Installation and configuration of satellite TV mts. Self-installation and configuration of satellite TV mts

Currently, MTS, in addition to services mobile communications and the Internet, offers its customers a television service. By installing a satellite dish, you can watch programs from all over the world. You can use the device not only in the city, but also in the country or in country house anywhere in the country, since it is difficult to find a place on the map that is not within the company’s coverage area. Installation and configuration satellite dish MTS can be produced either independently or with the assistance of specialists. Special difficulties this procedure doesn't call.

Key advantages of the device

The MTS satellite antenna allows the user to receive the following benefits:

• Thanks to modern technologies and use the latest materials, signal satellite television received by the antenna remains stable, regardless of where the receiver is located: in the city or outside its boundaries;
• You can install and configure the MTS satellite antenna yourself, since it does not require any special knowledge and skills;
• Large package of channels available. The user can choose from sports, science, children's channels, as well as channels for business and entertainment;
• Together with the antenna, a compact set-top box and a 3G modem with a wide range of functions are supplied that allow you to watch satellite TV in HD format and change the angle of its location for best quality reception;
• You can manage device settings without any additional devices. A built-in WiFi access point is sufficient;
• The ability to use the Smart TV function (if the TV has such a function), which is achieved due to high bandwidth channel mobile internet(as a result, the data transfer speed can reach 1 GB per second);
• Possibility to record interesting program, if you can’t watch it live.

To take advantage of the listed advantages of MTS TV, you should purchase and properly configure a satellite antenna from MTS.

Composition of the MTS TV set

The list of devices that allow you to take advantage of all the benefits of mobile satellite television includes:

• A receiver, which is essentially a 3G modem. He must provide stable connection with the Internet, and also be able to receive and process HD signals. Instead of a modem, you can use a set-top box of a certain modification or the TV itself, if it is equipped with the appropriate devices;
• “Dish”, which receives a signal from a satellite;
• Converter. Its task is to process the signal and transmit it to the TV. If it does not work correctly, the image will be unstable or of poor quality;
• Devices for attaching a satellite dish. In addition to reliability, they must be able to change its angle to ensure stable reception of various channels;
• Cable connecting the antenna and TV.

Pay attention! It is recommended to purchase the entire assembled kit from official sellers. Since the device is technically complex, it is covered by a warranty, and if you buy it cheaper secondhand or on the market, you may encounter problems during operation. In addition, purchasing the entire kit from an official seller guarantees its assembly (all elements match) and significantly saves installation time.

Preparatory stage

Before setting up satellite television, you should take a number of steps:

• Locate the satellite. For this it is recommended to use special program“SatFinder”, which can be downloaded from the website of a service center or a specialized store;
• Select the location where the antenna will be installed. The ideal place is the roof, since there you can rotate it around its axis and change its angle to ensure stable signal reception. In addition, the higher the device is located, the fewer various obstacles that create interference are encountered on its path, which also improves the signal quality;
• Collect all devices in unified system. After the antenna is assembled, you can begin installing and configuring it yourself.

Before installing the device on the roof or other selected location, you should prepare all fastening devices (they are supplied in the kit) and the necessary hardware (screws, dowels, nails, etc.), and also check the plug connectors for connecting the system elements to each other .

Antenna installation

The quality of the signal will depend on how correctly the “dish” is installed, so this issue Maximum attention should be paid so as not to redo the work in the future.

The installation sequence is as follows:

1. Determine the place where the “plate” will be attached. If the device is mounted on a wall, then it should be possible to direct the antenna mirror to the south. When installing on a roof, it is recommended to ensure that there are no taller buildings or structures in sight that could interfere with the signal;
2. Assembling the device in accordance with the requirements of the instructions. All elements must be securely connected to each other;
3. Installing the bracket for attaching the “plate”. To do this you will need a drill and reliable dowel nails. Using a drill, you need to drill holes in the surface where the device will be attached, and then use dowel-nails to fix the bracket on it;
4. Attaching the satellite dish to the bracket. It is not worth fixing it completely, because when setting up installed antenna you will need to rotate it to improve the signal quality;
5. Assemble the converter and point its head at the satellite. The final step is to connect the cable to the outdoor module of the device with set-top box.

After this, you can proceed to setting up the antenna. To do this, you will need to check all cable connections and turn on the set-top box to the network.

System setup

It is quite possible to set up MTS television yourself. This stage should be started only after the installation of the dish itself has been completed and its direction towards the satellite has been checked. Before you start setting up your television equipment, you should connect the set-top box to the TV using special cable and a separate plug. If there is a cam module included, it should be installed directly into the TV.

If all steps to install the device were completed correctly, the equipment will be configured automatically. The user only needs to perform the following actions:

• install the SIM card into the appropriate slot of the set-top box;
• start the 3G signal analysis process, wait for this process to complete;
• authorize the equipment, while viewing channels must be allowed within 5 days (before the end of this period, all required documents must be provided to the operator);
• create a user profile, set age restrictions if necessary;
• configure the channels; after completing the search procedure, a list of them should appear on the screen.

Important! To figure out how to install the MTS satellite dish yourself and how to set up stable signal reception, it is recommended to use the instructions. If you have any questions, you should contact a specialist who can always suggest ways to improve signal quality and answer other questions. Authorization is carried out in two ways: via SMS or calling the operator.

So, independent installation and configuration of MTS TV is quite possible. You can find out how to install the device from the manufacturer's instructions or by watching various videos on the Internet. They clearly demonstrate the process of assembling the elements of the device, the order of their connection to each other and connection to the system. One of the most difficult procedures is the installation of the satellite mirror itself. To ensure a stable signal, it has to be rotated frequently. This requires an assistant who will change the position of the “plate” while the user evaluates the quality of the image on the TV screen. If any difficulties arise, you should immediately contact service center. This will avoid serious equipment failures and situations that will void the warranty.

Video

The satellite television operator MTS appeared quite recently, but is already loved by subscribers due to the low cost of connection, a large list of programs and inexpensive subscriber services. But the stability and reliability of the system depends largely on high-quality installation and qualified configuration.

Visibility in a south-eastern direction and a clear horizon are the main conditions for connecting an MTS television set.

The channels are supplied from the ABS 2 satellite, hovering at 75 degrees East longitude. To view programs you will need:

• Antenna size 60-90cm.
• Linear converter.
• Coaxial cable.
• Connectors.

Moscow and the Moscow region are in the zone confident reception satellite Standard size antenna is 60cm. By increasing the dish to 80-90cm, it will be possible to achieve stable signal reception in bad weather conditions: snowfall, rain, cloudiness. The section "Coverage map" presents the signal distribution throughout the Russian Federation and indicates the reception power in each region. The map will help you choose the plate size.

We will divide the installation and configuration procedure of MTS TV into several stages.

Stage 1. Determining the direction of the signal

The procedure can be performed using a compass or a program from the Internet. DISHPOINTER is suitable for a PC; for a phone you can use SATFINDER program(can be found at Play Market or App Store). The operating algorithm is as follows: enter the address of the installation location, select the name of the satellite (ABS 2 75EAST) and using the colored arrow the signal from the satellite will be shown relative to the connection location.

If we choose a compass, then we focus on the southeast. The program shows a more accurate signal direction superimposed on a map of the area. Depending on the direction of the signal beam, the antenna can be installed either from a building window or on the roof. Tall buildings and trees located at the level of the dish can interfere with reception. You can also navigate by the sun: around 10 o’clock in the afternoon it shines in the direction of the satellite.

Attention! Only a specialist, after visiting and measuring the signal, guarantees satellite reception! The cost of the service is 1000 ₽.

For independent measurements we use satellite set-top box, where there is a scale of level and quality of reception.

Stage 2. Assembly and installation of the satellite system.

We assemble the plate and install the converter on it, strictly following the attached instructions. We attach the bracket to the vertical wall of the facade or the roof of the building. Installation to brick and concrete surfaces is carried out using M10 anchor bolts, to wooden surfaces - 10mm screw caps. When there are voids in the wall, a through hole is drilled and studs are installed.

The antenna is mounted on a securely fastened bracket so that the dish is difficult to rotate on the support. We measure the required length of the cable, strip it as in the photo, and install the connectors. We pay careful attention to the cable braid: it should not come into contact with the central core.

We align the antenna in the direction of the satellite (use the program) or in azimuth (direction to the satellite in the horizontal plane) and elevation (the angle between the horizon line and the direction to the satellite in the vertical plane). Data for the Moscow region: azimuth: 137.3°, elevation angle: 18.3°. We find information for your region on the GEONAMES map.

Stage 3. Setting up the antenna for the satellite​ ​

This operation can be done using a sat finder or receiver. Recommended MTS receivers have a signal level and quality scale set to required frequencies. Channels can also be received on non-recommended devices, but then it is better to configure the set-top box in advance. This can be done when purchasing a system in a store, or from neighbors who have a working MTS dish.

Manual setting performed using the following data:

• Satellite ABS 2 75 EAST
• Feed settings: upper local oscillator 10600 MHz, lower 9750 MHz.
• Transponder: 11800 V, flow rate 45000, error correction 2/3. (see list of MTS frequencies)
• Network search- included. This will help you find the entire list of programs.

We enter the settings menu, two scales appear in front of us: level and quality of reception. Stable job satellite is possible with the maximum filling of the scales, which should not be lower than 70%.

The procedure for setting up an MTS TV dish to a satellite

• We point the antenna at the area where the satellite is located (we focus on azimuth and elevation, according to the signal direction program).
• We tilt the plate below the horizon by -8°.
• We set up the converter: if you look at the feed from the antenna side, then with a positive value we turn it clockwise, with a negative value counterclockwise, to the -22° mark.
• Slowly turn the antenna 1-2mm, wait a couple of seconds, look at the signal scales on the screen; repeat the operation until the scales begin to fill.
• We achieve at least 70% completion of the scales.
• Fix the plate, tighten the bolts Call an MTS setup specialist

If you were unable to set up the equipment yourself or there were breakdowns in the already connected antenna, we recommend using the services of MTS television repair and installation specialists.

Call an MTS setup wizard

If you were unable to set up the equipment yourself or there were breakdowns in the already connected antenna, use the services of MTS television repair and installation specialists.

What you need to do before buying satellite TV

Satellite broadcast kits beckon nice price, everyone who makes purchases in a shopping center, or enters branded cell stores MTS, we have long seen advertising signs about satellite television with attractive prices. On New Year's Eve, the cost of the set is St. Petersburg and the Leningrad region was 2990 rubles. When compared with the popular provider Tricolor, the cost is more than double. The first thing you need to do is determine whether you can install satellite television. We download an application with a compass to our smartphone, set it up, and check in which direction we need to adjust it, namely 75 degrees east longitude. It will also be convenient to use the SatFinder application; in the settings you need to select ABS 2 - 75 E. It is important to note that there should be no tall trees or houses in the direction of the satellite, at a distance of 150 - 200 meters. Thanks to the data obtained, you can easily determine whether it is possible to install television in your home.

The cost of installing an MTS satellite television set is 2990 rubles

Included in the price – installation, mounting for bracket, wiring open method, assembly, installation, antenna tuning. The cost of departure is 30 rubles/km.

2. What tools are needed for installation

We have a freshly purchased satellite television set, cable, set-top box or cam module. You can start installation. But before installation you need to check if you have everything necessary tools. What do we need?

1. Open-end wrenches for 10 and 13. They will be needed for assembly and its settings. Assembly is carried out according to the diagram attached to the kit. It will be more convenient to use wrenches with ratchets.
2. A knife, any construction or kitchen knife is suitable for installing F connections on a coaxial wire.
3. A hammer drill or screwdriver for installing the bracket on the wall of a building.
4. A building level, or an excellent eye, the bracket must be installed strictly vertical to ground level. It must also be very tightly secured so that it does not come off.
5. All necessary fasteners to install the bracket to the wall. For a brick wall, an excellent solution would be to install plastic dowels; for a wooden wall, plumbing bolts with a 13-mm head and a length of 600 mm.
6. The Satfinder device is best rented or purchased, you need to take into account that cheap analogue dial instruments have poor sensitivity, and it will not be possible to accurately adjust them.
7. Patience is probably the most important thing you need. Be prepared for the fact that you may not be able to adjust the antenna the first time.

3 .How to set up an MTS antenna for a satellite

There are two ways to set up a satellite dish, the first is using a set-top box, the second is using a satellite finder. Let's figure out which method suits us. The converter rotation angle is -22 degrees for the Leningrad region, in both cases settings.

1 Antenna setup using the set-top box

First of all, we connect the antenna and the set-top box using a pre-prepared coaxial wire, with F connections crimped at the ends, we connect the TV and the set-top box HDMI cable. We connect the TV and set-top box to the network, and turn on both devices. The green LED on the console should light up. Next, go to the Settings Menu, 2 parameters will be displayed there: signal strength and signal level, the first shows whether you have connected correctly coaxial cable To satellite converter, the second displays the signal level. If the signal level is 95%, we begin to slowly rotate the plate with the hope of getting maximum level signal. In this case, the TV must be in the field of view of the tuner, which is not always possible. The disadvantage of this method is that you will tune in using one transponder located on the satellite.

2 Setting up using a professional device

To configure using the device, we will need a 2 meter coaxial wire, with crimped F connections, one end of the wire is connected to the device, the other to the satellite converter. In the device we select satellite dishes, just like in the first case we will have 2 scales, but in addition we will have the ability to select transponders, thanks to this we can configure the dish with the highest quality possible. There is only one downside to this method: it is possible to drop the device for tuning, and get into an unpleasant situation if you rented it. Since its cost is not comparable to the cost of installation by a professional.

4. How to configure the satellite CAM module

Buying CAM module MTS, the first thing you need to start with is to make sure that your TV supports S2 encryption and whether it has the ability to connect a module. For each brand of TV, there are many ways to install a cam module, from automatic to manual. Let's consider manual using the example of a Samsung TV, which does not have an automatic mode for the provider.

1 The first thing you need to do is reset the TV to factory settings, go to the support menu item, select reset, and perform it.

3 Now select the LNB item, here we need to set the upper frequency to 10600 and the lower to 9750, the 22KHz tone is turned on, the polarization is linear, save.

4 Go to the manual setup menu and select create a transponder. A menu with the characteristics of the transponder will appear, then enter the following characteristics: Frequency 11913 MHz, data transfer rate 45000 Ks/s, vertical polarity, then save.

5 We get back to the satellite search menu, here you need to enable network search - this prerequisite! If you did everything correctly, a percentage display of signal quality will appear, click search and enjoy watching satellite television. If something doesn’t work out, repeat all the steps starting from the first point.

5. Choosing a master

We advise you to pay attention to the guarantees provided by the professional who undertakes the work of setting up and installing your satellite dish. Professionals in St. Petersburg and the Leningrad region will warn you that the chances of successful installation, are extremely small. Statistics from our company: out of 10 orders, it turns out to deliver only 2, which is equal to 20 percent. Our company provides a lifetime installation guarantee

6. Pros and cons of MTS satellite television

Let's look at the pros and cons of television; let's start by focusing on the pros.

1. The price is tempting; there are no satellite TV sets on the market at more reasonable prices.

2. Cost subscription fee only 1200 rub. per year, which is cheaper than Tricolor TV.

3. Good service support and service.

Cons, how could we live without them?

The most important disadvantage in St. Petersburg and the Leningrad region is installation, since the satellite is located very low, compared to e36, it is often simply impossible to configure. The way out of this situation is installation on the roof, but not everyone is ready to pay for such work, since the price tag can exceed the cost of the kit by 3-4 times.

7. List of MTS transponders, broadcast frequencies

Today, MTS, in addition to mobile communications and Internet services, offers customers the opportunity to enjoy watching TV shows via satellite TV. Digital television of this operator capable of working both in urban environments and in populated areas outside the city. Almost the entire territory of our country falls under the MTS coverage area. This means that setting up a home satellite MTS antennas can be produced in every region of Russia. This fact confirmed by successful work over the course of 2 years.

Priority parties

Installing and configuring an MTS satellite dish at home guarantees the user:

1. high-quality signal regardless of the location of the system installation, be it a city or a rural area;
2. quick and easy installation, without any technical difficulties;
3. use of a convenient package of channels, which includes sports, educational, entertainment and news channels;
4. a compact modification of the set-top box with many functions, capable of supporting signals in HD format and controlling angles using a 3G modem;
5. management of telecommunication parameters using the built-in WI-FI points without additional devices;
6. management of Smart TV service mode mobile traffic With high speed 1GB in size;
7. the presence of a recording option that allows you to record a program without reference to a set time.

To use the listed opportunities, you need to opt for MTS TV. You will also need to properly configure the installed equipment.

Set of MTS TV system devices

The MTS television system, like satellite television of other operators, consists of a certain set of devices and materials. The kit includes:

• receiving device - this can be a set-top box with a 3G modem for connecting to the Internet, a TV set-top box capable of receiving HD signals, and a modular TV device;
• satellite dish;
• converter device;
• fastening elements for mounting the antenna;
• cable products to the antenna.

When the package is completely assembled, you can install the plate and try to configure the system. To do this, you can seek help from specialists or try to do it yourself.

Preparation stage before installation

Before you install a satellite TV system yourself, you need to carry out preparatory steps. They include:

• establishing the location of the satellite using the “SatFinder” application, downloaded from mobile service store;
• determination of mechanical obstacles in the path of signal reception - it is better to install the dish on the roof to be able to rotate around its axis and reduce the influence of physical obstacles on the signal;
• completing the system configuration.

In addition, you need to prepare:

• plug connectors;
• installation tool;
• hardware products for fastening antenna elements.

We need to pay attention! Experts recommend purchasing a standard set of devices and materials offered to customers by MTS. This will make it easier to assemble the system.

Installing the plate

The antenna installation algorithm is as follows:

1. In choosing a place to mount the plate. It needs to be mounted on the wall so that it is possible to freely direct the mirror to the south, since our country is located in the northern part globe. If the dish is mounted on the roof, then you need to make sure that the view is not blocked by taller buildings and trees;
2. In assembly. On a flat and clean area, assemble the plate structure, securely connecting the elements together, according to the manufacturer’s instructions;
3. In marking the place for attaching the bracket and drilling holes, and in fastening the bracket;
4. In fixing the satellite mirror to the installed mounting unit. The antenna should not be completely clamped with bolts, as it will have to be rotated to improve the quality of the received signal;
5. Assembling the converter, pointing the head at the satellite and connecting of this element cable with TV set-top box.

Setting up system equipment

After the antenna setup is completed and the dish is pointed at the satellite, you need to move on to setting up the TV equipment. To do this, you need to connect the set-top box to the TV using TV cable and plug. If the system includes a cam module, then you need to insert it into a special connector on the TV without an access card.

The MTS TV set-top box is configured independently using this algorithm, you need:

1. insert the SIM card into a special “slot”;
2. carry out initialization and analysis of the 3G signal until the process is completed;
3. undergo equipment authorization - before the operator receives the original signed documents, the channel viewing service must be open within 5 days;
4. create a user profile - in the “Access Level” section, indicate age and create an access code;
5. search for TV programs - at the end of the process a list of found channels should be displayed.

Important to know! It is better to configure MTS satellite TV under the supervision of a specialist. He will tell you how to properly improve the signal quality and set channel parameters. You also need to remember that authorization of the system is carried out in two ways: through an SMS message or a call to the operator.

Method for setting up a cam module

The procedure for setting up this type of equipment consists of the following steps:

1. Disconnect TV receiver from electrical network;
2. Insert the element into a special port - before installing the cam module, you should carefully examine the contacts of the port and connector; they should fit together easily;
3. Install the smart chip into the TV module with the side with the code facing the sticker with the TV logo;
4. Connect the TV to the electrical network and make sure from the information on the screen that the system is assembled correctly;
5. Enable signal reception mode in formatDVB— S2 and configure the following characteristics to watch satellite channels:

• satellite name – ABS2;
• modulation type – DVB-S2, 8PSK;
• reference/home transponder at frequency – 11913MHz;
• LNB local oscillator at frequency – 10600MHz;
• set LNB polarization to linear-vertical position;
• set the symbol rate to 45 Msymb/sec;
• LNB power supply must be in “on” mode;
• 22KHz tone should indicate "on" mode;
• select “fast” or “network” search option.

1. To set the TV to home digital MTS channels you need to select a mode DVB-C reception signal and perform the following actions:

• select “network” or “fast” search;
• set the frequency of the received signal at 298000KHz;
• select QAM64 modulation;
• set symbol rate mode.

Setting the above parameters will allow you to correctly configure the satellite dish and get a high-quality picture on the screen along with sound. If this does not happen, then you need to call the support service and consult with specialists.

Want to watch the best TV channels without being tied to cable? Satellite TV will certainly interest you. By installing the dish, you can enjoy your favorite TV shows in the highest quality not only in your city apartment, but also in a country house or country house. One of the best providers satellite internet is the MTS company. It has been providing the service for more than 2 years, and its service can be used almost throughout the entire territory of Russia, with the exception of the polar regions.

Satellite TV set

Almost every satellite dish owner will strongly recommend that you contact installation and configuration specialists. But situations in life are different and it can often happen when, due to your remote location, the master will not be able to get to you soon, or his services are very expensive. In this case, you can try to install and configure the MTS satellite dish yourself.

In this material we will tell you about the features of the satellite TV service provided by MTS. In addition, you can learn how to install and configure the antenna without anyone's help.

As already mentioned, you can watch satellite TV from MTS in almost all of Russia. What can you expect when connecting?

1. Almost universal availability - it is possible both in a city apartment and in a country villa or country house.
2. Fast and easy connection. In most cases, you don’t even have to delve into technical difficulties, because everything will be done by the company’s technical specialists.
3. You won't get confused by the abundance television channels, since the package of services provides the most interesting and high-quality ones. All channels are divided into categories: sports, news, entertainment, children's, music, as well as channels with video high quality. Various advertising channels are simply absent, so you will not pay for unnecessary information junk.
4. Compact yet multifunctional TV set-top box. It supports channels in HD quality, and also has a built-in 3G modem for remote control services.
5. Built-in point Wi-Fi access will allow you to refuse additional equipment, since all the necessary telecommunications capabilities will be provided in one building.
6. The service package includes 1 gigabyte of high-speed mobile traffic for use and management Smart function TV.
7. The broadcast recording function, as well as delayed viewing, will allow you to avoid being tied to the live broadcast. Recorded programs can be viewed at any other time convenient for you.
8. Many additional interactive online services: TV program guide, weather, news.
9. Very convenient feature"TV Guide", by turning on which you can find out what's on at the moment available live and also find out additional information about a broadcast program or film.
10. The ability to watch new films on demand, without waiting for them to air on television.

Required equipment

If you decide to install and configure all the equipment for watching MTS satellite TV yourself, you will need the following equipment:

• a television set-top box, complete with the necessary cables, as well as a remote control;
• satellite dish;
• bracket for mounting on a wall or roof;
• converter satellite signal;
• antenna connection cable;
• two F-type connectors;
• working tool.

Antenna installation process

Since the quality of signal reception directly depends on how you install the antenna, carefully weigh your options and, if you have any doubts, ask for help from professionals. If you are confident in your abilities, let's get started with the step-by-step guide.

1. Selecting an installation location. To begin with, it is worth mentioning that any satellite is located in low-Earth orbit, as if hovering above it in the equator region. Since Russia is located in the Northern Hemisphere, the satellite dish should be facing south. If you live in an apartment, then you need to install the antenna near a window facing south. If it is not there, you will have to install the antenna on the roof and run the cable to the window. In this case, you are unlikely to be able to do without an assistant. If you live in a private house, simply install the antenna either on the roof or on the south side of the house. Be sure to take into account that the dish must be in the line of sight of the satellites, that is, there should not be other high-rise buildings or tall trees around, which will certainly interfere with reception. If there is a neighboring house or tall trees near your window, place the antenna on the roof.
2. In a convenient place, assemble the satellite dish using the instructions. There is usually nothing complicated, but the design of individual models may differ slightly, so if problems arise, look for a solution on the Internet or contact a professional. The structure must be connected securely, but try not to twist anything, since by applying extra effort, the equipment can be easily damaged.
3. Now let's proceed to installing equipment for receiving satellite signals. As we already indicated a little higher, make sure that the antenna is not blocked by the branches of tall trees and looks strictly south. And also always remember about safety precautions, since most likely you will have to work at height.
4. Place the bracket against the surface you are going to attach it to, mark where you need to drill the holes, then drill those too and attach the bracket with the bolts. The attached bracket should sit monolithically, like a wall element.
5. Attach satellite dish to the bracket, but under no circumstances tighten all the bolts. Why? You still have to do fine tuning equipment and rotate it to receive the signal of maximum quality.
6. Next, attach the converter and connect the cable to it, which you then insert into your apartment or house. By the way, you need to think in advance where the cable will enter. Therefore, you will need to drill a hole in the wall or window frame.
7. It is very important to correctly point the receiver head at the satellite. A deviation of even a few centimeters can lead to incorrect operation equipment. How to choose the exact direction? There are 2 methods available:
   • On the MTS website, go to the Satellite TV - Settings - Coverage Map and Settings Wizard section. You should indicate your address in it, after which you will be able to see a map of the area with an exact indication of the direction in which the antenna is rotating.
   • In the menu of the set-top box that you will use to connect to the service, go to the menu item Settings - Antenna Settings. You will be offered a list of cities in which you need to find yours or the one closest to yours, after which a compass will be displayed on the screen indicating the required angles. Using a conventional mechanical or electronic device on your smartphone or tablet, set the direction of your antenna.

1. Connect the satellite dish cable to the set-top box and make further settings.

Antenna settings for satellite signal reception

1. Turn on the set-top box, wait for it to fully start, then open the menu item Settings - Antenna Settings. You will see a scale that displays the signal level that is received by the antenna. Rotate the antenna until a green line appears on the scale, indicating that you are moving in the right direction.
2. Make sure that the signal is of maximum strength and fills the scale as completely as possible. Only after this can you attach the antenna and begin authorizing the equipment.

ADVICE. It is best at this stage to have an assistant who can either rotate the antenna or monitor the signal level on the screen. Agree, constantly running between the window and the room is not very convenient. And if the installation is carried out on the roof, then it is almost impossible to do everything yourself.

MTS TV menu

Receiver setup

The very first thing you need to do is authorize all your connected equipment. Otherwise, MTS satellite television services will not be available to you. Since the set-top box has a built-in GSM module and can transmit data via the Internet, make sure that this function is activated.

Provided that the GSM module is active and the data transfer function is enabled, the equipment will be authorized in automatic mode. If any of them is not available at the time of activation, you will have to use one of the following options:

• sending SMS messages;
• call to contact center MTS company.

Regardless of how you authorized the equipment, MTS must receive a signed package of documents. If you do not conclude an agreement, the service will only work in demo mode with basic set channels and without connectivity additional packages and services. Therefore, make sure to submit the package of documents on time and conclude an agreement for the provision of satellite TV service. Once the contract is concluded and the services are paid for, as well as the package of TV channels is activated, you will be able to use all functions and services without restrictions.

Conclusion

If you decide to connect and configure equipment for the MTS satellite TV service yourself, you have excellent instructions. If you have even the slightest doubt or something doesn’t work out, it’s better not to split hairs and turn to professionals who have done similar work more than once. If you damage the equipment, you will lose much more money than you could pay the technician. If you still have questions, ask them in the comments at the bottom of the page.