• How to use ultraiso. How to create a bootable USB flash drive with Ultra ISO under Windows XP

    This article describes key feature UltraIso programs. Bootable USB flash drive with its help it is created without problems. It is the algorithm for performing this operation that will be discussed further.

    In what cases can you not do without such a flash drive?

    First, let's define those cases when we cannot do without this important feature of UltraIso. A bootable flash drive allows you to install an operating system on a computer that does not have a CD-ROM drive. First of all, these are some models of ultrabooks and all netbooks. But, again, this does not mean that this method cannot be applied to a stationary personal computer (not on every system unit Now you can find a device for reading CDs) or a laptop. In general, this universal solution for all cases. All modern computers Without exception, they are equipped with a USB connector. So there will be no problems connecting a flash drive. At the same time, the installation speed operating system will be many times higher. Data transfers faster from a flash drive than from a CD. Therefore, this installation method is the future.

    Choosing an image

    Before you make a boot flash drive UltraIso, you need to select the correct installation version of the operating system. Its demo version can be downloaded from the Internet. It is recommended to use the *.iso format (that is, the file must have this extension). If necessary, it can be made from a CD. To do this, install it in the drive, launch UltraIso, press “F8” and, following the instructions, create a copy on the hard drive installation version operating system. It is important that the installer source is autoloadable. Although rare, there are times when this important option is missing from the installation version. Therefore, you must definitely pay attention to this.

    Which version of the program is better?

    UltraIso comes in two versions. The first one is demo and free. Some functions are not available, but the ability to create bootable flash drives is present. The second version is paid. It has more options, but to create such a flash drive, its purchase is not justified. Therefore, most users are recommended to take the first modification of UltraIso.

    Installing UltraIso

    First you need to download and install UltraIso. without this stage it is impossible. First you need to download this program from the official website. Other versions are not recommended to be used, as their performance leaves much to be desired. Then run the downloaded installer. Following the instructions of the wizard, install this program on your local computer. Some kind of additional settings there is no need to execute to create a bootable drive. After this, UltraIso is ready for use.

    Creating a bootable flash drive using UltraIso

    How to create a bootable USB flash drive? After installation is complete, the order of performing this operation will be as follows.

    Once the manipulations are complete, the process can be considered complete, and now you can easily install the operating system from the flash drive. Do not forget that the size of the flash drive must be larger than the operating system installer. That is, if the image occupies 4.4 GB, then the drive is in this case must be at least 8 GB. This nuance must be taken into account in mandatory. Otherwise you won't be able to create boot drive, and the operating system will display a corresponding message.

    Preparing to install the operating system

    On next stage you won't have to use it anymore Ultra program ISO. The bootable USB flash drive is ready. But in order to start the operating system installation process, you need to correctly configure the BIOS personal computer. We install the prepared drive in any of the rectangular connectors of the personal computer. Next, when you turn it on, you need to pay attention to the inscription: Press X to setup. In this case, “X” will be the key that you need to press to enter basic settings personal computer. If during the equipment testing stage the manufacturer’s logo is displayed motherboard, then you need to press “Esc”. It is not always possible to figure out the login key the first time and have time to enter the BIOS. Therefore, if you did not have time to click and the operating system started loading, then you need to restart the personal computer and repeat the operation of entering the basic settings, already knowing necessary information. Then, using the navigation keys (they have arrows on them), go to the item Boot menu(loading). In it we find the First Boot item. Point the marker at it using the down arrow. At the next stage, using PgUp and PgDn, we indicate to the PC that the first boot source is, for example, a bootable Windows 7 flash drive. UltraIso has already placed the image on it, and it is ready for the installation process. The volume label will be the same as previously specified. Once this manipulation is completed, press F10. Then you should be asked to save the changes. We answer it positively. After this, the personal computer will restart and boot from the flash drive will begin.

    Installation

    The installation process from such an operating system drive is identical to exactly the same procedure from a CD made in the same UltraIso program. A bootable Windows USB flash drive is his an exact copy. When the PC starts booting, press any key when the corresponding message appears. Then set the language, country, monetary units and click “Next”. At the next stage, click on “Install”. We select the one for which we have a key. Then we agree to the terms license agreement. To do this, check the box at the bottom of the window and click the “Next” button. At the next stage, select the installation type: complete or update. Then select logical partition, on which the OS will be installed. If necessary, format it using the appropriate command. Further, all operations are performed automatically until you need to set the PC name. Enter it and click “Next”. If necessary, set a password for protection. Then you need to enter the registration key. You can skip this step, but then you will have trial version for 31 days. Then select security settings, time and system date. Then we set up local computer network. At the final stage, drivers and application programs are installed.

    Resume

    This article describes one of the most important features of the UltraIso program. Using it, a bootable flash drive can be created without any problems, and even a novice user can solve this problem. To do this, just follow the previously described steps, and you should not have any problems with this procedure. So, feel free to take it and do it.

    Probably the most popular operating system today is the Windows operating system. Some people like the new one Windows version 8, for some Windows 7, and for others Windows XP just won’t leave.

    This program is installed directly from installation disk. But there is another option for installing the Windows operating system. You can create a special bootable USB flash drive.

    The bootable flash drive will ideal option, for example, for netbooks that are not equipped with disk drives. And, in general, a flash drive is more compact than an installation disk.

    To create a bootable USB flash drive, you can use several programs. But in our case we will use the Ultraiso program.

    First of all, you need to open the program itself. You need to open it with administrator rights. That is, you need to right-click on it and select "Run as administrator".

    It is worth noting that before the entire procedure you will need to download an image of the Windows operating system.

    Next in the program menu you will need to select the item "File" and select it "Open".

    Find the folder with the Windows image and open it.

    After all this, you will need to select the item in the program menu. Here we select a section "Record with hard drive» .

    After this, you will need to select the device to which the recording will be made. In our case it will be a flash drive. And we confirm our actions with the button "Record".

    It is worth noting that the size of the flash drive to carry out this operation must be at least 4 GB.

    After you press the button "Record" A window will pop up asking you to confirm your actions again, warning that all information that was on the flash drive will be deleted. You must confirm your actions.

    The recording will last for several minutes. After this time, the recording will be completed and you will receive an installation flash drive.

    /
    1. Hello admin! This is a question, I have a bootable flash drive with the Windows 7 operating system, I don’t remember how I created it, and I don’t have the image with “seven” at hand right now either. Is it possible for me to somehow make an image of my bootable flash drive and deploy this image to a flash drive of a friend of mine who urgently needs a bootable Windows 7 flash drive, but I can’t give him my flash drive.
    2. Hello everyone and I have a question! How to make a bootable flash drive image quick and easy? For this purpose I tried to use the ImgBurn program, but the image of a bootable flash drive with the Windows 7 operating system with a capacity of 8 GB turns out to be twice as large, moreover, the program still needs to be extracted boot entry from a flash drive, which also turns out to be more than 10 GB. For instructions, I used an article on the Internet, it seems that the author of the article himself has never created a bootable USB flash drive in this way, but he advises everyone.

    How to make a bootable flash drive image

    Friends! The fastest and easiest way to create an image of a bootable flash drive is with the UltraISO program. The ISO image created in this way can even be deployed to a completely different flash drive. Isn't it very convenient?

    Program website http://www.ezbsystems.com/ultraiso/download.htm. Download and run the program.

    Unfortunately, the program is paid ($29) and only allows you to work with files up to 300 MB for free.

    Your bootable USB flash drive with your operating system probably weighs more than 3 GB, so draw your own conclusions. Personally, I purchased this program and have never regretted it, since it has no equal when working with ISO images. UltraISO can create a bootable Windows flash drive 7, make a bootable flash drive image, change content ISO image and much more.

    Managing the program is incredibly simple, we drag our flash drive, in my case under the letter G: from the lower left window (list of PC disks) to the upper right window (list of contents of the new project).

    Add all files to drive G:? We answer Yes.

    We save the file, for example, on drive D: and give the file a name, for example Windows 7 64 bit.

    The process of creating a bootable flash drive image begins, which ends successfully.

    As we wanted, the bootable flash drive image file we made in ISO format located on drive D:.

    Deploy the image to another flash drive

    Let's now deploy the image to another flash drive.

    We connect another flash drive to our computer. File -> Open.

    An explorer window opens. Select with the right mouse our Windows image 7 64 bit on drive D: and click Open.

    Paragraph " Disk Drive"select our flash drive. The recording method is “USB-HDD+” and click “Burn”.

    We are warned that all information on the flash drive will be erased. We agree, click Yes!

    The process of creating a bootable USB flash drive.

    Success.

    I am successfully testing the flash drive. The flash drive is bootable and you can install an operating system from it Windows system 7!

    In exactly the same way, you can make an image of any bootable, as well as a simple flash drive, and in the future, if necessary, deploy this image to your flash drive or someone else’s.

    Note:

    If you transfer an image to a flash drive in NTFS format, and at the output you get a flash drive in FAT-32 format, then this is why it happens. IN normal mode UltraIso automatically reformats the flash drive to FAT-32 and it doesn’t matter that it was a file one before NTFS system. In order for the flash drive to remain in NTFS, you need to select ExpressBoot in UltraISO, then click on ExpressWrite, as a result, when you unpack the image onto the flash drive, the file system will be unchanged.

    If the program is not fully functional, for example UltraISO does not offer the choice of recording to USB. Then you just need to run the program as an administrator. This is done by right-clicking on the program shortcut and selecting the appropriate action!

    For Windows installations is necessary either boot disk with the distribution kit, or a bootable flash drive. Flash drives in lately are very popular and convenient, so it makes more sense to download from them.

    There are many ways and applications to create bootable flash drives. The easiest way to do this is with the Ultraiso program.

    It is very functional and at the same time easy to use software tool . For it to function, you must first complete the installation by downloading the program distribution kit, and also prepare an operating system image.

    Why make an installation flash drive?

    Often, during the operation of the operating system, unforeseen situations occur, as a result of which the operating system either does not load at all or operates with critical failures. It is impossible to completely protect yourself from such situations, so you need to know how to behave.

    IN best case scenario Operating system problems can be fixed through a built-in function Windows recovery, which naturally needs to be launched if this feature is present.

    In a situation where this is not possible, you should try to boot through the installation disk or installation flash drive.

    Photo: create a bootable USB flash drive in UltraISO

    An extreme situation that occurs when there is no backup copy operating system and user data, implies its reinstallation. Based on this, you always need to have an OS image. It can be used for new installation, restoring the old OS or reinstalling it.

    In most situations Windows distribution saved on DVD. But the likelihood of data loss on a DVD disc is significant due to the fact that it is subject to physical impacts. After all, just one small scratch can render the disk inoperative.

    A flash drive does not have this drawback, so it is more advisable to save the operating system on it. In this case, the process of installing Windows from a USB drive is similar to the installation process from a DVD. An additional advantage of a flash drive over DVD is its more compact size.

    We will need

    To create a bootable USB drive, in addition to the data carrier itself, you will need an operating system image and a specialized program with similar functionality. There are many such programs, but we will look at the UltraISO utility, which must first be downloaded and installed on your hard drive.

    It is designed specifically for working with ISO images and recording them on storage media; it allows you to make bootable disks and flash drives. The undoubted advantage of the utility in question is its friendly Russian-language interface.

    In addition to generating and recording image files, it also allows you to make changes to disk images. Its important feature, which is of great value, is the ability to create bootable media– disks and flash drives. In addition to this, the utility is capable of converting image files to ISO format, if existing image OS disk will be saved in a different format.

    A certain disadvantage of this utility can be considered that it is paid, but there is a trial period for free use. You can use the version for free UltraISO programs with certain restrictions.

    It is important to know that all information from the flash drive must be saved to another safe place, since all data will be destroyed when creating the installation flash drive.

    Video: bootable USB flash drive using Ultraiso

    If there is no OS image

    Situations often occur when the operating system image is missing. The solution to this problem is very trivial. It can be created either using a Windows installation disk, or through specialized programs, of which there are a great many, some of them completely free.

    The sequence of actions is as follows:


    Create a bootable USB flash drive using UltraISO

    Let's look at the sequence of steps to create a bootable Windows 8 USB flash drive from an ISO image. Bootable flash drives with previous operating systems are created similarly without any visible differences.

    Algorithm:

    1. you should run the UltraISO utility as a user with administrator rights workstation;
    2. at the top of the utility window you need to click the “Open” button;

    3. in the explorer that opens, select the required (previously saved) operating system image (in our Windows case 8 Pro) and confirm the action by clicking on the “Open” button. In this case, an image of the operating system will be displayed in the right half of the utility window;
    4. insert the flash drive into the appropriate slot, which will subsequently become bootable. Its volume should not be less than 4 GB, otherwise the OS image simply will not fit on it. It is also important that it is formatted as file system FAT32. It can be formatted directly before recording the image, or with standard using Windows or using UltraISO;
    5. then in active window applications should select “Bootloading”, and then in context menu select the menu item “Burn hard disk image...”;

    6. After opening the window, you need to check that you have selected the correct disk to create the installation media. It is important to make sure that the flash drive corresponds to the correct letter of the alphabet;
    7. on the “Recording Method” tab, you must check "USB-HDD+", and then either format the storage medium or record the Windows OS image;
    8. in case external media information has already been pre-formatted, then you should click on the “Write” button;

    9. A “Hint” window will open with a warning about the possible loss of all data on USB drive. In this window you need to click on the “Yes” button;

    10. Then the stage of forming the OS image on the flash drive begins. An installation flash drive for Windows is being created. The length of time it takes to create installation media depends on the performance of your workstation. After some time, the OS image will be written to the flash drive. A message will appear in the window that opens, informing you that the installation media generation process has been successfully completed;
    11. When you finish creating the installation drive, it is recommended to close the utility.

    At the end of these steps, it is recommended to make sure that the Windows OS image is correctly formed on the USB drive. When you open it, the saved Windows 8 image will be displayed. The sequence of actions when creating a Windows 7 OS image is similar and does not contain any significant differences.

    It is important to know that to install Windows in the BIOS you need to set the boot order various devices. You need to start attempting to boot from a flash drive.

    Photo: boot order of various devices

    The need for a bootable USB flash drive arises periodically. The reason for this need may be failures in the operating system itself and interruptions in the operation of the hardware. No one can protect themselves one hundred percent from such problems, but having a pre-created bootable flash drive will help solve the problems that arise without time loss and significant labor costs.


    There are several basic ways to make a bootable disk or flash drive.

    The main ones:

    Even the most untrained user can easily create a bootable USB flash drive with Ultraiso, since the program is very clear and convenient.

    The new version of Windows, which, as we know, will be the last, has received a number of advantages over its predecessors. It has new functionality, it has become more convenient to work with and it has simply become more beautiful. However, as you know, to install Windows 10 you need the Internet and a special bootloader, but not everyone can afford to download several gigabytes (about 8) of data. This is why you can create a bootable USB flash drive or boot disk with Windows 10 so that the files are always with you.

    UltraISO is a program for working with virtual drives, disks and images. The program has very extensive functionality, and it is rightfully considered one of the best in its field. This is where we will make our bootable Windows 10 USB flash drive.

    How to create a bootable USB flash drive or disk with Windows 10 in UltraISO

    To create a bootable USB flash drive or disk, Windows 10 must first be downloaded to a media creation tool.

    Now we launch what we just downloaded and follow the installer’s instructions. In each new window, click “Next”.

    After this, you must select “Create installation media for another computer” and click the “Next” button again.

    In the next window, select the architecture and language of your future operating system. If you can’t change anything, then simply uncheck the “Use recommended settings for this computer” box.

    After that, specify the path for your ISO file and click “Save”.

    After this it will begin Windows boot 10 and saving it to an ISO file. All you have to do is wait until all the files are downloaded.

    Now, after Windows 10 has successfully loaded and saved to an ISO file, we need to open the downloaded file in the UltraISO program.

    After that, select the menu item “Boot” and click on “Record” image of a tough disk" to create a bootable USB flash drive.

    Select your media in the window that appears (1) and click Write (2). Agree with everything that pops up and then just wait for the recording to complete. During recording, the error “You need to have administrator rights” may pop up. In this case, you need to look at the following article:

    If you want to create a bootable Windows disk 10, then instead of "Burn hard disk image" you should select "Burn CD image" from the toolbar.

    In the window that appears, select the desired drive (1) and click “Burn” (2). After this, we wait for the recording to complete.

    Of course, in addition to creating a bootable Windows 10 USB flash drive, you can also create a bootable Windows 7 USB flash drive, which you can read about in the article at the link below:

    With these simple steps we can create a bootable disk or bootable USB flash drive for Windows 10. Microsoft understood that not everyone will have access to the Internet, and specially provided for the creation of an ISO image, so this is quite simple to do.

    Read more: