SAMSUNG USB Driver for Mobile Phones v1.5.29.0.exe.

    Unpack Odin3_v3.09 (Extract to Odin3_v3.09).

    5. Switch your smartphone to Download Mode:

    Turn off your smartphone completely, everything should go out.

    Press three buttons at the same time - Power, Volume Down and Home

    A warning will appear, you must click "Volume Up"

    "Downloading" will appear with a green robot in the middle.

    6.1. Install root rights for Galaxy S3:

    CF-Auto-Root-m0-m0xx-gti9300.tar.md5, which you downloaded to the i9300 folder

    6.2. Rooting

    Procedure installation will take place fast

    Then you will see the message “RESET” and the smartphone will reboot into root installation mode

    Then the smartphone will reboot into normal mode.

    Disconnect your smartphone from your PC

    7. Install recovery (cwn) on Galaxy S3:

    Follow step 5!

    Launch Odin3 v3.09, which should be in the Odin3_v3.09 folder

    Click on the PDA field and find the file recovery-clockwork-touch-6.0.4.4-i9300.tar.md5 or recovery-clockwork-6.0.4.3-i9300.tar.md5, which was downloaded to the i9300 folder

    Connect your smartphone original cable to the PC, the first ID:COM field will turn blue.

    If all previous tasks are completed and completed successfully, click "Start"

    Once completed, you will see the message “RESET” and the smartphone will reboot.

    8. Install CyanogenMod 11 firmware on Galaxy S3:

    Turn on your phone

    Connect your smartphone to your PC in disk mode

    Copy to internal memory smartphone:

    Firmware cm-11-20140123-NIGHTLY-i9300.zip

    Google application kit gapps-kk-20140105-signed.zip

    Turn off your smartphone completely

    Press three buttons at the same time "Power + Volume Up + Home"

    The smartphone should boot into recovery

    In a loaded recovery, do the wipes in order:

    Wipe data/factory reset

    Advanced -> Wipe dalvik cache

    Wipe cache partion

    Mounts & storage -> format/system

    Then install the firmware and utilities in this order:

    Install zip from sdcard, find the firmware archive cm-11-20140123-NIGHTLY-i9300.zip

    Install zip from sdcard, find the archive gapps-kk-20140105-signed.zip

    Restart your smartphone. If you do everything correctly, you should see an animation of the loaded Cyanogenmod 11 and then the phone itself will load with the new firmware. The download itself will take longer than usual!

    For the current generation of people, the smartphone has become an indispensable assistant and an extremely useful apparatus that combines hundreds various functions. Taking a photo, counting the number of ingredients, setting reminders, checking the weather, reading the news, chatting with friends - this is not a complete list of everything that you can do. modern smartphones. Sometimes we simply forget that they do not last forever and are subject to gradual wear and tear.

    Smartphones running operating system Android systems have long filled the whole world with their diversity. Their program code open and ready to edit or improve. While using such devices, there are times when the software component malfunctions and the smartphone stops working properly. To solve the problem simple reset Resetting to factory settings may not be enough - you need to flash the Samsung Galaxy S3 GT-I9300.

    Fortunately, manufacturers of mobile equipment and simply enthusiasts have found dozens of ways to change the firmware for all Android devices without exception. The process will take a few minutes and the smartphone will come to life, starting its daily work with renewed vigor. AndroGoo website prepared detailed instructions on how to flash Samsung Galaxy S3 GT-I9300.

    What do we need?

    1. Device charged at least 50% (if possible).
    2. Original USB cable.
    3. version 3.0.7.
    4. Latest firmware:

    If a new OS version has been released for your smartphone or the one you need is not in the instructions, please let us know in the comments below the post.

    Samsung Galaxy S3 GT-I9300 firmware process

    • If Kies was installed on your computer, remove it.
    • Download and install for Samsung smartphones and tablets.
    • Download and install version 3.0.9.
    • Reboot the computer.
    • Unpack Odin onto your desktop. In the same folder we extract the firmware files from the previously downloaded archive.

    • On your smartphone go to “ Settings«, « For developers"(if there is no such item, go to " About the phone" and click many times on " Build number"), turn on " USB Debugging" And “Unlocking, provided. production".

    • We transfer the smartphone to Download Mode. To do this, turn it off completely, hold down the buttons at the same time Home+Power+Volume down.
    • After the screen appears with the message Warning, confirm the choice by pressing the button Volume up.

    • The phone has entered download mode.

    • Let's launch Odin on behalf of the administrator.
    • In this state, connect the device to the computer using a USB cable (exclusively USB 2.0) so that flash Samsung Galaxy S3 GT-I9300. If in the ODIN window the field ID:COM turned blue, like in the screenshot below, everything is fine - you can continue. If not, reinstall the drivers and restart the computer.

    Files that can be found in the archive with the firmware

    The picture shows the names of files that may be in the archive with the firmware and indicates where to insert them in the Odin window.

    If there is only one file and takes up a lot of space, insert it into the field PDA. This is the firmware.

    • In the appropriate fields on the right, select the firmware files, based on the example above. IMPORTANT! Only checkboxes should be checked Auto Reboot And F. Reset Time.

    • This is what the program window looks like ready for firmware:

    • Click on START and wait for the firmware process to finish. At the same time, it is strictly forbidden to disconnect the smartphone from the computer and touch USB cable. The whole procedure will take a few minutes - the exact time depends on the power of the PC.

    • Once finished, the device will reboot itself. We disconnect it from the PC and start using the latest firmware.

    Hello, today let me show you how to flash Samsung GT-I9300 Galaxy S3 standard firmware and rooted (or rooted?). Since the amount of information on this device is quite large, I decided that service codes, custom firmware and backup of this model I’ll tell you next time. Everyone already knows what kind of beast this is - there are a lot of reviews and reviews on the Internet.

    Initially, the device was supplied with Android version 4.0.4 “Ice Cream Sandwich”, they still deliver them with this old software, but you can already update it to version 4.1.2 “Jelly Bean”, they also promise updates at the end of the year up to version 4.3 - we're still waiting. Initially, in the first versions, the device was wildly glitchy, froze, turned itself off, applications stopped working (processes were terminated urgently), lost the network and stupidly died - it turned off for no particular reason and would not turn on again - on servers they stupidly changed the boards under warranty (who was lucky) and They explained that this was a factory defect, but about a year later the situation leveled out and there were fewer such jambs, which Samsung engineers could correct.

    The main drawback of this device today is its fragility - if you pressed or squeezed a little and God forbid you dropped it - a crack in the sensor is guaranteed, and this is a replacement display module entirely (up to 8,000 thousand rubles for repairs in some sharashkas). So be careful. And let's get started with the firmware.

    ATTENTION!!! Before you start updating software, rooting, resetting settings and other manipulations with your own or, God forbid, someone else’s device HIGHLY RECOMMEND read this one. In short, you have been warned and don’t say later that this is the first time you’ve heard this.

    Samsung GT-I9300 Galaxy S3 - software update and ROOT rights.

    Before we start flashing the firmware, let's first prepare everything we need:

    • Let's fully charge the battery;
    • MicroUSB Any cable will do, but it’s better to take one from the kit;
    • Firmware, latest version - I9300XXUGOE1 ;
    • Flasher program - Odin3 v3.04 ;
    • Drivers - install kies (when updating the software, do not run this application, or better yet, go to the task manager and kill all processes called kies). But it’s better to install the drivers there and post about how to install them correctly;
    • Personal computer or laptop of average configuration with operating system WIN7 SP1 should be enough;
    • CF-Auto-Root-m0-m0xx-gti9300.tar - firmware file for rooting.

    First do backup copy all data or use the KIES program to save all necessary files to the computer. Soon there will be an article on how to backup the firmware - I’m already writing it. You can download all files at the end of the article.

    Samsung GT-I9300 Galaxy S3- factory firmware.

    Step 1:If you have not yet charged the battery, then it’s time to do it, insert the battery into the phone and enter the device into DOWNLOADING mode - to do this, first press and hold HOME button(central), then the volume down key and then the power button.

    Step 2:Information will appear warning us about possible problems with the phone when using modified firmware. And it offers to either continue or restart the smartphone. Continue pressing the volume key up. A green android robot should appear. We are on the right track.

    Step 3:Download the archive with the firmware and flash driver and launch the application Odin3_v3.04.exe.

    Step 4:The main window of the flashing program appeared in front of us Odin3 v3.04.

    Step 5:And so, the smartphone is entered into boot mode, the battery is charged, important information is saved, the drivers are installed (do not forget to “kill” all Kies processes if you installed it). We connect the cable to the phone - the com port should be determined and a line with the word Added will appear - this is good sign, means that the device has been detected by the PC.

    Step 6:Now it’s time to configure ONE - selecting firmware files:

    PIT -mx.pit

    Bootloader - BOOTLOADER

    PDA - CODE _I9300XXEMG4_1314436_REV00_user_low_ship.tar.md5

    PHONE - MODEM _I9300XXEMG4_REV02_REV04_CL1360150.tar.md5

    C.S.C. - C.S.C. _OXE_I9300OXEEMH1_CL1359224_REV00_user_low_ship.tar.md5

    BE CAREFUL - CHECK SEVERAL TIMES!!!

    If everything is fine, press the START button.

    Step 8:"PASS"- in about five minutes the device will be flashed. All, Samsung GT-I9300 Galaxy S3 ready to use. You have latest version firmware.

    Step 9:Reboot and check the software version by typing the following code on your phone keypad *#1234# .

    Obtaining ROOT rights.

    If you still decide to root your Samsung GT-I9300 Galaxy S3, it means you are aware of what you are doing and take full responsibility upon yourself. And so let's get started:

    Step 1:Download CF-Auto-Root-m0-m0xx-gti9300.tar - This is a rootkit, so you will need to disable your ANTI-VIRUS, unzip this archive. Final file must have extension .tar or .tar.md5.

    Step 2:We switch the device to DOWNLOADING mode - see the instructions above.

    Step 3:Let's launch application Odin3 v3.04.exe.

    Step 4:Select the rootkit file and put it in the field PDA. If you have android version 4.1.x - then be sure to uncheck Auto-reboot.

    Step 5:We connect the phone with a cable to the computer and press the Start button. In a minute, the device will flash, and since we unchecked Auto-reboot- turn off the device manually and enter it into recovery mode by holding the volume up button in turn, then the HOME button and the power button. Root rights are automatically installed.

    Share:

    The world of Android is incredibly unusual, but no less complex and diverse. As we all know, many developers are working daily to release new firmware that is more efficient and more customizable. And it’s very difficult to navigate, because there are simple firmware that offer maximum battery life, and there are others that make it possible to customize Android as much as possible for your needs. It is precisely because of this that we decided to create this article in order to show you all the firmware that can be used daily and is of the greatest interest.

    Each firmware presented here has been tested for one week to ensure reliable daily use.

    Please note that if after flashing your smartphone constantly reboots or shows the initial logo image without subsequent loading, then this is not the worst thing and if you do the right things, this will not happen to you, or next time the firmware will be successful.

    Attention: flashing a smartphone is a risky activity and therefore you are responsible for all your actions. If you end up with a “brick”, it means you did something wrong.

    Once you have chosen the firmware version, you can begin to study the instructions, which are available below. But first of all, have it just in case stock firmware for your Galaxy S3 so that you can return to the default settings.

    First, let's do a test in the quadrant:

    And a short video presentation (you can watch the video after the video, since you are unlikely to understand anything by ear):

    Now you can proceed directly to firmware and modifications.

    ROM ICS 4.0.4
    1.ParanoidAndroid

    The image above shows brief overview firmware contents. So it's obvious that it runs on Android 4.0.4 and aims to bring together the capabilities of best tablets With the best smartphone in the world. In the end, it worked out quite successfully.

    Indeed, 4.8-inch Galaxy screen S3, in theory, allows you to experiment and use different menus. Even if at first glance they seem small. This firmware is suitable for those who prefer to work with pure Android without the TouchWiz shell. However, don't be surprised that all the new Samsung products (S Voice, etc.) are present here. And here is the result of the firmware test:

    2. RGUI battery friendly
    As you can guess from the name of the firmware, it is based on MIUI and is designed for maximum operating time. Even if you use Galaxy S3 with maximum load, then the battery life will still please you. We confirmed this in our tests.

    This firmware provides great opportunity for configuration customization. You can also apply different themes to the system. Icon design, modified themes, transition animations, customization of the notification panel - everything is here. As for the battery life, it really holds a charge for a long time. With normal use of the smartphone, it was able to last 1 day and 14 hours. With intensive use, the battery lasted for 23 hours. The only possible complaint about this firmware is that it looks too much like a jailbroken iPhone for our tastes. Here is the screenshot:

    And this is what it looks like home screen. Don't be surprised if you can't find the application menu - it doesn't exist. Basically, everything is copied from the iPhone, when all the icons are collected on one screen.

    We go to the settings menu and everything is as usual.

    This is the notification menu. There is an advantage over previous firmware– we have the maximum opportunity to customize as you wish. In addition, you should remember that the MIUI firmware has a tool for applying various themes. There are countless themes available that will change your phone every detail in a split second. To complete the presentation of the firmware, let's look at the characteristics.

    ROM Jelly Bean 4.1
    1. ANDROID REVOLUTION HD 11.0.0
    This new firmware, which runs on the latest Android Jelly Bean. The good thing is that it is becoming more and more stable. We chose it because we need to take the Android 4.1 modification for comparison. And we were not disappointed in it, it is actually reliable.

    We think that it is not worth posting screenshots of this firmware, because it completely repeats the design official firmware from Samsung. Everything is just as simple, fast and smooth in animation.

    If you want to improve the performance of your Galaxy S3 then this firmware will suit you. You can download it from here.

    2. SUPER NEXUS
    The Samsung add-on has its own advantages, which sometimes turn out to be discredited. It's a personal matter to love or hate her.

    Thus, this firmware offers good alternative. Indeed, the new firmware will make your Galaxy S3 real Galaxy Nexus. The OS interface is user-friendly, responds smoothly, and the animation effects are well done. If you want to discover completely new interface, completely developed by Google, then you can use this mod.

    It's obvious that it's almost pure android and therefore there are no applications and options that are in the official Samsung firmware (Pop-up Play, S Voice, etc.).

    Here are her screenshots and video:





    You can download this firmware from this link.

    3.OMEGA V27

    OMEGA firmware has been known for a very long time and it has managed to firmly establish itself in the world of developers. Why? Simply because these firmwares are stable and have a wide range of settings. Plus, it's easy to switch from one theme to another. They are based on the main Samsung firmware and therefore general view your Galaxy S3 will not change completely.

    This is what the Galaxy S3 interface will look like with this firmware:


    The firmware is available for download.

    Instructions
    If you have already chosen the appropriate firmware for your requirements, great. Now we move on to the installation stage.

    It's quite simple, but you must follow every step of the instructions unconditionally.

    There are 2 options available to you:
    1. If you have installed ClockWorkMod on your Galaxy S3.
    Then installing the firmware is greatly simplified.

    • 1). Download the archive.
    • 2). Copy it to the root memory of your smartphone.
    • 3). Then launch CWM by pressing three keys in the following order: UP + POWER + HOME.
    • 4). Select Install ZIP from SD Card ( ZIP installation from the memory card) and select the firmware file.
    • 5). Make a complete memory wipe: Wipe cache partition/ wipe dalvik cache / factory reset.
    • 6). Restart your smartphone.

    If you did everything correctly, your smartphone should reboot in a few minutes. If this does not happen, then repeat the operation, starting from the second point.

    When the phone boots up and starts functioning, you may need to install GAPPS. This is a set Google applications (Play Store, Gmail, etc.). To install GAPPS, do the same until step 4 and select the GAPPS file.

    That's it, Galaxy S3 can celebrate its new birthday.

    2. If you haven't installed ClockWorkMod on your Galaxy S3 yet.

    Install ClockWorkMod and go to option 1.

    How to flash Galaxy S3?



    Very often, owners of a Korean smartphone Samsung strive to increase the productivity of the device and its functionality due to flashing. Software updates help improve technical specifications gadget. In this article we will look at how to flash a mobile phone on Samsung example Galaxy S3.

    How to flash a smartphone yourself

    Before starting work, charge your phone (preferably to maximum) and make a backup copy from it important information. To follow the instructions, you will need a computer or laptop with a connection to global network, as well as a USB cable.

    1. The first step is to download the flashing program to your computer (this article assumes the use special program Odin), latest version firmware for the phone model of interest and a set of drivers for the smartphone (for example,). For convenience, place all downloaded files in one folder.
    2. To avoid unexpected situations during a software update, we recommend disabling Anti-Virus for the duration of the procedure.
    3. It's also worth turning off Kies program(if it is installed).
    4. After downloading, install everything necessary programs to the computer. Unzip the firmware file.
    5. Next, you need to manipulate the smartphone, namely, switch the phone to download mode. To do this, turn off the device and simultaneously press the following buttons - Menu (Home), Power and Volume with the slider up. Wait for the withdrawal information message to the screen mobile phone and press the volume key (up slider) again.
    6. After these steps, connect mobile device to a computer using a USB cable.
    7. Run Odin program, then click on the PDA button and select the firmware file.
    8. Next, click the "Start" button and wait until the software installation is completed. Typically the firmware process lasts about five minutes. During this time, it is important not to disconnect the phone from the computer.
    9. Once the operation is completed, a “Pass” or “Reset” message will appear on the smartphone screen, and then the phone will reboot.
    10. Disconnect your mobile phone from your computer, close the program and use the flashed smartphone.

    It is worth noting that contacting service center updating the software will entail considerable costs.

    Flashing a mobile phone yourself should not be difficult if you strictly follow these instructions. However, we warn you that if you are not confident in your abilities, then it is better to entrust the operation to professionals. Please note that the editors are not responsible for incorrect actions taken by the user.

    You can find it in our section.

    Read more: