• A program to connect your phone to your computer. Connect your Android phone to your computer as a USB flash drive

    Knowing how to connect your phone to your computer, you can take advantage of this opportunity to directly transfer data from one device to another.

    Moreover, without the help of the Internet, and with enough high speed.

    This may be necessary, for example, to transfer photos from a smartphone camera or multimedia files from a computer to a mobile device to a PC.

    After installation on the smartphone, the program requires launching, after which it shows the address that you need to write in address bar"Explorer" on the computer.

    This provides the ability to access mobile device data as if it were a regular folder.

    Moreover, the user can change, delete and add new files and removable disk, both in internal and external memory.

    USB connection

    When connected via USB, the user receives maximum opportunities:

    1. Transfer data at high speed;
    2. Turn on your smartphone as a webcam and communicate using it, for example, on Skype. This option will be the best for users whose PC does not have a camera.
      This is especially convenient considering that modern phones have image resolution at the level of the most expensive video recording devices.

    Advice! Using this connection method, you can access internal memory smartphone – wireless connections This is not always possible.

    The disadvantage of this method is the connection of the mobile device to the computer.

    At the same time, it will not be possible to make calls from it or go to another room while data is being transferred.

    All that is required to connect is a cable (usually microUSB/USB) and a free port on the computer.

    In most cases, you don’t even need to install any drivers - just select the storage, modem or webcam mode on your phone.

    In this case, it is even possible to use a computer as charger.

    When connecting your phone via USB using a cable, you will notice a notification at the bottom about connecting a new device.

    After installing the appropriate drivers (usually requires connecting the PC to the Internet), synchronization is completed automatically.

    At Bluetooth available on a laptop or, which is much less common now, on a PC, you can synchronize two devices using such a wireless connection.

    To do this, both modules are activated and a search is carried out on the computer compatible devices.

    When the smartphone is found, it is connected via Bluetooth, choosing the option without using a passkey.

    Possible problems

    Sometimes when connecting or attempting to connect, the computer begins installing devices and drivers. All that is required of the user is to wait until the process completes.

    If you install automatically control program failed, this is done manually.

    Usually the driver is located on the website of the smartphone manufacturer.

    Sometimes situations arise when, for proper synchronization, you have to enable debugging on your phone. The developer menu is usually used for this.

    After debugging, problems with connecting to the computer disappear.

    Some models of mobile devices with less common operating systems (for example, old Windows versions Mobile or BlackBerry OS) may not connect to your PC right away.

    To fix the problem, an option that can help is to first connect the switched off phone, and only then turn it on, causing the computer to first detect the smartphone, and then automatically or manual installation drivers.

    You can connect your phone to your computer in various ways, including via USB. Let's consider possible ways connecting any phone to a computer or laptop.

    Standard connection via USB cable

    Various ways to connect a mobile phone to a PC

    The methods for connecting a PC to a phone are simple. Here's how you can perform the necessary manipulations:

    • bluetooth;
    • Wi-Fi;
    • programs;
    • drivers.

    Some of these methods are considered the most common in use, and some are not. For example, connecting via a cord is widely used due to the simplicity of the method. Let's look at each method of connecting a phone in more detail.

    Bluetooth: necessary manipulations

    Connecting your phone to your computer is easy. The first thing you need to do is turn on Bluetooth on your mobile device. Next you need to carry out a number of actions on your personal device:

    1. Go to the “Networks and Internet” section.
    2. Select the “add” section wireless device to the network."

    Next, the PC will begin searching for an available device. When required device will be detected and synchronized with it. To do this, you need to enter random numbers on your phone. The same numbers must be entered on the laptop.

    This is where the connection ends. You can carry out the necessary actions.

    Connecting a smartphone to a computer via Bluetooth

    You need to keep in mind that older PC models do not support Bluetooth. Because of this, some users should cross out this method of solving the problem.

    Wi-Fi: how to synchronize Android correctly with a computer

    Wi-Fi is a system that works wirelessly using radio channels. This system works thanks to an access point. There are several ways to connect a smartphone to a PC.

    Wi-Fi is available on everyone modern device. To connect your PC to your phone via Wi-Fi, you need to take 3 simple steps:

    1. Activate Wi-Fi on your computer.
    2. Start searching for a wireless connection.
    3. When the devices are found, all that remains is to enter the PIN code in each of them.

    This case may be relevant when special drivers are installed on the PC. But this is not difficult to fix. You need to install the software on your computer.

    You will need to get the AirDroid program. Subsequently, it will attach an IP address to the phone. Then you need to enter it into the address field of your PC. That's it, after that you can carry out all the necessary actions. Synchronizing Android with PC is quite clear and accessible.

    Synchronizing devices via Wi-Fi

    And again important point- Wi-Fi is also only available on modern computers and laptops. On older models, users will not be able to find it.

    Cord: how to connect your smartphone correctly to your computer via USB

    Most convenient way connecting one device to another is a USB cable. This method is available to everyone. Here's why this method is the most convenient:

    • The cord is almost always included in the kit, and if you don’t have it, you can easily visit an electronics store and buy it, the cable is inexpensive;
    • The cord can be used not only to connect to a PC, but also to a laptop, netbook;
    • no supporting software required.

    That is, if you need to connect your phone to a PC, it is better to do it this way. It takes the least amount of time when copying a large amount of data.

    A standard connection looks like this:

    1. One end of the cord must be connected to the phone, and the other to a personal device.
    2. Once the connection is successful, the computer will display an icon with the connected device.
    3. To go to the contents of the phone, you need to double-click on its icon.
    4. This will open access to the phone’s internal memory and SD card.

    After selecting the required path, all that remains is to find required folders. You can clearly see that connecting your phone to a computer via USB is not difficult, but there are some nuances here too.

    Connecting your phone to your computer via USB

    USB connection depending on operating systems

    Since there are several types of operating systems, users experience logical question: how to connect under a particular operating system.

    For example, how to connect an Android smartphone to a Linux PC. In fact, it is now possible to make such a connection. This will require a program written by one of the professionals to solve a specific problem. These programs resolve conflicts between operating systems.

    However, it is not always so easy to find the necessary program. Therefore, it would be more logical to install the usual Windows 7.

    Windows 7 operating system: connection

    Initially installed on Windows OS special utilities, which allow you to seamlessly connect your phone to a personal device. Only the connected device can be used as a data storage device. And in a smartphone, when connecting via a cord, you need to select the line “connect as a multimedia MRI device.”

    Mac: connection

    To connect a Mac to Android via cable, you need to download a certain program - Android File Transfer. It allows you to connect one device to another. Essentially, the program changes the MRI protocol into a protocol that is compatible with Mac. In this case, pairing the phone and computer occurs without surprises. This program must be downloaded to your phone.

    Types of cords for Samsung on Android

    To connect a Samsung smartphone to a computer, you must have any cable with micro USB connector, and on the other a USB connector.

    If such a cord was not included in the kit, you don’t have to worry, as it is widely available and cheap. This is due to the fact that manufacturers began to produce connectors of a single size. This is a smart solution that has simplified many tasks.

    There are several types of cords of this type in stock:

    • standard cord;
    • adapter;
    • adapter and adapter for different drives;
    • adapter for several ports.

    The difference may also be in the length of the cord, the number of volumes. This variety helps you find best option, which could become useful tools for work.

    Samsung connection software

    Often, each phone model requires a specific approach to connect. For example, to manage 100% Samsung, you will need to download certain software. Here are utilities that can be really useful:

    • Samsung ExpressConnect;
    • SGS3 Easy UMS;
    • Samsung Kies;
    • Samsung PC Studio 7.2.

    But most often there is no need to download certain programs for successful connection. Standard software is quite enough. Only if you have problems connecting, you can turn to these utilities.

    Why can't my PC detect a phone connected via a USB cable?

    Typically the USB cable is 3mm thick. If personal device does not see the phone, then most likely the problem is in the cord. Maybe he low quality. If the quality is low, this is a completely acceptable cause of the problem.

    This could also be due to a lack of signal. That is, there are no signal wires in the wire. It turns out that such an incorrect cord cannot be used.

    You can only worry if there have always been problems with connecting via the cord. That is, the user has already changed the cord several times, but the problem has not been solved.

    Then the optimal solution is to take the personal device to a specialist. Suddenly the problem is buried somewhere deep and requires the attention of a professional.

    Conclusions

    Connecting Android to computer in various ways

    With a certain approach, users should not have any problems connecting their phone to their computer. But if this does happen, don’t worry.

    You just need to think about the possibility of downloading drivers or programs. Or maybe you need to think about replacing the USD wire.

    As practice shows, eliminate possible problems not difficult. The main thing is to apply the right solution.

    While using an Android device, users are faced with the need to transfer data from a smartphone/tablet to a PC and vice versa. More often this is due to the need for backup – video or multimedia files. Let's look at how to synchronize Android with a computer, as well as convenient alternative methods.

    How to synchronize on Android

    Synchronization methods are divided into 4 categories:

    • Direct connection via USB cable.
    • Wireless connection – Bluetooth or Wi-Fi.
    • Network connection– cloud disks.
    • Using file sharing programs.

    Synchronizing an Android phone with a computer via a USB cable is the simplest and most affordable way, not requiring additional equipment or Internet access. Direct connection ensures fast data transfer and eliminates connection loss.

    What is the best way to synchronize your phone with your computer?

    Connecting Android to PC via USB– accessible and simple, no need to deal with settings. After connecting, do not forget to set the type on your smartphone or tablet MTP connections or USB Mass Storage (a selection window appears immediately when connecting USB; but you can select it later - lower the curtain and click on the “USB connection” notification).

    Sync your phone with your computer wirelessly– more convenient, simpler, and often faster, since it takes less time to detect and connect the device. Data transfer speed is not limited USB port, which sometimes allows you to move data faster. In this case, sometimes the transmission is interrupted when the signal is broken and additional equipment is required - Wi-Fi router, Bluetooth module etc.

    Android synchronization network method , does not require physical presence near the PC, as in the first two methods. And to send and receive information, an Internet connection is enough. In this case, you need to establish a connection with a cloud disk that acts as a buffer for data exchange. The capacity of such storage facilities, for free use, does not exceed 15-50 GB, and there are also restrictions on the amount of traffic.

    Using synchronization programs, allows you to transfer specific files - contacts, messages or call history, which is not unavailable in the other three methods. Moreover, you can transfer data directly from your PC or at a distance. To do this, you need to install the appropriate programs, often distributed for a fee.

    Method 1: Sync via USB cable

    To exchange information you will need a synchronization cable. To improve bandwidth It is advisable to use a standard cord, as well as a USB 2.0 connector or higher.

    Algorithm of actions:

    1. Set the connection type to MTP or USB Mass Storage on your smartphone/tablet. The corresponding parameter is contained in the settings section - connection or memory, or less often in the settings for developers.
    2. Wait until the computer detects the device and searches for drivers. If unsuccessful, you need to download and install drivers for the mobile device.
    3. Afterwards, you need to open “My Computer”, then the connected drive in the “Devices with Removable Storage” category, where the internal and external memory devices.

    As you can see, connecting via USB is simple.

    Method 2: Android synchronization using a wireless connection

    When using a wireless method of exchanging information, it is better to use FTP connection. For this it is enough to have home Wi-Fi router:

    1. Before you start, you need to download the Moto File Manager application or an analogue that can automatically create an FTP connection.
    2. Open in the application hidden panel and select “Remote control”.
    3. In the new window, select “Connect” and, if necessary, configure your login and password.
    4. The application will create an FTP connection and indicate the address for the connection, which must be entered in the address bar file manager on PC. After this, access to the device’s memory will open for information exchange.

    Method 3: Network connection

    Android synchronization with PC via network method, requires registration and connection cloud drive. If your device is connected Google account, then register another storage facility at the request of the owner.

    How to synchronize Android using an example Google drive:

    1. To access files on cloud storage, a corresponding program is necessary for PC. File sharing via a web browser is also available, but this method is less convenient.
    2. To send files to your PC, you need to go to Google app disk, select “send files” and confirm the action. Most applications support integration with other programs, so just mark the files, click the “share” button and select a cloud drive.
    3. After downloading the files, which is affected by Internet speed, synchronization of the PC with Google Drive will automatically begin.
    4. To send data from a PC to a mobile device, you need to copy the files to the appropriate folder on the PC, which will appear after installing the program.
    5. Wait for the synchronization to finish, then log in to your smartphone. Google client disk for downloading or viewing information.

    Method 4: Data exchange programs

    This method involves installing the appropriate program on your PC, for example MoboRobo or AirDroid. We will look at how to synchronize Android using MyPhoneExplorer as an example:

    1. First you need to download and install the program, including your mobile device.
    2. After starting the program, you need to select the desired connection type: Wi-Fi, Bluetooth or USB cable.
    3. Launching a program on a PC, where you need to go through several setup steps - connection, launch, appearance programs, etc.
    4. Next, the application will prompt you to enter the user name necessary to identify the mobile device. Enter an arbitrary name.
    5. A window will then appear notifying you that the synchronization has occurred. After which it will be possible to transfer multimedia data, contacts, messages, etc.

    Conclusion

    Synchronization on Android is performed using one of the methods suggested above. Each method comes with some requirements, but in return offers additional convenience or functionality. So connecting via a USB cable is the simplest and least expensive. Wireless method synchronization is more comfortable, as it eliminates the need for regular USB pairing with a PC. A network connection offers additional information security. A specialized programs allow you to: synchronize contacts phone book, messages, calls and media files. Therefore on the best way synchronization is influenced by personal requirements and the tools available for this.

    Many users, when trying to connect their phone to a computer using a USB cable, are faced with the fact that the computer does not recognize the connected gadget. The connected device is charging, but there is no access to the smartphone itself and its internal contents. I also encountered this synchronization problem, and in this material I will tell you why the computer does not see the phone via USB, and I will also share various methods for solving it this issue.

    I would divide the whole complex of reasons for the problem that the PC does not see the smartphone via a USB cable into hardware and software, and below I will list each of them, simultaneously providing instructions for correcting it. But before using the methods I indicated, try restarting your computer and smartphone - this does not help as rarely as it seems. This problem mainly occurs with devices from Samsung, Lenovo, HTC, LG and Fly.

    So why doesn’t the computer see the phone via USB, but charges - hardware reasons

    1. The cable is damagedUSB. It often happens that the cause of this dysfunction is damage to the USB cable itself. Cables from little-known or “non-name” manufacturers do not have a large margin of safety, and can fail literally within a couple of months from the start of operation, and as a result, the computer will not recognize the connected phone.

    In addition, even the most reliable cables from global brands are subject to stochastic damage - they can be accidentally damaged during use, chewed by pets or spoiled by children. Therefore, first of all, inspect your USB cable for the possibility of mechanical damage, and, if the cable is externally intact, try using it to connect your device to another computer. If the device is not recognized on another PC, try replacing the cord.

    2. The port is damagedUSBon the computer. USB ports used on a computer are also susceptible to various mechanical damage, including damage USB controller, and also south bridge motherboard. Try inserting the cable into another USB connector, if this did not help fix the connection of the phone to the PC, follow further advice.

    3. The cable socket on the phone is damaged. Has water entered the smartphone socket or is it damaged? If yes, then it needs to be replaced.

    4. Try to remove the battery. According to reviews from some users who also had a problem with the computer not seeing the phone through US-ES-BI, removing the battery from the smartphone helped.

    Turn off the battery, remove the battery from it for a few seconds, then put it back, and turn your device back on.

    If nothing helps you fix it this problem, then describe your situation. What have you already done and what is happening to your Android device at USB connection gadget for PC in the comments, I will try to help not only me, but also everyone who has encountered this problem.

    The computer does not see the phone via USB - software reasons

    After describing the hardware reasons, we list the main ones software reasons, if your computer still does not recognize cell phone, connected using USB cable, follow further instructions.

    1. Working with the settings.We go into the settings of our device, select “Memory” there, click on the three dots at the top (Properties), select “USB connection to a computer” and check the box next to “Media device” (“ USB drive"). If you have a tick opposite USB usage like a modem - remove it.

    Must be enabled on PC Windows service Update (for downloading phone drivers) and new device detection service. Don't forget to unlock your phone when connecting to your computer, this is important.

    If you are a conservative and have Windows XP, download the MTP (Media Transfer Protocol) for XP from the Microsoft website and install it on your computer.

    2. If your drivers are lostUSB-ports, the computer may not see the phone.If drivers for USB ports malfunction, the latter simply stop working. To fix this problem install USB drivers from the “native” disk with drivers for the motherboard of your PC, or download fresh drivers on the motherboard manufacturer's website.

    Also, due to some reason, power may be turned off for a number of ports.

    3. Device drivers have crashed. Go to Device Manager and see if there is a question or exclamation point in the "Portable Devices" section.

    Check if your device is there and make sure it is working properly by right-clicking on it and clicking “Properties”. If it is not there, or you have doubts, remove the driver, disconnect the phone from the computer, and then turn it on again, and let the system install the driver again. This may help solve the problem that the smartphone does not connect via USB to the computer.

    It will also not be superfluous to go to the website of the manufacturer of your smartphone and download the latest drivers for it to your PC (for example, for Samsung there is special software Samsung Kies).

    4. Install the updateK.B.3010081 (K.B.3099229). For Windows 10 owners, you may need to install update KB3010081, which is responsible for working with Windows Media Player. This player is directly linked to normal operation MTP (Media Transfer Protocol) services, so download and install the update data.

    Also common cause There may be an unreliable build of the OS itself on the PC. Only reshuffling Windows will help here working version.

    5. Custom firmware is not working. The desire of many fans to play with the firmware for their Android device can do them a disservice in the form of the device’s failure to work normally with the computer. Try to restore standard firmware or restore from backup (if available).

    There are no drivers for the phone on the computer

    Although, usually, a computer with the latest OS detects and sees a smartphone via USB without problems, the opposite cases may also occur. Try looking for a driver for your smartphone on the Internet; sometimes a driver for similar models of the same brand may be suitable.

    The phone may not be detected by the computer due to viruses

    Trite, but all kinds virus programs may block work with external mobile devices. Try checking your computer with Dr. antivirus applications. Web CureIt!, in some cases this may help.

    If the problem of the computer detecting a mobile device is not resolved, reset the settings

    If still, your computer does not see the phone via USB, resetting the smartphone settings using Hard Reset. Go to your phone's settings, select the menu item " Backup", and in it select "Data reset".

    But I warn you right away that you will lose your files and settings located in the internal memory of the phone (files located on the SD card will remain untouched), so this item should be used only as a last resort!

    Conclusion

    As you can see, problems with the lack of visibility of a connected phone on a PC can be both software and hardware in nature, and there are a considerable number of such problematic factors. I would advise you to first pay attention to possible mechanical damage in the cable and device, and only then move on to software methods.

    In many cases, simply rebooting the smartphone (temporarily removing the battery), as well as working with the phone’s USB connection settings, can help. If all of the above does not help and the computer does not see the phone via USB, but is charging, then you may need to contact a qualified service center.

    P.S. For those who like visual demonstrations, I present a video on the issue:

    • Personal computer with operating system Windows XP or Windows Vista
    • Mobile phone
    • To connect to a computer you will need a USB cable or Bluetooth (must be in both your phone and computer)

    Step 1. Choose a connection method

    Data transmission via cable is the most reliable and affordable of all methods. File transfer speed wireless connection Bluetooth is smaller than cable transmission, but it is not necessary for the phone to be near the computer: the range of Bluetooth ranges from 10 to 100 m.

    If the device is connected for the first time, modem drivers will be installed. This is usually done automatically, without user intervention. If the installation wizard appears, simply select "Automatic installation" or follow the instructions for installing drivers from the disk that came with your phone.

    Step 2. Connect the phone

    Connection via cable

    Connect your phone to your computer using a cable. A notification will appear in the lower right corner of the screen in the notification area of ​​the taskbar indicating that a new device has been detected. Wait half a minute. The phone is ready to use.

    Often after connecting the phone, the computer begins to detect and install various devices with unclear names, in this case just wait until the end automatic installation or install the driver following the system prompts.

    Bluetooth connection

    First, let's turn on Bluetooth on your phone and computer. After this, you need to connect the two devices (create a pair). To do this, go to the control panel, click on the shortcut " Bluetooth devices". A window for setting the parameters of the Bluetooth adapter appears. In the window, click the "Add" button, the search for available devices begins. After a few seconds, the computer will display the search result and display all available devices. The last step is to choose required phone number double click and in the next step click on “Do not use access key”. Click "Next" and wait for the wizard to finish setting up.

    Read more: