• How to set up iPhone 4 when you turn it on for the first time. Initial iPhone setup

    It is necessary to configure it. Without completing it, the user will not be able to use the phone's capabilities. Many people are mistaken and think that only employees service centers Apple knows how to properly set up an iPhone. But you can save money on their services. After reading our instructions, everyone can independently activate and configure the device without any special skills.

    Selection and installation of a SIM card

    Before you set up your iPhone 7, you need to correctly install the SIM card into it. Smartphones use a nano SIM card, which is smaller than a regular SIM card. This is due to the fact that there is little space inside the device and the manufacturing company saves it on different modules. The SIM card slot was no exception.

    To install a nano SIM card into an iPhone, you need to press the hole near the tray using the special iPaper included with the gadget. You can also use a regular paper clip. After pressing, the tray will extend slightly and should be pulled out completely. Next, you need to place the card in the tray with the front side facing up, push the tray back and push it completely into the slot. Then you must enter your PIN. If there is no firmware for specific operator mobile communications, the phone will automatically detect the operator. If the device cannot detect the network, you need to go to “Settings” and select “Operator”.

    First setup steps

    Setting up iPhone 7 starts with these simple steps:

    • turning on - involves pressing and holding the power button for several seconds until a greeting appears on the screen;
    • pressing for 3-5 seconds, and then alternately selecting a language, country or region;
    • Internet connection - an active Wi-Fi network or mobile Internet is used.

    Next, you will need to select whether to enable or disable location services. Activating them will allow you to track iPhone location 7 (which is especially important if a gadget is lost or stolen), use maps and navigation applications, receive a weather forecast, etc. You can enable or disable geolocation services at any time. You need to go to Settings, select Privacy, and then Location Services.

    The Location Services feature can be turned on/off completely or for individual phone applications. Turning it off will help extend battery life.

    The next step requires you to set up Touch ID and set a password. Touch ID is a feature that allows you to unlock your phone using your fingerprint. A password protects the gadget from being used strangers and protection of personal data. To change it, you need to select the “Password Settings” item.

    Then you need to select the configuration method: “New Device”, “Recovery from iCloud” or “Recovery from using iTunes" In the second and third cases, you can restore data and accounts from services that a person used on a previous smartphone. On average, the recovery process takes from 30 to 60 minutes.

    The next step involves setting up an account that allows you to sign in to various Apple services. You can log in using your already registered Apple ID (username), create a new account, or skip this step altogether.

    If you have an account, you should log in to it by writing a username and password, which you will not need to provide later when logging into Apple services. The account allows you to download apps and music from App Store, synchronize several gadgets, make video calls between them for free, communicate in chats, etc. To receive it, you must select “Create an Apple ID for free.” Next, you will need to indicate your date of birth, first name, last name, and click “Next.”

    Please note that the account creator must be at least 18 years old, otherwise registration will be denied.

    After entering your personal data, you must provide an existing email address or get it for free in iCloud. This will be your Apple ID login. Next, you need to come up with a password, choose Security Question, write down the answer to it, and also enter backup email. Next, the system will offer to subscribe to updates and news from Apple or refuse by moving the slider. The final step in setting up Apple ID is to accept the Terms of Use. This step cannot be skipped, so you must click “I Accept.” This completes the creation of your Apple ID.

    Final setup steps

    After creating an account, those wishing to configure new iPhone 7 have the ability to connect cloud storage iCloud information, which will store backups from devices running iOS system, photos, contacts, applications.

    By going to the “Diagnostics” section, a person must decide whether the system needs to be mobile device sent a daily report to the manufacturing company on the technical and functional condition. Consent to the shipment means that the office of the gadget’s creators will regularly receive information about the operation of the hardware and software components, as well as errors and failures in it.

    When setting up your phone, you can choose whether to display data on the screen: “enlarged” or “standard.” The first option is intended for people with vision problems.

    All of these steps are optional and you can skip them, but they help you better optimize your custom smartphone and get the most out of its capabilities.

    Useful additional settings

    Turn on the Siri app

    To use the program you must be connected to the Internet. You need to select the following items one by one: Settings⇒General⇒Siri. Next, move the slider to the “ON” position. If necessary, it is possible to select a language for voice commands.

    The application can then be turned on by pressing and holding Home buttons. An image of a microphone appears on the gadget’s screen, as well as the text “How can I help?” All you have to do is voice a command or ask a question.

    You can set Siri to autoplay. To do this, you need to enable the Raise to Speak option. The application will automatically launch when you bring the iPhone to your ear.

    Installing the application

    You can install any program directly from your phone or by connecting to your computer. In the first case, the Internet must work on the iPhone. You need to go to the App Store online store, select an application and download it. After downloading, you can run the program. The second installation method involves connecting your mobile device to a laptop or personal computer with iTunes installed. After the computer “detects” the phone, you need to select iTunes store App Store, find there the right application and download it.

    Internet setup

    If the operator cellular communication provides a service of use mobile internet, you don't need to configure anything. You should go to “Settings” and select the required network.

    To access Wi-Fi, you need to turn it on via quick menu or "Settings". If a person is in an area where he has previously connected to a network available in it, the phone will automatically connect to the Internet. Otherwise, you should select the network yourself from the list of available ones. If it has a password, then to connect you must first know it.

    It is not necessary to trust store salespersons to configure phone settings Apple technology. The tips listed in the article allow you to understand how to set up your iPhone yourself. Using them, you can install a nano SIM card, set the language and country, connect to the Internet, select a configuration method, create an Apple ID, etc.

    Despite the fact that Apple gadgets have seemingly filled the entire planet, the number of new iPhone users is only growing every day. Despite the ideology of simplicity pursued by the Cupertino company, new owners of Californian smartphones need help with initial setup: what to do when starting up, how to activate the device, what pitfalls should be expected already initial stage. Let's look at everything using the example of how to set up an iPhone 5s.

    What is an iPhone?

    This section is not about the history of the device or what operating system it works, we'll talk about the phone itself and the controls on it. First, you should understand the keys. Being a multi-touch device designed for touch control, the iPhone 5s (original) has a very small number of hardware buttons. On the front panel there is a Home button (also a Touch ID fingerprint sensor). On the top end is the power/lock button (the first one you will use). On the left side there is a sound control, on the right there is a tray for a SIM card.

    First start

    As soon as you launch the “fresh” gadget, you will be greeted with a proposal to start setting up. In principle, the built-in assistant guides you through the setup process quite intuitively, but it’s still worth considering a number of points.

    • Selecting a language and connecting to Wi-Fi. The language will be suggested automatically based on where the device was purchased, but the user has the right to choose any other. To connect to Wi-Fi networks A password may be required. Alternatively, you can use the mobile network, if supported. To do this, you should initially insert the SIM card into a special tray.
    • The next stage is connection Apple account ID, if you already have one, otherwise creating a new one (Apple ID allows you to use a lot of phone functions, including data synchronization, iMessage services, Apple Music and others).
    • Create a short password to lock your smartphone (or scan your fingerprint).
    • Initial setup iCloud storage and Keychain Access (stores passwords and credit card information).
    • Enabling geolocation detection and the “Find iPhone” function (the “Find iPhone” function allows you to protect and possibly find your missing phone).
    • Activate your smartphone with your telecom provider.

    This is how you set up an iPhone 5s from scratch; for those who have already used such a gadget, it will be enough to restore from a previously created copy of the device.

    Getting to Know iTunes

    It is not always possible to activate a device via the Internet; sometimes this requires using Apple's multimedia center, called iTunes. This application allows you not only to activate the gadget, but also to manage the data stored on it.

    To activate, you need to connect your iPhone to your computer using the included USB cable and press the “Trust” button on your phone. This is all that is needed to activate the iPhone 5s; settings and further improvements can be made already on the device.

    iTunes can also be used to install applications on a smartphone and synchronize multimedia content (music, movies, books).

    Setting up iTunes on iPhone 5s is done together with Apple ID. As soon as it is created, all content distributed in iTunes Store.

    You can find a wide variety of content on iTunes. You can purchase music, films, books, and download podcasts there. You can even buy ringtones for iPhone there.

    Interface

    After activating the device, the first thing a new user will encounter is the start screen with applications. Already available on your phone preinstalled programs such as web browser, mail client, notes, phone and so on.

    Applications on the screen can be moved, deleted and organized using folders; to do this, just hold your finger on one of the icons, and then move it to an empty position, to another program (to create a folder). To delete, just click on the cross to the left of the icon. Applications can be located on several screens (depending on their number).

    There are also a number of gestures that work on the start screen. “Swipe” (swipe) to the right opens a screen with suitable contacts and applications. A “swipe” from the top edge opens the “Notification Center” (notifications from applications, incoming mail and missed calls will be collected there), as well as a screen with widgets. “Swipe” from the bottom brings up “Control Center” (it opens quick access to the player and other useful functions). A swipe from top to bottom in the center of the screen opens Spotlight, Apple's search service, which allows you to search for content both on your device and on the Web.

    iPhone 5s Features: Touch ID Settings

    One of the signature features of this is its configuration does not take much time and usually occurs before activation. During the setup process, the phone will require you to put your finger on the “Home” button (it is advisable to wash your hands before doing this) a dozen times in order to capture every angle at which you can touch the scanner (this is done for the most accurate data processing and quick unlocking of the phone).

    The smartphone is capable of storing up to five fingerprints at a time (you can add the fingerprints of your loved ones if you want them to be able to use the device too).

    Communication

    An iPhone is primarily a means of communication, therefore it has all the necessary tools for communication. The Phone and Messages apps are classic methods of communication. Apple also has tools for connecting over the Internet, such as iMessage (a tool for sending messages between devices) and FaceTime (video calls similar to those you can make using Skype).

    In addition to already built-in applications, you can also use third-party ones, which means that any social networks (Twitter, Facebook, VKontakte) and instant messengers (Viber, WhatsApp, Telegram) will migrate to the iPhone along with the user.

    Getting in touch using other VoIP services is not prohibited, that is, you can download and start using Skype on your iPhone.

    Multimedia

    The operating system on which the iPhone runs is fundamentally different from other systems. The main difference between iOS and other platforms is that it is closed file system. Because of this feature, the iPhone received many haters who were deprived of the ability to freely download any content to the phone. Apple sells multimedia content: they sell movies and TV series in the iTunes Store, applications in the AppStore and music through the Apple Music service. If you are willing to pay and be content with these services, then there will be no further problems, all three services work great and are full of content.

    If you plan to download your own movies and music, then you will again have to deal with iTunes and the synchronization function. In order to add media content to your iPhone, you first need to add it to your iTunes library, and then sync it with your phone.

    Users will immediately encounter another problem - ringtones. Ringtones for the iPhone have long been a source of ridicule, because while Android users download and cut ringtones directly on the phone without any problems, Apple users must do this on the computer, and then add them to the phone’s library using the synchronization method (it works on the same principle as adding audio, the main thing is that the track lasts no more than 15 seconds).

    AppStore

    A special feature of Apple's platform is the application store. One of the main applications that distinguishes the original iPhone 5s is the AppStore. At first, the AppStore icon on the desktop will be the most frequently pressed, since there you can find all the necessary applications: clients for social networks, replacement standard applications, navigation services, productivity tools.

    Setting up an Apple ID

    It is worth considering the process separately creation of Apple ID with and without account. If you are ready to buy applications and pay various services built into the system, you should indicate your payment information ( credit card). If you are ready to make do free programs and services, should be skipped this stage during device activation, and try to download a free application from the AppStore after activation (if you do this, the “Missing” option will appear in the menu for attaching payment data; this is needed for those who do not want to assign their credit card to their Apple ID).

    Optimizing battery life

    One of the features of all modern smartphones is working with GPS. This function allows you to determine the location of the device, which helps you navigate the area, calculate the route to work, or find devices in case of loss.

    The disadvantage is a significant reduction in the operating time of the gadget on a single charge. Therefore, although the geolocation function is necessary for the iPhone 5s, settings to optimize its operation are still worth making. First of all, go to “Settings>Privacy>Geolocation Services”, here you can disable all unnecessary programs that require access to GPS, as well as system services, such as compass calibration, collection of diagnostic data and frequently visited places.

    Another way to reduce power consumption is to disable background updates; to do this, go to “Settings>General>Content Update” and disable unnecessary programs (those that you think can do without permanent job in the background). These two simple procedures for optimizing the operation of the iPhone 5s, geolocation settings and shutdown background services, will significantly extend the life of your smartphone.

    Reset and recovery

    In this part of the article we will talk about how to reset the settings on an iPhone 5s. Despite stability and reliability, any technological product has imperfections, and the smartphone from Cupertino was not without them.

    During long-term use, installing updates and downloading large quantity programs from the AppStore often encounter problems related to the gadget’s performance, autonomy, or the operation of certain system functions. To fix them, you can contact service support or try to clean the system manually, but the best method will global cleanup and return to the original settings. Before restoring your iPhone 5s to factory settings, you should make a copy of all important data and also disable the Find My iPhone feature. Next, go to “Settings>General>Reset”. Select the desired item and enter the password. After a few minutes, all settings will be returned to those that were on the phone by default (when purchased), the setup will have to be done again (in this case, all basic data will be saved in the cloud or in your copy on iTunes, after which you can restore everything).

    Bottom line

    As you can see, setting up an iPhone 5s from scratch does not take much time and does not involve any difficulties. Moreover, this is the only more or less complicated procedure that the owner of this gadget will encounter. That's all you need to know about how to set up an iPhone 5s.

    It always seemed to me that there is nothing complicated about Apple gadgets. However, this trend is rapidly disappearing and with each new version iOS Settings There are more and more things to keep track of. In this article, we'll cover what you need to pay attention to when setting up your new iPhone or iPad.

    Don't update to iCloud Drive

    iCloud Drive is only supported by iOS 8 and OS X Yosemite, so if you use iCloud frequently and have a Mac, don't rush to upgrade to iCloud Drive until OS X Yosemite is officially released.

    Set up iCloud sync

    iCloud allows you to sync many various information. Mail, contacts, photos, files third party applications- all this can be configured and it’s better to actually do it.

    Disable keyboard and lock screen sounds

    Because they're annoying.

    Turn off recurring Messages notifications

    For the same reason.

    Enable auto-delete messages

    Surprisingly, over time, media files in iMessage can take up gigabytes free space. In order not to delete correspondence one by one, you can enable automatic removal old messages.

    Set up push notifications

    Push notifications in iOS are very amenable detailed settings. You can change the type of notification, enable a sticker on your badge, an alert on the lock screen, and so on. Moreover, you can do this for each individual application.

    Add keyboard shortcuts

    Despite the fact that more and more third-party keyboards are appearing, there are still many supporters standard keyboard iOS. If you are one of them, then take the time to set up your keyboard shortcuts. With their help, you can write entire phrases with several characters. They will save you a lot of time later.

    Increase the number of lines in the mail preview

    The standard number of lines in a preview is 2. Their number can be increased to 5. Thus, you can understand what the message is about without even going into it and immediately send it to the archive or to a specific list.

    Activate "Hey Siri"

    Despite the fact that Siri is still a rather useless thing in our area, with its help you can already find out the name of the song playing, the weather, set reminders, and so on. With the phrase “Hey Siri” you can launch Siri without even touching the gadget. You can do this in Settings → Siri.

    iOS 8 has brought a huge number of opportunities for developers, and as a result, a lot of goodies for us! Widgets, extensions, app interactions and more. For applications updated for iOS 8, the App Store has a separate tab that you should definitely view.

    When purchasing in a store, sellers offer to turn on and run iPhone 5 for free. But for some reason I didn’t want this service.
    The fact is that when other people do similar work for you, the question of how to set up iPhone 5 remains a mystery to you. Until, say, you buy a new gadget. But when else will this happen?!

    You can turn on and set up iPhone 5 for the first time in three ways:

    1. Restore from iCloud copies
    2. Recover from iTunes copy
    3. Set up as new iPhone

    But this is in theory, and in my version, when you purchase a device for the first time, and there is no data saved anywhere from previous similar gadgets, there is only the third option from among the above to set up iPhone 5, as they say, from scratch.

    True, after such an initial launch, I then had to manually copy all the contacts from the address book of the old Nokia into the new iPhone. But that’s a completely different story, that was later.

    1 We decisively turn on the new iPhone 5

    Let's return to the initial launch of the iPhone 5. First, connect the charger to it and make sure that the device's battery is not completely discharged. Otherwise, you need to charge it first, preferably up to 100%. On the screen when connecting iPhone to charger An image of the battery appears, and the numbers show the charge level - an intuitive picture that does not require much explanation.

    And so, turn on the power, press the button turn on iPhone. The initial “Hello” prompt appears (Fig. 1).

    Note. This is not the greeting that the baby elephant lost and did not convey to the monkey in the famous cartoon “Hello to the Monkey”:

    • “When I say hi, I’m sending you a good mood,” the boa explained.
    • And now Monkey has a “hello” and a good mood.
    • Oh, if only two more “hellos”…”

    The iPhone has a completely normal hello, which means that the device is starting to prepare for the initial setup.

    Rice. 1. The initial greeting is not in Russian after turning on the iPhone for the first time

    The greeting “Hello” now appears again, but in understandable Russian (Fig. 2).

    Rice. 2. The initial greeting is in Russian after turning on the iPhone for the first time

    Again, tap on the intuitive “Configure” inscription at the bottom of the screen (Fig. 2).

    A warning appears that we do not have a SIM card in our iPhone (Fig. 3). Here we answer “OK”, and we don’t have any options for choosing an answer - this is the only possible option: tap on “OK” (Fig. 3).

    Rice. 3. Warning about the need to insert into iPhone SIM card to connect to a mobile operator

    The SIM card, which the iPhone initial setup program warns us about, is needed so that the iPhone can be immediately connected to the network mobile operator.

    To be honest, I didn’t want to do this right away without understanding the initial settings of the device. Because you can rashly, without understanding it, inadvertently download something from the Internet during the settings, and then receive and pay a decent bill from the mobile operator. Why do this if, which can distribute, say, a laptop, and which in turn is connected to unlimited wired Internet - download as much as you want without restrictions!

    2 Understanding languages ​​and countries

    After refusing iPhone connections to the cellular operator’s network, select the language of communication with our device. I suggest doing this in Russian, unless, of course, you want to learn another language, for example, Chinese, at the same time as working on the iPhone! Tap on the inscription “Russian” (Fig. 4)

    Rice. 4. Selecting the language for communicating with iPhone

    Next, in the device settings, we are asked to select the country and region where we are located. It would seem why, since we have already indicated the language in which we will work with the iPhone. But not everything is so simple and obvious. After all, you can, for example, be abroad of the Russian Federation, but at the same time consider Russian the preferred language for communicating with the iPhone. Therefore, selecting a language and selecting a country and region are separate device setup operations (Fig. 5).

    Rice. 5. Selecting the country and region where we are located

    In Fig. 5 it is clear that Russia is not in the selection menu. Of course not, because Russia is spelled with the letter “R”, and we see in Fig. 5 only countries starting with the first letter of the Russian alphabet, the letter “A”. Therefore, we swipe up the country and region selection menu until we reach countries starting with the letter “P”. There we will see Russia, and tap on the name of our Motherland.

    Rice. 6. Selecting Russia as the country and region for initial iPhone setup

    By the way, I wonder how the choice of country is made if you select Chinese. After all, this language does not have an alphabet, so it is unclear how the countries are located there, in what order?

    As far as I know, the organizers of the 2008 Summer Olympics, which took place in China, faced the same problem. After all, on the opening day of the Olympics, countries must pass one after another in the strict sequence of the alphabet of the language of the country where the Olympic Games are taking place. But this is also a completely different story. We are returning to the initial settings of the iPhone 5.

    And then again a warning appears on the screen about the absence of a SIM card (Fig. 7). And there is no Wi-Fi, that is, the device is not connected to the Internet, and therefore cannot be configured further. As they say, we have arrived...

    Rice. 7. Repeated warning about the absence of a SIM card because there is no connection to Wi-Fi

    3 Connecting iPhone to the Internet via Wi-Fi

    We put the iPhone aside for a while without turning it off. And we start working on the Wi-Fi network - we try to launch Wi-Fi distribution using a laptop. But here an unexpected problem arises. In my laptop, the Internet access point has a very complex and long password. This was done by the laptop manufacturer to protect the access point from unauthorized connection. And I did not change this password.

    But entering this password manually is simply impossible. No one has ever been able to do this without making mistakes. The password can only be copied and transferred, say, inside a file, to a mobile gadget. But transferring any data to our brand new iPhone is not yet possible, because it has not yet been launched.

    What to do? The idea of ​​creating an access point using another gadget, using a smartphone, comes to the rescue. Fortunately, a smartphone can become an Internet access point for other devices. And here we can easily, let’s say for a while, make the password for accessing the Internet network simple and easy to enter using virtual keyboard iPhone.

    Of course, now we have to agree that we will spend mobile traffic smartphone connected to a mobile operator. You could immediately insert a SIM card into your iPhone. But we will be consoled by the fact that we will still try to operate the device from the Wi-Fi network, and not directly from the SIM card of the cellular operator. Let's practice, if I may say so.

    After a few minutes of waiting iPhone screen comes to life. And the first proposal to launch geolocation services appears (Fig. 11).

    Rice. 11. We refuse the offer to launch a geolocation service

    There is no need to start these services during the initial setup; it is never too late to do this later, when the iPhone is configured and starts working. Therefore, we will refuse to launch this service, for which we will tap on the inscription “disable geolocation services” at the very bottom of the screen (Fig. 11).

    5 Create an iPhone password

    The next step in the initial setup of the device is to create and enter a password to access the iPhone. From the moment this password is created, the device cannot be “reached” without this password. Therefore, you need to be responsible when creating a password. On the password entry screen you will be prompted to enter this password for the first time using a telephone keypad with numbers and Latin letters below them (Fig. 12).

    Rice. 12. Entering the iPhone password

    It is better to make the password only from numbers alone, since using letters will complicate the entry. If someone is confident in using a telephone keypad, they can also include latin letters. I repeat, I created a password of only 6 digits. And there’s a lot more that could have been done short password, for example, 4 digits like a PIN code.

    The password is then required to be re-entered to ensure that the password is entered correctly (Figure 13).

    Rice. 13. Re-enter your iPhone password

    The entered password now needs to be remembered or even written down! Remember forever, for the entire time you use your iPhone.

    6 Setting up programs and data on the new iPhone

    Now it is finally time to customize the software and data of our iPhone. You will be offered to configure them in several ways (Fig. 14).

    Rice. 14. Selecting options for setting up iPhone programs and data

    We choose the “Set up as a new iPhone” option, as we decided, since this is our first device and we don’t have any old copies in either iCloud or iTunes. And there is no need to transfer them from Android, which regularly distributes Wi-Fi to us, since neither programs nor contacts are needed from it, since this is not my personal device.

    So, select the “Set up as a new iPhone” option, tap on this inscription and wait until all the necessary settings are completed. But this is not the end of our “torment.” We will continue to configure the iPhone and prepare it for work.

    7 Opting out of setting up an account to access Apple services

    What a strange thing! For some reason, developers consider their users to be very advanced. Sometime at dawn personal computers at Windows setup Quite meaningful questions were asked, understandable for a Russian person, and at the very end of the setup a question suddenly arose about a certain page 866. Where does it come from, what is it? There are no explanations, but for the life of me, out of the blue, I need to configure it. And no reasonable explanations.

    Then it becomes clear, after some time, that we are just talking about consent to the use of the Russian alphabet when working with Windows. Well, then why not just ask, do you want Russian letters on your computer, or do you not need them? It is absolutely clear that you need to answer this question, of course, “Yes, yes, yes, and yes again!”

    Here come the developers Apple devices For some reason, we are sure that everyone in the world knows what an account for accessing Apple services, or “Apple ID,” is. And in the next step of the initial setup of our gadget, they offer to set up this account (Fig. 15).

    Rice. 15. Proposal to set up an account for access to Apple services, Apple services

    The most remarkable thing is that all these settings can be done quite easily later, when our iPhone is working. When setting up the gadget, you don’t need to enter accounts or anything like that.

    We need to start the device, and not try to configure a lot of things on it instead. Therefore, let’s refuse this “attractive” offer and tap on the inscription “Configure later in Settings” (Fig. 15 - here they even explain to us where we can make the missed settings)

    Despite the possibility of refusing Apple settings ID our gadget will be “surprised” at this reckless decision of ours, in the opinion of the iPhone. And we will be asked again about refusing to use this option (Fig. 16).

    Rice. 16. Repeated offer to set up an account to access Apple services

    And here we firmly answer “no!”, for which we tap on the inscription “Do not use” (Fig. 16).

    8 Acceptance of terms and conditions

    Abroad, in countries of developed capitalism, actions related to legal rules and restrictions are very developed. Citizens of these countries are almost never too lazy to read a dozen pages of small, close, tooth-breaking text about what can and cannot be done with anything:

    • with a microwave: is it possible to dry a cat in it?
    • with washing machine: Is it possible to wash dogs in it?
    • and the like.

    I agree that it is important to know this, to know exactly what is possible and what is not. Know what the manufacturer guarantees and what it doesn’t. But for some reason not yet in our country. Well, we don’t read these agreements! Perhaps someone is reading, I won’t talk about everyone. But the majority of our citizens are still not interested in legal subtleties.

    I will not comment on this or define it. That's how it is, and that's it. But our iPhone is clearly not Russian. Therefore, before starting to work with it, we are asked to read the terms and conditions, and. If you do not agree with these provisions, the device will not operate. Therefore, we have no choice as such. Regardless of whether you have read or not read the terms and conditions.

    Rice. 17. Acceptance of terms and conditions

    9 Refusal from Siri

    It would seem that this is happiness, we have accepted the terms and conditions - we can begin work. But that was not the case. We will now be asked to enable Siri.

    Siri is an interactive system that allows you to control your phone using your voice, which first appeared in iPhone models 4S. This means that it is also on our fifth model. But, again, Siri can easily be turned on later, once our iPhone is working. Therefore, let us also refuse this invitation by tapping on the inscription “Turn on Siri later (Fig. 18).

    Rice. 18. Refusal to turn on Siri

    A reasonable question arises: why are we offered all this during the initial setup of our gadget, if all these settings can be done later. The answer looks quite simple - these are just marketing moves by the iPhone manufacturer or its partners developing software for his work. Nothing more.

    The manufacturer believes that we are poorly informed about the capabilities of the device, and perhaps the manufacturer is right in this. But the manufacturer does not understand or does not want to understand that it is not so easy for us to master everything right away. Everything needs to be done in order. First set up iPhone 5, and only then explore all its limitless possibilities.

    However, the manufacturer thinks differently, and thus we have to refuse various options again and again, leaving their launch and study for later.

    10 Sending diagnostics

    Hardware and software mobile gadgets is constantly being improved. Manufacturers sometimes install new elements and new programs into these devices at their own peril and risk. And they do not always have time to test all this in the quiet conditions of their research laboratories.

    This is due to competition. If you test for a long time and do not bring the product to the market, you may be late, and the market will be occupied by “foreign” products. So you have to take risks.

    And since there is a risk, it means that there may be malfunctions in the operation of the device. To fix these glitches, iPhone developers are also patching special programs. These programs “catch failures”, somehow systematize them a little, and can send information about them to the manufacturer.

    Modern manufacturers are very fond of the information they receive about all the failures that occur, as this allows them to constantly improve their hardware and software. Therefore, we are offered to set up either automatic sending of information about any failures in the operation of the iPhone to the manufacturer, or refuse this option.

    Here you can advise both sending information and not sending it. Do not send the better, who will use the iPhone in mobile networks, and spend limited limited and rather expensive Internet traffic. You can send to those who will use the gadget more often, working via Wi-Fi and unlimited traffic.

    Skeptics may argue that mobile networks sending diagnostic messages does not consume significant volumes. Yes, of course it is. Until one day you receive a bill from mobile operator and you see very unusual figures, say, the cost of the Internet when you are in foreign roaming. After this, most often there is no desire to AUTOMATICALLY send or receive any unnecessary messages via mobile Internet.

    That's why we are in in this case let's refuse (just in case) automatic sending diagnostic messages in Apple company. To do this, tap on the “Do not send” inscription at the very bottom of the screen (Fig. 19).

    Rice. 19. Opting out of automatic sending of diagnostic messages

    11 The long-awaited start to work on iPhone 5

    And now, after all our numerous consents and refusals to include certain options brand new iPhone, we get the opportunity to start working on it. The message “Welcome!” appears on the screen. and the “Get Started” invitation.

    We tap on this “Get Started” inscription (Fig. 20)

    Rice. 20. Initial settings completed, we are asked to get started on iPhone

    That's what we've been waiting for! Patience and work will grind everything down. We can start working on the iPhone, install a SIM card in it, enter data into address book, call, send SMS, etc. The question “how to set up iPhone 5” was successfully resolved, hurray!

    You'll see icons on the screen that let you do a lot of things on your iPhone. But that's a completely different story...

    How to activate iPhone via iTunes

    For those who are ready to activate their new iPhone through iTunes, we can advise you to do the following.

    First you need to download iTunes software (the latest version) from the official developer website. Download the application according to the installed software on your computer.

    Install the application, connect the iPhone to your computer (a cable for this is included with the phone).

    The phone must be fully charged, and the SIM card must be in its place (in the appropriate compartment).

    Connect the Internet on your computer.

    Accept the terms license agreement, then continue the device activation process. Now proceed to filling out the required data. Double check them and click on “Submit”. The program will then automatically send the entered information to Apple. This activates both the warranty and the phone.

    Mobile iPhone phones It’s better to buy at Apple stores or special electronics stores to avoid problems with further activation of the device. Avoid dubious retail outlets, do not buy a phone second-hand or over the Internet from little-known sites.

    iPhone setup 8. If you've just bought a new iPhone - perhaps an iPhone 8 or iPhone 8 Plus - then you'll be looking for tips on how to set it up. Here's how to set up a new iPhone: either set it up as a brand new iPhone or restore it from backup copy iCloud or iTunes. There's something for everyone here, from beginners and iPhone to those coming from Android

    How to turn on iPhone 8? What options should I choose when configuring? I'm confused by the number of options: iCloud, location services, Siri, iCloud Key Chain, and so on.

    Setting up a new iPhone is usually very simple, but you're right - there are many options. If you just bought a new iPhone 8 or iPhone 8 Plus or received old iPhone family member or even received it as a gift (you will find it useful!). Here are a few simple ones, but useful tips by setting. What is the correct procedure for first activation?

    Setting up iPhone 8: 1) Are you upgrading from an old iPhone?

    Yes. Go to step 2.

    No. Go to step 6.

    Setting up iPhone 8: 2) Make sure you back up your old iPhone first

    If you're upgrading from an older iPhone, you can transfer all your apps, data, and settings to your new iPhone. But to do this, you need to back up (via iTunes or via iCloud) your information. In more detail, backup iPhone 5s, 6s, 7s, 8s,

    How to Backup iPhone Using iTunes

    It's worth checking that you're using the latest iTunes version before you start. Select "iTunes" from the menu and "Check for Updates." To back up or update your existing iTunes, connect your old device to the computer you usually sync with via USB, open iTunes, select your device, and click the Sync button.

    How to Backup iPhone Using iCloud

    If you're using one of the latest versions of iOS, chances are you'll be doing daily backup via iCloud.

    Make sure your iPhone has been backed up recently: your device will automatically make an iCloud backup once a day. As long as it's locked, connected to Wi-Fi, and as long as you have enough free space in your iCloud. You can find out when the last backup is copy iPhone was done. By going to Settings iCloud Backup and then checking below Backup Now.

    If it hasn't been backed up recently, you can manually force a backup. By opening settings and going to iCloud Backup copy, making sure that the backup iCloud copy enabled and select "Backup Now".


    Backing up via iCloud can take longer than backing up via iTunes, especially if it's your first time, so if you're in a hurry, it might not be the best option.

    Setting up iPhone 8: 3) How to set up a new iPhone

    Turn on your new iPhone 8 or 8 Plus by pressing and holding (for just a second or two) the oblong on/off button in the top right corner of the device. When the device is turned on, swipe the screen where it says "Slide to Setup." Apple will now guide you through several options. First you will need to select your language, country or region, connect to Wi-Fi, turn on location services. Then get the option to Restore from iCloud Backup, Restore from iTunes Backup, or set up as a new iPhone. Since you have a backup, select the appropriate option (we'll discuss setting up as a new iPhone below). How much has it increased?

    iPhone 8 Setup: 4) Restore New iPhone from iTunes Backup

    If you backed up through iTunes, connect your iPhone to the computer you copied your old iPhone to. iTunes will verify that you want to restore your backup as new. Select the Restore from this backup option. While the restore process is in progress, iTunes download progress may be paused. It will most likely take longer, so don't unplug your phone. When the restore process is complete, your new iPhone will turn on. Keep your device connected to iTunes to sync music and other media files. , does not find the network, does not see the network.

    Backup iPhone 5s, 6s, 7s, 8s, .

    iPhone 8 Setup: 5) Restore New iPhone from iCloud Backup


    If your old iPhone is connected to iCloud, you don't even need to connect your iPhone to your computer, although you will want to connect it to a power source. It must also be on a Wi-Fi network. In fact, you can set up your new iPhone without connecting it to your computer.

    When prompted to set up, select Restore from iCloud Backup, then click Next and enter your ID and Apple password. Select the backup of your old device and click Restore. Please wait until the device completes restoring from backup - it will take longer. Depending on how much data is in the backup and the speed of your Internet connection. What to do, does not find the network, does not see the network.

    When the recovery process is complete, your device will restart.

    Setting up iPhone 8: 6) Users upgrading to a new iPhone

    If you are moving from Android smartphone, BlackBerry or Windows on iPhone Apple, it should be relatively painless. You can make it easier to transfer your data to a new device if you set it up correctly the right ways. Make sure everything is set up correctly to begin with, and later it will be minimal problem. Comparison: which is better?

    How to activate your iPhone if you switched from Android

    Apple recently made the transition from Android to iOS much easier with a new Move apps to iOS, available in . You need to download it on your Android device and open it. Then on your iOS device you will need to find Apps & Data on the screen, which will only appear if your device is running iOS control 9 or later.

    If it's an older iPhone running on iOS versions 9 or later, follow the settings as if you were setting up a new iPhone. Then go to iPhone 8 Settings General Software Update and update to latest version iOS you offer. Then go to iPhone 8 Settings General Reset Erase All Content and Settings and start the installation process from scratch. This time during installation you will see the Apps and Data screen. how to download for free without iTunes?


    On Android device review the terms and conditions and then click “Agree” to continue. Click Next when the Find Your Code screen appears. Then return to iOS device on the Move From screen Android screen" and click "Continue". You should then see a ten-digit code that you need to enter into your Android device.

    You can now select the content on your Android device that you want to transfer to your new iPhone. Once you've selected everything you want, click Next and leave both phones alone. Until the download bar on your iPhone is completed. This can take quite a while, so be patient and don't click anything until it's done as you may lose your progress and have to start over. How to bypass the blocking?

    You can then follow the onscreen instructions to complete setting up your iPhone.

    How to Activate Your iPhone If You're New to Apple

    Turn off your iPhone and turn it on by pressing the On/Off switch. The welcome screen welcomes you by showing a "Slide to Customize" slider that rotates between different languages. What is the correct procedure for first activation?


    Here you can set up your device as a brand new phone.

    iPhone 8 Setup: 7) How to Transfer Email, Contacts and Calendars to Your First iPhone

    If you use a Gmail account or another POP or IMAP account for mail on your smartphone. It is already synchronized with the central server. You should be able to add this account to your new iPhone with few problems. Apple iOS has automatic setup for those who use Microsoft Exchange, Gmail, Yahoo, Aol or Hotmail; You will also be able to manually set up a POP or IMAP account for mail. LDAP or CardDAV for contacts or CalDAV for calendars.

    iPhone 8 Setup: 8) How to Sync Music and Movies to the World's First iPhone

    Use iTunes on your Mac or PC to sync music, TV shows, movies, and photos from your computer to your new iPhone. If your smartphone was not previously an iPhone, you will need to get the data from your non-Apple device to your computer and into iTunes. Once your music and movies are in iTunes, they'll be ready to sync to your new iPhone. Connect your iPhone to your computer, open iTunes, select your device, and select the music and movies you want to sync. If you have a large collection and limited space on your device. You can create playlists and set them to sync with your iPhone. how to download for free without iTunes. VKontakte music for iPhone.


    iPhone 8 Setup: 9) How to Sync Photos to Your First iPhone

    To sync photos to your iPhone, you'll need to add them to Photos on your Mac or your Pictures folder on your PC.

    iPhone 8 Setup: 10) How to Sync Non-iOS Apps

    Unfortunately, you can't transfer any Windows or Android apps from your old device to your iPhone. It is often the case that you will find parallel versions of these apps in Apple's App Store. Please note that if you purchased content through apps, such as Kindle books, you will be able to download an equivalent app to access the data in most cases.

    iPhone 8 Setup: 11) How to Import Contacts from a Really Old Phone

    If your phone has a nano-SIM card, you can transfer contacts. Copy all your contacts on nano-SIM to your old phone. Then, once you've set up your new iPhone, you can copy those contacts by replacing your iPhone's SIM card with your old nano-SIM by going to Settings Mail, Contacts, Calendars Import SIM contacts. Once the import is complete, extract your old SIM card and put the one you want. If your phone has a SIM card that doesn't fit the iPhone 5, but comes with a USB cable to connect to your computer. You can transfer your contacts (and your photos) by exporting them through the software. Will it support?


    iPhone 8 Setup: 12) How to Save My Old SMS and Text Messages

    SMS and MMS logs are not transferable, but you can save them from oblivion. It's not a simple process, but you can save them to your computer. There are many programs available to export messages from your smartphones - one option is SMS Backup & Restore for Android.

    Now check out iOS 11

    Spend some time getting to know your new phone. All iPad models and Apple's iPhones ship with iOS 11 and various applications provided by Apple for free. IN Apple App Store has thousands of apps that you can download. your new iPad or iPhone.

    Read more: