Launching BIOS on a Samsung laptop. How to enter Bios on a Samsung laptop

Of course, not all owners of computers and laptops need to enter the BIOS. However, more advanced users need to know how to start the BIOS. Logging on a laptop is significantly different from starting the system on regular computers. Moreover, the process depends on the device model. For some, the procedure is not particularly difficult, but for others you will have to tinker. The latter also include models Samsung.

Entry combinations can consist of one, two or more keys. On Samsung models, the layout is often limited to the F10 button. This complicates the situation, since the F12 key is often needed to launch the BIOS. In order to get out of the situation, it becomes necessary to switch the Fn layout, and not everyone can do this. Today we will talk about how to get into the “BIOS” on Samsung laptop. But first, you need to study the issue in more detail. Let's start with what a BIOS is in general.

Operating system "BIOS"

The abbreviation "BIOS" stands for " Basic System Input/Output". This is a microcircuit with memory installed on the motherboard of the device. In order for the microcircuit to function, a battery must be present. The BIOS contains information that makes it possible to test and boot the computer.

If the laptop or computer works normally, boots and reboots, then there is no need to log into the system. However, if there are any problems, the reason may be precisely the failure of the BIOS. It is also needed to reinstall the operating system. The main task of the BIOS is to have a boot menu (Boot Priority).

How to enter BIOS on a Samsung laptop?

Next you can move on to main topic our article. Follow our instructions exactly and entering the BIOS will not take much time and effort. Not everyone who has launched BIOS knows how and what to do next. We will tell you about all this today.

Note: On some models, information about the motherboard is indicated on a special sticker attached to the back of the laptop or to the battery compartment.

“BIOS” is the basic system of any computer device. Its task comes down to testing the equipment before loading the operating system. Even though your laptop is a Samsung laptop, the button to enter Bios may not be the same (F2, F12, F8, Del, Esc). This depends on what brand motherboard is used for this device.

The commands for entering the BIOS on laptops can certainly be different, even from the same manufacturer. This is due to the fact that each of them has various models motherboards.

You will need

• – skills in working with the BIOS system.

Instructions

1. When you turn on your laptop, press the Pause key to view text on the screen. Pay attention to the inscription Press F2 to enter setup. Instead of F2, of course, there can be any key or even a combination of several. The most common of them are F1, F2, F8, Esc, F10, F11, F12 and so on. You can also use the selection method. To exit pause mode, press Enter.

2. Search the Internet for information about the motherboard model. In order to find out its markings, open the computer properties by right-clicking on the corresponding Start menu item. In the new window that appears, select the “Hardware” tab.

3. Open device manager and find your motherboard in the computer configuration list. Rewrite its name, open a browser and execute a request using the rewritten information, and you can add to enter setup/BIOS in the search bar.

4. Also, some old models have information about system board computer on a special sticker on which the laptop model is written, check the back wall of the computer for its presence. Also check the battery compartment by removing the battery beforehand.

5. With the BIOS program open, use the arrow keys to navigate through the menu options. The plus and minus buttons are usually programmed to change one or another parameter value, but everything may depend on the model of the motherboard.

6. Be extremely careful when making changes to the BIOS parameters, since this program is responsible for the operation of each content of the laptop. If, after saving, any difficulties or tasks appear in the operation of the laptop, restore the initial values ​​using the appropriate command written at the bottom of the BIOS system window.

Modern monitors allow the user to make adjustments to the image and other parameters independently, through the control system. The method of metamorphosis and adjustment of settings is the engineering menu.

You will need

• Control panel.

Instructions

1. Turn on the TV. Click step by step info-menu-mute-power. This combination will fit most PDPs and LCD TVs. But some models, exclusively with a diagonal of up to 23 inches, do not respond to this sequence. They have a different combination - MUTE-1-8-2-POWER ON. It is necessary to note that all these keys must be pressed step by step and as quickly as possible (no more than 1-2 seconds for everything). If you don't succeed the first time, try again. A window with the heading “Service Menu” appears in front of you.

2. Navigate the menu using control buttons (right, left, down, up). In order to select the exciting section, click the “OK” button. To access the upper tier, press the “Menu” button. Design engineering menu Every year it changes, new platforms and firmware are released, but the main parameters remain unshakable: - Panel On Time - the first line indicates “panel operating hours”. - Ready - turns on and off the DTV tuner (ON and OFF, respectively). - Option table - does not depend on the input and is responsible for the general settings of the TV. - Shop Mode - shop mode (ON - disabled, OFF - enabled). - Dimm Type - information about the matrix that is installed on your model. - Reset - reset settings.

3. Make adjustments to the settings. Before doing this, think carefully about whether it’s worth it. If you change some parameter abnormally, you can completely reset all the settings, after which you won’t be able to figure it out without the help of a wizard.

4. Save your settings. If you want to restore standard (factory) settings, run the “Reset” command.

5. Turn off the TV to exit the engineering menu.

6. If after adjusting the settings the image deteriorates or other problems appear, go back to the menu and load typical installations(Reset).

Replacement software motherboard allows you to improve the efficiency of your computer and add new capabilities related to its configuration. This process should be performed only after careful preparation and reading of the necessary instructions.

You will need

• – Firmware file;
• – program for firmware.

Instructions

1. If you have already updated the BIOS and want to restore its old version, then download necessary firmware. To do this, it is better to use the official website of the manufacturer of the motherboard used. If you work with a laptop, then visit the website of the developer of this model of mobile computer.

2. Download the firmware program and the required software version from there. If you haven't found the initial BIOS version, then download more new firmware, which differs minimally from the original one. Traditionally, websites indicate the release date of the firmware.

3. Before starting the software change process, reset BIOS settings. To do this, open this menu after restarting the computer. Select Use Default Settings or Reset CMOS and press Enter. Confirm the operations by pressing the Y key.

4. Make sure you have the right power source. If you are using a laptop, then charge the battery and connect mobile computer to the power grid. When working with desktop computer better to use the source uninterruptible power supply. If it's not there, then do it. BIOS firmware at night. This will reduce the likelihood of power outages.

5. Later loading operating system run the flashing program. Its name depends on the motherboard model and manufacturer. Select the required firmware file and click the Start button. Wait for the software update. The computer can be mechanically rebooted either in time for this process or after it is completed.

6. Open BIOS menu and make sure everyone is available required functions. Configure your computer's operating parameters. Save metamorphoses and restart your PC.

Video on the topic

Dispatcher devices is one of the Windows management console snap-ins that contains information about installed equipment and the sources allocated for it. With the support of the dispatcher, you can determine what is not working correctly. devices oh, update the driver or change the hardware settings.

Instructions

1. Open dispatcher devices allowed various methods. Call the drop-down menu by right-clicking on the “My Computer” icon. Select the "Properties" option and go to the "Hardware" tab. Click the button Dispatcher devices ».

2. If you went under account from the “Users” group, a message will appear stating that you do not have sufficient rights to change the hardware settings. Click the "Continue" button to open the manager devices .

3. You may prefer the "Manage" command in this drop-down menu. The Computer Management console window will open. Expand the snap-in " Dispatcher devices", by double-clicking on the icon in the list on the left side of the window.

4. Allowed to go to " Dispatcher devices» via the «Control Panel». Expand the System node double click and in the system properties window, go to the “Hardware” tab. Click the button Dispatcher devices ».

5. In the “Control Panel”, double-click on the “Administrative Tools” icon, then expand “Computer Management”. Expand " Dispatcher devices» in the management console window.

6. It is possible to run this snap-in with support command line. Open the program launch window using the Win+R combination or by choosing the “Run” command in the “Start” menu. Enter compmgmt.msc. The Computer Management Console window will open. Left-click to expand the node " Dispatcher devices ».

7. To easily run from the command line " Dispatcher devices", enter devmgmt.msc. If you work under the “Users” account, the system will display a message about the impossibility of making changes to the equipment configuration. Click OK to run " Dispatcher devices» in viewing mode.

8. You can use a shortcut key combination to launch this snap-in. Press the combination Win+Pause/Break to open the system properties window and go to the “Hardware” tab. After this, click on the button “ Dispatcher devices ».

Video on the topic

Video on the topic

Useful advice
Do not change BIOS settings if you do not know what the results will be.

Enter BIOS ordinary user It is only required to set any parameters or more advanced PC settings. Even on two devices from the same manufacturer, the process of entering the BIOS may be slightly different, since it is influenced by factors such as the laptop model, firmware version, and motherboard configuration.

The most common keys to enter the BIOS on Samsung laptops are F2, F8, F12, Delete, and the most common combinations are Fn+F2, Ctrl+F2, Fn+F8.

This is the list of the most popular lines and models of Samsung laptops and the keys to enter the BIOS for them:

• RV513. In the usual configuration, to go to the BIOS when booting the computer, you need to hold down F2. Also in some modifications of this model, instead of F2 can be used Delete;
• NP300. This is the most common line of laptops from Samsung, which includes several similar models. In most of them, the BIOS key is responsible F2. The only exception is NP300V5AH, since it is used for login F10;
• ATIV Book. This series of laptops includes only 3 models. On ATIV Book 9 Spin And ATIV Book 9 Pro entering the BIOS is done using F2, and on ATIV Book 4 450R5E-X07- by using F8.
• NP900X3E. This model uses a key combination Fn+F12.

If your laptop model or series to which it belongs is not listed, then input information can be found in the user manual that came with the laptop when you purchased it. If it is not possible to find documentation, then it electronic version you can look at . To do this, simply use the search bar - enter the full name of your laptop there and find technical documentation in the results.

You can also use the “poke method,” but it usually takes too much time, since if you press the “wrong” key, the computer will still continue to boot, and while the OS is loading, it is impossible to try all the keys and their combinations.

When booting the laptop, it is recommended to pay attention to the inscriptions that appear on the screen. On certain models you can see a message with the following content: “Press (key to enter BIOS) to run setup”. If you see this message, then just press the key that is given there and you can enter the BIOS.

How is it happening? It's very simple friends! On Samsung laptops latest models, several new options have appeared in the BIOS (“Fast BIOS Mode" And " Secure Boot"), which are directly related to the ability to boot a laptop from a flash drive or disk. Samsung Corporation suddenly decided to protect the loading of the new operating system Windows systems 8 from some virus or from the laptop owners themselves, it’s whatever you like. Naturally, many users immediately had questions.

One of my friends wanted to boot a Samsung laptop from bootable flash drive containing the program backup Acronis to do Windows backup 8, but it didn’t work out for him. Another one decided and also got stuck at the very beginning, he just couldn’t find his flash drive anywhere, neither in the BIOS, nor in the boot menu of the laptop. After he tried five flash drives, he flew to me with bulging eyes and said that his new laptop could not be booted from either the disk or the flash drive. In short, I had to figure it all out, and if you also found yourself in the same situation, read our article.

Booting a Samsung laptop from a flash drive

Then we go to Boot section, we are interested in the “Secure Boot” option,

We also set it to the “Disabled” position and press “Enter”

A warning appears about the possibility of booting the laptop with an error.

We agree, press “Enter". Below appears additional parameter"OS Mode Selection",

We put it in the position “CMS OS" or “UEFI and Legacy OS"

And press “Enter”. Again a warning appears about the possibility of booting the laptop with an error, “Enter”.

We save the changes we made in the BIOS and press “F10” on the keyboard. To the question “Save the changes made and reboot?” press “Enter”. Yes.

The laptop reboots, press F10 and get into the boot menu, select the flash drive, the Samsung laptop boots from the flash drive.

If you cannot get into the laptop boot menu, then you need to change the boot device priority directly in the BIOS. We enter the BIOS, go to the Boot section, then the option Boot device Priority

our flash drive should be here, put it first boot device, then press F10 (save the changed settings) and reboot. After rebooting, your laptop will boot from the flash drive.